Customize this spec with SpecWizard
Download SECTION 09 90 00 - Painting and Coating for
WORD | RTF | Text | Word Perfect
Find over 500 more CSI Sections
on Arcat.com
Switch to Masterformat 95
 
SECTION 09 90 00 - Painting and Coating
 
 
PAINTS AND COATINGS
** NOTE TO SPECIFIER ** Rodda Paint; Paints and Coatings.
.
This section is based on the products of Rodda Paint, which is located at:
6107 N. Marine Dr.
Portland, OR 97203
Toll Free Tel: 800-452-2315
Tel: 503-737-6033
Fax: 503-737-6004
Email: request info (jmcintyre@roddapaint.com)
Web: www.roddapaint.com
[ Click Here ] for additional information.
Rodda's strength is its diversity of product and its dedication to the commercial, industrial and coatings application markets. Rodda Paint has the Northwest's largest selection of product offerings for both the professional user and the do-it-yourself homeowner.
Our extensive product offerings, our technical expertise, and our highly skilled customer service staff offer unmatched support for architects, designers, builders, painting contractors, property managers, large industrial coatings users, and today's demanding consumers.
With 53 stores in Alaska, Idaho, Montana, Oregon, and Washington, Rodda Paint Company is close to major commercial centers throughout the Northwest. Please feel free to contact us with any questions or for information about your coating req'ts.
See our SpecWizard: Click Here
 
PART 1 GENERAL
 
1.1
SECTION INCLUDES
 
** NOTE TO SPECIFIER ** Delete items below not required for project.
 
A.
Surface preparation and field painting of exposed exterior items and surfaces.
B.
Surface preparation and field painting of exposed interior items and surfaces.
C.
Surface preparation and field painting/sealing of Specialty Surfaces that do not have factory-applied final finish.
1.2
RELATED SECTIONS
 
** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.
 
A.
Section 05 50 00 - Metal Fabrications.
B.
Section 06 20 00 - Finish Carpentry.
C.
Section 07 10 00 - Dampproofing and Waterproofing.
1.3
REFERENCES
 
** NOTE TO SPECIFIER ** Delete references from the list below that are not actually required by the text of the edited section.
 
A.
ANSI A13.1 - Scheme for the Identification of Piping Systems.
B.
ANSI Z535.1 - Safety Color Code.
C.
ASTM D 16 - Standard Terminology Relating to Paint, Varnish, Lacquer, and Related Products.
D.
ASTM D 3359 - Standard Test Methods for Measuring Adhesion by Tape Test.
E.
ASTM D 1653 - Standard Test Methods for Water Vapor Transmission of Organic Coating Films.
F.
ASTM E-96 - Standard Test Methods for Water Vapor Transmission of Materials.
G.
ASTM D 412 - Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers - Tension.
H.
40 CFR 59, Subpart D National Volatile Organic Compound Emission Standards for Architectural Coatings.
I.
Fed Spec - TT C-555B - Wind Driven Rain Test.
J.
SSPC, The Society for Protective Coatings - Web Site http: www.sspc.org :
1.
SSPC-SP1 Solvent Cleaning.
2.
SSPC-SP2 Hand Tool Cleaning.
3.
SSPC-SP3 Power Tool Cleaning.
4.
SSPC-SP6 Commercial Blast Cleaning.
5.
SSPC-SP7 Brush-Off Blast Cleaning.
K.
PDCA Paint and Decorating Contractors of America - Web Site http://www.pdca.org:
1.
PDCA Standards P1 through P15
1.4
SUBMITTALS
 
NOTE TO SPECIFIER ** Delete references, such as LEED req'ts, from the list below that are not actually required by the text of the edited section.
 
A.
Submit under provisions of Section 01 30 00 - Administrative Requirements
B.
Product Data: Manufacturer's data sheets on each product to be used, including:
1.
Preparation instructions and recommendations.
2.
Storage and handling requirements and recommendations.
3.
Installation methods.
C.
Finish Schedule: Submit finish schedule including color information, gloss and model number for each type and color of finish specified.
D.
Verification Samples: For each finish product specified, two samples, minimum size 6 inches (150 mm) square, representing actual product, color, and patterns.
1.5
QUALITY ASSURANCE
A.
Manufacturer Qualifications: All primary products specified in this section will be supplied by a single manufacturer with a minimum of ten years experience.
B.
Installer Qualifications: All products listed in this section are to be installed by a single installer with a minimum of five years demonstrated experience in installing finishes and coatings of the same type and scope as specified.
 
** NOTE TO SPECIFIER ** Include a mock-up if the project size and/or quality warrant taking such a precaution. The following is one example of how a mock-up on a large project might be specified. When deciding on the extent of the mock-up, consider all the major different types of work on the project.
 
C.
Mock-Up: Provide a mock-up for evaluation of surface preparation techniques and application workmanship.
1.
Finish areas designated by Architect.
2.
Do not proceed with remaining work until workmanship, color, and sheen are approved by Architect.
3.
Refinish mock-up area as required to produce acceptable work.
1.6
DELIVERY, STORAGE, AND HANDLING
A.
Store products in manufacturer's unopened packaging until ready for installation.
B.
Store and dispose of solvent-based materials, and materials used with solvent-based materials, in accordance with requirements of local authorities having jurisdiction.
C.
Take special safety precautions against hazards from toxic and flammable materials.
D.
Place paint and solvent contaminated cloths and materials, subject to spontaneous combustion, in containers and remove from job site each day.
E.
Keep open flame, electrical and static spark, and other ignition sources from flammable vapors and materials at all times.
1.7
PROJECT CONDITIONS
A.
Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's recommended limits.
B.
Post "WET PAINT" signs during application and curing of all coatings that may be accessed by other trades or the public.
C.
Post "NO SMOKING" signs during application and curing of solvent-based materials.
1.8
COORDINATION
A.
Coordinate Work with other operations and installation of finish materials to avoid damage to installed materials.
B.
Do not apply coating materials until moisture or dust-producing work or other appearance or performance impairing construction activities have been completed.
1.9
WARRANTY
A.
At project closeout, provide to Owner or Owners Representative an executed copy of the manufacturer's standard limited warranty against manufacturing defect, outlining its terms, conditions, and exclusions from coverage.
1.10
EXTRA MATERIALS
A.
At project closeout, provide to the owner or owners representative, two gallons (7.75L) of each finish coating material in sealed 1 gallon (3.875 L) containers, clearly marked with color and finish identification.
B.
Custom Colors: Provide a list of color formula and location for each finish specified.
PART 2 PRODUCTS
 
2.1
MANUFACTURERS
A.
Acceptable Manufacturer: Rodda Paint, which is located at: 6107 N. Marine Dr.; Portland, OR 97203; Toll Free Tel: 800-452-2315; Tel: 503-737-6033; Fax: 503-737-6004; Email: request info (jmcintyre@roddapaint.com); Web: www.roddapaint.com
1.
Architectural Representative: Jeff McIntyre: Phone: (206) 396-7074. E-mail: jmcintyre@roddapaint.com.
2.
Seattle Sales Office: 3838 Fourth Ave. South, Seattle, WA 98134. Phone: (206) 652-0445. Fax: (206) 652-0565.
 
** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with req'ts of Division 1 section on product options and substitutions.
 
B.
Substitutions: Not permitted.
C.
Requests for substitutions will be considered in accordance with provisions of 01 60 00 - Product Requirements.
2.2
PAINT MATERIALS - GENERAL
 
** NOTE TO SPECIFIER ** Typically retain this requirement.
 
A.
VOC : Provide materials to meet EPA 40 CFR Part 59 (AD-FRL-6149-71] RIN 2060 - National Volatile Organic Compound Emission Standards for Architectural Coatings, Final Rule, Federal Register / Vol. 63, No.176, September 11, 1998/Rules and Regulations.
 
** NOTE TO SPECIFIER ** Delete if LEED certification not required.
 
B.
LEED v3.0 NC, CI, or CS IEQ 4.2: Low-Emitting Materials - Paints and Coatings Compliance
1.
Paints and coatings used on the interior of the building (i.e., inside of the weatherproofing system and applied onsite) shall comply with the following criteria as applicable to the project :
a.
Architectural paints and coatings applied to interior walls and ceilings shall not exceed the volatile organic compound (VOC) content limits established in Green Seal Standard GS-11, Paints, 1st Edition, May 20, 1993.
1)
Flats: 50 g/L.
2)
Non-Flats: 150 g/L.
b.
Anti-corrosive and anti-rust paints applied to interior ferrous metal substrates shall not exceed the VOC content limit of 250 g/L established in Green Seal Standard GC-03, Anti-Corrosive Paints, 2nd Edition, January 7, 1997.
c.
Clear wood finishes, floor coatings, stains, primers, and shellacs applied to interior elements shall not exceed the VOC content limits established in South Coast Air Quality Management District (SCAQMD) Rule 1113, Architectural Coatings, rules in effect on January 1, 2004.
 
** NOTE TO SPECIFIER ** Delete paint systems not required. Paint complying with LEED req'ts are specified in Par. 2.3B.
 
2.3
EXTERIOR PAINT SYSTEMS
A.
Exterior Metal:
1.
Substrate: Ferrous Metal Structural Steel.
 
** NOTE TO SPECIFIER ** Select primer. Delete one of the next two paragraphs.
 
a.
Primer: Ferrous Metal Surfaces - Prime exposed metal areas with one coat 708225 Barrier III High Solids Alkyd Metal Primer. (solvent based)
b.
Primer: Ferrous Metal Surfaces - Prime exposed metal areas with one coat 508901 Metal Master Primer (Waterborne).
 
** NOTE TO SPECIFIER ** Select top coat based on finish. Delete eight of the next nine paragraphs.
 
c.
Finish: Gloss, Silicone Alkyd Gloss - Two coats Rodda 758801 Powerkote Silicone Alkyd Enamel.
d.
Finish: Semi-Gloss, Acrylic - Two coats Rodda 548901 Multi Master DTM Self Crosslinking Semi-Gloss Enamel.
e.
Finish: Satin, Acrylic - Two coats Rodda 528901 Multi Master DTM Self Crosslinking Satin Enamel.
f.
Finish: Gloss, Acrylic - Two coats Rodda 552001 Unique II Acrylic Enamel Gloss.
g.
Finish: Semi-Gloss Acrylic -Two coats Rodda 542001 Unique II Interior/ Exterior Semi-Gloss.
h.
Finish: Low Gloss Acrylic -Two coats Rodda 532001 Unique II Interior/ Exterior Low Gloss.
i.
Finish: Low-Gloss Acrylic -Deep Colors and Accent Striping: Two coats Rodda 53203x Color Base System Exterior.
j.
Finish: Gloss, Alkyd Gloss - Two coats Rodda 758101 All Purpose Equipment Enamel.
k.
Finish: Semi-Gloss, Alkyd Semi-Gloss - Two coats Rodda 745001 Porsalite Semi-Gloss.
2.
Substrate: Ferrous Metal: Windows, Frames, and Doors
 
** NOTE TO SPECIFIER ** Select primer. Delete one of the next two paragraphs.
 
a.
Primer: Ferrous Metal Surfaces - Prime exposed metal areas with one coat 708225 Barrier III High Solids Alkyd Metal Primer. (solvent based)
b.
Primer: Ferrous Metal Surfaces - Prime exposed metal areas with one coat 508901 Metal Master Primer (Waterborne).
 
** NOTE TO SPECIFIER ** Select top coat based on finish. Delete eight of the next nine paragraphs.
 
c.
Finish: Gloss, Silicone Alkyd Gloss - Two coats Rodda 758801 Powerkote Silicone Alkyd Enamel.
d.
Finish: Semi-Gloss, Acrylic - Two coats Rodda 548901 Multi Master DTM Self Crosslinking Semi-Gloss Enamel.
e.
Finish: Satin, Acrylic - Two coats Rodda 528901 Multi Master DTM Self Crosslinking Satin Enamel.
f.
Finish: Gloss, Acrylic - Two coats Rodda 552001 Unique II Acrylic Enamel Gloss.
g.
Finish: Semi-Gloss Acrylic -Two coats Rodda 542001 Unique II Interior/ Exterior Semi-Gloss.
h.
Finish: Low Gloss Acrylic -Two coats Rodda 532001 Unique II Interior/ Exterior Low Gloss.
i.
Finish: Low-Gloss Acrylic -Deep Colors and Accent Striping: Two coats Rodda 53203x Color Base System Exterior.
j.
Finish: Gloss, Alkyd Gloss - Two coats Rodda 758101 All Purpose Equipment Enamel.
k.
Finish: Semi-Gloss, Alkyd Semi-Gloss - Two coats Rodda 745001 Porsalite Semi-Gloss.
3.
Substrate: Aluminum.
 
** NOTE TO SPECIFIER ** Select primer. Delete one of the next two paragraphs.
 
a.
Primer: Aluminum Surfaces - Prime with one coat Carboline Rustbond FC Penetrating Sealer Primer at 1.0-2.0 mils DFT.
b.
Primer: Aluminum Surfaces - Prime exposed metal areas with one coat 508901 Metal Master Primer (Waterborne).
 
** NOTE TO SPECIFIER ** Select top coat based on finish. Delete eight of the next nine paragraphs.
 
c.
Finish: Gloss, Silicone Alkyd Gloss - Two coats Rodda 758801 Powerkote Silicone Alkyd Enamel.
d.
Finish: Semi-Gloss, Acrylic - Two coats Rodda 548901 Multi Master DTM Self Crosslinking Semi-Gloss Enamel.
e.
Finish: Satin, Acrylic - Two coats Rodda 528901 Multi Master DTM Self Crosslinking Satin Enamel.
f.
Finish: Gloss, Acrylic - Two coats Rodda 552001 Unique II Acrylic Enamel Gloss.
g.
Finish: Semi-Gloss Acrylic -Two coats Rodda 542001 Unique II Interior/ Exterior Semi-Gloss.
h.
Finish: Low Gloss Acrylic -Two coats Rodda 532001 Unique II Interior/ Exterior Low Gloss.
i.
Finish: Low-Gloss Acrylic -Deep Colors and Accent Striping: Two coats Rodda 53203x Color Base System Exterior.
j.
Finish: Gloss, Alkyd Gloss - Two coats Rodda 758101 All Purpose Equipment Enamel.
k.
Finish: Semi-Gloss, Alkyd Semi-Gloss - Two coats Rodda 745001 Porsalite Semi-Gloss.
4.
Substrate: Galvanized Metal.
 
** NOTE TO SPECIFIER ** Select primer. Delete one of the next two paragraphs.
 
a.
Primer: Galvanized Surfaces - Prime with one coat Carboline Galoseal WB High Performance Wash Primer at 0.5-1.0mils DFT.
b.
Primer: Galvanized Surfaces - Prime exposed metal areas with one coat 508901 Metal Master Primer (Waterborne).
 
** NOTE TO SPECIFIER ** Select top coat based on finish. Delete eight of the next nine paragraphs.
 
c.
Finish: Gloss, Silicone Alkyd Gloss - Two coats Rodda 75880x Powerkote Silicone Alkyd Enamel.
d.
Finish: Semi-Gloss, Acrylic - Two coats Rodda 548901 Multi Master DTM Self Crosslinking Semi-Gloss Enamel.
e.
Finish: Satin, Acrylic - Two coats Rodda 528901 Multi Master DTM Self Crosslinking Satin Enamel.
f.
Finish: Gloss, Acrylic - Two coats Rodda 552001 Unique II Acrylic Enamel Gloss.
g.
Finish: Semi-Gloss Acrylic -Two coats Rodda 542001 Unique II Interior/ Exterior Semi-Gloss.
h.
Finish: Low Gloss Acrylic -Two coats Rodda 532001 Unique II Interior/ Exterior Low Gloss.
i.
Finish: Low-Gloss Acrylic -Deep Colors and Accent Striping: Two coats Rodda 53203x Color Base System Exterior.
j.
Finish: Gloss, Alkyd Gloss - Two coats Rodda 758101 All Purpose Equipment Enamel.
k.
Finish: Semi-Gloss, Alkyd Semi-Gloss - Two coats Rodda 745001 Porsalite Semi-Gloss.
5.
Substrate: Ferrous Metal: Rusting Iron or Other Ferrous Metal.
a.
Primer: Rust Converter and Rusted Ferrous Metal Primer - Prime with one to two to coats (10 mils wet) 832331 Corroseal (waterborne). Allow 24 hours for cure.
 
** NOTE TO SPECIFIER ** Select top coat based on finish. Delete eight of the next nine paragraphs.
 
b.
Finish: Gloss, Silicone Alkyd Gloss - Two coats Rodda 75880x Powerkote Silicone Alkyd Enamel.
c.
Finish: Semi-Gloss, Acrylic - Two coats Rodda 548901 Multi Master DTM Self Crosslinking Semi-Gloss Enamel.
d.
Finish: Satin, Acrylic - Two coats Rodda 528901 Multi Master DTM Self Crosslinking Satin Enamel.
e.
Finish: Gloss, Acrylic - Two coats Rodda 552001 Unique II Acrylic Enamel Gloss.
f.
Finish: Semi-Gloss Acrylic -Two coats Rodda 542001 Unique II Interior/ Exterior Semi-Gloss.
g.
Finish: Low Gloss Acrylic -Two coats Rodda 532001 Unique II Interior/ Exterior Low Gloss.
h.
Finish: Low-Gloss Acrylic -Deep Colors and Accent Striping: Two coats Rodda 53203x Color Base System Exterior.
i.
Finish: Gloss, Alkyd Gloss - Two coats Rodda 758101 All Purpose Equipment Enamel.
j.
Finish: Semi-Gloss, Alkyd Semi-Gloss - Two coats Rodda 745001 Porsalite Semi-Gloss.
6.
Substrate: Copper Piping.
 
** NOTE TO SPECIFIER ** Select primer. Delete one of the next two paragraphs.
 
a.
Primer: Non-Ferrous Surfaces - Prime with one coat Carboline Galoseal WB Wash Primer applied at 0.5-1.0 mils DFT.
b.
Primer: Non-Ferrous Surfaces - Prime exposed metal areas with one coat 508901 Metal Master Primer (Waterborne).
 
** NOTE TO SPECIFIER ** Select top coat based on finish. Delete eight of the next nine paragraphs.
 
c.
Finish: Gloss, Silicone Alkyd Gloss - Two coats Rodda 758801 Powerkote Silicone Alkyd Enamel.
d.
Finish: Semi-Gloss, Acrylic - Two coats Rodda 548901 Multi Master DTM Self Crosslinking Semi-Gloss Enamel.
e.
Finish: Satin, Acrylic - Two coats Rodda 528901 Multi Master DTM Self Crosslinking Satin Enamel.
f.
Finish: Gloss, Acrylic - Two coats Rodda 552001 Unique II Acrylic Enamel Gloss.
g.
Finish: Semi-Gloss Acrylic -Two coats Rodda 542001 Unique II Interior/ Exterior Semi-Gloss.
h.
Finish: Low Gloss Acrylic -Two coats Rodda 532001 Unique II Interior/ Exterior Low Gloss.
i.
Finish: Low-Gloss Acrylic -Deep Colors and Accent Striping: Two coats Rodda 53203x Color Base System Exterior.
j.
Finish: Gloss, Alkyd Gloss - Two coats Rodda 758101 All Purpose Equipment Enamel.
k.
Finish: Semi-Gloss, Alkyd Semi-Gloss - Two coats Rodda 745001 Porsalite Semi-Gloss.
B.
Exterior Drywall:
1.
Substrate: Drywall, Unfinished (General Areas).
a.
Primer: Drywall - Prime with one coat Rodda 501601 First Coat Acrylic Latex Primer.
 
** NOTE TO SPECIFIER ** Select top coat based on finish. Delete eight of the next nine paragraphs.
 
b.
Finish: Satin -Two coats 522601 Ultimate II Exterior Acrylic (35 year Commercial Warranty) Satin.
c.
Finish: Flat -Two coats 512601 Ultimate II Exterior Acrylic (35 year Commercial Warranty) Flat.
d.
Finish: Semi-Gloss - Two coats Rodda 542001 Unique II Interior/ Exterior Semi-Gloss.
e.
Finish: Low-Gloss - Two coats Rodda 532001 Unique II Interior/ Exterior Low-Gloss.
f.
Finish: Deep Colors and Accent Striping, 53203x Low Gloss - Two coats Rodda Color Base System Exterior.
g.
Finish: Satin - Two coats Rodda 521101 CoverCoat AC909 Exterior Acrylic Latex Satin.
h.
Finish: Velvet Flat - Two coats Rodda 511101 CoverCoat AC911 Exterior Acrylic Latex Velvet Flat.
i.
Finish: Flat - Two coats Rodda 511901 CoverCoat AC910 Exterior Acrylic Latex Flat.
j.
Finish: Flat - Two coats Rodda 512301 pHlex-tite acrylic elastomeric (self-priming) Primer / Flat Finish.
C.
Exterior Vinyl Siding and Shutters:
1.
Substrate: Vinyl Siding and Shutters.
a.
Primer: Prime with one coat Rodda 501601 First Coat Acrylic Latex Primer.
 
** NOTE TO SPECIFIER ** Select top coat based on finish. Delete six of the next seven paragraphs.
 
b.
Finish: Satin -Two coats 522601 Ultimate II Exterior Acrylic (35 year Commercial Warranty) Satin.
c.
Finish: Flat -Two coats 512601 Ultimate II Exterior Acrylic (35 year Commercial Warranty) Flat.
d.
Finish: Semi-Gloss, Acrylic - Two coats Rodda 548901 Multi Master DTM Self Crosslinking Semi-Gloss Enamel.
e.
Finish: Satin, Acrylic - Two coats Rodda 528901 Multi Master DTM Self Crosslinking Satin Enamel.
f.
Finish: Semi-Gloss - Two coats Rodda 542001 Unique II Interior/ Exterior Semi-Gloss.
g.
Finish: Low-Gloss - Two coats Rodda 532001 Unique II Interior/ Exterior Low-Gloss.
h.
Finish: Deep Colors and Accent Striping, 53203x Low Gloss - Two coats Rodda Color Base System Exterior.
i.
Finish: Satin - Two coats Rodda 521101 CoverCoat AC909 Exterior Acrylic Latex Satin.
j.
Finish: Velvet Flat - Two coats Rodda 511101 CoverCoat AC911 Exterior Acrylic Latex Velvet Flat.
k.
Finish: Flat - Two coats Rodda 511901 CoverCoat AC910 Exterior Acrylic Latex Flat.
D.
Exterior Fiberglass Doors:
1.
Substrate: Fiberglass Doors.
a.
Primer: Prime with one coat Rodda 501601 First Coat Acrylic Latex Primer.
 
** NOTE TO SPECIFIER ** Select top coat based on finish. Delete four of the next five paragraphs.
 
b.
Finish: Semi Gloss, Acrylic - Two coats Rodda 548901 Multi Master DTM Self Crosslinking Semi Gloss Enamel.
c.
Finish: Satin, Acrylic - Two coats Rodda 528901 Multi Master DTM Self Crosslinking Satin Enamel.
d.
Finish: Semi-Gloss Acrylic -Two coats Rodda 542001 Unique II Interior/ Exterior Semi-Gloss.
e.
Finish: Low-Gloss - Two coats Rodda 532001 Unique II Interior/ Exterior Low-Gloss.
f.
Finish: Low-Gloss Acrylic -Deep Colors and Accent Striping: Two coats Rodda 53203x Color Base System Exterior.
E.
Exterior Masonry, Concrete and Stucco:
1.
Substrate: Masonry and Brick (non-porous).
 
** NOTE TO SPECIFIER ** Select primer. Delete one of the next two paragraphs.
 
a.
Primer: One coat 501801 Surfbond II Acrylic Masonry Conditioner Primer.
b.
Primer Finish: Rodda 512301 pHlex-tite acrylic elastomeric Primer /Finish.
c.
Primer: Prime with one coat Rodda 501601 First Coat Acrylic Latex Primer.
 
** NOTE TO SPECIFIER ** Select top coat based on finish. Delete nine of the next ten paragraphs.
 
d.
Finish: Satin -Two coats 522601 Ultimate II Exterior Acrylic (35 year Commercial Warranty) Satin.
e.
Finish: Flat -Two coats 512601 Ultimate II Exterior Acrylic (35 year Commercial Warranty) Flat.
f.
Finish: Flat - Two coats Rodda 512301 pHlex-tite Acrylic Elastomeric Flat Finish at 7.5 dry mils per coat.
g.
Elastomeric Finish: Smooth Flat - Two coats Rodda 511301 Super Roflex Elastomeric Coating at 7.5 dry mils per coat. Backroll to eliminate pin holes.
h.
Finish: Semi-Gloss - Two coats Rodda 542001 Unique II Interior/ Exterior Semi-Gloss.
i.
Finish: Deep Colors and Accent Striping, - Two coats Rodda 53203x Low Gloss Color Base System Exterior.
j.
Finish: Low-Gloss - Two coats Rodda 532001 Unique II Exterior Acrylic Latex Low Gloss.
k.
Finish: Satin - Two coats Rodda 521101 CoverCoat AC909 Exterior Acrylic Latex Satin.
l.
Finish: Velvet Flat - Two coats Rodda 511101 CoverCoat AC911 Exterior Acrylic Latex Velvet Flat.
m.
Finish: Flat - Two coats Rodda 511901 CoverCoat AC910 Exterior Acrylic Latex Flat.
2.
Substrate: Concrete Masonry Units (Porous).
a.
Block Filler: One coat Rodda 501901 Sprayable Smooth Block Filler. Backroll to fill voids.
 
** NOTE TO SPECIFIER ** Select top coat based on finish. Delete nine of the next ten paragraphs.
 
b.
Finish: Flat - Two coats Rodda 512301 pHlex-tite Acrylic Elastomeric Flat Finish at 7.5 dry mils per coat.
c.
Elastomeric Finish: Smooth Flat - Two coats Rodda 511301 Super Roflex Elastomeric Coating at 7.5 dry mils per coat. Backroll to eliminate pin holes.
d.
Finish: Satin -Two coats 522601 Ultimate II Exterior Acrylic (35 year Commercial Warranty) Satin.
e.
Finish: Flat -Two coats 512601 Ultimate II Exterior Acrylic (35 year Commercial Warranty) Flat.
f.
Finish: Semi-Gloss - Two coats Rodda 542001 Unique II Interior/ Exterior Semi-Gloss.
g.
Finish: Deep Colors and Accent Striping, - Two coats Rodda 53203x Low Gloss Color Base System Exterior.
h.
Finish: Low-Gloss - Two coats Rodda 532001 Unique II Exterior Acrylic Latex Low Gloss.
i.
Finish: Satin - Two coats Rodda 521101 CoverCoat AC909 Exterior Acrylic Latex Satin.
j.
Finish: Velvet Flat - Two coats Rodda 511101 CoverCoat AC911 Exterior Acrylic Latex Velvet Flat.
k.
Finish: Flat - Two coats Rodda 511901 CoverCoat AC910 Exterior Acrylic Latex Flat.
3.
Substrate: Cured Stucco.
 
** NOTE TO SPECIFIER ** Select primer. Delete two of the next three paragraphs.
 
a.
Primer: One coat 501801 Surfbond II Acrylic Masonry Conditioner Primer.
b.
Primer Finish: Rodda 512301 pHlex-tite acrylic elastomeric Primer /Finish.
c.
Primer: Prime with one coat Rodda 501601 First Coat Acrylic Latex Primer.
 
** NOTE TO SPECIFIER ** Select top coat based on finish. Delete five of the next six paragraphs.
 
d.
Finish: Flat - Two coats Rodda 512301 pHlex-tite Acrylic Elastomeric Flat Finish at 7.5 dry mils per coat.
e.
Elastomeric Finish: Smooth Flat - Two coats Rodda 511301 Super Roflex Elastomeric Coating at 7.5 dry mils per coat. Backroll to eliminate pin holes.
f.
Finish: Satin -Two coats 522601 Ultimate II Exterior Acrylic (35 year Commercial Warranty) Satin.
g.
Finish: Flat -Two coats 512601 Ultimate II Exterior Acrylic (35 year Commercial Warranty) Flat.
h.
Finish: Semi-Gloss - Two coats Rodda 542001 Unique II Interior/ Exterior Semi-Gloss.
i.
Finish: Deep Colors and Accent Striping, - Two coats Rodda 53203x Low Gloss Color Base System Exterior.
j.
Finish: Low-Gloss - Two coats Rodda 532001 Unique II Exterior Acrylic Latex Low Gloss.
k.
Finish: Satin - Two coats Rodda 521101 CoverCoat AC909 Exterior Acrylic Latex Satin.
l.
Finish: Velvet Flat - Two coats Rodda 511101 CoverCoat AC911 Exterior Acrylic Latex Velvet Flat.
m.
Finish: Flat - Two coats Rodda 511901 CoverCoat AC910 Exterior Acrylic Latex Flat.
4.
Substrate: Cast Concrete.
 
** NOTE TO SPECIFIER ** Select primer. Delete two of the next three paragraphs.
 
a.
Primer: One coat 501801 Surfbond II Acrylic Masonry Conditioner Primer.
b.
Primer Finish: Rodda 512301 pHlex-tite acrylic elastomeric Primer /Finish.
c.
Primer: Prime with one coat Rodda 501601 First Coat Acrylic Latex Primer.
 
** NOTE TO SPECIFIER ** Select top coat based on finish. Delete nine of the next ten paragraphs.
 
d.
Finish: Satin -Two coats 522601 Ultimate II Exterior Acrylic (35 year Commercial Warranty) Satin.
e.
Finish: Flat -Two coats 512601 Ultimate II Exterior Acrylic (35 year Commercial Warranty) Flat.
f.
Finish: Flat - Two coats Rodda 512301 pHlex-tite Acrylic Elastomeric Flat Finish at 7.5 dry mils per coat.
g.
Elastomeric Finish: Smooth Flat - Two coats Rodda 511301 Super Roflex Elastomeric Coating at 7.5 dry mils per coat. Backroll to eliminate pin holes.
h.
Finish: Semi-Gloss - Two coats Rodda 542001 Unique II Interior/ Exterior Semi-Gloss.
i.
Finish: Deep Colors and Accent Striping, - Two coats Rodda 53203x Low Gloss Color Base System Exterior.
j.
Finish: Low-Gloss - Two coats Rodda 532001 Unique II Exterior Acrylic Latex Low Gloss.
k.
Finish: Satin - Two coats Rodda 521101 CoverCoat AC909 Exterior Acrylic Latex Satin.
l.
Finish: Velvet Flat - Two coats Rodda 511101 CoverCoat AC911 Exterior Acrylic Latex Velvet Flat.
m.
Finish: Flat - Two coats Rodda 511901 CoverCoat AC910 Exterior Acrylic Latex Flat.
5.
Substrate: Hot Concrete (high pH):
 
** NOTE TO SPECIFIER ** Select primer. Delete one of the next two paragraphs.
 
a.
Primer: One coat 501801 Surfbond II Acrylic Masonry Conditioner Primer.
b.
Primer Finish: Rodda 512301 pHlex-tite acrylic elastomeric Primer / Flat Finish.
c.
Primer: Prime with one coat Rodda 501601 First Coat Acrylic Latex Primer.
 
** NOTE TO SPECIFIER ** Select top coat based on finish. Delete nine of the next ten paragraphs.
 
d.
Finish: Satin -Two coats 522601 Ultimate II Exterior Acrylic (35 year Commercial Warranty) Satin.
e.
Finish: Flat -Two coats 512601 Ultimate II Exterior Acrylic (35 year Commercial Warranty) Flat.
f.
Finish: Flat - Two coats Rodda 512301 pHlex-tite Acrylic Elastomeric Flat Finish at 7.5 dry mils per coat.
g.
Elastomeric Finish: Smooth Flat - Two coats Rodda 511301 Super Roflex Elastomeric Coating at 7.5 dry mils per coat. Backroll to eliminate pin holes.
h.
Finish: Semi-Gloss - Two coats Rodda 542001 Unique II Interior/ Exterior Semi-Gloss.
i.
Finish: Deep Colors and Accent Striping, - Two coats Rodda 53203x Low Gloss Color Base System Exterior.
j.
Finish: Low-Gloss - Two coats Rodda 532001 Unique II Exterior Acrylic Latex Low Gloss.
k.
Finish: Satin - Two coats Rodda 521101 CoverCoat AC909 Exterior Acrylic Latex Satin.
l.
Finish: Velvet Flat - Two coats Rodda 511101 CoverCoat AC911 Exterior Acrylic Latex Velvet Flat.
m.
Finish: Flat - Two coats Rodda 511901 CoverCoat AC910 Exterior Acrylic Latex Flat.
F.
Exterior Hardiboard and Hardiplank:
1.
Substrate: Fiber Cement Board:
a.
Primer Finish: Rodda 512301 pHlex-tite acrylic elastomeric Primer /Finish.
b.
Primer: Prime with one coat Rodda 501601 First Coat Acrylic Latex Primer.
 
** NOTE TO SPECIFIER ** Select top coat based on finish. Delete seven of the next eight paragraphs.
 
c.
Finish: Satin -Two coats 522601 Ultimate II Exterior Acrylic (35 year Commercial Warranty) Satin.
d.
Finish: Flat -Two coats 512601 Ultimate II Exterior Acrylic (35 year Commercial Warranty) Flat.
e.
Finish: Semi-Gloss - Two coats Rodda 542001 Unique II Interior/ Exterior Semi-Gloss.
f.
Finish: Deep Colors and Accent Striping, - Two coats Rodda 53203x Low Gloss Color Base System Exterior.
g.
Finish: Low-Gloss - Two coats Rodda 532001 Unique II Exterior Acrylic Latex Low Gloss.
h.
Finish: Satin - Two coats Rodda 521101 CoverCoat AC909 Exterior Acrylic Latex Satin.
i.
Finish: Velvet Flat - Two coats Rodda 511101 CoverCoat AC911 Exterior Acrylic Latex Velvet Flat.
j.
Finish: Flat - Two coats Rodda 511901 CoverCoat AC910 Exterior Acrylic Latex Flat.
G.
Exterior Wood:
1.
Substrate: Wood (Opaque Paint Finish on Wood Vertical Siding).
 
** NOTE TO SPECIFIER ** Select primer. Delete one of the next two paragraphs.
 
a.
Primer: One coat Rodda 501601 First Coat Acrylic Latex Primer.
b.
Primer: One coat Rodda Cloverdale 15130 WeatherOne Int. / Ext. Alkyd Stain Blocking Primer.(Solvent based)
c.
Primer: One coat Rodda 701501 Control Wood Alkyd Primer.(Solvent based slow dry)
 
** NOTE TO SPECIFIER ** Select top coat based on finish. Delete seven of the next eight paragraphs.
 
d.
Finish: Satin -Two coats 522601 Ultimate II Exterior Acrylic (35 year Commercial Warranty) Satin.
e.
Finish: Flat -Two coats 512601 Ultimate II Exterior Acrylic (35 year Commercial Warranty) Flat.
f.
Finish: Semi-Gloss - Two coats Rodda 542001 Unique II Interior/ Exterior Semi-Gloss.
g.
Finish: Deep Colors and Accent Striping, - Two coats Rodda 53203x Low Gloss Color Base System Exterior.
h.
Finish: Low-Gloss - Two coats Rodda 532001 Unique II Exterior Acrylic Latex Low Gloss.
i.
Finish: Satin - Two coats Rodda 521101 CoverCoat AC909 Exterior Acrylic Latex Satin.
j.
Finish: Velvet Flat - Two coats Rodda 511101 CoverCoat AC911 Exterior Acrylic Latex Velvet Flat.
k.
Finish: Flat - Two coats Rodda 511901 CoverCoat AC910 Exterior Acrylic Latex Flat.
2.
Substrate: Wood (Opaque Paint Finish on Wood Trim, Frames and Molding).
 
** NOTE TO SPECIFIER ** Select primer. Delete one of the next two paragraphs.
 
a.
Primer: One coat Rodda 501601 First Coat Acrylic Latex Primer.
b.
Primer: One coat Rodda Cloverdale 15130 WeatherOne Int. / Ext. Alkyd Stain Blocking Primer.(Solvent based)
c.
Primer: One coat Rodda 701501 Control Wood Alkyd Primer.(Solvent based slow dry)
 
** NOTE TO SPECIFIER ** Select top coat based on finish. Delete seven of the next eight paragraphs.
 
d.
Finish: Satin -Two coats 522601 Ultimate II Exterior Acrylic (35 year Commercial Warranty) Satin.
e.
Finish: Flat -Two coats 512601 Ultimate II Exterior Acrylic (35 year Commercial Warranty) Flat.
f.
Finish: Semi-Gloss, Acrylic - Two coats Rodda 548901 Multi Master DTM Self Crosslinking Semi-Gloss Enamel.
g.
Finish: Satin, Acrylic - Two coats Rodda 528901 Multi Master DTM Self Crosslinking Satin Enamel.
h.
Finish: Gloss - Two coats Rodda 552001 Unique II Interior/ Exterior Gloss.
i.
Finish: Semi-Gloss - Two coats Rodda 542001 Unique II Interior/ Exterior Semi-Gloss.
j.
Finish: Deep Colors and Accent Striping, - Two coats Rodda 53203x Low Gloss Color Base System Exterior.
k.
Finish: Low-Gloss - Two coats Rodda 532001 Unique II Exterior Acrylic Latex Low Gloss.
l.
Finish: Satin - Two coats Rodda 521101 CoverCoat AC909 Exterior Acrylic Latex Satin.
m.
Finish: Velvet Flat - Two coats Rodda 511101 CoverCoat AC911 Exterior Acrylic Latex Velvet Flat.
n.
Finish: Flat - Two coats Rodda 511901 CoverCoat AC910 Exterior Acrylic Latex Flat.
3.
Substrate: Stain Finish on Vertical Wood.
a.
Finish Opaque, Water Based: Cloverdale 724-Series (20 year) SharkSkin Solid Deck and Siding Stain.
b.
Finish Opaque, Water Based: Cloverdale 723-Series (15 year) WeatherOne Solid Hide Acrylic Stain.
c.
Finish Opaque, Alkyd: Rodda 714411 Rural Manor II Solid Oil Stain.
d.
Semi-Transparent, Water Based: Cloverdale WeatherOne 06680 Semi-Transparent 100% Acrylic Stain.
e.
Semi-Transparent, Alkyd: Rodda 714103 Rural Manor Semi-Transparent Stain.
4.
Substrate: Wood Decking and Porch Floors (Stain Finish):
a.
Finish Opaque, Water Based: Cloverdale 724-Series (6 year) SharkSkin Solid Deck and Siding Stain.
b.
Semi-Transparent, Water Based: Cloverdale WeatherOne 06680 Semi-Transparent 100% Acrylic Stain.
c.
Finish Semi-Transparent: FloodPro CWF UV5 Oil Finish.
H.
Exterior Pavement Traffic And Zone Marking Paint
1.
Substrate: Pavement Traffic and Zone Marking Paint:
a.
Driveline Acrylic Emulsion Striping Paint - White 7341.
b.
Driveline Acrylic Emulsion Striping Paint - Yellow 7342.
2.4
INTERIOR PAINT SYSTEMS
 
** NOTE TO SPECIFIER ** Delete systems and products not required.
 
A.
Interior Metal:
1.
Substrate: Ferrous Metal - Structural Steel.
 
** NOTE TO SPECIFIER ** Select primer. Delete one of the next two paragraphs.
 
a.
Primer: Ferrous Metal Surfaces - Prime exposed metal areas with one coat 708225 Barrier III High Solids Alkyd Metal Primer.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
b.
Primer: Ferrous Metal Surfaces - Prime exposed metal areas with one coat 508901 Metal Master Primer (Waterborne).
 
** NOTE TO SPECIFIER ** Select the finish(es) required from the following paragraphs and delete those not required. The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
c.
Wet Environment Finish: Water based Epoxy, Gloss - Two coats Rodda's Cloverdale Ecologic WB 70503 2 Component Epoxy.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
d.
Wet Environment Finish: Water based Epoxy, Semi-Gloss - Two coats Rodda's Cloverdale Ecologic WB 70504 2 Component Epoxy.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
e.
Wet Environment Finish: Water based Epoxy, Satin - Two coats Rodda's Cloverdale Ecologic WB 70505 2 Component Epoxy.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
f.
Finish: Semi-Gloss, Acrylic - Two coats Rodda 548901 Multi Master DTM Self Crosslinking Semi-Gloss Enamel.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
g.
Finish: Satin, Acrylic - Two coats Rodda 528901 Multi Master DTM Self Crosslinking Satin Enamel.
h.
Finish: Semi-Gloss, Acrylic - Two coats Rodda 533589 WoodMaster Premium Semi-Gloss.
i.
Finish: Low-Gloss, Acrylic - Two coats Rodda 533590 WoodMaster Premium Low-Gloss.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
j.
Finish: Semi-Gloss- Two coats Cloverdale 031 Series Renaissance Hybrid Waterborne Alkyd Enamel Semi-Gloss.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
k.
Finish: Satin - Two coats Cloverdale 034 Series Renaissance Hybrid Waterborne Alkyd Enamel Melamine.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
l.
Finish: Gloss, Acrylic - Two coats Rodda 552001 Unique II Gloss.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
m.
Finish: Semi-Gloss, Acrylic - Two coats Rodda 542001 Unique II Semi-Gloss.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
n.
Finish: Lo Gloss Acrylic - Two coats Rodda 532001 Unique II Low Gloss.
o.
Finish: Side Sheen Flat Acrylic - Two coats Rodda 512001 Unique II Scrubbable Flat.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
p.
Zero VOC Finish Semi-Gloss: Two coats Rodda 543501 Horizon Semi-Gloss Interior Latex.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
q.
Zero VOC Finish Satin: Two coats Rodda 523501 Horizon Satin Interior Latex.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
r.
Zero VOC Finish Flat: Two coats Rodda 513501 Horizon Flat Interior Latex.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
s.
Ultra Low VOC Commercial Finish: Semi-Gloss - Two coats Rodda 543601 Master Painter Ultra Low Semi-Gloss Interior Latex.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
t.
Finish: Eggshell - Two coats Rodda 533001 Lasyn Interior Latex Eggshell Enamel.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
u.
Ultra Low VOC Commercial Finish: Satin - Two coats Rodda 523601 Master Painter Ultra Low VOC Satin Interior Latex.
v.
Finish: Velvet Flat - Two coats Rodda 513001 Lasyn Interior Velvet Flat Latex.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
w.
Ultra Low VOC Commercial Finish: Flat - Two coats Rodda 513601 Master Painter Ultra Low VOC Interior Latex Flat.
2.
Substrate: Ferrous Metal - Windows, Frames and Doors.
 
** NOTE TO SPECIFIER ** Select primer. Delete two of the next three paragraphs.
 
a.
Primer: Ferrous Metal Surfaces - Prime exposed metal areas with one coat 708225 Barrier III High Solids Alkyd Metal Primer (Solvent Base).
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
b.
Primer: Ferrous Metal Surfaces - Prime exposed metal areas with one coat 508998 Metal Master Primer (Waterborne).
 
** NOTE TO SPECIFIER ** Select the finish(es) required from the following paragraphs and delete those not required. The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
c.
Wet Environment Finish: Water based Epoxy, Gloss - Two coats Rodda's Cloverdale Ecologic WB 70503 2 Component Epoxy.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
d.
Wet Environment Finish: Water based Epoxy, Semi-Gloss - Two coats Rodda's Cloverdale Ecologic WB 70504 2 Component Epoxy.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
e.
Wet Environment Finish: Water based Epoxy, Satin - Two coats Rodda's Cloverdale Ecologic WB 70505 2 Component Epoxy.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
f.
Finish: Semi-Gloss, Acrylic - Two coats Rodda 548901 Multi Master DTM Self Crosslinking Semi-Gloss Enamel.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
g.
Finish: Satin, Acrylic - Two coats Rodda 528901 Multi Master DTM Self Crosslinking Satin Enamel.
h.
Finish: Semi-Gloss, Acrylic - Two coats Rodda 533589 WoodMaster Premium Semi-Gloss.
i.
Finish: Low-Gloss, Acrylic - Two coats Rodda 533590 WoodMaster Premium Low-Gloss.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
j.
Finish: Semi-Gloss- Two coats Cloverdale 031 Series Renaissance Hybrid Waterborne Alkyd Enamel Semi-Gloss.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
k.
Finish: Satin - Two coats Cloverdale 034 Series Renaissance Hybrid Waterborne Alkyd Enamel Melamine.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
l.
Finish: Gloss, Acrylic - Two coats Rodda 552001 Unique II Gloss.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
m.
Finish: Semi-Gloss, Acrylic - Two coats Rodda 542001 Unique II Semi-Gloss.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
n.
Finish: Lo Gloss Acrylic - Two coats Rodda 532001 Unique II Low Gloss.
o.
Finish: Side Sheen Flat Acrylic - Two coats Rodda 512001 Unique II Scrubbable Flat.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
p.
Zero VOC Finish Semi-Gloss: Two coats Rodda 543501 Horizon Semi-Gloss Interior Latex.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
q.
Zero VOC Finish Satin: Two coats Rodda 523501 Horizon Satin Interior Latex.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
r.
Zero VOC Finish Flat: Two coats Rodda 513501 Horizon Flat Interior Latex.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
s.
Ultra Low VOC Commercial Finish: Semi-Gloss - Two coats Rodda 543601 Master Painter Ultra Low Semi-Gloss Interior Latex.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
t.
Finish: Eggshell - Two coats Rodda 533001 Lasyn Interior Latex Eggshell Enamel.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
u.
Ultra Low VOC Commercial Finish: Satin - Two coats Rodda 523601 Master Painter Ultra Low VOC Satin Interior Latex.
v.
Finish: Velvet Flat - Two coats Rodda 513001 Lasyn Interior Velvet Flat Latex.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
w.
Ultra Low VOC Commercial Finish: Flat - Two coats Rodda 513601 Master Painter Ultra Low VOC Interior Latex Flat.
3.
Substrate: Aluminum.
 
** NOTE TO SPECIFIER ** Select primer. Delete one of the next two paragraphs. The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
a.
Primer: Prime with one coat Carboline Galoseal WB Primer at 0.5-1.0 mils DFT (Waterborne).
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
b.
Primer: Prime with one coat 508901 Metal Master Acrylic Primer (Waterborne).
 
** NOTE TO SPECIFIER ** Select the finish(es) required from the following paragraphs and delete those not required. The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
c.
Wet Environment Finish: Water based Epoxy, Gloss - Two coats Rodda's Cloverdale Ecologic WB 70503 2 Component Epoxy.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
d.
Wet Environment Finish: Water based Epoxy, Semi-Gloss - Two coats Rodda's Cloverdale Ecologic WB 70504 2 Component Epoxy.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
e.
Wet Environment Finish: Water based Epoxy, Satin - Two coats Rodda's Cloverdale Ecologic WB 70505 2 Component Epoxy.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
f.
Finish: Semi Gloss, Acrylic - Two coats Rodda 548901 Multi Master DTM Self Crosslinking Semi Gloss Enamel.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
g.
Finish: Satin, Acrylic - Two coats Rodda 528901 Multi Master DTM Self Crosslinking Satin Enamel.
h.
Finish: Semi-Gloss, Acrylic - Two coats Rodda 533589 WoodMaster Premium Semi-Gloss.
i.
Finish: Low-Gloss, Acrylic - Two coats Rodda 533590 WoodMaster Premium Low-Gloss.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
j.
Finish: Semi-Gloss- Two coats Cloverdale 031 Series Renaissance Hybrid Waterborne Alkyd Enamel Semi-Gloss.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
k.
Finish: Satin - Two coats Cloverdale 034 Series Renaissance Hybrid Waterborne Alkyd Enamel Melamine.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
l.
Finish: Gloss, Acrylic - Two coats Rodda 552001 Unique II Gloss.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
m.
Finish: Semi Gloss, Acrylic - Two coats Rodda 542001 Unique II Semi-Gloss.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
n.
Finish: Lo Gloss Acrylic - Two coats Rodda 532001 Unique II Low Gloss.
o.
Finish: Side Sheen Flat Acrylic - Two coats Rodda 512001 Unique II Scrubbable Flat.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
p.
Zero VOC Finish Semi-Gloss: Two coats Rodda 543501 Horizon Semi-Gloss Interior Latex.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
q.
Zero VOC Finish Satin: Two coats Rodda 523501 Horizon Satin Interior Latex.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
r.
Zero VOC Finish Flat: Two coats Rodda 513501 Horizon Flat Interior Latex.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
s.
Ultra Low VOC Commercial Finish: Semi-Gloss - Two coats Rodda 543601 Master Painter Ultra Low Semi-Gloss Interior Latex.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
t.
Finish: Eggshell - Two coats Rodda 533001 Lasyn Interior Latex Eggshell Enamel.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
u.
Ultra Low VOC Commercial Finish: Satin - Two coats Rodda 523601 Master Painter Ultra Low VOC Satin Interior Latex.
v.
Finish: Velvet Flat - Two coats Rodda 513001 Lasyn Interior Velvet Flat Latex.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
w.
Ultra Low VOC Commercial Finish: Flat - Two coats Rodda 513601 Master Painter Ultra Low VOC Interior Latex Flat.
4.
Substrate: Galvanized Metal.
 
** NOTE TO SPECIFIER ** Select primer. Delete one of the next two paragraphs.
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
a.
Primer: Prime with one coat Carboline Galoseal WB High Performance Wash Primer at 0.5-1.0 mils DFT (Waterborne).
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
b.
Primer: Prime with one coat 508901 Metal Master Acrylic Primer (Waterborne).
 
** NOTE TO SPECIFIER ** Select the finish(es) required from the following paragraphs and delete those not required. The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
c.
Wet Environment Finish: Water based Epoxy, Gloss - Two coats Rodda's Cloverdale Ecologic WB 70503 2 Component Epoxy.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
d.
Wet Environment Finish: Water based Epoxy, Semi-Gloss - Two coats Rodda's Cloverdale Ecologic WB 70504 2 Component Epoxy.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
e.
Wet Environment Finish: Water based Epoxy, Satin - Two coats Rodda's Cloverdale Ecologic WB 70505 2 Component Epoxy.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
f.
Finish: Semi Gloss, Acrylic - Two coats Rodda 548901 Multi Master DTM Self Crosslinking Semi Gloss Enamel.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
g.
Finish: Satin, Acrylic - Two coats Rodda 528901 Multi Master DTM Self Crosslinking Satin Enamel.
h.
Finish: Semi-Gloss, Acrylic - Two coats Rodda 533589 WoodMaster Premium Semi-Gloss.
i.
Finish: Low-Gloss, Acrylic - Two coats Rodda 533590 WoodMaster Premium Low-Gloss.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
j.
Finish: Semi-Gloss- Two coats Cloverdale 031 Series Renaissance Hybrid Waterborne Alkyd Enamel Semi-Gloss.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
k.
Finish: Satin - Two coats Cloverdale 034 Series Renaissance Hybrid Waterborne Alkyd Enamel Melamine.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
l.
Finish: Gloss, Acrylic - Two coats Rodda 552001 Unique II Gloss.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
m.
Finish: Semi Gloss, Acrylic - Two coats Rodda 542001 Unique II Semi-Gloss.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
n.
Finish: Lo Gloss Acrylic - Two coats Rodda 532001 Unique II Low Gloss.
o.
Finish: Side Sheen Flat Acrylic - Two coats Rodda 512001 Unique II Scrubbable Flat.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
p.
Zero VOC Finish Semi-Gloss: Two coats Rodda 543501 Horizon Semi-Gloss Interior Latex.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
q.
Zero VOC Finish Satin: Two coats Rodda 523501 Horizon Satin Interior Latex.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
r.
Zero VOC Finish Flat: Two coats Rodda 513501 Horizon Flat Interior Latex.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
s.
Ultra Low VOC Commercial Finish: Semi-Gloss - Two coats Rodda 543601 Master Painter Ultra Low Semi-Gloss Interior Latex.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
t.
Finish: Eggshell - Two coats Rodda 533001 Lasyn Interior Latex Eggshell Enamel.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
u.
Ultra Low VOC Commercial Finish: Satin - Two coats Rodda 523601 Master Painter Ultra Low VOC Satin Interior Latex.
v.
Finish: Velvet Flat - Two coats Rodda 513001 Lasyn Interior Velvet Flat Latex.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
w.
Ultra Low VOC Commercial Finish: Flat - Two coats Rodda 513601 Master Painter Ultra Low VOC Interior Latex Flat.
5.
Substrate: Ferrous Metal - Rusting Iron or other ferrous metal.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
a.
Primer: Rust Converter and Rusted Ferrous Metal Primer - Prime with one to two coats (10 mils wet) 832331 Corrroseal (waterborne).
 
** NOTE TO SPECIFIER ** Select the finish(es) required from the following paragraphs and delete those not required. The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
b.
Wet Environment Finish: Water based Epoxy, Gloss - Two coats Rodda's Cloverdale Ecologic WB 70503 2 Component Epoxy.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
c.
Wet Environment Finish: Water based Epoxy, Semi-Gloss - Two coats Rodda's Cloverdale Ecologic WB 70504 2 Component Epoxy.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
d.
Wet Environment Finish: Water based Epoxy, Satin - Two coats Rodda's Cloverdale Ecologic WB 70505 2 Component Epoxy.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
e.
Finish: Semi Gloss, Acrylic - Two coats Rodda 548901 Multi Master DTM Self Crosslinking Semi Gloss Enamel.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
f.
Finish: Satin, Acrylic - Two coats Rodda 528901 Multi Master DTM Self Crosslinking Satin Enamel.
g.
Finish: Semi-Gloss, Acrylic - Two coats Rodda 533589 WoodMaster Premium Semi-Gloss.
h.
Finish: Low-Gloss, Acrylic - Two coats Rodda 533590 WoodMaster Premium Low-Gloss.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
i.
Finish: Semi-Gloss- Two coats Cloverdale 031 Series Renaissance Hybrid Waterborne Alkyd Enamel Semi-Gloss.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
j.
Finish: Satin - Two coats Cloverdale 034 Series Renaissance Hybrid Waterborne Alkyd Enamel Melamine.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
k.
Finish: Gloss, Acrylic - Two coats Rodda 552001 Unique II Gloss.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
l.
Finish: Semi Gloss, Acrylic - Two coats Rodda 542001 Unique II Semi-Gloss.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
m.
Finish: Lo Gloss Acrylic - Two coats Rodda 532001 Unique II Low Gloss.
n.
Finish: Side Sheen Flat Acrylic - Two coats Rodda 512001 Unique II Scrubbable Flat.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
o.
Zero VOC Finish Semi-Gloss: Two coats Rodda 543501 Horizon Semi-Gloss Interior Latex.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
p.
Zero VOC Finish Satin: Two coats Rodda 523501 Horizon Satin Interior Latex.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
q.
Zero VOC Finish Flat: Two coats Rodda 513501 Horizon Flat Interior Latex.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
r.
Ultra Low VOC Commercial Finish: Semi-Gloss - Two coats Rodda 543601 Master Painter Ultra Low Semi-Gloss Interior Latex.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
s.
Finish: Eggshell - Two coats Rodda 533001 Lasyn Interior Latex Eggshell Enamel.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
t.
Ultra Low VOC Commercial Finish: Satin - Two coats Rodda 523601 Master Painter Ultra Low VOC Satin Interior Latex.
u.
Finish: Velvet Flat - Two coats Rodda 513001 Lasyn Interior Velvet Flat Latex.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
v.
Ultra Low VOC Commercial Finish: Flat - Two coats Rodda 513601 Master Painter Ultra Low VOC Interior Latex Flat.
6.
Substrate: Copper Piping.
 
** NOTE TO SPECIFIER ** Select primer. Delete one of the next two paragraphs. The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
a.
Primer: Prime with one coat Carboline Galoseal WB Primer at 0.5-1.0 mils DFT (Waterborne).
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
b.
Primer: Prime with one coat 508901 Metal Master Acrylic Primer (Waterborne).
 
** NOTE TO SPECIFIER ** Select the finish(es) required from the following paragraphs and delete those not required. The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
c.
Wet Environment Finish: Water based Epoxy, Gloss - Two coats Rodda's Cloverdale Ecologic WB 70503 2 Component Epoxy.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
d.
Wet Environment Finish: Water based Epoxy, Semi-Gloss - Two coats Rodda's Cloverdale Ecologic WB 70504 2 Component Epoxy.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
e.
Wet Environment Finish: Water based Epoxy, Satin - Two coats Rodda's Cloverdale Ecologic WB 70505 2 Component Epoxy.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
f.
Finish: Semi Gloss, Acrylic - Two coats Rodda 548901 Multi Master DTM Self Crosslinking Semi Gloss Enamel.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
g.
Finish: Satin, Acrylic - Two coats Rodda 528901 Multi Master DTM Self Crosslinking Satin Enamel.
h.
Finish: Semi-Gloss, Acrylic - Two coats Rodda 533589 WoodMaster Premium Semi-Gloss.
i.
Finish: Low-Gloss, Acrylic - Two coats Rodda 533590 WoodMaster Premium Low-Gloss.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
j.
Finish: Semi-Gloss- Two coats Cloverdale 031 Series Renaissance Hybrid Waterborne Alkyd Enamel Semi-Gloss.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
k.
Finish: Satin - Two coats Cloverdale 034 Series Renaissance Hybrid Waterborne Alkyd Enamel Melamine.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
l.
Finish: Gloss, Acrylic - Two coats Rodda 552001 Unique II Gloss.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
m.
Finish: Semi Gloss, Acrylic - Two coats Rodda 542001 Unique II Semi-Gloss.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
n.
Finish: Lo Gloss Acrylic - Two coats Rodda 532001 Unique II Low Gloss.
o.
Finish: Side Sheen Flat Acrylic - Two coats Rodda 512001 Unique II Scrubbable Flat.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
p.
Zero VOC Finish Semi-Gloss: Two coats Rodda 543501 Horizon Semi-Gloss Interior Latex.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
q.
Zero VOC Finish Satin: Two coats Rodda 523501 Horizon Satin Interior Latex.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
r.
Zero VOC Finish Flat: Two coats Rodda 513501 Horizon Flat Interior Latex.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
s.
Ultra Low VOC Commercial Finish: Semi-Gloss - Two coats Rodda 543601 Master Painter Ultra Low Semi-Gloss Interior Latex.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
t.
Finish: Eggshell - Two coats Rodda 533001 Lasyn Interior Latex Eggshell Enamel.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
u.
Ultra Low VOC Commercial Finish: Satin - Two coats Rodda 523601 Master Painter Ultra Low VOC Satin Interior Latex.
v.
Finish: Velvet Flat - Two coats Rodda 513001 Lasyn Interior Velvet Flat Latex.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
w.
Ultra Low VOC Commercial Finish: Flat - Two coats Rodda 513601 Master Painter Ultra Low VOC Interior Latex Flat.
B.
Interior Drywall:
1.
Substrate: Drywall, Unfinished (General Areas).
 
** NOTE TO SPECIFIER ** Select primer. Delete four of the next five paragraphs. The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
a.
Primer: Prime with one coat Rodda 507801 ScotSeal heavy bodied Acrylic wall board sealer.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
b.
ZERO VOC Primer: Prime with one coat 503501 Horizon Interior Primer.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
c.
ZERO VOC Primer: Prime with one coat Rodda 502701 Roseal II wall board sealer.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
d.
Primer: Prime with one coat Rodda 507901 Vapor Block wall board sealer to achieve moisture vapor barrier rating <1 PERM.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
e.
Primer: Prime with one coat Rodda 532516 Ezee Wall Prep applied at 6-10 mils WFT for Smooth Level 5 finish.
 
** NOTE TO SPECIFIER ** Select the finish(es) required from the following paragraphs and delete those not required. The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
f.
Wet Environment Finish: Water based Epoxy, Gloss - Two coats Rodda's Cloverdale Ecologic WB 70503 2 Component Epoxy.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
g.
Wet Environment Finish: Water based Epoxy, Semi-Gloss - Two coats Rodda's Cloverdale Ecologic WB 70504 2 Component Epoxy.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
h.
Wet Environment Finish: Water based Epoxy, Satin - Two coats Rodda's Cloverdale Ecologic WB 70505 2 Component Epoxy.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
i.
Finish: Semi-Gloss, Acrylic - Two coats Rodda 548901 Multi Master DTM Self Crosslinking Semi-Gloss Enamel.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
j.
Finish: Satin, Acrylic - Two coats Rodda 528901 Multi Master DTM Self Crosslinking Satin Enamel.
k.
Finish: Semi-Gloss, Acrylic - Two coats Rodda 533589 WoodMaster Premium Semi-Gloss.
l.
Finish: Low-Gloss, Acrylic - Two coats Rodda 533590 WoodMaster Premium Low-Gloss.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
m.
Finish: Semi-Gloss- Two coats Cloverdale 031 Series Renaissance Hybrid Waterborne Alkyd Enamel Semi-Gloss.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
n.
Finish: Satin - Two coats Cloverdale 034 Series Renaissance Hybrid Waterborne Alkyd Enamel Melamine.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
o.
Finish: Gloss, Acrylic - Two coats Rodda 552001 Unique II Gloss.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
p.
Finish: Semi-Gloss, Acrylic - Two coats Rodda 542001 Unique II Semi-Gloss.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
q.
Finish: Lo Gloss Acrylic - Two coats Rodda 532001 Unique II Low Gloss.
r.
Finish: Side Sheen Flat Acrylic - Two coats Rodda 512001 Unique II Scrubbable Flat.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
s.
Zero VOC Finish Semi-Gloss 543501 Horizon Semi-Gloss Interior Latex.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
t.
Zero VOC Finish Satin: Two coats Rodda 523501 Horizon Satin Interior Latex.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
u.
Zero VOC Finish Flat: Two coats Rodda 513501 Horizon Flat Interior Latex.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
v.
Ultra Low VOC Commercial Finish: Semi-Gloss - Two coats Rodda 543601 Master Painter Ultra Low Semi-Gloss Interior Latex.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
w.
Finish: Eggshell - Two coats Rodda 533001 Lasyn Interior Latex Eggshell Enamel.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
x.
Ultra Low VOC Commercial Finish: Satin - Two coats Rodda 523601 Master Painter Ultra Low VOC Satin Interior Latex.
y.
Finish: Velvet Flat - Two coats Rodda 513001 Lasyn Interior Velvet Flat Latex.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
z.
Ultra Low VOC Commercial Finish: Flat - Two coats Rodda 513601 Master Painter Ultra Low VOC Interior Latex Flat.
C.
Interior Masonry, Concrete and Plaster.
1.
Substrate: Masonry and Brick (non-porous):
 
** NOTE TO SPECIFIER ** The following three product meets USGBC LEED IEQ 4.2 Credit req'ts. Select primer. Delete two of the next three paragraphs.
 
a.
Primer: One coat 501801 Surfbond II Acrylic Masonry Conditioner Primer.
b.
Primer: Finish: Rodda 512301 pHlex-tite acrylic elastomeric Primer / Finish..
c.
Primer: Prime with one coat Rodda 501601 First Coat Acrylic Latex Primer.
 
** NOTE TO SPECIFIER ** Select the finish(es) required from the following paragraphs and delete those not required. The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
d.
Wet Environment Finish: Water based Epoxy, Gloss - Two coats Rodda's Cloverdale Ecologic WB 70503 2 Component Epoxy.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
e.
Wet Environment Finish: Water based Epoxy, Semi-Gloss - Two coats Rodda's Cloverdale Ecologic WB 70504 2 Component Epoxy.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
f.
Wet Environment Finish: Water based Epoxy, Satin - Two coats Rodda's Cloverdale Ecologic WB 70505 2 Component Epoxy.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
g.
Finish: Semi-Gloss, Acrylic - Two coats Rodda 548901 Multi Master DTM Self Crosslinking Semi-Gloss Enamel.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
h.
Finish: Satin, Acrylic - Two coats Rodda 528901 Multi Master DTM Self Crosslinking Satin Enamel.
i.
Finish: Semi-Gloss, Acrylic - Two coats Rodda 533589 WoodMaster Premium Semi-Gloss.
j.
Finish: Low-Gloss, Acrylic - Two coats Rodda 533590 WoodMaster Premium Low-Gloss.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
k.
Finish: Semi-Gloss- Two coats Cloverdale 031 Series Renaissance Hybrid Waterborne Alkyd Enamel Semi-Gloss.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
l.
Finish: Satin - Two coats Cloverdale 034 Series Renaissance Hybrid Waterborne Alkyd Enamel Melamine.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
m.
Finish: Gloss, Acrylic - Two coats Rodda 552001 Unique II Gloss.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
n.
Finish: Semi-Gloss, Acrylic - Two coats Rodda 542001 Unique II Semi-Gloss.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
o.
Finish: Lo Gloss Acrylic - Two coats Rodda 532001 Unique II Low Gloss.
p.
Finish: Side Sheen Flat Acrylic - Two coats Rodda 512001 Unique II Scrubbable Flat.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
q.
Zero VOC Finish Semi-Gloss 543501 Horizon Semi-Gloss Interior Latex.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
r.
Zero VOC Finish Satin: Two coats Rodda 523501 Horizon Satin Interior Latex.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
s.
Zero VOC Finish Flat: Two coats Rodda 513501 Horizon Flat Interior Latex.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
t.
Ultra Low VOC Commercial Finish: Semi-Gloss - Two coats Rodda 543601 Master Painter Ultra Low Semi-Gloss Interior Latex.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
u.
Finish: Eggshell - Two coats Rodda 533001 Lasyn Interior Latex Eggshell Enamel.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
v.
Ultra Low VOC Commercial Finish: Satin - Two coats Rodda 523601 Master Painter Ultra Low VOC Satin Interior Latex.
w.
Finish: Velvet Flat - Two coats Rodda 513001 Lasyn Interior Velvet Flat Latex.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
x.
Ultra Low VOC Commercial Finish: Flat - Two coats Rodda 513601 Master Painter Ultra Low VOC Interior Latex Flat.
2.
Substrate: Concrete Masonry Units (Porous).
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
a.
Block Filler: One coat Rodda 501901 Sprayable Smooth Block Filler. Backroll to fill voids.
 
** NOTE TO SPECIFIER ** Select the finish(es) required from the following paragraphs and delete those not required. The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
b.
Wet Environment Finish: Water based Epoxy, Gloss - Two coats Rodda's Cloverdale Ecologic WB 70503 2 Component Epoxy.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
c.
Wet Environment Finish: Water based Epoxy, Semi-Gloss - Two coats Rodda's Cloverdale Ecologic WB 70504 2 Component Epoxy.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
d.
Wet Environment Finish: Water based Epoxy, Satin - Two coats Rodda's Cloverdale Ecologic WB 70505 2 Component Epoxy.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
e.
Finish: Semi-Gloss, Acrylic - Two coats Rodda 548901 Multi Master DTM Self Crosslinking Semi-Gloss Enamel.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
f.
Finish: Satin, Acrylic - Two coats Rodda 528901 Multi Master DTM Self Crosslinking Satin Enamel.
g.
Finish: Semi-Gloss, Acrylic - Two coats Rodda 533589 WoodMaster Premium Semi-Gloss.
h.
Finish: Low-Gloss, Acrylic - Two coats Rodda 533590 WoodMaster Premium Low-Gloss.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
i.
Finish: Semi-Gloss- Two coats Cloverdale 031 Series Renaissance Hybrid Waterborne Alkyd Enamel Semi-Gloss.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
j.
Finish: Satin - Two coats Cloverdale 034 Series Renaissance Hybrid Waterborne Alkyd Enamel Melamine.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
k.
Finish: Gloss, Acrylic - Two coats Rodda 552001 Unique II Gloss.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
l.
Finish: Semi-Gloss, Acrylic - Two coats Rodda 542001 Unique II Semi-Gloss.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
m.
Finish: Lo Gloss Acrylic - Two coats Rodda 532001 Unique II Low Gloss.
n.
Finish: Side Sheen Flat Acrylic - Two coats Rodda 512001 Unique II Scrubbable Flat.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
o.
Zero VOC Finish Semi-Gloss 543501 Horizon Semi-Gloss Interior Latex.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
p.
Zero VOC Finish Satin: Two coats Rodda 523501 Horizon Satin Interior Latex.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
q.
Zero VOC Finish Flat: Two coats Rodda 513501 Horizon Flat Interior Latex.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
r.
Ultra Low VOC Commercial Finish: Semi-Gloss - Two coats Rodda 543601 Master Painter Ultra Low Semi-Gloss Interior Latex.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
s.
Finish: Eggshell - Two coats Rodda 533001 Lasyn Interior Latex Eggshell Enamel.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
t.
Ultra Low VOC Commercial Finish: Satin - Two coats Rodda 523601 Master Painter Ultra Low VOC Satin Interior Latex.
u.
Finish: Velvet Flat - Two coats Rodda 513001 Lasyn Interior Velvet Flat Latex.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
v.
Ultra Low VOC Commercial Finish: Flat - Two coats Rodda 513601 Master Painter Ultra Low VOC Interior Latex Flat.
3.
Substrate: Cast Concrete (Except Floors).
 
** NOTE TO SPECIFIER ** The following three product meets USGBC LEED IEQ 4.2 Credit req'ts. Select primer. Delete two of the next three paragraphs.
 
a.
Primer: One coat 501801 Surfbond II Acrylic Masonry Conditioner Primer.
b.
Primer: Finish: Rodda 512301 pHlex-tite acrylic elastomeric Primer / Finish.
c.
Primer: Prime with one coat Rodda 501601 First Coat Acrylic Latex Primer.
 
** NOTE TO SPECIFIER ** Select the finish(es) required from the following paragraphs and delete those not required. The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
d.
Wet Environment Finish: Water based Epoxy, Gloss - Two coats Rodda's Cloverdale Ecologic WB 70503 2 Component Epoxy.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
e.
Wet Environment Finish: Water based Epoxy, Semi-Gloss - Two coats Rodda's Cloverdale Ecologic WB 70504 2 Component Epoxy.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
f.
Wet Environment Finish: Water based Epoxy, Satin - Two coats Rodda's Cloverdale Ecologic WB 70505 2 Component Epoxy.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
g.
Finish: Semi-Gloss, Acrylic - Two coats Rodda 548901 Multi Master DTM Self Crosslinking Semi-Gloss Enamel.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
h.
Finish: Satin, Acrylic - Two coats Rodda 528901 Multi Master DTM Self Crosslinking Satin Enamel.
i.
Finish: Semi-Gloss, Acrylic - Two coats Rodda 533589 WoodMaster Premium Semi-Gloss.
j.
Finish: Low-Gloss, Acrylic - Two coats Rodda 533590 WoodMaster Premium Low-Gloss.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
k.
Finish: Semi-Gloss- Two coats Cloverdale 031 Series Renaissance Hybrid Waterborne Alkyd Enamel Semi-Gloss.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
l.
Finish: Satin - Two coats Cloverdale 034 Series Renaissance Hybrid Waterborne Alkyd Enamel Melamine.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
m.
Finish: Gloss, Acrylic - Two coats Rodda 552001 Unique II Gloss.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
n.
Finish: Semi-Gloss, Acrylic - Two coats Rodda 542001 Unique II Semi-Gloss.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
o.
Finish: Lo Gloss Acrylic - Two coats Rodda 532001 Unique II Low Gloss.
p.
Finish: Side Sheen Flat Acrylic - Two coats Rodda 512001 Unique II Scrubbable Flat.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
q.
Zero VOC Finish Semi-Gloss 543501 Horizon Semi-Gloss Interior Latex.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
r.
Zero VOC Finish Satin: Two coats Rodda 523501 Horizon Satin Interior Latex.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
s.
Zero VOC Finish Flat: Two coats Rodda 513501 Horizon Flat Interior Latex.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
t.
Ultra Low VOC Commercial Finish: Semi-Gloss - Two coats Rodda 543601 Master Painter Ultra Low Semi-Gloss Interior Latex.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
u.
Finish: Eggshell - Two coats Rodda 533001 Lasyn Interior Latex Eggshell Enamel.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
v.
Ultra Low VOC Commercial Finish: Satin - Two coats Rodda 523601 Master Painter Ultra Low VOC Satin Interior Latex.
w.
Finish: Velvet Flat - Two coats Rodda 513001 Lasyn Interior Velvet Flat Latex.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
x.
Ultra Low VOC Commercial Finish: Flat - Two coats Rodda 513601 Master Painter Ultra Low VOC Interior Latex Flat.
4.
Substrate: Ceiling and Overhead Surfaces - Dry Fall Finishes.
 
** NOTE TO SPECIFIER ** Select the finish(es) required from the following paragraphs and delete those not required. The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
a.
Finish: Flat, Latex, Rodda 513801 100 percent Acrylic Dry Fall Flat White base.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
b.
Finish: Flat, Rodda 513899 100 percent Acrylic Dry Fall Flat Black.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
c.
Finish: Eggshell, Latex, Rodda 533801 Acrylic Dry Fall Eggshell White base.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
d.
Finish: Semi-Gloss, Latex Rodda 543801 Acrylic Dry Fall Semi-Gloss White base.
D.
Interior Wood:
1.
Substrate: Wood - Opaque Finish.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
a.
Primer: One coat Rodda 502001 Unique II Acrylic Enamel Undercoater.
 
** NOTE TO SPECIFIER ** Select the finish(es) required from the following paragraphs and delete those not required. The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
b.
Wet Environment Finish: Water based Epoxy, Gloss - Two coats Rodda's Cloverdale Ecologic WB 70503 2 Component Epoxy.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
c.
Wet Environment Finish: Water based Epoxy, Semi-Gloss - Two coats Rodda's Cloverdale Ecologic WB 70504 2 Component Epoxy.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
d.
Wet Environment Finish: Water based Epoxy, Satin - Two coats Rodda's Cloverdale Ecologic WB 70505 2 Component Epoxy.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
e.
Finish: Semi-Gloss, Acrylic - Two coats Rodda 548901 Multi Master DTM Self Crosslinking Semi-Gloss Enamel.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
f.
Finish: Satin, Acrylic - Two coats Rodda 528901 Multi Master DTM Self Crosslinking Satin Enamel.
g.
Finish: Semi-Gloss, Acrylic - Two coats Rodda 533589 WoodMaster Premium Semi-Gloss.
h.
Finish: Low-Gloss, Acrylic - Two coats Rodda 533590 WoodMaster Premium Low-Gloss.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
i.
Finish: Semi-Gloss- Two coats Cloverdale 031 Series Renaissance Hybrid Waterborne Alkyd Enamel Semi-Gloss.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
j.
Finish: Satin - Two coats Cloverdale 034 Series Renaissance Hybrid Waterborne Alkyd Enamel Melamine.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
k.
Finish: Gloss, Acrylic - Two coats Rodda 552001 Unique II Gloss.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
l.
Finish: Semi Gloss, Acrylic - Two coats Rodda 542001 Unique II Semi-Gloss.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
m.
Finish: Lo Gloss Acrylic - Two coats Rodda 532001 Unique II Low Gloss.
n.
Finish: Side Sheen Flat Acrylic - Two coats Rodda 512001 Unique II Scrubbable Flat.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
o.
Zero VOC Finish Semi-Gloss: Two coats Rodda 543501 Horizon Semi-Gloss Interior Latex.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
p.
Zero VOC Finish Satin: Two coats Rodda 523501 Horizon Satin Interior Latex.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
q.
Zero VOC Finish Flat: Two coats Rodda 513501 Horizon Flat Interior Latex.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
r.
Ultra Low VOC Commercial Finish: Semi-Gloss - Two coats Rodda 543601 Master Painter Ultra Low Semi-Gloss Interior Latex.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
s.
Finish: Eggshell - Two coats Rodda 533001 Lasyn Interior Latex Eggshell Enamel.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
t.
Ultra Low VOC Commercial Finish: Satin - Two coats Rodda 523601 Master Painter Ultra Low VOC Satin Interior Latex.
u.
Finish: Velvet Flat - Two coats Rodda 513001 Lasyn Interior Velvet Flat Latex.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
v.
Ultra Low VOC Commercial Finish: Flat - Two coats Rodda 513601 Master Painter Ultra Low VOC Interior Latex Flat.
 
** NOTE TO SPECIFIER ** The next paragraph is strictly for non-floor applications.
 
2.
Substrate: Wood - Stain with Clear Urethane Varnish Finish.
 
** NOTE TO SPECIFIER ** Delete the next paragraph if a stain coat is not required.
 
a.
Stain Coat: One coat, Rodda 71600x Modern Wood Stain.
b.
Sealer: One coat Rodda 705100 Quick Dry Sanding Sealer, Clear.
 
** NOTE TO SPECIFIER ** Select finish. Delete two of the next three paragraphs.
 
c.
Finish: Satin - Rodda 725100 Aqua Master Varnish Clear Polyurethane Satin.
d.
Finish: Semi-Gloss - Rodda 745100 Aqua Master Varnish Clear Polyurethane Semi-Gloss.
e.
Finish Gloss: Rodda 755100 Aqua Master Varnish Clear Polyurethane Gloss.
 
** NOTE TO SPECIFIER ** The next paragraph is strictly for non-floor applications.
 
3.
Substrate Wood - Clear Lacquer Finish.
a.
Sealer: Rodda 706400 Cat-A-Lac Sanding Sealer.
 
** NOTE TO SPECIFIER ** Select the finish(es) required from the following paragraphs and delete those not required.
 
b.
Finish: Satin, Two coats Rodda 726400 Cat-A-Lac Pre-Catalyzed Clear Lacquer.
c.
Finish: Semi-Gloss, Two coats Rodda 746400 Cat-A-Lac Pre-Catalyzed Clear Lacquer.
d.
Finish: Gloss, Acrylic - Two coats Rodda 756400 Cat-A-Lac Pre-Catalyzed Clear Lacquer.
4.
Substrate Wood - Opaque Lacquer Finish.
a.
Sealer: Lacquer Primer Surfacer 706201.
 
** NOTE TO SPECIFIER ** Select the finish(es) required from the following paragraphs and delete those not required.
 
b.
Finish: Satin, Two coats 726401 Cat-A-Lac Pre-Catalyzed Lacquer White.
c.
Finish: Semi-Gloss, Two coats 746401 Cat-A-Lac Pre-Catalyzed Lacquer White.
d.
Finish: Gloss, Acrylic - Two coats 756401 Cat-A-Lac Pre-Catalyzed Lacquer White.
 
** NOTE TO SPECIFIER ** The next paragraph is strictly for non-floor applications.
 
5.
Substrate Wood - Stain or Clear Interior Waterborne Finish.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
a.
Stain: Cloverdale 06680 WeatherOne Semi-Transparent 100% Acrylic Stain.
b.
Sealer for Clear: Cloverdale 593 Series Waterborne Alkyd Varnish (self-seal with finish coat).
 
** NOTE TO SPECIFIER ** Select the finish(es) required from the following paragraphs and delete those not required.
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
c.
Finish: Low Lustre, Cloverdale 59304 Waterborne Alkyd Varnish Low Lustre.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
d.
Finish: Satin, Cloverdale 59314 Waterborne Alkyd Varnish Satin.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
e.
Finish: Semi-Gloss, Cloverdale 59324 Waterborne Alkyd Varnish Semi-Gloss.
 
** NOTE TO SPECIFIER ** The following product meets USGBC LEED IEQ 4.2 Credit req'ts.
 
f.
Finish: Gloss, Cloverdale 59334 Waterborne Alkyd Varnish Gloss.
PART 3 EXECUTION
 
3.1
EXAMINATION
A.
Do not begin installation until substrates have been properly prepared.
B.
Ensure that surfaces to receive coatings are dry immediately prior to application.
C.
Ensure that moisture-retaining substrates to receive coatings have moisture content within tolerances allowed by coating manufacturer. Where exceeding the following values, promptly notify Architect and obtain direction before beginning work.
1.
Concrete and Masonry: 13 percent. Cure minimum 28 days.
2.
Exterior Wood: 17 percent.
3.
Interior Wood: 15 percent.
4.
Interior Finish Detail Woodwork, Including Trim, and Casework: 10 percent.
5.
Plaster and Gypsum: 15 percent.
6.
Concrete Slab-On-Grade: Perform calcium chloride test over 24 hour period or other acceptable test to manufacturer. Verify acceptable moisture transmission and pH levels.
D.
Examine surfaces to receive coatings for surface imperfections and contaminants that could impair performance or appearance of coatings, including but not limited to, loose primer, rust, scale, oil, grease, mildew, algae, or fungus, stains or marks, cracks, indentations, or abrasions.
E.
Correct conditions that could impair performance or appearance of coatings in accordance with specified surface preparation procedures before proceeding with coating application.
3.2
PREPARATION - GENERAL
A.
Clean surfaces thoroughly prior to coating application.
B.
Do not start work until surfaces to be finished are in proper condition to produce finished surfaces of uniform, satisfactory appearance.
C.
Stains and Marks: Remove completely, if possible, using materials and methods recommended by coating manufacturer; cover stains and marks which cannot be completely removed with isolating primer or sealer recommended by coating manufacturer to prevent bleed-through.
D.
Remove Mildew, Algae, and Fungus using materials and methods recommended by coating manufacturer.
E.
Remove dust and loose particulate matter from surfaces to receive coatings immediately prior to coating application.
F.
Remove or protect adjacent hardware, electrical equipment plates, mechanical grilles and louvers, lighting fixture trim, and other items not indicated to receive coatings.
G.
Move or protect equipment and fixtures adjacent to surfaces indicated to receive coatings to allow application of coatings.
H.
Protect adjacent surfaces not indicated to receive coatings.
I.
Prepare surfaces in accordance with manufacturer's instructions for specified coatings and indicated materials, using only methods and materials recommended by coating manufacturer.
 
** NOTE TO SPECIFIER ** Retain only substrates found on this project and delete all others. Substrates are listed alphabetically. If a substrate on the project is not listed in this section, contact Rodda Paint for acceptability and recommended coating type.
 
3.3
SURFACE PREPARATION
A.
Asphalt - Pavement Markings on Bituminous Materials: Remove foreign materials that could impair coating performance or appearance; apply specified primer for maximum coating adhesion.
B.
Concrete and Concrete Masonry: Clean surfaces free of loose particles, sand, efflorescence, laitance, form oil, curing compounds, and other substances which could impair coating performance or appearance.
C.
Concrete Floors: Remove contaminants which could impair coating performance or appearance. Verify moisture transmission and alkaline-acid balance recommended by coating manufacturer; mechanically abrade surface SSPC SP6 or Blast Track, to achieve 80-100 grit medium-sandpaper texture.
D.
Existing Coatings:
1.
Remove surface irregularities by scraping or sanding to produce uniform substrate for coating application; apply one coat primer of type recommended by coating manufacturer for maximum coating adhesion.
2.
If presence of lead in existing coatings is suspected, cease surface preparation and notify Architect immediately.
E.
Gypsum Board: Repair cracks, holes and other surface defects with joint compound to produce surface flush with adjacent surfaces.
F.
Masonry Surfaces - Restored: Remove loose particles, sand, efflorescence, laitance, cleaning compounds and other substances that could impair coating performance or appearance.
G.
Metals - Aluminum, Mill-Finish: Clean surfaces with a solvent or water based industrial cleaner. Scuff sand smooth surfaces to create profile for adhesion. Flush with clean water and allow to dry, before applying primer coat. Test adhesion of primer to ensure performance.
H.
Metals - Copper: Clean surfaces with a solvent or water based industrial cleaner. Scuff sand smooth surfaces to create profile for adhesion. Flush with clean water and allow to dry, before applying primer coat. Test adhesion of primer to ensure performance.
I.
Metals - Ferrous, Unprimed: Follow SSPC SP3 surface preparation. Remove rust or scale, if present, by wire brush cleaning, power tool cleaning, or sandblast cleaning; remove grease, oil, and other contaminants which could impair coating performance or appearance by solvent cleaning, with phosphoric-acid solution cleaning of welds, bolts and nuts; spot-prime repaired welds with specified primer.
J.
Metals - Ferrous, Shop-Primed: Follow SSPC SP3 surface preparation. Remove loose primer and rust, if present, by scraping and sanding, feathering edges of cleaned areas to produce uniform flat surface; solvent-clean surfaces and spot-prime bare metal with specified primer, feathering edges to produce uniform flat surface.
K.
Metals - Galvanized Steel (not passivated): Clean with a water-based industrial strength cleaner, apply 78100 ClovaClean adhesion promoter followed by a clean water rinse; or wipe down surfaces using clean, lint-free cloths saturated with xylene or lacquer thinner; followed by wiping the surface dry using clean, lint-free cloths. Test adhesion of primer to ensure performance.
L.
Metals - Galvanized Steel, Passivated: Clean with water-based industrial strength cleaner, and/or "Brush Blast" in accordance with SSPC-SP7. After the surface has been prepared, apply recommended primer to a small area. Allow primer to cure for 7 days, and test adhesion using the "cross-hatch adhesion tape test" method in accordance with ASTM D 3359. If the adhesion of the primer is positive, proceed with a recommended coating system for galvanized metal.
M.
Metals - Stainless Steel: Clean surfaces with pressurized steam, pressurized water, or water-based industrial cleaner. Test adhesion of primer to ensure performance.
N.
Plaster: Repair cracks, holes and other surface defects as required to maintain proper surface adhesion. Apply patching plaster or Joint compound and sand to produce surface flush with adjacent undamaged surface. Allow a full cure prior to coating application as recommended by the patching compound manufacturer's recommendations.
O.
Polyvinyl Chloride (PVC) Pipe: remove contaminants and markings with denatured alcohol scuff sand and wipe with solvent for maximum adhesion. Test adhesion before starting the job.
P.
Fiberglass Doors - remove contaminants with cleaning solvent (alcohol) scuff sand and wipe. Test adhesion of primer before starting job.
Q.
Textiles - Insulated Coverings, Canvas or Cotton: Clean using high-pressure air and solvent of type recommended for material.
R.
Wood:
1.
Seal knots, pitch streaks, and sap areas with sealer recommended by coating manufacturer; fill nail recesses and cracks with filler recommended by coating manufacturer; sand surfaces smooth.
2.
Apply primer coat to back of wood trim and paneling.
S.
Wood Doors: Seal door tops and bottoms prior to finishing.
T.
Wood - Field-Glazed Frames and Sash: Prime or seal glazing channels prior to glazing.
3.4
APPLICATION - GENERAL
A.
Apply each coat to uniform coating thickness in accordance with manufacturer's instructions, not exceeding manufacturer's specified maximum spread rate for indicated surface; thins, brush marks, roller marks, orange-peel, or other application imperfections are not permitted.
B.
Allow manufacturer's specified drying time, and ensure correct coating adhesion, for each coat before applying next coat.
C.
Inspect each coat before applying next coat; touch-up surface imperfections with coating material, feathering, and sanding if required; touch-up areas to achieve flat, uniform surface without surface defects visible from 5 feet (1.5 m).
D.
Do not apply succeeding coat until Architect has approved previous coat; only Architect-approved coats will be considered in determining number of coats applied.
E.
Remove dust and other foreign materials from substrate immediately prior to applying each coat.
F.
Where coating application abuts other materials or other coating color, terminate coating with a clean sharp termination line without coating overlap.
G.
Where color changes occur between adjoining spaces, through framed openings that are of same color as adjoining surfaces, change color at outside stop corner nearest to face of closed door.
H.
Re-prepare and re-coat unsatisfactory finishes; refinish entire area to corners or other natural terminations.
3.5
CLEANING
A.
Clean excess coating materials, and coating materials deposited on surfaces not indicated to receive coatings, as construction activities of this section progress; do not allow to dry.
B.
Re-install hardware, electrical equipment plates, mechanical grilles and louvers, lighting fixture trim, and other items that have been removed to protect from contact with coatings.
C.
Reconnect equipment adjacent to surfaces indicated to receive coatings.
D.
Relocate to original position equipment and fixtures that have been moved to allow application of coatings.
E.
Remove protective materials.
3.6
PROTECTION
A.
Protect completed coating applications from damage by subsequent construction activities.
B.
Repair to Architect's acceptance coatings damaged by subsequent construction activities. Where repairs cannot be made to Architect's acceptance, re-apply finish coating to nearest adjacent change of surface plane, in both horizontal and vertical directions.
END OF SECTION