Customize this spec with SpecWizard
Download SECTION 10 28 13.19 HEALTHCARE TOILET ACCESSORIES for
WORD | RTF | Text | Word Perfect
Find over 500 more CSI Sections
on Arcat.com
Switch to Masterformat 95
 
SECTION 10 28 13.19
HEALTHCARE TOILET ACCESSORIES
 
 
Copyright 2010 - 2015 ARCAT, Inc. - All rights reserved
** NOTE TO SPECIFIER ** American Specialties, Inc.; washroom and hospital toilet accessories.
.
This section is based on products manufactured byAmerican Specialties, Inc., which is located at:
441 Saw Mill River Rd.
Yonkers, NY 10701
Tel: 914-476-9000
Fax: 914-476-0688
Email: request info (info@americanspecialties.com)
Web: www.americanspecialties.com
[ Click Here ] for additional information.
ASI is the world's largest manufacturer of a complete line of washroom, hospital, and security accessories, public telephone enclosures, and directory accommodations, as well as modular wall systems. These products are offered for use in all types of commercial and institutional projects.
See our SpecWizard: Click Here
 
PART 1 GENERAL
 
1.1
SECTION INCLUDES
 
** NOTE TO SPECIFIER ** Delete items below not required.
 
A.
Cabinet-type toilet accessories.
1.
Roval Collection.
2.
Simplicity Collection.
3.
Profile Collection.
4.
Traditional Collection.
B.
Toilet accessories.
C.
Grab bars.
D.
Electric hand dryers.
1.2
RELATED SECTIONS
 
** NOTE TO SPECIFIER ** Delete sections not relevant; add others as required.
 
A.
Section 09 21 16.23 - Gypsum Board Shaft Wall Assemblies.
B.
Section 09 30 00 - Tiling.
C.
Section 10 21 00 - Compartments and Cubicles.
D.
Section 10 28 13.13 - Commercial Toilet Accessories.
1.3
REFERENCES
 
** NOTE TO SPECIFIER ** Delete references not required.
 
A.
Americans with Disabilities Act Accessibility Guidelines (ADA).
1.4
SUBMITTALS
A.
Submit under provisions of Section 01 30 00 - Administrative Requirements.
B.
Product Data: Manufacturer's product data for products specified, indicating selected options and accessories.
C.
Shop Drawings:
1.
Plans: Locate each specified unit in project.
2.
Elevations: Indicate mounting height of each product.
3.
Details: Indicate anchoring and fastening details, required locations and types of anchors and reinforcement, and materials required for installation of specified products.
 
** NOTE TO SPECIFIER ** Delete requirements not required. Coordinate project requirements with section product attributes and submittals.
 
D.
LEED Requirements: Provide products required by this section with attributes that contribute to the project sustainability goals:
1.
MR Credit 4.1 - Recycled Content (post-consumer).
2.
MR Credit 4.2 - Recycled Content (post-industrial).
E.
Verification Samples: Two sample chips of each specified color and finish.
F.
Quality Assurance Submittals:
1.
Manufacturer's printed installation instructions for each specified product.
2.
Documentation of Manufacturer's Qualifications, specified in 1.5 of this Section.
G.
Closeout Submittals: Warranty, issued and executed by manufacturer, and countersigned by Contractor.
1.5
QUALITY ASSURANCE
A.
Manufacturer Qualifications: Minimum five years documented experience producing products specified.
B.
Source Limitations: To the greatest extent possible products shall be provided by a single manufacturer.
1.6
DELIVERY, STORAGE, AND HANDLING
A.
Ship products in manufacturer's standard protective packaging with vinyl coating on exposed surfaces.
B.
Storage and Protection: Store products in manufacturer's protective packaging until installation.
1.7
SEQUENCING
A.
Supply locations, dimensions, and other pertinent details to installing Contractor for coordination of blocking, support and recess size and locations required for accessory installation.
1.8
WARRANTY
A.
Manufacturer's standard warranty against defects in product workmanship and materials.
 
** NOTE TO SPECIFIER ** Delete if not required.
 
B.
Manufacturer's 15-year warranty against silver spoilage of mirrors.
PART 2 PRODUCTS
 
2.1
MANUFACTURERS
A.
Acceptable Manufacturers: American Specialties, Inc.; 441 Saw Mill River Road, Yonkers NY 10701-4913. ASD. Tel: (914) 476-9000. Fax: (914) 476-0688. Email: infoatamericanspecialties.com. Web: http://www.americanspecialties.com.
 
** NOTE TO SPECIFIER ** Select one of the two paragraphs below; coordinate with Section 01600.
 
B.
Requests for substitutions will be considered in accordance with provisions of Section 01 60 00 - Product Requirements.
C.
Substitutions: Not permitted.
2.2
CABINET-TYPE TOILET ACCESSORlES (ROVAL COLLECTION)
A.
Basic Construction Requirements:
1.
Doors: Curved design, one piece stainless steel.
2.
Cabinets: Stainless steel, trimless; joints welded, sight-exposed welds finished to match sheet finish. Full access back panels.
3.
Hinges: Concealed, multi-staked stainless steel piano hinge, full length of cabinet.
4.
Locks: 2 flush, rimless tumbler locks, keyed alike other toilet accessory locks, with one key for each lock.
5.
Exposed Finish: Satin finish, unless noted otherwise.
B.
Feminine Hygiene Disposals: Roval Collection by ASI.
1.
Recessed Sanitary Napkin Disposal: Model 20470. Heavy-duty 9/64 in (3.6 mm) staked piano hinge construction. Drawn one piece seamless door of 22 ga type 304 stainless steel with a satin finish. 1 gal (3.7 L) waste capacity.
2.
Dual Access Partition Mounted Sanitary Napkin Disposal: Model 20472. Heavy-duty 9/64 in (3.6 mm) staked piano hinge construction. Drawn one piece seamless door of 22 ga type 304 stainless steel with a satin finish. 1 gal (3.7 L) waste capacity. Mounts through partitions up to 1-1/4 in (32 mm) thick. Expandable steel waste can ensures a perfect fit for thicker partitions.
3.
Surface Mounted Sanitary Waste Receptacle: Model 20852. Lid and cabinet are each drawn one piece construction. Lid is secured to the cabinet with a heavy-duty 9/64 in (3.6 mm) multi-staked concealed piano hinge.
C.
Feminine Hygiene Vendors: Roval Collection by ASI.
1.
Recessed Dual Sanitary Napkin and Tampon Dispenser: Model 204684. Dispenses 31 napkins and 22 tampons. Door made of 18 ga type 304 satin finish stainless steel, with two flush tumbler locks. Universal coin mechanism is convertible for 25 cents, 50 cents or FREE (no coin) operation. Coin boxes have different lock and key than doors.
2.
Surface Mounted Dual Sanitary Napkin and Tampon Dispenser: Model 204684-9. Dispenses 31 napkins and 22 tampons. Door made of 18 ga type 304 satin finish stainless steel, with two flush tumbler locks. Universal coin mechanism is convertible for 25 cents, 50 cents or FREE (no coin) operation. Coin boxes have different lock and key than doors and collar for surface mounting.
D.
Mirrors: Roval Collection by ASI.
1.
Stainless Steel Mirror: Model 20650. Radiused edges complement the curves of the ASI Roval Collection. Frame fabricated of 18 ga type 304 stainless steel with satin finish and polished seamless mitered corners. 1/4 in (6.4 mm) thick plate glass mirror.
2.
Stainless Steel Mirror (Tempered Glass): Model 20650-B. Radiused edges complement the curves of the ASI Roval Collection. Frame fabricated of 18 ga type 304 stainless steel with satin finish and polished seamless mitered corners. 1/4 in (6.4 mm) thick plate glass mirror.
3.
Stainless Steel Mirror With Integral Shelf: Model 20655. The gently radiused edges provide added strength and complement the curves of the ASI Roval Collection. Mirror frame and 6 in (152 mm) wide curved edge shelf are fabricated of 18 ga type 304 stainless steel with satin finish. Mirror frame has polished seamless mitered corners. 0.25 in (6.4 mm) thick plate glass mirror.
4.
Stainless Steel Mirror With Integral Shelf: Model 20655-B. The gently radiused edges provide added strength and complement the curves of the ASI Roval Collection. Mirror frame and 6 in (152 mm) wide curved edge shelf are fabricated of 18 ga type 304 stainless steel with satin finish. Mirror frame has polished seamless mitered corners. 0.25 in (6.4 mm) thick tempered glass mirror.
E.
Paper Towel Combination Units: Roval Collection by ASI.
1.
Recessed Paper Towel Dispenser and Removable Waste Receptacle: Model 204623. Dispenses 350 C-fold, 475 multi-fold paper towels. 2.96 gal (11.2 L) removable stainless steel waste receptacle with a tumbler lock. 22 ga type 304 stainless steel door in a satin finish with a flush lock and a heavy-duty 3/16 in (4.8 mm) staked piano hinge on door.
2.
Surface Mounted Paper Towel Dispenser and Removable Waste Receptacle: Model 204623-9. Dispenses 350 C-fold, 475 multi-fold paper towels. 2.96 gal (11.2 L) removable stainless steel waste receptacle with a tumbler lock. 22 ga type 304 stainless steel door in a satin finish with a flush lock and a heavy-duty 3/16 in (4.8 mm) staked piano hinge on door with collar for surface mounting.
3.
Recessed Paper Towel Dispenser and Removable Waste Receptacle: Model 20469. Dispenses 600 C-fold or 800 multi-fold paper towels. 14.8 gal (56 L) removable waste receptacle. Door made of 18 ga type 304 stainless steel with a heavy-duty 3/16 in (4.8 mm) staked piano hinge.
4.
Surface Mounted Paper Towel Dispenser and Removable Waste Receptacle: Model 20469-9 - Dispenses 600 C-fold or 800 multi-fold paper towels. 14.8 gal (56 L) removable waste receptacle. Door made of 18 ga type 304 stainless steel with a heavy-duty 3/16 in (4.8 mm) staked piano hinge with collar for surface mounting.
5.
Recessed Automatic Roll Paper Towel Dispenser and Waste Receptacle: Model 204692A. 18 ga type 304 stainless steel. 17.8 gal (67.2 L) removable receptacle.
6.
Recessed Automatic Roll Paper Towel Dispenser and Waste Receptacle for ADAAG Compliance: Model 2046921A. Fabricated of 18 ga type 304 stainless steel. Smaller waste receptacle, 13.5 gal (51.1 L), allows installation according to ADAAG. Internal shelf is ideal for paper towel storage.
F.
Paper Towel Dispensers: Roval Collection by ASI.
1.
Paper Towel Dispenser: Model 20210. Dispenses 400 C-fold or 525 multi-fold paper towels. Fabricated of 22 ga type 304 stainless steel with satin finish. Fitted with tumbler lock and heavy-duty stainless steel staked piano hinge.
2.
Paper Towel Dispenser: Model 20452. Dispenses 600 C-fold or 800 multi-fold paper towels. Door fabricated of 18 ga type 304 drawn one piece stainless steel with satin finish. Door secured with 3/16 in (4.8 mm) staked piano hinge and flush tumbler lock.
3.
Recessed Automatic Roll Paper Towel Dispenser: Model 204523A. 22 gauge satin stainless.
G.
Surface Mounted Shelf: Model 20692, Roval Collection by ASI. 18 gauge type 304 stainless, 6 in (152 mm) wide shelf, radiused edges. Sizes as scheduled or indicated on Drawings.
H.
Soap Dispensers: Roval Collection by ASI.
1.
Automatic Soap or Hand Sanitizer Dispenser: Model 0362. Satin stainless steel, IR sensor, battery operated. Tamper resistant soap level viewing window, removable lid with special lock and key. Suitable for dispensing higher viscosity soaps. Capacity: 27 fl oz (800 mL) when using disposable soap cartridge (by others) or 30 fl oz (900 mL) when using provided refillable soap cartridge. Suitable for antimicrobial soaps.
2.
Automatic Soap or Hand Sanitizer Dispenser: Model 0363. Bright polish stainless, IR sensor, battery operated. Tamper resistant soap level viewing window, removable lid with special lock and key. Suitable for dispensing higher viscosity soaps. Capacity: 27 fl oz (800 mL) when using disposable soap cartridge (by others) or 30 fl oz (900 mL) when using provided refillable soap cartridge. Suitable for antimicrobial soaps.
3.
Automatic Deck Mounted Soap Dispenser: Model 20333. Constructed of polished type 304 stainless steel on exposed surfaces with battery-operated, hands-free sensor. LEDs indicate function, battery condition and soap supply level on face front. Translucent tank holds 54 oz (1600 mL) of liquid soap.
4.
Automatic Soap Dispenser: Model 20364. Hands-free, battery-operated soap dispenser. Dispensing cycles adjustable with tamper proof magnetic key. Seamless drawn type 304 stainless steel cover. Translucent removable internal tank to view soap level. LED indicates adjustment and operation. Capacity: 33.8 oz (1000 mL).
5.
Surface Mounted Vertical Soap Dispenser: Model 20363. Push button operated soap dispenser. Valve operation complies with ADAAG, needing no more than 5 lb of pressure to actuate. Seamless drawn type 304 stainless steel cover. Translucent removable internal tank for easy-to-view soap level. Gently radiused edge complements the curves of the ASI Roval Collection. Capacity: 57 oz (1.7 L).
6.
Automatic Foam Soap Dispenser: Model 20365. A foam drop is dispensed out of the nozzle on unit bottom each time its battery-operated sensor is activated. Capacity: 34 oz (1000 mL) of liquid foaming soaps within a wide range of viscosity.
I.
Toilet Tissue Dispensers/Holders: Roval Collection by ASI.
1.
Surface Mounted Twin Hide-A-Roll Toilet Tissue Dispenser: Model 20030. Holds two rolls up to 5-1/4 in (133 mm) dia (double roll capacity 3600 sheets). Top roll automatically drops in place when bottom roll is done. Type 304 satin finish stainless cabinet and mechanism. Theft-resistant spindles with integral plated steel endpins.
2.
Semi-Recessed Mounted Twin Hide-A-Roll Toilet Tissue Dispenser: Model 20031. Holds two rolls up to 5-1/4 in (133 mm) dia (double roll capacity 3600 sheets). Top roll automatically drops in place when bottom roll is used up. Type 304 satin finish stainless steel cabinet and mechanism. Theft-resistant spindles with integral plated steel endpins with flange for semi-recessing.
3.
Surface Mounted Seat Cover Dispenser: Model 20477-SM. Dispenses 250 seat covers. Fabricated of 20 ga type 304 stainless steel with a satin finish.
J.
Waste Receptacles: Roval Collection by ASI.
1.
Semi-Recessed Removable Waste Receptacle: Model 20458. Easy maintenance removable stainless steel waste receptacle locks into cabinet with a tumbler lock for security. Capacity 11.2 gal (42.6 L). 20 ga type 304 stainless steel with satin finish.
2.
Surface Mounted Waste Receptacle: Model 20826. Receptacle front and sides fabricated of 20 ga type 304 stainless steel with satin finish. Capacity 11 gal (42 L).
2.3
CABINET-TYPE TOILET ACCESSORlES (SIMPLICITY COLLECTION)
A.
Basic Construction Requirements:
1.
Doors: 18 ga stainless steel, formed 1/2 in (13 mm) return to wall.
2.
Cabinets: 20 ga stainless steel, formed 1 in (25 mm) wide flat perimeter trim four sides; joints welded, sight-exposed welds finished to match sheet finish.
3.
Hinges: Stainless steel piano hinge, 3/16 in (4.8 mm) dia barrel, full length of cabinet; hinge leaves spot-welded to door and cabinet body.
4.
Locks: Tumbler locks, keyed alike other toilet accessories, with two keys for ea lock.
5.
Cabinet and Door Finish: Satin finish.
6.
Accessories: Mounting collars.
B.
Feminine Hygiene Disposals: Model 6471, Simplicity Collection by ASI. Self-closing stainless push door covers disposal opening. 1.9 gal (7.2 L) stainless steel waste receptacle.
C.
Feminine Hygiene Vendors: Simplicity Collection by ASI.
1.
Dual Napkin/Tampon Vendor: Model 6468. Dispenses 30 feminine napkins and 27 tampons. Available for 25 cents, 50 cents or free operation. Door locked by two tumbler locks. Inside coin box has separately keyed lock.
2.
Dual Napkin/Tampon Vendor: Model 64684. Dispenses 15 feminine napkins and 23 tampons and recesses into 4 in (102 mm) wall. 25 cents, 50 cents or free operation. Door locked by two tumbler locks. Inside coin box has separately keyed lock.
D.
Paper Towel Combination Units: Simplicity Collection by ASI.
1.
Paper Towel Dispenser and Waste Receptacle: Model 6462. adapter allows changing from 1,000 single-fold to 600 C-fold or 800 multi-fold towels. 9 gal (34 L) receptacle.
2.
Paper Towel Dispenser and Waste Receptacle: Model 6462-2. Provided adapter allows changing from 1,000 single-fold towels to 600 C-fold or 800 multi-fold towels. 9 gal (34 L) receptacle with stainless collar for semi-recessing in 4 in (102 mm) walls.
3.
Paper Towel Dispenser and Waste Receptacle: Model 6462-9. Provided adapter allows changing from up to 1,000 single-fold towels to 600 C-fold or 800 multi-fold towels. 9 gal (34 L) waste receptacle with stainless steel collar for surface mounting.
4.
Recessed Paper Towel Dispenser and Waste Receptacle: Model 64623. Dispenses 350 C-fold or 475 multi-fold paper towels. 10.5 gal (39.7 L) stainless waste receptacle.
5.
Recessed Paper Towel Dispenser and Waste Receptacle: Model 64623-9. Dispenses 350 C-fold or 475 multi-fold paper towels. 10.5 gal (39.7 L) stainless steel waste receptacle with a stainless steel collar for surface mounting.
6.
Paper Towel Dispenser and Waste Receptacle: Model 6467. Dispenses 600 C-fold or 800 multi-fold paper towels. 5 gal (18.9 L) stainless steel waste receptacle.
7.
Paper Towel Dispenser and Waste Receptacle: Model 6467-9. Dispenses 600 C-fold or 800 multi-fold paper towels. 5 gal (18.9 L) stainless steel waste receptacle with stainless steel collar for surface mounting.
8.
Paper Towel Dispenser and Waste Receptacle: Model 64676. 600 C-Fold, 800 multi-fold or 1100 single-fold towels. 7 gal (26.5 L) stainless steel waste receptacle.
9.
Paper Towel Dispenser and Waste Receptacle: Model 64676-2. 600 C-Fold, 800 multi-fold or 1100 single-fold towels. 7 gal (26.5 L) stainless steel waste receptacle with stainless steel collar for semi-recessing in 4 in (102 mm) walls.
10.
Paper Towel Dispenser and Waste Receptacle: Model 64676-9. 600 C-Fold, 800 multi-fold or 1100 single-fold towels. 7 gal (26.5 L) stainless steel waste receptacle, with a stainless steel collar for surface mounting.
11.
Roll Paper Towel Dispenser and Waste Receptacle (Recessed): Model 64696. Mechanically dispenses 8 in or 9 in (205 or 230 mm) wide, 800 ft (244 m) long rolls in pre-set lengths of 2-1/2 in, 4 in, or 5 in (65, 100, or 125 mm) per stroke. 8.6 gal (32.6 L) stainless steel waste receptacle.
12.
Roll Paper Towel Dispenser and Waste Receptacle (Semi-recessed): Model 64696-6. Mechanically dispenses 8 in or 9 in (205 or 230 mm) wide, 800 ft (244 m) long rolls in pre-set lengths of 2-1/2 in, 4 in, or 5 in (65, 100, or 125 mm) per stroke. 8.6 gal (32.6 L) stainless receptacle with stainless collar for semi-recessing in 4 in (102 mm) walls.
13.
Roll Paper Towel Dispenser and Waste Receptacle (Surface Mounted): Model 64696-9. Mechanically dispenses 8 in or 9 in (205 or 230 mm) wide, 800 ft (244 m) long rolls in pre-set lengths of 2-1/2 in, 4 in, or 5 in (65, 100, or 125 mm) per stroke. 8.6 gal (32.6 L) stainless receptacle with a stainless steel collar for surface mounting.
14.
Automatic Roll Paper Towel Dispenser and Waste Receptacle (Recessed): Model 64696A. Proximity sensing no-touch unit dispenses a pre-set length per cycle from 8 in or 9 in (205 or 230 mm) wide, 800 ft (244 m) long rolls. 8.6 gal (32.6 L) stainless steel waste receptacle. Battery operated (4) D-size.
15.
Automatic Roll Paper Towel Dispenser and Waste Receptacle (Semi-recessed): Model 64696A-6. Proximity sensing no-touch unit dispenses a pre-set length per cycle from 8 in or 9 in (205 or 230 mm) wide, 800 ft (244 m) long rolls. 8.6 gal (32.6 L) stainless steel waste receptacle with stainless steel collar for semi-recessing in 4 in (102 mm) walls. Battery operated (4) D-size.
16.
Automatic Roll Paper Towel Dispenser and Waste Receptacle (Surface Mounted): Model 64696A-9. Proximity sensing no-touch unit dispenses a pre-set length per cycle from 8 in or 9 in (205 or 230 mm) wide, 800 ft (244 m) long rolls. 8.6 gal (32.6 L) stainless steel waste receptacle with a stainless steel collar for surface mounting. Battery operated (4) D-size.
E.
Paper Towel Dispensers: Simplicity Collection by ASI.
1.
Paper Towel Dispenser (Recessed): Model 6452. 600 C-fold or 800 multi-fold towels.
2.
Paper Towel Dispenser: Model 6452-9 (Surface Mounted): Dispenses 600 C-fold or 800 multi-fold paper towels with stainless steel collar for surface mounting.
3.
Paper Towel Dispenser (For the smaller washroom with less space and traffic): Model 6457. Dispenses 350 C-fold or 475 multi-fold paper towels.
F.
Soap Dispensers: Simplicity Collection by ASI.
1.
Recessed Gravity Soap Tank: Model 0376. 22 ga stainless steel, 2 gal (7.6 L) capacity. Combination union and shut-off furnished. Flexible hose has 3/8 in (9.5 mm) male outlet. Locked door and piano hinge.
2.
Liquid Soap Dispenser: Model 6326. Stainless steel with Satin finish, all purpose soap valve, 52 fl oz (1.5 L) capacity, unbreakable refill window.
G.
Toilet Tissue Dispensers/Holders: Model 6477, Simplicity Collection by ASI. Installs in the back wall of toilet compartment. Capacity: 500 seat covers.
H.
Waste Receptacles: Simplicity Collection by ASI.
1.
Waste Receptacle: Model 6459. Self-closing panel covers receptacle opening. 4 gal (15 L) stainless steel waste receptacle.
2.
Waste Receptacle (Recessed): Model 6474. 12 gal (45.4 L) stainless receptacle.
3.
Waste Receptacle (Semi-recessed): Model 6474-2. Waste receptacle is 12 gal (45.4 L) stainless steel with stainless steel collar for semi-recessing in 4 in (102 mm) walls.
2.4
CABINET-TYPE TOILET ACCESSORlES (PROFILE COLLECTION)
A.
Basic Construction Requirements:
1.
Doors: 16 ga stainless steel, formed 15/16 in (23.8 mm) return to wall, with vertical edges eased at 3/4 in (19 mm) radius; welded corners.
2.
Cabinets: 20 ga stainless steel, formed 1 in (25 mm) wide flat perimeter trim four sides; joints welded, sight-exposed welds finished to match sheet finish.
3.
Hinges: Stainless steel piano hinge, 3/16 in (4.8 mm) dia barrel, full length of cabinet; hinge leaves spot-welded to door and cabinet body.
4.
Locks: Flat rimless tumbler locks, keyed like other toilet accessories, with two keys for each lock.
5.
Cabinet and Door Finish: Satin finish.
B.
Feminine Hygiene Disposals: Model 9471, Profile Collection by ASI. Self-closing stainless push-door covers disposal opening. Removable 1.9 gal (7.2 L) stainless waste receptacle.
C.
Feminine Hygiene Vendors: Profile Collection by ASI.
1.
Dual Napkin/Tampon Vendor: Model 9468. Dispenses 30 feminine napkins and 27 tampons. Available for 25 cents, 50 cents or free operation. Door locked by two tumbler locks. Inside coin box has separately keyed lock.
2.
Recessed Dual Napkin/Tampon Dispenser: Model 94684. Designed for 4 in (102 mm) wall. Dispenses 15 napkins, 23 tampons. 25 cents, 50 cents or free operation. Door locked by two tumbler locks. Inside coin box has separately keyed lock.
D.
Paper Towel Combination Units: Profile Collection by ASI.
1.
Paper Towel Dispenser and Waste Receptacle: Model 9462 (towel). 600 C-fold, 800 multi-fold or 1100 single-fold paper towels. 9 gal (34 L) stainless receptacle.
2.
Paper Towel Dispenser and Waste Receptacle: Model 94623 (350 C fold). Dispenses 350 C-fold, 475 multi-fold paper towels. 2 gal (7.6 L) stainless steel waste receptacle.
3.
Paper Towel Dispenser and Waste Receptacle: Model 9467. (600 C fold). Dispenses 600 C-fold or 900 multi-fold paper towels. 5 gal (18.9 L) stainless receptacle.
4.
Paper Towel Dispenser and Waste Receptacle: Model 94676. 6 in (150 mm) deep to dispense 600 C-fold or 900 multi-fold paper towels or 1100 single-fold towels and has push door and 7 gal (26.5 L) capacity.
5.
Paper Towel Dispenser and Waste Receptacle: Model 9469 (600 C fold). Dispenses 600 C-fold or 800 multi-fold paper towels. 13 gal (49 L) waste receptacle.
6.
Paper Towel Dispenser and Waste Receptacle: Model 94696 (roll). Unit dispenses a pre-set length per cycle from 8 in or 9 in (205 or 230 mm) wide, 800 ft (244 m) long rolls. 10 gal (37.8 L) stainless receptacle. Mechanical lever paper towel dispenser.
7.
Paper Towel Dispenser and Waste Receptacle: Model 94696A (auto-dispensing roll). Proximity sensing no-touch unit dispenses a pre-set length per cycle from 8 in or 9 in (205 or 230 mm) wide, 800 ft (244 m) long rolls. 10 gal (37.8 L) stainless steel waste receptacle. Battery operated (4) D-size.
8.
Surface Mounted Paper Towel Dispenser and Waste Receptacle: Model 94696A-9 (auto-dispensing roll). Proximity sensing no-touch unit dispenses a pre-set length per cycle from 8 in or 9 in (205 or 230 mm) wide, 800 ft (244 m) long rolls. 10 gal (37.8 L) stainless steel waste receptacle. Battery operated (4) D-size.
E.
Paper Towel Dispensers: Profile Collection by ASI.
1.
Paper Towel Dispenser (600 C fold): Model 9452. 600 C-fold or 800 multi-fold towels.
2.
Paper Towel Dispenser (350 C fold): Model 9457. 350 C-fold or 475 multi-fold towels.
3.
Paper Towel Dispenser (600 C-fold): Model 9460. 10.5 gal (39.7 L) receptacle.
4.
Paper Towel Dispenser (600 C fold/1100 Single-fold) and Waste Receptacle (7 gal, 26.5 L): Model 94676. 6 in (152 mm) deep.
F.
Soap Dispensers: Profile Collection by ASI.
1.
Liquid Soap Dispenser: Model 9326. Provided with covered stainless steel soap tank attached to door which hinges out for easy filling and cleaning. All purpose valve dispenses liquid, lotion, and detergent-type soaps. Capacity: 52 fl oz (1.5 L).
2.
Surface Mounted Liquid Soap Dispenser: Model 9343. All-purpose soap valve dispenses liquid, lotion and detergent-type soap. Refill window, concealed fastening and hinged filler-top for vandal resistance. Capacity: 48 fl oz (1.4 L).
G.
Toilet Tissue Dispensers/Holders: Profile Collection by ASI.
1.
Surface Mounted Dual Roll Toilet Tissue Dispenser: Model 9030. Holds two rolls up to 5-1/4 in (135 mm) dia (1800 sheets). Top roll automatically drops in place when bottom roll done. Type 304 stainless cabinet and mechanism. Theft resistant spindles.
2.
Recessed Dual Roll Toilet Tissue Dispenser: Model 9031. Holds two rolls up to 5-1/4 in (135 mm) dia (1800 sheets). Top roll automatically drops in place when bottom roll is used up. Type 304 stainless steel cabinet and mechanism. Theft resistant spindles.
3.
Toilet Seat Cover Dispenser: Model 9477. Dispenses 500 seat covers.
4.
Surface Mounted Toilet Seat Cover Dispenser: Model 9477-SM. 500 seat covers.
H.
Waste Receptacles: Profile Collection by ASI.
1.
Waste Receptacle (4 gal, 15 L): Model 9459. Self-closing panel covers receptacle opening. 4 gal (15 L) stainless steel waste receptacle.
2.
Waste Receptacle: Model 9474. Waste receptacle is 12 gal (45.4 L) stainless steel.
2.5
CABINET-TYPE TOILET ACCESSORIES (TRADITIONAL COLLECTION)
A.
Basic Construction Requirements:
1.
Doors: 22 ga stainless steel, double pan construction, with 1/4 in (6 mm) thick structural fiberboard core.
2.
Cabinets: 22 ga stainless steel, formed perimeter trim with 1/4 in (6 mm) return to wall four sides; joints welded, sight-exposed welds finished to match sheet finish.
3.
Hinges: Stainless steel piano hinge, 3/16 in (4.8 mm) dia barrel, full length of cabinet; hinge leaves spot-welded to door and cabinet body.
4.
Locks: Tumbler locks, keyed like other toilet accessories, with two keys for each lock.
5.
Cabinet and Door Finish: Satin finish.
B.
Cabinets: Traditional Collection by ASI.
1.
Multi-Purpose Cabinet (Recessed): Model 0430. Combines shelf, mirror, towel dispenser, and 101 fl oz (3 L) soap dispenser. 600 C-fold or 800 multi-fold towels.
2.
Multi-Purpose Cabinet (Surface Mounting): Model 0430-9. Combines shelf, mirror, towel dispenser, and 101 fl oz (3 L) soap dispenser. Unit dispenses 600 C-fold or 800 multi-fold paper towels with stainless steel collar for surface mounting.
3.
Multi-Purpose Cabinet With Concealed Body: Model 0431. For mounting behind continuous mirror. Shelf, towel dispenser and 101 fl oz (3 L) soap dispenser. Dispenses 600 C-fold or 800 multi-fold paper towels.
4.
Multi-Purpose Cabinet With Concealed Body: Model 0436. For mounting behind continuous mirror. Shelf and towel dispenser. Dispenses 600 C-fold or 800 multi-fold paper towels. Without soap dispenser.
C.
Paper Towel Combination Units: Traditional Collection by ASI.
1.
Paper Towel Dispenser and Waste Receptacle (Recessed): Model 0462-AD. Dispenses 350 C-fold or 475 multi-fold paper towels. 2 gal (7.6 L) waste receptacle.
2.
Paper Towel Dispenser and Waste Receptacle (Surface Mounting): Model 0462-AD-9. Dispenses 350 C-fold or 475 multi-fold paper towels. 2 gal (7.6 L) waste receptacle with stainless steel collar for surface mounting.
3.
Paper Towel Dispenser and Waste Receptacle (Recessed): Model 0467. 600 C-fold, 800 multi-fold or 1100 single-fold paper towels. 6 gal (22.7 L) stainless receptacle.
4.
Paper Towel Dispenser and Waste Receptacle (Semi-recessed): Model 0467-2. Dispenses 600 C-fold, 800 multi-fold or 1100 single-fold paper towels. 6 gal (22.7 L) stainless receptacle with stainless collar for semi-recessing in 4 in (102 mm) walls.
5.
Paper Towel Dispenser and Waste Receptacle (Surface Mount): Model 0467-9. Dispenses 600 C-fold, 800 multi-fold or 1100 single-fold paper towels. 6 gal (22.7 L) stainless steel waste receptacle with stainless steel collar for surface mounting.
6.
Paper Towel Dispenser and Waste Receptacle (Recessed): Model 0469. Dispenses 600 C-fold or 800 multi-fold paper towels. 12 gal (46 L) stainless waste receptacle.
7.
Paper Towel Dispenser and Waste Receptacle: Model 0469-BL. 600 C-fold or 800 multi-fold paper towels. 18 gal (68 L) receptacle. Projects 8 in (205 mm) from wall.
8.
Paper Towel Dispenser and Waste Receptacle (Semi-recessed): Model 0469-2. Dispenses 600 C-fold or 800 multi-fold paper towels. 12 gal (46 L) stainless steel waste receptacle with recessing steel collar for semi-recessing in 2 in (52 mm) walls.
9.
Paper Towel Dispenser and Waste Receptacle (Surface Mount): Model 0469-9. Dispenses 600 C-fold or 800 multi-fold paper towels. 12 gal (46 L) stainless steel waste receptacle with stainless steel collar for surface mounting.
10.
Roll Paper Towel Dispenser and Waste Receptacle: Model 04692. Unit dispenses a pre-set length per cycle from 8 in or 9 in (205 or 230 mm) wide, 800 ft (244 m) long rolls. Mechanical lever dispenser. Three pre-set dispensing lengths.
11.
Roll Paper Towel Dispenser and Waste Receptacle (Semi-recessed): Model 04692-6. Unit dispenses a pre-set length per cycle from 8 in or 9 in (205 or 230 mm) wide, 800 ft (244 m) long rolls. Mechanical lever dispenser. Three pre-set dispensing lengths. Stainless steel collar for semi-recessing in 4 in (102 mm) walls.
12.
Roll Paper Towel Dispenser and Waste Receptacle (Surface Mount): Model 04692-9. Unit dispenses a pre-set length per cycle from 8 in or 9 in (205 or 230 mm) wide, 800 ft (244 m) long rolls. Mechanical lever dispenser. Three pre-set dispensing lengths. Stainless steel collar for surface mounting.
13.
Recessed Roll Towel Dispenser and Waste Receptacle: Model 046921. Dispenses pre-set length per cycle; 8 in or 9 in (205 or 230 mm) wide, 800 ft (244 m) long rolls. 14 gal (53 L) receptacle. Mechanical lever dispenser. 3 pre-set dispensing lengths.
14.
Semi-recessed Roll Towel Dispenser and Waste Receptacle: Model 046921-6. Dispenses a pre-set length per cycle from 8 in or 9 in (205 or 230 mm) wide, 800 ft (244 m) long rolls. 14 gal (53 L) waste receptacle. Mechanical lever dispenser. Three pre-set dispensing lengths. Stainless collar for semi-recessing in 4 in (102 mm) walls.
15.
Surface Mounted Roll Towel Dispenser and Waste Receptacle: Model 046921-9. Dispenses a pre-set length per cycle from 8 in or 9 in (205 or 230 mm) wide, 800 ft (244 m) long rolls. 14 gal (53 L) waste receptacle. Mechanical lever dispenser. Three pre-set dispensing lengths. Stainless steel collar for surface mounting.
16.
Automatic Recessed Roll Towel Dispenser and Waste Receptacle: Model 046921A. Proximity sensing no-touch unit dispenses a pre-set length per cycle from 8 in or 9 in (205 or 230 mm) wide, 800 ft (244 m) long rolls. 14 gal (53 L) waste receptacle. Battery operated (4) D-size.
17.
Recessed Automatic Roll Paper Towel Dispenser and Waste Receptacle: Model 046921AC. Proximity sensing no-touch unit dispenses a pre-set length per cycle from 8 in or 9 in (205 or 230 mm) wide, 800 ft (244 m) long rolls. 14 gal (53 L) waste receptacle. Powered by internal low-voltage adapter (supplied) using 110-240VAC, 50/60 Hz and providing output of 5VDC at 1A.
18.
Semi-Recessed Automatic Roll Towel Dispenser and Waste Receptacle: Model 046921AC-6 - Proximity sensing no-touch unit dispenses a pre-set length per cycle; 8 in or 9 in (205 or 230 mm) wide, 800 ft (244 m) long rolls. 14 gal (53 L) receptacle. Powered by internal low-voltage adapter using 110-240VAC, 50/60 Hz and providing output of 5VDC at 1A. Stainless collar for semi-recessing in 4 in (102 mm) walls.
19.
Surface Mounted Automatic Roll Towel Dispenser and Waste Receptacle: Model 046921AC-9. Proximity sensing no-touch unit dispenses a pre-set length per cycle from 8 in or 9 in (205 or 230 mm) wide, 800 ft (244 m) long rolls. 14 gal (53 L) waste receptacle. Powered by internal low-voltage adapter (supplied) using 110-240VAC, 50/60 Hz and providing output of 5VDC at 1A. Stainless collar for surface mounting.
20.
Automatic Recessed Roll Towel Dispenser and Waste Receptacle: Model 046924A. Proximity sensing no-touch unit dispenses a pre-set length per cycle from 8 in or 9 in (205 or 230 mm) wide, 800 ft (244 m) long rolls. 12 gal (45.4 L) waste receptacle. Battery operated (4) D-size.
21.
Recessed Roll Towel Dispenser and Waste Receptacle: Model 046924. Dispenses a pre-set length per cycle; 8 in or 9 in (205 or 230 mm) wide, 800 ft (244 m) long rolls. 12 gal (45.4 L) receptacle. Mechanical lever dispenser. 3 pre-set dispensing lengths.
22.
Automatic Surface Mounted Roll Towel Dispenser and Waste Receptacle: Model 046924A-9. Dispenses a pre-set length per cycle from 8 in or 9 in (205 or 230 mm) wide, 800 ft (244 m) long rolls. 12 gal (45.4 L) waste receptacle. Mechanical lever dispenser. Three pre-set dispensing lengths. Stainless collar for surface mounting.
23.
Surface Mounted Automatic Roll Paper Towel Dispenser and Waste Receptacle: Model 046924AC-9. Proximity sensing no-touch unit dispenses a pre-set length per cycle from 8 in or 9 in (205 or 230 mm) wide, 800 ft (244 m) long rolls. 12 gal (45.4 L) waste receptacle. AC powered.
24.
Surface Mounted Roll Towel Dispenser and Waste Receptacle: Model 046924-9. Unit dispenses a pre-set length per cycle from 8 in or 9 in (205 or 230 mm) wide, 800 ft (244 m) long rolls. 12 gal (45.4 L) waste receptacle. Mechanical lever dispenser.
25.
Automatic Roll Paper Towel Dispenser and Waste Receptacle: Model 04692A. Proximity sensing no-touch unit dispenses a pre-set length per cycle from 8 in or 9 in (205 or 230 mm) wide, 800 ft (244 m) long rolls. Battery operated (4) D-size.
26.
Automatic Roll Paper Towel Dispenser and Waste Receptacle (Semi-recessed): Model 04692A-6. Proximity sensing no-touch unit dispenses a pre-set length per cycle from 8 in or 9 in (205 or 230 mm) wide, 800 ft (244 m) long rolls. Battery operated (4) D-size. Stainless steel collar for semi-recessing in 4 in (102 mm) walls.
27.
Automatic Roll Paper Towel Dispenser and Waste Receptacle (Surface Mount): Model 04692A-9. Proximity sensing no-touch unit dispenses a pre-set length per cycle from 8 in or 9 in (205 or 230 mm) wide, 800 ft (244 m) long rolls. Battery operated (4) D-size. Stainless steel collar for surface mounting.
28.
Automatic Roll Paper Towel Dispenser and Waste Receptacle: Model 04692AC. Proximity sensing no-touch unit dispenses a pre-set length per cycle from 8 in or 9 in (205 or 230 mm) wide, 800 ft (244 m) long rolls. Powered by AC.
29.
Automatic Roll Paper Towel Dispenser and Waste Receptacle (Semi-recessed): Model 04692AC-6. Proximity sensing no-touch unit dispenses a pre-set length per cycle from 8 in or 9 in (205 or 230 mm) wide, 800 ft (244 m) long rolls. Powered by AC. Stainless steel collar for semi-recessing in 4 in (102 mm) walls.
30.
Automatic Roll Paper Towel Dispenser and Waste Receptacle (Surface Mount): Model 04692AC-9. Proximity sensing no-touch unit dispenses a pre-set length per cycle from 8 in or 9 in (205 or 230 mm) wide, 800 ft (244 m) long rolls. Powered by AC. Stainless steel collar for surface mounting.
31.
Recessed Pull Core Towel Dispenser and Waste Receptacle: Model 04693. Dispenses one pull core paper towel roll. 16 gal (60.6 L) stainless waste receptacle.
32.
Semi-Recessed Pull Core Towel Dispenser and Waste Receptacle: Model 04693-6. Dispenses one pull core paper towel roll. 16 gal (60.6 L) stainless steel waste receptacle with stainless steel collar for semi-recessing in 4 in (102 mm) walls.
33.
Surface Mount Pull Core Towel Dispenser and Waste Receptacle: Model 04693-9. Dispenses one pull core paper towel roll. 16 gal (60.6 L) stainless steel waste receptacle with stainless steel collar for surface mounting.
34.
Recessed Paper Towel Dispenser and Waste Receptacle: Model 04697. 600 C-fold, 800 multi-fold or 1,100 single-fold paper towels. 12 gal (46 L) stainless receptacle.
35.
Recessed Paper Towel Dispenser and Waste Receptacle: Model 04697-BL. Dispenses 600 C-fold, 800 multi-fold or 1,100 single-fold paper towels. 18 gal (68 L) waste receptacle, projects 4 in (102 mm) from wall.
36.
Semi-Recessed Paper Towel Dispenser and Waste Receptacle: Model 04697-4. Dispenses 600 C-fold, 800 multi-fold or 1,100 single-fold paper towels with stainless steel collar for semi-recessing in 4 in (102 mm) walls.
37.
Surface Mount Paper Towel Dispenser and Waste Receptacle: Model 04697-9. 600 C-fold, 800 multi-fold or 1100 single-fold with stainless collar for surface mounting.
38.
Counter Top Mounted Paper Towel Dispenser/Waste Receptacle: Model 1001. Towels loaded by pushing through hinged dispensing flaps. Capacity: 1 package C-fold paper towels. Unit provided with loose waste receptacle to be placed directly below waste door on the vanity floor.
D.
Paper Towel Dispensers: Traditional Collection by ASI.
1.
Paper Towel Dispenser: Model 0210. Dispenses 400 C-fold or 525 multi-fold paper towels without adjustment or adapters. Fabricated of 22 ga stainless steel with Satin finish. Fitted with tumbler lock and heavy duty stainless steel piano hinge.
2.
Paper Towel Dispenser - Petite: Model 0215. Dispenses 200 C-fold or 275 multi-fold paper towels. Fabricated of 22 ga stainless steel with Satin finish. Fitted with tumbler lock and heavy duty stainless steel piano hinge.
3.
Paper Towel Dispenser: Model 0245-SS. Dispenses 400 single-fold paper towel. Entire unit fabricated of 22 ga stainless steel.
4.
Recessed Towel Dispenser: Model 0439. Cabinet is provided with two push-up flaps for bottom-filling of paper towels. Towel dispenser is concealed behind mirror or wall. 600 C-fold or 800 multi-fold paper towels. Only towel tray opening is visible. Leave 6 in minimum (150 mm) clearance below towel tray opening for space for pull towels. Units are installed prior to mirror hanging or before finished wall is applied.
5.
Paper Towel Dispenser: Model 0452. 600 C-fold or 800 multi-fold paper towels.
6.
Paper Towel Dispenser (Surface Mount): Model 0452-9. Dispenses 600 C-fold or 800 multi-fold paper towels with stainless steel collar for surface mounting.
7.
Recess Mounted Touchless Paper Towel Dispenser: Model 045210A. Battery-operated touchless paper towel dispenser.
8.
Touchless Paper Towel Dispenser (Semi-recessed): Model 045210A-6. Battery-operated touchless paper towel dispenser with flange for semi-recessing.
9.
Touchless Paper Towel Dispenser (Surface Mount): Model 045210A-9. Battery-operated touchless paper towel dispenser with stainless collar for surface mounting.
10.
Touchless Paper Towel Dispenser: Model 045210AC. Touchless paper towel dispenser powered by internal low-voltage adapter (supplied) using 110-240VAC, 50/60 Hz and providing output of 5VDC at 1A.
11.
Touchless Paper Towel Dispenser (Semi-recessed): Model 045210AC-6. Touchless paper towel dispenser powered by internal low-voltage adapter (supplied) using 110-240VAC, 50/60 Hz and providing output of 5VDC at 1A with flange for semi-recessing.
12.
Automatic Roll Paper Towel Dispenser: Model 045224A. Proximity sensing no-touch unit dispenses a pre-set length per cycle from 8 in or 9 in (205 or 230 mm) wide, 800 ft. (244 m) long rolls. Battery operated (4) D-size.
13.
Automatic Roll Paper Towel Dispenser (Surface Mount): Model 045224A-9. Proximity sensing no-touch unit dispenses pre-set length; 8 in or 9 in (205 or 230 mm) wide, 800 ft. (244 m) long rolls. Battery operated (4) D-size. Steel collar for surface mounting.
14.
Roll Paper Towel Dispenser: Model 045224. Dispenses a pre-set length per cycle from 8 in or 9 in (205 or 230 mm) wide, 800 ft. (244 m) long rolls. Mechanical lever dispenser. Three pre-set dispensing lengths.
15.
Roll Paper Towel Dispenser (Surface Mount): Model 045224-9. Dispenses pre-set length; 8 in or 9 in (205 or 230 mm) wide, 800 ft. (244 m) long rolls. Mechanical lever dispenser. 3 pre-set dispensing lengths. Stainless collar for surface mounting.
16.
Paper Towel Dispenser: Model 0457. For the smaller washroom with less space and traffic. Dispenses 350 C-fold or 500 multi-fold paper towels.
17.
Paper Towel Dispenser (Surface Mount): Model 0457-9. Dispenses 350 C-fold or 500 multi-fold paper towels with stainless steel collar for surface mounting.
18.
Counter Top Mounted Paper Towel Dispenser: Model 1002. Towels loaded by pushing downward through hinged dispensing flaps. 1 package C-Fold paper towels.
19.
Roll Paper Towel Dispenser: Model 8165. Heavy-duty aluminum casting with satin finish. Molded plastic spindle has concealed locking device to prevent theft of paper towels and spindle. Controlled delivery, allowing perforated paper towels to be torn from roll. Holds standard roll paper towels up to 6 in (152 mm) dia. Unit measures 13 in (330 mm) wide and projects 4-7/8 in (125 mm) from wall.
20.
Automatic Roll Paper Towel Dispenser: Model 8523A. Proximity sensing no-touch unit dispenses pre-set lengths per cycle from 8 in or 9 in (205 or 230 mm) wide, 800 ft (244 m) long rolls. Battery operated (4) D-size.
21.
Recessed Roll Paper Towel Dispenser: Model 8522. Unit dispenses pre-set lengths per cycle from 8 in or 9 in (205 or 230 mm) wide, 800 ft (244 m) long rolls. with mechanical dispenser. Three pre-set dispensing lengths.
E.
Waste Receptacles: Traditional Collection by ASI.
1.
Waste Receptacle: Model 0458; stainless, locks to cabinet, removable. 12 gal (46 L).
2.
Waste Receptacle (Surface Mount): Model 0458-9. Stainless steel waste container locks into cabinet, removable for servicing with stainless steel collar for surface mounting. 12 gal (46 L) receptacle.
3.
Waste Receptacle: Model 0458-CX. Projection Recess: 1/2 in (13 mm) 7-1/2 in (190 mm). 12 gal (46 L) receptacle.
4.
Waste Receptacle: Model 0458-DX. Projection Recess: 8 in (205 mm) 4 in (102 mm). 18 gal (68 L) receptacle.
5.
Waste Receptacle: Model 04733. Self-closing panel covers the receptacle opening, removable 3 gal (11.4 L) stainless steel waste receptacle.
6.
Free Standing Waste Receptacle: Model 0810. Fabricated of 22 ga type 304 stainless steel with satin finish. Top with self-closing doors. Vinyl wall bumpers - top and bottom, rubber feet. Hooks for liners. Capacity: 13 gal (49 L) receptacle.
7.
Free Standing Open Waste Receptacle: Model 0811. Fabricated of 22 ga type 304 stainless steel with satin finish. Vinyl wall bumpers - top and bottom, rubber feet. Hooks for liners. Without top. Capacity: 13 gal (49 L) receptacle.
8.
Free Standing Waste Receptacle: Model 0812. Fabricated of 22 ga type 304 stainless steel with satin finish. Top with self-closing doors. Vinyl wall bumpers - top and bottom, rubber feet. Hooks for liners. Capacity: 19 gal (72 L) receptacle.
9.
Free Standing Open Waste Receptacle: Model 0813. Fabricated of 22 ga type 304 stainless steel with satin finish. Vinyl wall bumpers - top and bottom, rubber feet. Hooks for liners. Without top. Capacity: 19 gal (72 L) receptacle.
10.
Waste Receptacle: Model 0825. Fabricated of 22 ga type 304 satin stainless. Top and bottom edges hemmed, interior hooks for liner. 20 gal (75.7 L) receptacle.
11.
Waste Receptacle: Model 0826. Fabricated of 22 ga type 304 satin stainless. Top and bottom edges hemmed for safety, interior hooks for liner. 12 gal (45.4L) capacity.
12.
Waste Receptacle: Model 0827. Fabricated of 22 ga type 304 stainless steel with satin finish. Top and bottom edges hemmed for safety. Capacity: 2 gal (7.6 L).
13.
Waste Receptacle: Model 0828. Fabricated of 22 ga type 304 stainless steel with satin finish. Top and bottom edges hemmed for safety. Capacity: 6.7 gal (25.4 L).
14.
Corner Waste Receptacle: Model 0829. Fabricated of 22 ga type 304 stainless steel with satin finish. Top and bottom edges hemmed for safety. Capacity: 15.5 gal (59 L)
15.
Circular Counter Top Waste Chute: Model 1000. Provides waste deposit access to receptacle (not furnished) placed directly below chute. Made of 16 ga stainless steel, rolled flange and exposed surfaces have Satin finish.
16.
Counter Top Mounted Waste Receptacle: Model 1003. Push door is self closing. A 12 in x 12 in x 12 in (305 by 305 by 365 mm) waste receptacle is furnished to be placed directly below waste door on the vanity floor.
2.6
TOILET ACCESSORIES
A.
Basic Construction Requirements:
1.
Doors: 22 ga satin stainless steel, formed hems at sight-exposed edges.
2.
Cabinets: 22 ga satin stainless, formed hems at sight-exposed edges; joints welded.
3.
Hinges: Stainless steel piano hinge, 3/16 in (4.8 mm) dia barrel, full length of cabinet; hinge leaves spot-welded to door and cabinet body.
4.
Locks: Tumbler locks, keyed alike other toilet accessories, two keys for each lock.
B.
Ashtrays: As manufactured by ASI.
1.
Ash Tray: Model 0004 Recessed Wall Urn - Provided with stainless steel flip top ashtray permanently attached to cabinet. Removable receptacle is stainless steel.
2.
Ash Tray: Model 0044-A Surface Mounted Wall Urn - Theft resistant flip tray and bezel fabricated of satin finish type 304 stainless steel. Spring pivoted to return to original position. Removable stainless steel ash receptacle behind locked door.
3.
Ash Tray: Model 8095 Surface Mounted Wall Urn - Stainless steel circular style wall ashtray for use in lobbies and corridors. Flip top ashtray 22 ga stainless steel with satin finish hinges to urn for vandal resistant installation. Heavy duty aluminum mounting bracket and receptacle. Entire unit has satin finish.
4.
Ash Tray: Model 8091 Flip-Top Ashtray - Surface mounted unit has a stainless steel pivoting rod which permits top to pivot approximately 320 deg for disposing of waste. Type 304 stainless steel with satin finish.
C.
Baby Changing Stations: As manufactured by ASI.
1.
Toddler Safety Seat shall be Model No 9020 as manufactured by American Specialties, Inc. Toddler Safety Seat shall be durable, non-porous, FDA approved high-density polyethylene. Unit shall comply with 2010 ADA Accessibility Standards. Unit shall support a static load of 50 lbs (22.7 kg). No parts of the operating mechanism shall be accessible when unit is open or closed to provide a tamper-resistant and pinch proof user environment. Unit shall have a three-point adjustable child protection safety belt and the shoulder harness straps shall be individually attachable. Mounting fasteners shall be concealed after installation using black recess plug covers (supplied). Unit shall be light grey in color and shall be recyclable at the end of usable life. Unit shall provide ANSI Z535 compliant graphics and instructions in four languages on interior back. Unit shall be warranted for five (5) years against defects in material or workmanship.
2.
Horizontal Baby Changing Station shall be Model No 9012 by American Specialties Inc. Baby Changing Station shall be horizontal format and shall protrude no more than 4 inches [102] from wall when in retracted position. Unit shall comply with 2010 ADA Accessibility Standards, CalDAG & CABO/ANSI A117.1-2003. Unit shall support a static load of 300 lbs (136.1 kg) and be tested in excess of 350 lbs. (158.8 kg) and shall be fabricated of non-porous plastic (FDA approved HDPE) tested according to ASTM G21 and ASTM G22. No metal parts shall be visible when unit is open or closed and no parts of the operating mechanism shall be accessible when unit is open or closed to provide a tamper-resistant and pinch proof user environment. Unit shall have a damped gas spring to assist user in opening and closing unit with one hand. Unit shall be provided with two integral heavy-duty bag hooks clearly marked with international-style symbols. Unit shall provide a bed-liner dispenser with concealed, self-latching lock requiring no keys, that may be easily converted to a multi-fold towel dispenser with no adapters. A view slot shall be provided to indicate low liner/towel stack condition. Unit shall not prominently display any garish graphics or brand name on exterior surfaces. Unit shall provide graphic and instructions in seven languages on interior back. Unit shall be provided with an adjustable two-part child protection safety-strap mounted with concealed fasteners on high walls of cradle. Rear strap shall be vinyl coated. Entire unit shall be assembled of completely sealed components to provide easy cleaning and no penetration zones to harbor microbes or bacteria. Unit shall provide no level surfaces when open or closed that may invite the resting or placement of cups, cans, bottles or cigarettes. Unit shall mount on standard stud wall dimensions and with proper anchoring may mount on all suitable wall constructions. Mounting fasteners shall be concealed after installation using color matched recess plug-covers supplied. Unit shall be a light grey color. Unit shall be recyclable at end of usable life to help reduce global waste. Unit shall be warranted for five years against defects in material or workmanship.
3.
Recessed Stainless Steel Baby Changing Station shall be Model No 9013 as manufactured by American Specialties, Inc. Recessed Baby Changing Station door, flange and cabinet shall be type 304 stainless steel, all welded construction. All exposed surfaces shall be polished to a satin finish. The door shall be 16 gauge (1.6) and the flange and cabinet shall be 18 gauge (1.3). The changing table shall be equipped with a rounded contoured pull handle and shall have a concealed damped gas spring to assist user in opening and closing unit with one hand. The bed liner shall be light gray, high impact plastic with a smooth finish for easy cleaning. The liner shall be shaped to cradle a child’s body and shall be equipped with an adjustable two-part child protection safety strap and cam buckle adjustable with one hand. Unit shall include two bag hooks, bed liner dispenser, and a C-fold towel and multi-fold towel dispenser which can easily be converted to a multi-fold towel dispenser that needs no adapters. Unit shall have a minimum holding capacity of 400 lbs (181.4 kg). The strength of the supporting wall and hardware must be adequate to support the rated load. Unit shall provide graphic and instructions in 4 languages. Unit shall comply with ASTM F-2285, G-21, G-22 and ANSI Z535 and shall be warranted for five years against defects in material or workmanship.
4.
Surface Mounted Stainless Steel Baby Changing Station shall be Model No 9013-9 as manufactured by American Specialties, Inc. Surface Mounted Baby Changing Station door, flange, surface mounting collar and cabinet shall be type 304 stainless steel, all welded construction. All exposed surfaces shall be polished to a satin finish. The door shall be 16 gauge (1.6) and the flange and cabinet shall be 18 gauge (1.3). The surface mounting collar shall be 22 gauge (0.8). The changing table shall be equipped with a rounded contoured pull handle and shall have a concealed damped gas spring to assist user in opening and closing unit with one hand. The bed liner shall be light gray, high impact plastic with a smooth finish for easy cleaning. The liner shall be shaped to cradle a child’s body and shall be equipped with a child protection safety strap and cam buckle adjustable with one hand. Unit shall include two bag hooks, a bed liner dispenser, and a C-fold towel and multi-fold towel dispenser that needs no adapters. Unit shall have a minimum holding capacity of 400 lbs (181.4 kg). The strength of the supporting wall and hardware must be adequate to support the rated load. Unit shall provide graphic safety instructions in 4 languages. Unit shall comply with ASTM F-2285, G-21, G-22 and ANSI Z535 and shall be warranted for five years against defects in material or workmanship.
5.
Surface Mounted Horizontal Baby Changing Station shall be Model No 9014 as manufactured by American Specialties, Inc. Changing Station shall be horizontal format and shall protrude no more than 4 inches (102) from wall when in retracted position. Unit shall comply with 2010 ADA Accessibility Standards, ASTM F2285-04, and EN 12221-1. Unit shall support a static load of 300 lbs (136.1 kg) and be tested in excess of 350 lbs (158.8 kg). Unit shall be fabricated of non-porous plastic (FDA approved HDPE) tested according to ASTM G21 and ASTM G22. No parts of the operating mechanism shall be accessible when unit is open or closed to provide a tamper resistant and pinch proof user environment. Unit shall have a damped gas spring to assist user in opening and closing bed tray with the use of one hand. Unit shall be provided with one integral heavy-duty bag hook. Unit shall provide a bed-liner dispenser that may be easily converted to a multi-fold towel dispenser with no adapters. Unit shall provide graphics and instructions in four languages on interior back. Unit shall be provided with an adjustable two-part vinyl coated child protection safety-strap mounted with concealed fasteners on high walls of cradle. Entire unit shall be assembled of completely sealed components to provide easy cleaning and no penetration zones to harbor microbes or bacteria. Unit shall mount on standard stud wall dimensions and with proper anchoring may mount on all suitable wall constructions. Mounting fasteners shall be concealed after installation using color matched recess plug-covers supplied. Unit shall be light grey in color and shall be recyclable at end of usable life. Unit shall be warranted for five years against defects in material or workmanship.
6.
Surface Mounted Vertical Baby Changing Station shall be Model No 9015 as manufactured by American Specialties, Inc. Changing Station shall be vertical format and shall protrude no more than 4 inches (102) from wall when in retracted position. Unit shall comply with ASTM F2285-04 and EN 12221-1. Unit shall support a static load of 300 lbs (136.1 kg) and be tested in excess of 350 lbs (158.8 kg). Unit shall be fabricated of non-porous plastic (FDA approved HDPE) tested according to ASTM G21 and ASTM G22. No parts of the operating mechanism shall be accessible when unit is open or closed to provide a tamper-resistant and pinch proof user environment. Unit shall have a damped gas spring to assist user in opening and closing bed tray with the use of one hand. Unit shall be provided with one integral heavy-duty bag hook. Unit shall provide a bed-liner dispenser that may be easily converted to a multi-fold towel dispenser with no adapters. Unit shall provide graphics and instructions in four languages on interior back. Unit shall be provided with an adjustable two-part vinyl coated child protection safety-strap mounted with concealed fasteners on high walls of cradle. Entire unit shall be assembled of completely sealed components to provide easy cleaning and no penetration zones to harbor microbes or bacteria. Unit shall mount on standard stud wall dimensions and with proper anchoring may mount on all suitable wall constructions. Mounting fasteners shall be concealed after installation using color matched recess plug-covers supplied. Unit shall be light grey in color and shall be recyclable at end of usable life. Unit shall be warranted for five (5) years against defects in material or workmanship.
7.
Recess Mounted Stainless Steel Vertical Baby Changing Station shall be Model No 9017 as manufactured by American Specialties, Inc. Baby Changing Station shall be vertical format and shall protrude no more than 3/8 inch (10 mm) from wall when in retracted position. Unit shall comply with ASTM F2285-04 and EN 12221-1. Unit shall support a static load of 110 lbs (50 kg) and be tested in excess of 150 lbs (68 kg). Unit shall be fabricated of non-porous plastic (FDA approved HDPE) tested according to ASTM G21 and ASTM G22. Unit shall contain a door facing and wall flange dress trim of satin finished 18 gauge type 304 stainless steel. No parts of the operating mechanism shall be accessible when unit is open or closed to provide a tamper-resistant and pinch proof user environment. Unit shall have a damped gas spring to assist user in opening and closing bed tray with the use of one hand. Unit shall be provided with one integral heavy-duty bag hook. Unit shall provide a bed-liner dispenser that may be easily converted to a multi-fold towel dispenser with no adapters. Unit shall provide graphics and instructions in four languages on interior back. Unit shall be provided with an adjustable two-part vinyl coated child protection safety-strap mounted with concealed fasteners on high walls of cradle. Entire unit shall be assembled of completely sealed components to provide easy cleaning and no penetration zones to harbor microbes or bacteria. Unit shall mount on standard stud wall dimensions and with proper anchoring may mount on all suitable wall constructions. Mounting fasteners shall be concealed after installation using color matched recess plug-covers supplied. Unit bed tray and back shall be light grey in color and entire unit shall be recyclable at end of usable life. Unit shall be warranted for five (5) years against defects in material or workmanship.
8.
Surface Mounted Stainless Steel Vertical Baby Changing Station shall be Model No 9017-9 as manufactured by American Specialties, Inc. Baby Changing Station shall be vertical format and shall protrude no more than 4 inches (102 mm) from wall when in retracted position. Unit shall comply with ASTM F2285-04 and EN 12221-1. Unit shall support a static load of 300 lbs (136.1 kg) and be tested in excess of 350 lbs (158.8 kg). Unit shall be fabricated of non-porous plastic (FDA approved HDPE) tested according to ASTM G21 and ASTM G22. Unit shall contain a door facing and wall flange dress trim of satin finished 18 gauge type 304 stainless steel. Unit shall contain a surface mounting collar made from satin finished 22 gauge type 304 stainless steel. No parts of the operating mechanism shall be accessible when unit is open or closed to provide a tamper-resistant and pinch proof user environment. Unit shall have a damped gas spring to assist user in opening and closing bed tray with the use of one hand. Unit shall be provided with one integral heavy-duty bag hook. Unit shall provide a bed-liner dispenser that may be easily converted to a multi-fold towel dispenser with no adapters. Unit shall provide graphics and instructions in four languages on interior back. Unit shall be provided with an adjustable two-part vinyl coated child protection safety strap mounted with concealed fasteners on high walls of cradle. Entire unit shall be assembled of completely sealed components to provide easy cleaning and no penetration zones to harbor microbes or bacteria. Unit shall mount on standard stud wall dimensions and with proper anchoring may mount on all suitable wall constructions. Mounting fasteners shall be concealed after installation using color matched recess plug-covers supplied. Unit bed tray and back shall be light grey in color and entire unit shall be recyclable at end of usable life. Unit shall be warranted for five years against defects in material or workmanship.
9.
Recess Mounted Stainless Steel Horizontal Baby Changing Station shall be Model No 9018 as manufactured by American Specialties, Inc. Baby Changing Station shall be horizontal format and shall protrude no more than 3/8 inch (10 mm) from wall when in retracted position. Unit shall comply with ASTM F2285-04 and EN 12221-1. Unit shall support a static load of 300 lbs (136.1 kg) and be tested in excess of 350 lbs (158.8 kg). Unit shall be fabricated of non-porous plastic (FDA approved HDPE) tested according to ASTM G21 and ASTM G22. Unit shall contain a door facing and wall flange dress trim of satin finished 18 gauge type 304 stainless steel. No parts of the operating mechanism shall be accessible when unit is open or closed to provide a tamper-resistant and pinch proof user environment. Unit shall have a damped gas spring to assist user in opening and closing bed tray with the use of one hand. Unit shall be provided with one integral heavy-duty bag hook. Unit shall provide a bed-liner dispenser that may be easily converted to a multi-fold towel dispenser with no adapters. Unit shall provide graphics and instructions in four languages on interior back. Unit shall be provided with an adjustable two-part vinyl coated child protection safety-strap mounted with concealed fasteners on high walls of cradle. Entire unit shall be assembled of completely sealed components to provide easy cleaning and no penetration zones to harbor microbes or bacteria. Unit shall mount on standard stud wall dimensions and with proper anchoring may mount on all suitable wall constructions. Mounting fasteners shall be concealed after installation using color matched recess plug-covers supplied. Unit bed tray and back shall be light grey in color and entire unit shall be recyclable at end of usable life. Unit shall be warranted for five (5) years against defects in material or workmanship.
10.
Surface Mounted Stainless Steel Horizontal Baby Changing Station shall be Model No 9018-9 as manufactured by American Specialties, Inc. Baby Changing Station shall be horizontal format and shall protrude no more than 4 inches (102 mm) from wall when in retracted position. Unit shall comply with 2010 ADA Accessibility Standards, ASTM F2285-04, and EN 12221-1. Unit shall support a static load of 300 lbs. (136.1 kg) and be tested in excess of 350 lbs. (158.8 kg). Unit shall be fabricated of non-porous plastic (FDA approved HDPE) tested according to ASTM G21 and ASTM G22. Unit shall contain a door facing and wall flange dress trim of satin finished 18 gauge type 304 stainless steel. Unit shall contain a surface mounting collar made from satin finished 22 gauge type 304 stainless steel. No parts of the operating mechanism shall be accessible when unit is open or closed to provide a tamper-resistant and pinch proof user environment. Unit shall have a damped gas spring to assist user in opening and closing bed tray with the use of one hand. Unit shall be provided with one integral heavy-duty bag hook. Unit shall provide a bed-liner dispenser that may be easily converted to a multi-fold towel dispenser with no adapters. Unit shall provide graphics and instructions in four languages on interior back. Unit shall be provided with an adjustable two-part vinyl coated child protection safety-strap mounted with concealed fasteners on high walls of cradle. Entire unit shall be assembled of completely sealed components to provide easy cleaning and no penetration zones to harbor microbes or bacteria. Unit shall mount on standard stud wall dimensions and with proper anchoring may mount on all suitable wall constructions. Mounting fasteners shall be concealed after installation using color matched recess plug-covers supplied. Unit bed tray and back shall be light grey in color and entire unit shall be recyclable at end of usable life. Unit shall be warranted for five (5) years against defects in material or workmanship.
D.
Bottle Openers: As manufactured by ASI.
1.
Bottle Opener: Model 0711 - One piece, 16 ga type 304 stainless steel. Projects 1-1/16 in (27 mm) from wall, 2 in (52 mm) wide by 2-1/4 in (55 mm) high. Satin finish.
2.
Bottle Opener: Model 0711-B. One piece, 16 ga type 304 stainless steel. Projects 1-1/16 in (27 mm) from wall, 2 in (52 mm) wide by 2-1/4 in (55 mm) high. Bright finish.
E.
Clothes Hooks, Towel Hooks, Clothes Lines and Shelves: As manufactured by ASI.
1.
Surface Mounted Retractable Clothes Line: Model 0712. Polished stainless steel unit has spring actuated 6 ft (1829 mm) vinyl cord with white vinyl knob and locking nut to hold stretched line taught.
2.
Clothes Hook - Front Mounting: Model 120. Bracket 11 ga, hook 7 ga type 304 stainless steel with satin finish. If hook is excessively loaded, it will snap down for safety. Unit has four holes through flange for front mounting.
3.
Clothes Hook - Front Mounting: Model 121. Bracket 11 ga, hook 7 ga type 304 stainless steel with satin finish. If hook is excessively loaded, it will snap down for safety. Unit has four studs for rear mounting.
4.
Square Clothes Hook - Rear Mounting: Model 122. Constructed of 12 ga stainless steel type 304L with a Satin finish. 14 ga stainless back plate. If hook is excessively loaded, it snaps down for safety. Four studs welded on back for rear mounting.
5.
Square Clothes Hook - Rear Mounting: Model 123. Constructed of 12 ga satin stainless steel type 304L. 14 ga stainless back plate. If hook is excessively loaded, it will snap down for safety. Unit has four holes through flange for front mounting.
6.
Clothes/Towel Hook Strip - Front Mounting: Model 127. Clothes/Towel Hook Strip - Front Mounting - Wall plate 14 ga with beveled edges, 11 ga brackets, and four, 7 ga hooks. Stainless steel type 304 with satin finish. Hooks snap down for safety if excessively loaded. Unit has 6 mounting holes through back for front mounting.
7.
Book Shelf/Clothes Hook - Front Mounting: Model 128-1. Shelf and back plate are 14 ga stainless steel type 304 with satin finish. Hooks are 12 ga stainless steel and back plate is 14 ga stainless steel. Seams are welded and ground smooth. Hooks snap down for safety if excessively loaded. 6 holes through back for front mounting.
8.
Clothes/Towel Hook Strip - Front Mounting: Model 129. Fabricated of 12 ga stainless steel type 304 with satin finish. Back plate of 14 ga stainless steel. Hooks snap down for safety if excessively loaded. Six holes through back for front mounting.
9.
Recessed Shelf - Rear Mounting: Model 130 - 16 ga type 304 stainless steel, corners welded and ground smooth. 1 in (25 mm) wide beveled satin finish trim. Interior glass blasted finish. Unit has four studs welded on back for rear mounting.
10.
Book Shelf/Clothes Hook Strip - Front Mounting: Model 137. Front Mounting - Book shelf and back plate are fabricated of 14 ga stainless steel type 304 with satin finish. Hooks are 7 ga and brackets are 11 ga stainless steel. Hooks snap down for safety if excessively loaded. Unit has 6 holes through back for front mounting.
F.
Combination Units: As manufactured by ASI.
1.
Dual Access Seat Cover And Toilet Tissue Dispenser With Sanitary Disposal: Model 0481. Mounts through partition usable by both sides but serviced from one side. Holds 1000 seat covers and 4 rolls of toilet tissue.
2.
Dual Access Seat Cover And Toilet Tissue Dispenser With Sanitary Disposal: Model 0481-HC. Mounts through partition usable by both sides but serviced from one side. Mounts flush on barrier-free compartment side to allow grab bar clearance. Holds 1000 seat covers and 4 rolls of toilet tissue.
3.
Dual Access Seat Cover And Toilet Tissue Dispenser With Sanitary Disposal: Model 0482, for end wall installation. Holds 1000 seat covers and 2 rolls of toilet tissue.
4.
Dual Access Seat Cover And Toilet Tissue Dispenser With Sanitary Disposal: Model 0483. for end wall installation. Holds 1000 seat covers and 2 rolls of toilet tissue, with stainless steel collar for surface mounting.
5.
Dual Access Toilet Tissue Dispenser With Napkin Disposal: Model 04813. Mounts through partition, usable by both sides, serviced from one side. 4 rolls of toilet tissue.
6.
Dual Access Toilet Tissue Dispenser W/Napkin Disposal: Model 04813-HC. 4 rolls of tissue, one side mounts flush on barrier-free compartment, allows grab bar clearance.
7.
Dual Access Toilet Tissue Dispenser With Napkin Disposal: Model 04823; for end stall installation. Holds 2 rolls of toilet tissue.
8.
Dual Access Toilet Tissue Dispenser With Napkin Disposal: Model 04833. for end stall installation, but with stainless steel collar for surface mounting.
9.
Dual Access Seat Cover And Toilet Tissue Dispenser: Model 0484-HC. One side mounts flush to partition of barrier-free side to allow for grab bar. Usable from both sides but serviced from one side. Holds 1000 seat covers and 4 rolls of toilet tissue.
10.
Dual Access Seat Cover And Toilet Tissue Dispenser: Model 0484; 1 side flush to partition of barrier-free side allows for grab bar. Usable from both sides, serviced from one side, mounts centered through partition. 1000 seat covers, 4 rolls of tissue.
11.
Partition Mounted Dual Access Seat Cover And Toilet Paper Dispenser: Model 0484-R; Seat covers are self-feeding until supply is depleted. Toilet paper rolls feed freely until depleted and level of supply is constantly visible. Toilet paper rolls and paper seat covers are serviced from one side, for both stalls, by unlocking and opening door. Locked door prevents unauthorized removal. Toilet paper spindles are carried in vandal resistant sub-frame accessible when door is opened. Barrier baffle panels preserve privacy between stalls at all times.. 1000 seat covers, 4 rolls of tissue.
12.
Dual Access Seat Cover And Toilet Tissue Dispenser: Model 0485; for end stall installation. Holds 1000 seat covers and 2 rolls of toilet tissue.
13.
Dual Access Seat Cover And Toilet Tissue Dispenser: Model 0486; for end stall installation, with stainless steel collar for surface mounting.
G.
Cup Dispensers: As manufactured by ASI.
1.
Surface Mounted Stainless Steel Paper Cup Dispenser: Model 0002-ASM. 100 flat bottom cups. Adjustable for 3 oz thru 6 oz cups. Stainless steel with bright finish.
2.
Stainless Steel Surface Mounted Paper Cup Dispenser: Model 0002-SM. Dispenses 100 flat bottom cups. Square design with swing down door, type 304 stainless steel, satin finish. Dispenses 3 oz cups only.
H.
Custodial Accessories: As manufactured by ASI.
1.
Mop Holder: Model 0795. Fabricated of cadmium plated steel and ribbed for rigidity. Pivoting spring loaded serrated rubber cam holds round handles of 7/8 in to 1-1/4 in dia (22 to 32 mm) wedged against ribbed clamp plate.
2.
Mop Holder Rack: Model 0796. Fabricated of one-piece channel alloy 18-8 stainless steel, type 304, 20 ga with satin finish.
a.
Model 0796-3, 26 in (660 mm) with 3 holders.
b.
Model 0796-4, 36 in (914 mm) with 4 holders.
3.
Utility Strap Hook Strip: Model 1307: Type 304 stainless steel with satin finish. Strip is 4 in (102 mm) high with edges returning 1/2 in (13 mm) to the wall.
 
** NOTE TO SPECIFIER ** Delete models not required
 
a.
Model 1307-3 - Utility Hook Strip - 26 in (660 mm) with 3 hooks.
b.
Model 1307-4 - Utility Hook Strip - 36 in (915 mm) with 4 hooks.
c.
Model 1307-5 - Utility Hook Strip - 46 in (1170 mm) with 5 hooks.
d.
Model 1307-6 - Utility Hook Strip - 56 in (1420 mm) with 6 hooks.
4.
Shelf with Utility Hooks and Mop Strip: Constructed of type 304 satin finish stainless steel. Shelf is 8 in (200 mm) deep with 3/4 in (19 mm) return for rigidity. Mop holders are riveted to strip and rubber cam is ribbed for grasping. 14-1/2 in (370 mm) high.
 
** NOTE TO SPECIFIER ** Delete models not required.
 
a.
Model 1308-3: 3 mop holders/4 utility hooks 34 in (860 mm) long.
b.
Model 1308-4: 4 mop holders/5 utility hooks, 44 in (1120 mm) long.
5.
Utility Shelf with Mop Holders and Rag Hooks: Type 304 satin stainless. Shelf is 8 in (200 mm) deep with 3/4 in (19 mm) return for rigidity. Mop holders are riveted to strip and rubber cam is ribbed for grasping. Rod and hooks for wet rags included.
 
** NOTE TO SPECIFIER ** Delete models not required.
 
a.
Model 1315-3: 3 mop holders/2 rag hooks, 30 in (760 mm) long.
b.
Model 1315-4: 4 mop holders/3 rag hooks, 36 in (915 mm) long.
c.
Model 1315-6: 6 mop holders/5 rag hooks, 48 in (1220 mm) long.
6.
Mop and Broom Racks: Formed channel fabricated of 20 ga, type 304 satin stainless. Projects 3-1/2 in (90 mm) from wall. Rubber cam holders ribbed for grasping.
 
** NOTE TO SPECIFIER ** Delete models not required.
 
a.
Model 8215-3 - 3 holders, 26 in (660 mm) long.
b.
Model 8215-4 - 4 holders, 36 in (915 mm) long.
c.
Model 8215-5 - 5 holders, 46 in (1170 mm) long.
I.
Facial Tissue Dispensers: As manufactured by ASI.
1.
Surface Mounted Facial Tissue Dispenser: Model 0258-SS. Cabinet type 304 stainless steel, satin finish. Dispenses 300 single or 150 two-ply sheets.
2.
Recessed Facial Tissue Dispenser: Model 0259-B (Bright polished faceplate). Dispenses 300 single ply or 150 double-ply tissue. Faceplate type 304 satin stainless.
3.
Recessed Facial Tissue Dispenser: Model 02594-B (Bright polished faceplate). Capacity 600 single sheet or 300 two ply sheets.
4.
Recessed Facial Tissue Dispenser: Model 02594-SS. Capacity 600 single sheet or 300 two ply sheets. Faceplate type 304 stainless steel satin finish.
5.
Recessed Facial Tissue Dispenser: Model 0259-SS. Dispenses 300 single ply or 150 double-ply tissue. Faceplate type 304 stainless steel satin finish.
J.
Feminine Hygiene Disposals: As manufactured by ASI.
1.
Partition Mounted Dual Access Napkin Disposal: Model 0472. Serves two compartments mounted in partitions. Receptacle removable from one side for servicing and locks to back of cabinet by means of stainless steel clips. Self-closing doors on each side are mounted to cabinet with heavy duty full length piano hinge.
2.
Partition Mounted Dual Access Napkin Disposal: Model 0472-1. Serves two compartments mounted in partitions. Receptacle removable from 1 side for servicing and locks to back of cabinet with stainless clips. Self-closing doors on each side mounted to cabinet with heavy duty full length piano hinge, tumbler locks for servicing.
3.
Recessed Sanitary Napkin Disposal: Model 0473. Serves two compartments mounted in partitions. Receptacle removable from 1 side for servicing and locks to back of cabinet with stainless clips. Self-closing doors on each side mounted to cabinet with heavy duty full length piano hinge, recessed for side wall installation.
4.
Recessed Sanitary Napkin Disposal: Model 0473-1. Serves two compartments mounted in partitions. Receptacle removable from 1 side for servicing and locks to back of cabinet with stainless clips. Self-closing doors on each side mounted to cabinet with heavy duty full length piano hinge, tumbler lock for servicing.
5.
End Stall Sanitary Disposal Surface Mounted: Model 0473-A. Serves two compartments mounted in partitions. Receptacle removable from 1 side for servicing, locks to back of cabinet with stainless clips. Self-closing doors on each side mounted to cabinet w/heavy duty full length piano hinge, surface mounted.
6.
End Stall Sanitary Disposal Surface Mounted: Model 0473-1A. Serves two compartments mounted in partitions. Receptacle removable from 1 side for servicing, locks to back of cabinet with stainless clips. Self-closing doors on each side mounted to cabinet w/heavy duty full length piano hinge, tumbler lock for servicing.
7.
0852 - Surface Mounted Sanitary Napkin Disposal: Model 0852. Sloping cover has full length piano hinge.
8.
Surface Mounted Sanitary Napkin Disposal: Model 0852-SH. Sloping cover has full length piano hinge with 16 ga utility shelf.
K.
Feminine Hygiene Vendors: As manufactured by ASI.
1.
Recessed Sanitary Napkin/Tampon Vendor: Model 0464. Dispenser includes 2 dispensing mechanisms, one for 27 tampons, the other for 30 feminine napkins. Furnished with adjustable flange for recessing in wall depths 1 in - 6 in (25 - 152 mm).
2.
Recessed Sanitary Napkin/Tampon Vendor: Model 0864. Dispenser includes 2 dispensing mechanisms, one for 27 tampons, the other for 30 feminine napkins.
3.
Recessed Sanitary Napkin/Tampon Vendor: Model 0468. 30 napkins, 27 tampons.
4.
Recessed Sanitary Napkin/Tampon Vendor: Model 0468-2. 30 napkins, 27 tampons; with stainless steel collar for semi-recessing in 4 in (102 mm) walls.
5.
Recessed Dual Napkin/Tampon Dispenser: Model 04684. 30 napkins, 27 tampons; designed for 4 in (102 mm) wall. Dispenses 15 napkins, 23 tampons.
6.
Recessed Sanitary Napkin/Tampon Vendor With Disposal: Model 04684-TM. Has 2 dispensing mechanisms and removable disposal with self-closing door which can be emptied without opening dispenser unit. Dispenses 15 napkins, 23 tampons.
7.
Recessed Sanitary Napkin/Tampon Vendor With Disposal: Model 04684-TM-9. 2 dispensing mechanisms, removable disposal w/self-closing door for emptying w/out opening unit. 15 napkins, 23 tampons, w/surface mounted stainless collar.
L.
Healthcare Accessories: As manufactured by ASI.
1.
Turntable Specimen Pass Cabinet Model 0515.
a.
Turntable Cylinder Assembly: 18 ga satin stainless, 12 in (305 mm) dia, with 10-1/2 by 6 in (267 mm x 152 mm) opening; removable cylinder housing w/lock.
b.
Cabinet Trim: 22 ga stainless steel, 1 in (25 mm) flange with 1/4 in (6 mm) returns, four sides; joints welded, sight-exposed welds finished to match sheet finish; adjustable for wall thickness 3 to 7 in (76 mm to 178 mm).
c.
Main Body: Self-lubricating ball bearing plate mounted on top and bottom permitting free rotation; positioned bullet catch prevents uncontrolled rotation.
2.
Corner Guards: Model 0533-48. 18 ga type 304 satin stainless with 1/8 in radius. Adhesive mounted. Size: 48 in high by 4-1/4 in x 4-1/4 in (1220 by 110 by 110 mm).
3.
Recessed Bedpan and Urinal Cabinet: Model 0551.
a.
Door: 22 ga stainless steel, with 1/4 in (6 mm) returns; Satin finish.
b.
Airspace: 1/2 in (13 mm), continuous, above and below door.
c.
Cabinet: 22 ga stainless, 1 in (25 mm) flange with 1/4 in (6 mm) return to wall, four sides; joints welded, sight-exposed welds finished to match sheet finish.
d.
Hinges: Stainless steel piano hinge, 3/16 in (4.8 mm) dia barrel, full length of cabinet; hinge leaves spot-welded to door and cabinet body.
4.
Recessed Bed Pan and Washbasin Cabinet: Model 0558-1. Type 304 satin stainless.
5.
Surface Mounted Bed Pan and Urinal Rack: Model 0556: 12 in W x 27 in H (300 by 685 mm), for storing 1 bed pan and 1 urinal bottle. Type 304 satin stainless.
6.
Surface Mounted Bed Pan Rack: Model 0557. 12 in W x 11 in H (300 by 280 mm). Type 304 satin stainless steel.
7.
Surface Mounted Double Bed Pan Rack: Model 0559. Type 304 satin stainless steel.
8.
Recessed Stainless Steel Medicine Cabinet: Model 0952. Swing door mirror frame is type 304 stainless steel with Satin finish. Mirror is 1/4 in (6 mm). Door has full length piano hinge and magnetic catch. Three removable stainless steel shelves.
 
** NOTE TO SPECIFIER ** Recessed Stainless Steel Medicine Cabinet - Similar to 0952, except larger.
 
9.
Recessed Stainless Steel Medicine Cabinet: Model 0952B. Swing door mirror frame is type 304 stainless steel with Satin finish. Mirror is 1/4 in (6 mm). Door has full length piano hinge and magnetic catch. Three removable stainless steel shelves.
10.
Recessed White Painted Steel Medicine Cabinet With Color Insert Face Swing Door: Model 0952-MLB. Swing door mirror frame is plastic laminate with inert backing. Mirror is 1/4 in (6 mm). Door has full length piano hinge and magnetic catch. Three removable stainless steel shelves.
11.
Surface Mounted Stainless Steel Medicine Cabinet: Model 0953. Swing door mirror frame is type 304 stainless steel with Satin finish. Mirror is 1/4 in (6 mm). Door has full length piano hinge and magnetic catch. Three removable stainless steel shelves.
12.
Pass Through Specimen Cabinet: Model 8154.
a.
Self-closing Doors: 22 ga stainless steel, Satin finish; interlock on doors prevents both doors from being opened at the same time.
b.
Cabinet: 22 ga stainless steel, 1 in (25 mm) flange with 1/4 in (6 mm) return to wall, four sides; joints welded, sight-exposed welds finished to match sheet finish; adjustable for wall thickness 1-3/4 to 5-1/2 in (44 mm to 140 mm).
c.
Hinges: Stainless steel piano hinge, 3/16 in dia barrel, full length of cabinet; hinge leaves spot-welded to door and cabinet body.
d.
Removable Tray: 22 ga stainless steel.
13.
Recessed Medicine Cabinet With Mirror Swing-Door: Model 8337 - One-piece, drawn cold rolled steel with a neutral-toned baked enamel finish. Stainless steel framed mirrored door 1/4 in (6 mm) thick quality plate glass is hung on a continuous piano hinge, painted to match cabinet, and held closed by a magnetic catch. Cabinet is provided with 3 adjustable white baked enamel steel shelves.
 
** NOTE TO SPECIFIER ** Model 8338 - Surface Mounted Cabinet - Similar to 8337, but smaller and provided with 2 adjustable white baked enamel steel shelves.
 
14.
Surface Mounted Medicine Cabinet With Mirror Swing-Door: Model 8338 - One-piece, drawn cold rolled steel with a neutral-toned baked enamel finish. Stainless steel framed mirrored door 1/4 in (6 mm) thick quality plate glass is hung on a continuous piano hinge, painted to match cabinet, and held closed by a magnetic catch. Cabinet is provided with 2 adjustable white baked enamel steel shelves.
 
** NOTE TO SPECIFIER ** Model 8339 - Surface Mounted Cabinet - Similar to 8338, except larger.
 
15.
Surface Mounted Medicine Cabinet With Mirror Swing-Door: Model 8339 - One-piece, drawn cold rolled steel with a neutral-toned baked enamel finish. Stainless steel framed mirrored door 1/4 in (6 mm) thick quality plate glass is hung on a continuous piano hinge, painted to match cabinet, and held closed by a magnetic catch. Cabinet is provided with 2 adjustable white baked enamel steel shelves.
16.
Baked Enamel Recessed Medicine Cabinet: Model 8340. One piece, drawn cold rolled steel with white baked enamel finish. Stainless steel channel framed mirrored door with 1/4 in (6 mm) thick plate glass, has continuous piano hinge and magnetic catch. Three removable white enamel steel shelves.
M.
Hooks and Bumpers: As manufactured by ASI.
1.
Coat Hook/Door Bumper: Model 0714. Chrome-plated flange, 3 in (75 mm) projection. Rubber bumper.
2.
Door Bumper: Model 0719. Chrome-plated 2-3/16 in (55 mm) dia flange. Projects 1-7/8 in (50 mm).
3.
Single Robe Hook: Model 0740-Z.
4.
Zamac Bathroom Accessories - Single Robe Hook: Model 0740-ZA.
5.
Double Robe Hook: Model 0745-Z.
6.
Zamac Bathroom Accessories - Double Robe Hook: Model 0745-ZA.
7.
Heavy Duty Robe Hook: Model 0751. Concealed mounting satin chrome-plated brass, 3-1/4 in (80 mm) projection.
8.
Heavy Duty Robe Hook: Model 0751-A. Exposed mounting satin chrome-plated brass, 3-1/4 in (80 mm) projection.
9.
Heavy Duty Utility Strap Hook: Model 1306. Heavy duty 11 ga satin stainless steel.
10.
Single Robe Hook: Model 7340. Hook extends 1-5/8 in (40 mm) from wall.
11.
Double Robe Hook: Model 7345. 4 in (100 mm) wide stainless steel bar forms hook at each end. Unit extends 1-5/8 in (40 mm) from wall.
12.
Single Robe Hook: Model 7740.
13.
Hat and Coat Hook: Model 7382. Double hook for both coats and hats. 5-1/4 in H x 3 in (135 mm H x 75 mm) projection.
14.
Clothes Hook: Model 8425. Heavy Duty No. 11 ga type 304 stainless steel with satin finish. Hook projects 1-1/4 in (32 mm) from wall and is 2-1/4 in (55 mm) high.
 
** NOTE TO SPECIFIER ** Sizes need to be defined on schedule or interior elevation.
 
N.
Mirrors: As manufactured by ASI.
1.
Tilt Mirror: Model 0535. Offers visibility for wheelchair patients. Frame: 20 ga satin stainless. Tapered from 4 in (102 mm) at top to 1 in (25 mm) at bottom. Size as scheduled or indicated on Drawings.
2.
Tilt Mirror with Shelf: Model 0537. Offers visibility for wheelchair patients. Frame: 20 ga satin stainless steel. Tapered from 4 in (102 mm) at top to 1 in (25 mm) at bottom. Shelf: 6 in (152 mm) deep from wall. Size as scheduled or indicated on Drawings.
3.
Angle Frame Mirror: Model 0600. 3/4 in x 5/8 in (19 mm x 16 mm) roll formed 18 ga type 304 satin stainless angle with corners heliarc welded. Mirror is installed on concealed hanging bracket that locks onto top and bottom of frame by tamper-proof set screws. One-piece back plate, attached to frame w/ theft resistant locking device.
4.
Adjustable Tilt Mirror: Model 600T. Designed to provide easy visibility for wheelchair patients or return to upright position. Angle frame fabricated of 18 ga stainless steel with corners welded and ground smooth. Tilts a full 6 in (152 mm) with bottom mounted on full width stainless steel piano hinge.
5.
Stainless Steel Angle Frame Mirror with Shelf: Model 0605.
a.
3/4 in x 5/8 in (19 mm x 16 mm) roll formed 18 ga type 304 satin stainless steel angle, corners heliarc welded. Mirror is installed on concealed hanging bracket that locks onto top and bottom of frame by tamper-proof set screws. Back plate is one piece, attached to frame with theft resistant locking device.
b.
Shelf of 18 ga satin stainless and edges returned and hemmed for maximum rigidity and safety. Shelf is welded to face frame and is 5 in (127 mm) wide.
6.
Channel Frame Mirror: Model 620. 1/2 in x 1/2 in x 1/2 in (13 mm x 13 mm x 13 mm) 20 ga type 304 satin stainless channel, one piece roll formed member; installed on two wall brackets, held secure by theft resistant screw.
7.
Stainless Steel Channel Frame Mirror with Shelf: Model 625. 1/2 in x 1/2 in x 1/2 in (13 mm x 13 mm x 13 mm) 20 ga type 304 satin stainless channel, one piece roll formed member. Installed on two wall brackets and held secure by theft resistant screw. Shelf of 18 ga satin stainless and edges returned and hemmed for maximum rigidity and safety. Shelf is welded to face frame, 5 in (127 mm) wide.
8.
Frameless Stainless Steel Mirror: Model 8026. Fabricated of 20 ga type 304 stainless with No. 8 polish finish with a 1/4 in (6 mm) return. Provided with 1/4 in (6 mm) thick concealed tempered Masonite backing and 4 mounting holes. Installer shall provide mounting screws to suit field conditions. Size as scheduled or indicated on Drawings.
9.
Frameless Mirror: Model 8287. Frameless mirrors offer clean lines to complement every type of interior design and are easy to care for. One piece can be up to 28 sf (2.6 m2), as long as either H or W dimension is less than 84 in (2134 mm). Mirrors larger than 28 sf (2.6 m2) or with either linear H or W dimension larger than 84 in (2134 mm) supplied as multiple pieces. Made of 1/4 in (6 mm) polished plate glass.
O.
Security Accessories: As manufactured by ASI.
1.
Security/Detention Framed Mirror - Rear Mounting: Model 101.
a.
Frame 14 ga type 304 stainless steel with satin finish, corners welded and ground smooth. Unit provided with fiberboard backing and 6 "T" nuts welded on back for rear mounting. 12 in x 16 in x 5/8 in (305 mm x 405 mm x 16 mm).
 
** NOTE TO SPECIFIER ** Delete mirror surface not required.
 
b.
No. 14: 20 ga type 304 stainless steel No. 8 mirror polish.
c.
No. 30: 20 ga type 430 stainless steel bright annealed.
d.
No. 31: 22 ga steel chrome plated.
e.
No. 13: 1/4 in (6 mm) thick tempered glass polished mirror.
f.
No. 17: 1/4 in (6 mm) thick Plexiglas polished mirror.
2.
Security/Detention Framed Mirror-Front Mounting: Model 104. Unit consists of wall mounting plate fabricated of 7 ga type 304 stainless steel with 4 countersunk mounting holes and 8 tapped holes. Formed mirror fabricated of 18 ga type 304 stainless steel with No. 8 mirror polish finish provided with 8 dimpled holes through integral frame and 1/4 - 20 x 1/4 in TORX head screws for securing to wall mounting plate. 10-1/16 in x 11 9/16 in x 7/16 in (255 mm x 290 mm x 11 mm).
3.
Security/Detention Framed Mirror-Front Mounting: Model 105. Frame 14 ga type 304 satin stainless, corners welded, ground smooth. Vandal resistant torx1/4 - 20 x 2 in (150 mm) machine screws. 12 in x 16 in x 5/8 in (305 mm x 405 mm x 16 mm).
4.
Security/Detention One Piece Framed Mirror with Rounded Corners - Front Mounting: Model 107. 18 ga type 304 stainless steel formed mirror with No. 8 polish, integral frame, rounded corners. Size: 12 in x 16 in x 1/4 in (305 mm x 405 mm x 6 mm).
5.
Security/Detention One Piece Framed Mirror with Rounded Corners - Front Mounting: Model 108. 18 ga type 304 stainless formed mirror, No. 8 polish finish, integral frame, rounded corners and 6 "T" nuts welded on back for rear mounting.
6.
Recessed Round Toilet Paper Holder - Rear Mounting: Model 110. 16 ga type 304 satin stainless, glass blasted satin finish interior. 4-1/2 in (115 mm) interior depth accommodates one standard toilet paper roll. Hidden contraband causes roll to project from holder allowing detection. Two "T" nuts welded on back for rear mounting.
7.
Square Faceplate Round Recessed Toilet Paper Holder-Rear Mounting: Model 110-1.
8.
Square Bezel Faceplate, Round Recessed Toilet Paper Holder - Rear Mounting: Model 110-13.
9.
Front Mounting POST Type Surface Mounted Toilet Paper Holder: Model 111. Fabricated of 18 ga 1-1/4 in (32 mm) OD satin stainless type 304. Flange is 3 in (76 mm) dia by 1/8 in (3 mm) thick and has 3 countersunk holes for front mounting.
10.
Folded Toilet Tissue Holder - Front Mounting: Model 117. Holder is 14 ga type 304 stainless steel, satin finish. Open design for detection of contraband. Provided with 4 mounting holes for front mounting.
11.
Rear Mounting Recessed Soap Dish: Model 140. 16 ga stainless steel type 304 with satin finish. One piece drawn construction with beveled trim and embossments for air circulation and drainage. Unit has two "T" nuts welded on back for rear mounting.
12.
Security Grab Bar (Rear Mounted); Series 160. Alloy 18-8 satin stainless, type 304. Flanges shall be 1/8 in (3 mm) thick, completely welded to tube end. 1-1/2 in (38 mm) dia tubing with 18 ga (0.048 in (1.2 mm) thick) wall. Each flange has three welded-on 1/4-20-UNC-2B internally threaded studs with threaded rod lengths as required to suit wall thickness, washers and nuts. Closure plate welded on bottom, 12 ga (0.105 in (2.7 mm) thick) stainless type 304 alloy 18-8.
 
** NOTE TO SPECIFIER ** Delete length requirements not required.
 
a.
Length as scheduled or indicated on Drawings.
b.
Model 160 - 24 in (610 mm).
c.
Model 161 - 30 in (762 mm).
d.
Model 163 - 36 in (914 mm).
e.
Model 166 - 42 in (1067 mm).
f.
Model 168 - 48 in (1219 mm).
g.
Model 158 - 18 in (457 mm).
13.
Security Grab Bar (Front Mounted); Series 160. Alloy 18-8 satin stainless steel, type 304. Flanges shall be 1/8 in (3 mm) thick, completely welded to tube end. 1-1/2 in (38 mm) dia tubing with 18 ga (0.048 in (1.2 mm) thick) wall. Each flange shall have three mounting holes to accommodate 1/4 in (6 mm) dia screws (not supplied). Closure plate welded on bottom, 12 ga (0.105 in (2.7 mm) thick) stainless type 304 alloy 18-8.
 
** NOTE TO SPECIFIER ** Delete length requirements not required.
 
a.
Length as scheduled or indicated on Drawings.
b.
Model 165 - 24 in (610 mm).
c.
Model 162 - 30 in (762 mm).
d.
Model 164 - 36 in (914 mm).
e.
Model 167 - 42 in (1067 mm).
f.
Model 169 - 48 in (1219 mm).
g.
Model 159 - 18 in (457 mm).
14.
Retractable Shower Seat - Front Mounting: Model 170. Seat folds up into cabinet, both fabricated of 16 ga stainless steel, exposed surfaces have a satin finish. Seat has reinforced channels. Wall sub frame furnished, with welded on masonry anchors. Sub Frame Opening: 15 in x 15 in x 2-3/4 in (380 mm x 380 mm x 70 mm).
P.
Shelves: As manufactured by ASI.
1.
Recessed Shelf: Model 0412. Fabricated of 22 ga, all welded construction, stainless steel with a satin finish. Size as scheduled or indicated on Drawings.
2.
Shelf With Raised Edges: Model 0690. Entire unit formed of one piece of 18 ga satin stainless, w/3/8 in (9.5 mm) depression. Size as scheduled or indicated on Drawings.
3.
Shelf: Model 0692. Fabricated of 18 ga stainless steel with a Satin finish. Front edge is hemmed for maximum rigidity and safety.
4.
Shelf With Backsplash: Model 0694. Fabricated of 18 ga stainless steel with a Satin finish on exposed surfaces. 5 in (127 mm) depth.
5.
Folding Utility Shelf for Toilet Compartments: Model 0698. 18 ga type 304 satin finish stainless steel with raised rim. Returns to upright position when not in use.
Q.
Shelves with Towel Bars: As manufactured by ASI.
1.
Towel Shelf with Towel Bar: Model 7311. Heavy duty unit with 3/4 in (19.5 mm) and 3/8 in (9.5 mm) dia type 304 stainless steel tubing. Bright finish only. Provide 20 in (510 mm) and 24 in (610 mm) as scheduled or indicated.
2.
Towel Shelf with Towel Bar: Model 7310. 8 in (200 mm) deep consisting of four 3/8 in (9.5) dia stainless steel tubes, with 1/4 in (6 mm) dia stainless towel bar below shelf, Provide 18 in (460 mm) and 24 in (610 mm) as scheduled or indicated on Drawings.
R.
Shower Curtain Rods: As manufactured by ASI.
1.
Shower Curtain Hook: Model 1200-SHU. Stainless steel hook for rods 1 in (25 mm) and 1-1/4 in (32 mm) dia.
2.
Vinyl Shower Curtain: Model 1200-V. Flame resistant, anti-bacterial, 8 ga vinyl fabric. Curtain shall be 6 in (150 mm) wider than opening up to 48 in (1220 mm) and 12 in (305 mm) wider than openings exceeding 48 in (1220 mm). Sizes and colors as scheduled or indicated on Drawings.
3.
Curved Shower Curtain Rod With Mounting Brackets: Model 1201. Curved Shower Curtain Rod with mounting brackets fabricated of alloy 18-8 stainless steel, type 304. Tubing is 18 ga, 1 in OD (25 mm) with a Satin finish and is protected during shipment with a plastic bag. Length is suitable for a 60 in (1524 mm) wide enclosure either on opposite walls or across face opening depending upon rod length chosen. Flanges are rust proof Zamac 3 with a chrome finish. Flanges have two countersunk 15/64 in (5.9 mm) dia holes to accept No 10 (M5) flat or oval head screws (by others).
4.
Extra Heavy-Duty Shower Curtain Rod: Model 1204. Flanges 3 in (75 mm) dia, 20 ga type 304 satin stainless. 1-1/4 in (32 mm) dia rod, 18 ga type 304 satin stainless tubing. Available in lengths up to 96 in (2440 mm).
5.
Heavy-Duty Shower Curtain Rod: Model 1214. Flanges 3 in (75 mm) dia, 20 ga type 304 satin stainless. 20 ga, 1 in (25 mm) dia rod. Available up to 72 in (1830 mm) long.
6.
Concealed Mounting Shower Curtain Rod: Model 1224. Chrome-plated brass flanges, satin finish. 1 in (25 mm) dia rod, 20 ga type 304 satin stainless tube. 1 flange has set screw to lock rod, prevent rotation. Available up to 72 in (1830 mm) long.
S.
Shower Seats: As manufactured by ASI.
1.
Corner Shower Seat: Model 0010. 304 satin finish stainless steel seat secured to one wall with full length piano hinge; supported on other wall by bracket. Size 15-3/4 in x 15-3/4 in (400 by 400 mm).
2.
L-Shaped Phenolic Four-Leg Fold-Up Shower Seat: Model 8202. Seat is 1/2 in (13 mm) thick solid phenolic, with white top and bottom surfaces and black edges, and is field reversible for left or right hand. Rear load feet remain on floor with rear frame mounted to wall and never need adjustment after correct installation. Front legs fold up automatically when seat is raised. Gravity prevents seat from dropping. Shower seat exceed ADA Accessibility Guidelines when mounted properly.
3.
Compact Folding Seat: Model 8203. Seat shall be 5/16 in (8 mm) thick, one piece, solid phenolic, ivory color. Frame, support legs, flanges and bracket shall be type 304 satin finished stainless steel. Provide a self-locking mechanism. Seat measures 18 in (460 mm) wide and projects 16 in (405 mm) from wall.
4.
Compact Folding Seat: Model 8207. Seat shall be constructed of stainless steel, satin finish, slatted design. Frame, support legs, flanges and bracket shall be type 304 satin finished stainless steel. Provide a self-locking mechanism. Seat measures 18 in (460 mm) wide and projects 16 in (405 mm) from wall.
5.
Compact Folding Seat: Model 8204. Seat shall be sponge cushion covered with off-white Naugahyde mounted on 1/2 in (13 mm) thick marine grade plywood. Frame, support legs, flanges and bracket shall be type 304 satin finished stainless steel. Self-locking mechanism. 18 in (460 mm) wide, projects 16 in (405 mm) from wall.
6.
Folding Shower Seat (Handed): Model 8205. Meets ADA Accessibility Guidelines and needs of physically disabled or elderly. Seat is sponge cushion covered with off-white Naugahyde mounted on 1/2 in (13 mm), marine-grade plywood. Frame, support legs, flanges, bracket are type 304 satin stainless. Reversible self-locking mechanism.
7.
Folding Shower Seat (Handed): Model 8206. Meets ADA Accessibility Guidelines and the needs of the physically disabled and elderly. Seat is 1/2 in (13 mm) thick, one piece solid phenolic, ivory colored. Frame, support legs, flanges, and bracket are type 304 satin finish stainless steel. Features a reversible self-locking mechanism. Seat measures 33 in (840 mm) wide and projects 22-7/8 in (580 mm) from wall.
8.
Folding Shower Seat (Handed): Model 8208. Meets ADA Accessibility Guidelines and the needs of the physically disabled and elderly. Frame, support legs, flanges, and bracket are type 304 satin finish stainless steel. Features a reversible self-locking mechanism. Seat measures 33 in (840 mm) wide and projects 22-7/8 in (580 mm) from wall. Seat shall be constructed of stainless steel, satin finish, slatted design.
9.
Rectangular Phenolic Four-Leg Fold-Up Shower Bench: Model 8209. Meets ADA Accessibility Guidelines and the needs of the physically disabled and elderly. Frame, support legs, flanges, and bracket are type 304 satin finish stainless steel. Solid Phenolic 1/2 inch x 22-1/2 inches x 48 inches (13 x 572 x 1219 mm) nonporous seat has white top and bottom surfaces with semi-gloss finish and black edges with radiused and burr free corners. Seat shall have slots for water drainage and user slip resistance.
10.
Folding Tub Seat: Model 8358. Seat is 1/2 in (13 mm) thick, solid phenolic, ivory color. Frame, mounting bracket and retainer hook are type 304 satin finished stainless steel. Seat is 15 in (380 mm) deep and projects 33-3/4 in (860 mm) from wall.
T.
Soap Dishes: As manufactured by ASI.
1.
Recessed Heavy Duty Stainless Steel Soap Dish and Bar: Model 0398. Type 304 stainless, exterior, bright polished finish; interior, sand blasted; w/mounting clamp.
2.
Recessed Heavy Duty Stainless Steel Soap Dish and Bar: Model 0399. Type 304 stainless steel, exterior, bright polished finish; interior, sand blasted finish. Includes anchor lugs for embedding in cement.
3.
Recessed Heavy Duty Stainless Steel Soap Dish: Model 0400. Type 304 stainless steel, exterior, bright polished finish; interior, sand blasted finish; w/mounting clamp.
4.
Recessed Heavy Duty Stainless Steel Soap Dish and Bar: Model 0401. Type 304 stainless steel, exterior, bright polished finish; interior, sand blasted finish. Includes anchor lugs for embedding in cement.
5.
Recessed Soap Dish: Model 0404-Z. Rust proof Zamac, one-piece construction.
6.
Recessed Soap Dish with Bar: Model 0410-Z. Zamac.
7.
Recessed Soap Dish with Bar: Model 0410-ZA. Zamac.
8.
Surface Mounted Soap Dish with Drain: Model 0720-Z. Zamac.
9.
Surface Mounted Soap Dish without Drain: Model 0721-Z. Zamac.
10.
Soap Dish: Model 7320. Drawn, one-piece soap dish welded to support arm and flange. Has two drain holes and two ridges to support bar of soap. 4-1/4 in (108 mm) wide, 2 in (51 mm) high; projects 4 in (102 mm) from wall.
11.
Recessed Soap Dish: Model 7404. Raised lip to retain soap.
12.
Recessed Soap Dish and Bar: Model 7410. Raised lip, 3/4 in (19 mm) dia bar.
U.
Soap Dispensers: As manufactured by ASI.
1.
Surface Mounted Shelf and Soap Dispenser (Single): Model 0318. Fabricated of 20 ga satin finish stainless steel. All-purpose valve. Capacity: 83 fl oz (2.5 L).
2.
Surface Mounted Shelf and Soap Dispenser (Dual): Model 0318A. Two all-purpose soap valves for mounting between lavatories.
3.
Recessed Horizontal Liquid Soap Dispenser: Model 0326. Stainless steel with Satin finish, all purpose soap valve, 52 fl oz (1.5 L) capacity ezfill, unbreakable refill window.
4.
Recessed Soap Dispenser: Model 0327. 34 oz (1 L) capacity, for lotion or detergent, with push valve. 18 ga stainless locking door. Vandal resistant refill indicator.
5.
Lavatory Mounted All Purpose Soap Dispenser 4 in (102 mm)/34 oz: Model 0332. Corrosion-resistant valve dispenses viscous lotion soaps and synthetic detergents. Fills from top. Free turning spout is vandal resistant. Spout and stem are stainless steel with bright finish. Escutcheon is chrome-plated brass. Adjustable threaded shank allows for installation in counter tops up to 3-1/2 in (90 mm) thick through 7/8 in (22 mm) dia hole. Capacity: 34 oz (1.0 L). Spout Length 4 in (102 mm).
6.
Lavatory Mounted All Purpose Soap Dispenser: Model 0332-C. Capacity: 20 oz (0.6 L) Spout Length: 4 in (102 mm).
7.
Lavatory Mounted All Purpose Soap Dispenser: Model 0332-D. Capacity: 34 oz (1.0 L) Spout Length: 6 in (152 mm).
8.
Lavatory Mounted All Purpose Soap Dispenser: Model 0332-CD. Capacity: 20 oz (0.6 L) Spout Length: 6 in (152 mm).
9.
Powder Soap Dispenser: Model 0337. Satin stainless steel, vandal resistant hinged top and wall bracket. Capacity: 32 oz, (0.9 L) dispenses free-flowing powder soap.
10.
Horizontal Soap Dispenser: Model 0345. Stainless steel, Satin finish. All-purpose soap valve and unbreakable refill window. Concealed fastening and hinged filler-top. Capacity: 40 fl oz (1.2 L).
11.
Soap Dispenser For Showers: Model 0346. Capacity: 40 fl oz (1.2 L). Valve mounted vertically from bottom of container for use in showers.
12.
Vertical Soap Dispenser: Model 0347. Capacity: 40 fl oz (1.2 L).
13.
Powdered Soap Dispenser (Rocking-action mechanism): Model 0348. Rocking-action mechanism dispenses 32 oz (0.9 L) of free-flowing powdered soaps. Container satin finish stainless steel.
14.
Foot Operated Surgical Soap Dispenser: Model 0349. Pneumatic pump mechanism, 32 oz (.9 L) polyethylene container. Free turning spout is type 316 stainless steel. 96 in (245 mm) long vinyl tubing attaches to anti-slip foot pump. Dispenses surgical soaps, antiseptic solutions and synthetic detergents.
15.
Surgical Soap Dispenser: Model 0350. Dispenses antiseptic solutions and synthetic detergent soaps. Chrome plated brass bracket. Capacity: 16 oz (0.5 L) white polyethylene globe.
16.
Surface Mounted Liquid Soap Dispenser: Model 0351. Stainless steel housing with mirror finish and removable plastic globe, concealed mounting. Used for viscous lotion soaps, and synthetic detergents. Capacity: 12 oz (0.4 L).
17.
Surface Mounted Lather Soap Dispenser: Model 0352. Stainless steel housing with mirror finish and removable plastic globe, concealed mounting. Capacity: 12 oz (0.4 L). Dispenses liquid soap in lather form. Use coconut base soap 10-20 percent concentrate only.
18.
Push-Up Type Soap Dispenser: Model 0355. Chrome plated ABS mounting bracket with translucent polyethylene soap container. Corrosion resistant ABS valve with stainless spring dispenses soaps, detergents or thin lotions. Capacity: 34 oz (1.0 L).
19.
Push-Up Type Soap Dispenser: Model 0356. Chrome plated ABS mounting bracket with translucent polyethylene soap container. Corrosion resistant ABS valve with stainless spring dispenses soaps, detergents or thin lotions. Capacity: 24 oz (0.71 L).
20.
Automatic Soap Dispenser: Model 0360. Stainless steel, Satin finish, proximity sensor, battery operated. Tamper resistant soap level viewing window, removable lid with special lock and key. Capacity: 35 fl oz (1000 mL).
21.
Automatic Soap Dispenser: Model 0361. White, high impact plastic, proximity sensor, battery operated. Tamper resistant soap level viewing window, swing open body with special lock and key. Capacity: 28 fl oz (800 mL)
22.
EZFill(tm) Vanity Mounted Automatic Soap Dispensing System Soap Dispenser shall be Model No 0390-(n) of American Specialties, Inc. Soap Dispenser shall dispense liquid soap within the viscosity range of 100 - 3800 cP (MPa•s) in stream cycles with volumes of approximately 0.007 oz (0.2 ml) to 0.08 oz (2.3 ml) in four steps programmable by owner with remote control programming unit (optional; supplied one (1) per six (6) pack) with factory preset at approximately 0.03 oz (0.8 ml). Operation is initiated by hands-free sensor controlled by microprocessor digital circuitry and peristaltic pump is powered by six D size 1.5 V batteries (supplied by others) in a screw-locked IP67 rated compartment (provided) located under counter or an AC Adapter (also IP67 rated, provided, select model) plugged into GFCI outlet (by others). Unit shall have chrome plated spout and sensor housing with a highly polished finish over all exposed surfaces. Unit shall have LED in sensor to indicate function and battery condition. A self-adhesive label shall be provided for use at owner’s option to indicate dispenser function. Unit shall mount on vanity deck up to 2 inches (51 mm) thick through 1 inch (25 mm) diameter hole minimum to 1-1/4 inches (32 mm) max. Soap supply shall be from EZFill(tm) Vanity Mounted Top-Fill Port and Multi-Feed Tank (supplied separately) with capacity of 169 oz (5 L) of liquid soap containing no abrasives or particulates. Up to six individual EZFill(tm) vanity mounted automatic soap dispenser units shall draw from each Multi-Feed tank located under counter through connection to under-counter soap distribution tubing (provided).
 
** NOTE TO SPECIFIER ** 0390 is sold separately to the 0390-(n). Delete if not required.
 
a.
EZFill(tm) Vanity Mounted Top-Fill Port with Multi-Feed Soap Tank shall be Model No 0390 of American Specialties, Inc. Soap Dispensing System shall hold 169 oz (5 L) of liquid soap of correct viscosity and without abrasive or particulate content to supply up to six individual EZFill(tm) vanity mounted automatic soap dispenser units. Multi-Feed tank shall be leak-proof seamless molded translucent plastic to show quantity of soap remaining at any time and will be located under counter, either on floor of base cabinet or in optional wall mounting bracket. Tank shall be connected to under-counter soap distribution tubing (provided with separately specified soap dispensers). Top-Fill Port flexible fiber-reinforced soap fill hose (provided) with single coupling. Unused soap distribution ports shall be closed with blanking fittings (provided). EZFill(tm) Top-Fill Port and cover shall have highly polished chrome plated finish over all exposed surfaces. Flange shall have an O-ring to seal against vanity top surface to prevent liquid leaks through counter top. Tank shall be filled by opening fill port cover with service wrench (provided) and loading bulk soap. Concealed air vent hole shall allow pumps (supplied separately) to provide smooth soap delivery performance. EZFill(tm) Top-Fill Port shall mount on vanity through 1-9/32 inches (32.5 mm) diameter hole minimum to 1-11/32 inches (34 mm) max and shall accommodate vanity thickness up to 2 inches (51 mm). Owner’s Manual and Installation Guide (OM & IG) shall be provided with unit in carton.
 
** NOTE TO SPECIFIER ** 0390-BR is sold separately to the 0390-(n). Delete if not required.
 
b.
Mounting Bracket for EZFill(tm) Multi-Feed Soap Tank shall be Model No 0390-BR of American Specialties, Inc. Mounting bracket shall be fabricated of 14 gauge type 304 stainless steel alloy 18-8. Corners shall be rounded and all edges deburred. All exposed surfaces shall have a #4 satin finish.
23.
Vanity Mounted Automatic Soap Dispenser shall be Model No 0391-(n) (specify model suffix from schedule) of American Specialties, Inc. Soap Dispenser shall hold 33.8 oz (1 L) of liquid soap within the viscosity range of 100 - 3800 cP (MPa•s) and dispense in owner programmable stream cycles with volumes of approximately 0.007 oz (0.2 ml) to 0.08 oz (2.3 ml) in four steps with remote control programming unit (optional; supplied one per six pack) with factory preset at approximately 0.03 oz (0.8 ml). Operation is initiated by hands-free sensor controlled by microprocessor digital circuitry powered by six D size 1.5 V batteries (supplied by others) in a screw-locked IP67 rated compartment or an AC Adapter (also IP67 rated, provided, select model) located under counter. Unit shall have chrome plated spout and sensor housing with a highly polished finish over all exposed surfaces. Unit shall have LED in sensor to indicate function and battery condition. A self-adhesive label shall be provided for use at owner’s option to indicate dispenser function. Tank shall be translucent to show quantity of soap remaining at any time. Tank shall be disengaged and engaged into pump/control housing under counter by manually unscrewing to allow refilling and threading back up into pump/control housing to retain for operation. Unit shall mount on vanity deck through 1 inch (25 mm) diameter hole minimum to 1-1/4 inches (32 mm) maximum.
24.
Surface Mounted Liquid Soap Dispenser (Push-Up Type): Model 0370. Dispenses soap, detergents, and thin lotions. Bracket and valve chrome plated ABS. Capacity: 28 oz (0.8 L) white polyethylene globe.
25.
Push-Up Type Soap Dispenser: Model 0371. For soap, detergent, thin lotion. Bracket and valve chrome plated ABS. Capacity: 16 oz (0.5 L) white polyethylene globe.
26.
Recessed Cartridge Soap Dispenser: Model 5002. Recessed, stainless steel, satin finish door has piano hinge and lock. Body 16 ga, door 22 ga.
27.
Retrofit Soap Valve - Low-Profile Retrofit Soap Valve: Model V-320: Chrome-plated brass housing, circular push-button. Internal parts are ABS plastic and stainless, will not be corroded by soaps, lotions or detergents. Suitable for antimicrobial soaps.
28.
Low-Profile Retrofit Soap Valve: Model V-321. ABS plastic body and rectangular push-button. Internal parts are ABS plastic and stainless steel that will not corrode when exposed to soaps, lotions or detergents. Suitable for antimicrobial soaps.
29.
Soap Dispenser: Model 2001. Sturdy ABS plastic, dispenses liquid soaps, detergent, and viscous liquids. 32 oz (0.95 L).
30.
Surface Mounted Cartridge Soap Dispenser: Model 5001-SS. Surface mounted, stainless steel, satin finish door has piano hinge and lock. Body 16 ga, door 22 ga.
V.
Soap Systems: As manufactured by ASI.
1.
Horizontal Valve for Gravity Soap System (Chrome plated brass liquid soap valve): Model 0353. Chrome plated brass liquid soap valve. Female 3/8 in (9.5 mm) NPT. Projects 3-1/2 in (89 mm).
2.
Deck Mounted Soap Valve for Gravity Soap System: Model 0375. Chrome plated brass body w/stainless, brass internal mechanism. Male 1/2-14 NPSM-2A. Mounting hole accommodates 2-7/32 in (56 mm) dia shank. Spout: 4 in (102 mm) long.
3.
Surface Mounted Reservoir Soap Tank: Model 0377.
4.
Surface Mounted Gravity Soap Tank: Model 0378. Tank is mounted over a concealed wall plate. Leak proof positive-acting soap level indicator on front of tank. Capacity: 2 gal (7.6 L) 3/8 in (9.5 mm) female coupling.
W.
Telephone Enclosures: As manufactured by ASI.
1.
Model 1305 - Tellette 1305 Collection: Wing panels of unit shall be 16 ga stainless steel and have industrial carpet on inside for sound control. Back panel and shelf shall be stainless steel with Satin finish. Mounting bracket has pre-drilled mounting holes.
 
** NOTE TO SPECIFIER ** Delete divider not required.
 
a.
Divider Type 01: Stainless Steel Satin Finish Back and Side Wings.
b.
Divider Type 02: Perforated Stainless Steel Back and Side Wings.
c.
Divider Type 03: Phenolic Side Wings (Gray).
d.
Divider Type 04: Acrylic Wings (Clear).
e.
Divider Type 04: Acrylic Wings (Bronze).
f.
Divider Type 08: Perforated Stainless Steel Back.
 
** NOTE TO SPECIFIER ** Delete function not required.
 
g.
Function 10: ADA Front Reach - 30 in (762 mm) Inside Clearance, 48 in (1219 mm) Coin Slot Height.
h.
Function 11: TDD Receiver Plate.
i.
Function 12: Sloped Shelf.
j.
Function 13: Directory Holder Shelf - add 6 in (152 mm) to height.
k.
Function 14: Swing-Up Directory.
l.
Function 15: Directory Binder and Chain-For Use With Directory Holder Shelf.
m.
Function 16: Light Module.
n.
Function 17: Multiple Units w/ Common Divider - Indicate number in ea group.
2.
Model 1350 - Tellette 1350 Collection: Wing panels, shelf and directory holder shall be 16 ga stainless steel. Back panel shall be 18 ga stainless steel with Satin finish. Mounting bracket shall have pre-drilled mounting holes.
 
** NOTE TO SPECIFIER ** Delete divider not required.
 
a.
Divider Type 02: Perforated Stainless Steel Back and Side Wings.
b.
Divider Type 03: Phenolic Side Wings (Gray).
c.
Divider Type 06: Carpet Inside; Stainless Steel Outside.
d.
Divider Type 07: Acrylic Wings (Clear).
e.
Divider Type 07: Acrylic Wings (Bronze).
f.
Divider Type 08: Perforated Stainless Steel Back.
 
** NOTE TO SPECIFIER ** Delete function not required.
 
g.
Function 10: ADA Front Reach - 30 in (762 mm) Inside Clearance, 48 in (1219 mm) Coin Slot Height.
h.
Function 11: TDD Undershelf Holder.
i.
Function 13: Directory Holder Shelf - add 6 in (152 mm) to height.
j.
Function 14: Swing-Up Directory.
k.
Function 15: Directory Binder and Chain-For Use With Directory Holder Shelf.
l.
Function 16: Light Module - Add 6 in (152 mm) to Height;
m.
Function 17: Multiple Units w/ Common Divider - Indicate number in ea group.
n.
Function 24: Coin Slot and Return Opposite Side with Cable Thru Door.
3.
Model 1450 - Tellette 1450 Collection - Unit shall be 18 ga stainless steel with Satin finish on exposed surfaces. Recessed mounting box shall be 16 ga steel with black baked enamel finish and pre-drilled mounting holes. Receiver cord through face plate.
 
** NOTE TO SPECIFIER ** Delete function not required.
 
a.
Function 15: Directory Binder and Chain-For Use w/ Recessed Directory Shelf.
b.
Function 19: TDD Recessed Shelf- Add 6 in (152 mm) to Height.
c.
Function 20: Recessed Directory Shelf-Add 6 in (152 mm) to Height
d.
Function 24: Coin Slot and Return Opposite Side with Cable Thru Door.
4.
Model 1550 - Tellette 1550 Collection - Curved unit shall be type 304 steel with Satin finish on exposed surfaces. Outer wrap shall be 1/8 in (3 mm) thick, perforated interior shall be 22 ga and shelf shall be 16 ga. Unit shall have acoustical insulation between perforated interior and wrap for sound control.
 
** NOTE TO SPECIFIER ** Delete function not required.
 
a.
Function 10: ADA Front Reach - 30 in (762 mm) Inside Clearance, 48 in (1219 mm) Coin Slot Height.
b.
Function 11: TDD Undershelf Holder.
c.
Function 12: Swing-up Directory.
d.
Function 15: Directory Binder and Chain-For Use With Directory Holder Shelf.
e.
Function 18: Multiple Units.
f.
Function 21: Sloped Shelf- add 4 in (102 mm) to height.
g.
Function 22: Directory Holder Shelf - add 6 in (152 mm) to height.
h.
Function 23: Light Module.
i.
Function 24: Coin Slot and Return Opposite Side with Cable Thru Door.
5.
Model 1600 - Tellette 1600 Collection - Curved unit shall be type 304 steel with Satin finish on exposed surfaces. Outer wrap shall be 1/8 in (3 mm) thick, perforated interior shall be 22 ga and shelf shall be 16 ga. Unit shall have acoustical insulation between perforated interior and wrap for sound control.
 
** NOTE TO SPECIFIER ** Delete function not required.
 
a.
Function 10: ADA Front Reach - 30 in (762 mm) Inside Clearance, 48 in (1219 mm) Coin Slot Height.
b.
Function 11: TDD Undershelf Holder.
c.
Function 12: Swing-up Directory.
d.
Function 15: Directory Binder and Chain-For Use With Directory Holder Shelf.
e.
Function 18: Multiple Units.
f.
Function 21: Sloped Shelf- add 4 in (102 mm) to height.
g.
Function 22: Directory Holder Shelf - add 6 in (152 mm) to height.
h.
Function 23: Light Module.
 
** NOTE TO SPECIFIER ** When ordering, specify number of binders (e.g., 1700-3).
 
6.
Model 1700 Series - Quick-Ref Directory Shelf - Directory shelf 16 ga stainless Binder covers are Mylar with stainless hinges. Accommodates from 3 to 7 binders.
 
**NOTE TO SPECIFIER ** Theft-resistant spindle available as indicated with an asterisk in the catalog.
 
X.
Toilet Tissue Dispensers/Holders - General:
1.
Theft-Resistant Spindles: Model Suffix R009.
Y.
Toilet Tissue Dispensers/Holders: As manufactured by ASI.
1.
Surface Mounted Dual Roll Toilet Paper Dispenser Stainless Steel: Model 0030. Holds two rolls up to 5-1/4 in (133 mm) dia (1800 sheets). Top roll automatically drops in place when bottom roll is used up. Type 304 stainless steel cabinet and mechanism. Theft resistant spindles.
2.
Recessed Dual Roll Toilet Paper Dispenser Stainless Steel: Model 0031. Holds two rolls up to 5-1/4 in (133 mm) dia (1800 sheets). Top roll automatically drops in place when bottom roll is used up. Type 304 stainless steel cabinet and mechanism. Theft resistant spindles. Provided with flange for recess mounting.
3.
Dual Access Partition Mounted Dual Roll Toilet Paper Dispenser Stainless Steel: Model 0032. Top roll automatically drops in place when bottom roll is used up. Type 304 stainless steel cabinet and mechanism. Theft resistant spindles. Serves two toilet compartments by mounting through partition. Dispenses 4 toilet tissue rolls. Adjustable to accommodate partitions from 1/2 in to 1-1/4 in thick (13 to 32 mm).
4.
Semi-Recessed Mounted Twin Hide-A-Roll Toilet Paper Dispenser: Model 0033. Holds two rolls up to 5-1/4 in (133 mm) dia (1800 sheets). Top roll automatically drops in place when bottom roll is used up. Type 304 stainless steel cabinet, mechanism. Theft resistant spindles. Semi-recessed for reduced partitions, wall projection.
5.
Partition Mounted Dual Twin Hide-A-Roll Toilet Paper Dispenser: Model 0034. Top roll automatically drops in place when bottom roll is used up. Type 304 stainless steel cabinet and mechanism. Theft resistant spindles. Serves two toilet compartments by mounting through partition. Dispenses 4 toilet tissue rolls. Reduced partition projection. Adjustable to accommodate partitions 3/4 in - 3-1/8 in thick (19 - 79 mm).
6.
Low Profile Surface Mounted Jumbo-Roll Toilet Tissue Dispenser: Model 0039.
7.
Surface Mounted Security Toilet Paper Dispenser: Model 8436-2S. Holds two standard or two 5-1/4 inches (133 m) diameter 1800 sheet tissue rolls. Fabricated of 18 ga type 304 stainless steel with satin finish. Internal baffle shall provide intermediate support for locking spindle bar for enhanced security. Structural assembly of body components shall be of welded construction. Spindle bar shall be held closed with a padlock with 5/16 inch (8 mm) diameter maximum shackle (supplied by others). Theft and vandal resistant spindle bar with welded collar stop shall be supplied.
8.
Surface Mounted Twin 9 in Jumbo-Roll Toilet Tissue Dispenser: Model 0040. Holds two 9 in (230 mm) dia rolls of 2-1/4 in or 3 in (57 or 76 mm) dia core. When one roll is depleted, slide panel to expose other roll. Door cabinet and mounting plate fabricated of 18 ga type 304 stainless steel with satin finish. Two viewing slot and tumbler lock.
9.
Surface Mounted Jumbo Roll Toilet tissue Dispenser: Model 0042. Holds one roll up to 10 in (254 mm) dia of 1-5/8 in or 2-1/4 in (41 or 57 mm) dia core. Outer cabinet is type 304 stainless steel with a satin finish. Unit has viewing slot and tumbler lock.
10.
Surface Mounted Folded Toilet Tissue Cabinet: Model 0262. 22 ga type 304 stainless steel with satin finish, provided with tumbler lock and view slot. Unit accommodates 1300 single or double fold toilet tissues.
11.
Single Roll Toilet Paper Dispenser/Spindles: Model 0263-1. Heavy-duty cast aluminum, satin matte silver-gray finish. No waste rocking action spindles of cycolac ABS thermoplastic. Holds a roll up to 6 in (150 mm) dia (2000 sheets).
12.
Vandal Resistant Hood (for No. 263-1): Model 0266. For use only with 0263-1.
13.
Single Roll Toilet Paper Dispenser/Spindles: Model 0263-12. Heavy-duty cast aluminum, satin matte silver-gray finish. No waste rocking action spindles of cycolac ABS thermoplastic. Holds a roll up to 6 in (150 mm) dia (2000 sheets). Includes vandal resistant spindle locked into place by concealed set screw.
14.
Single Roll Toilet Paper Dispenser/Spindles (Uncontrolled): Model 0263-1A. Cast aluminum, satin matte silver-gray finish. Spindles of cycolac ABS thermoplastic without controlled delivery. Holds a roll up to 6 in (150 mm) dia (2000 sheets).
15.
Double Roll Toilet Paper Dispenser/Spindles: Model 0264-1. Heavy-duty cast aluminum, satin matte silver-gray finish. No waste rocking action spindles of cycolac ABS thermoplastic. Holds 2 rolls up to 6 in (152 mm) dia (2000 sheets).
16.
Vandal Resistant Hood: Model 0267, 14 ga satin stainless for use only with 0264-1.
17.
Double Roll Toilet Paper Dispenser/Spindles (Uncontrolled): Model 0264-1A. Heavy-duty cast aluminum, satin matte silver-gray finish. Cycolac ABS thermoplastic spindles without controlled delivery. Holds 2 rolls up to 6 in (152 mm) dia (2000 sheets).
18.
Double Roll Toilet Paper Dispenser/Spindles: Model 0264-12. Heavy-duty cast aluminum, satin matte silver-gray finish. No waste rocking action spindles of cycolac ABS thermoplastic with vandal resistant spindle locked into place by concealed set screw. Holds 2 rolls up to 6 in (152 mm) dia (2000 sheets).
19.
Double Roll Toilet Paper Dispenser/Spindles (Uncontrolled): Model 0264-1A2. Heavy-duty cast aluminum, satin matte silver-gray finish. Spindles of cycolac ABS thermoplastic without controlled delivery. Vandal resistant spindle locked into place by concealed set screw. Holds 2 rolls up to 6 in (152 mm) dia (2000 sheets).
20.
Zamac Bathroom Accessories - Recessed Toilet Tissue Holder: Model 0402-Z.
21.
Recessed Toilet Seat Cover Dispenser: Model 0477. Door has tumbler lock, dispenses 500 single or half-fold seat covers.
22.
Surface Mounted Toilet Seat Cover Dispenser: Model 0477-SM. Door has tumbler lock, dispenses 250 single or half-fold seat covers.
23.
Extra Roll Toilet Paper Holder: Model 7303. Extra roll of paper is placed over the horn type holder. Stainless steel set screw on bottom of flange locks unit to mounting plate.
24.
Stainless Steel Shelf and Double Toilet Paper Holder: Model 0697-GAL. Shelf, 18 ga type 304 satin finish stainless, front edge hemmed. Holds 2-1800 sheet paper rolls.
25.
Zamac Bathroom Accessories - Toilet Paper Holder: Model 0705-Z.
26.
Double Surface Mounted Toilet Paper Holder Chrome-plated Steel: Model 0710. Dispenses one standard or 1800 sheet toilet tissue roll.
27.
Double Surface Mounted Toilet Paper Holder Chrome-plated Steel: Model 0715. Provided with vandal resistant locking device and mechanism to provide controlled delivery. High polish finish. Dispenses two standard or 1800 sheet toilet tissue rolls.
Z.
Toilet Tissue Dispensers/Holders: As manufactured by ASI.
 
** NOTE TO SPECIFIER ** Delete if not required.
 
1.
Spindles: Provide optional theft-resistant spindle.
2.
Toilet Paper Holder- Single Roll: Model 7305-B. Type 304 bright finish stainless steel with chrome-plated roller. Heavy ga concealed bracket mounts on wall secured with stainless steel set screw. Holds 1800 sheet standard core roll. Bright finish.
3.
Toilet Paper Holder- Single Roll: Model 7305-2B. Type 304 bright finish stainless steel with chrome-plated roller. Heavy ga concealed bracket mounts on wall secured with stainless steel set screw. Holds two 1800 sheet standard core roll. Satin finish.
4.
Toilet Paper Holder- Double Roll: Model 7305-2S. Type 304 bright finish stainless steel with chrome-plated roller. Heavy ga concealed bracket mounts on wall secured with stainless steel set screw. Holds two 1800 sheet standard core roll. Bright finish.
5.
Toilet Paper Holder- Double Roll: Model 7305-S. Type 304 bright finish stainless steel with chrome-plated roller. Heavy ga concealed bracket mounts on wall secured with stainless steel set screw. Holds 1800 sheet standard core roll. Satin finish.
AA.
Toilet Tissue Dispensers/Holders: Stainless steel as manufactured by ASI.
1.
Rollers: Spring loaded chrome roller.
 
** NOTE TO SPECIFIER ** Delete items below not required.
 
2.
Provide theft-resistant spindle.
3.
Provide drywall installation.
4.
Provide wet wall installation (no clamp is required for wetwall).
5.
Double Roll Recessed Toilet Paper Holder: Model 7402-B. Bright finish.
6.
Double Roll Recessed Toilet Paper Holder: Model 7402-S. Satin finish.
7.
Double Roll Recessed Toilet Paper Holder with Hood: Model 7402-HB. Bright finish.
8.
Double Roll Recessed Toilet Paper Holder with Hood: Model 7402-HS. Satin finish.
9.
Double Roll Surface Mounted Toilet Paper Holder: Model 7402BSM.. Bright finish.
10.
Double Roll Surface Mounted Toilet Paper Holder: Model 7402SSM. Satin finish.
AB.
Toilet Tissue Dispensers/Holders: As manufactured by ASI.
 
** NOTE TO SPECIFIER ** Delete items below not required.
 
1.
Provide bright stainless finish.
2.
Provide satin stainless finish.
3.
Provide theft-resistant spindle.
4.
Provide drywall installation.
5.
Provide wet wall installation (no clamp is required for wetwall).
6.
Double Roll Recessed Toilet Paper Holder: Model 74022.
7.
Double Roll Recessed Toilet Paper Holder with Hood: Model 74022-H.
8.
Double Roll Surface Mounted Toilet Paper Holder: Model 74022-SM.
9.
Extra Roll Recessed Single Toilet Paper Holder: Model 7403. Spring loaded chrome roller. Extra roll stored behind roll in use.
AC.
Toothbrush and Tumbler Holders: As manufactured by ASI.
1.
Recessed Mounted Tumbler Holder: Model 0406-Z. Fabricated of rust proof Zamac of one piece, seamless construction.
2.
Zamac Bathroom Accessories - Toothbrush and Tumbler Holder: Model 0735-Z.
3.
Toothbrush and Tumbler Holder: Model 7335. 4-1/4 in x 2 in (108 by 52 mm).
AD.
Towel Bars, Holders and Pins: As manufactured by ASI.
1.
Heavy Duty Stainless Steel Towel Bar: Model 0755-SS. 1 in (25 mm) O.D. by 20 ga, type 304 stainless steel with a Satin finish. Support posts constructed of heavy brass with satin finish to match stainless steel. Provide 18 in, 24 in, 30 in and 36 in (460, 610, 760 and 915 mm) lengths as scheduled or indicated on Drawings.
2.
Round Stainless Steel Towel Bar: Model 0755-Z. Provide 18 in, 24 in, 30 in, 36 in (460, 610, 760, 915 mm) lengths as scheduled or indicated on Drawings.
3.
Zamac Bathroom Accessories - Round Towel Bar Unit: Model 0755-ZA. Provide 18 in, 24 in, 30 in and 36 in (460, 610, 760 and 915 mm) lengths as scheduled or indicated on Drawings.
4.
Square Stainless Steel Towel Bar: Model 0760-Z. Provide 18 in, 24 in, 30 in, 36 in (460, 610, 760, 915 mm) lengths as scheduled or indicated on Drawings.
5.
Zamac Bathroom Accessories - Towel Ring: Model 0785-Z.
6.
Zamac Bathroom Accessories - Towel Ring: Model 0785-ZA.
7.
Towel Pin: Model 7301. 3-1/2 in (89 mm) from wall.
8.
Towel Bar-Round: Model 7355. 3/4 in (19 mm) dia stainless steel towel bar. Provide 18 in, 24 in and 30 in (460, 610 and 760 mm) lengths as scheduled or indicated on Drawings. Extends 3-1/4 in (80 mm) from wall.
9.
Towel Bar-Round: Model 7360. 3/4 in (19 mm) dia stainless steel towel bar. Provide 18 in, 24 in and 30 in (460, 610 and 760 mm) lengths as scheduled or indicated on Drawings. Extends 3-1/4 in (80 mm) from wall.
10.
Stainless Steel Shelf: Model 7380. Provide 18 in and 24 in (460 and 610 mm) lengths as scheduled or indicated on Drawings. Shelf, 5 in (125 mm) wide, extends 6-1/8 in (155 mm) from wall. Edges shall be roll-formed for safety.
11.
Towel Ring: Model 7385. For bath and hand towels. Ring is 4-1/2 in (115 mm) wide, 1/4 in (6 mm) dia stainless. Projects 2-1/2 in (65 mm) from wall. 5 in (125 mm) high.
12.
Surface Mounted Towel Shelf: Model 7309; w/out Drying Rod and Support Brackets.
2.7
GRAB BARS
 
** NOTE TO SPECIFIER ** Delete paragraphs and subparagraphs below for products not required.
 
A.
Grab Bars: 3100 Series by ASI; 1-1/4 in (32 mm) dia handrail, concealed mounting flanges
1.
Flange: 3 in (76 mm) dia, 1/2 in (13 mm) deep, 11 ga, type 304 stainless steel with satin finish. Tenon Plate: 13 ga with slotted screw holes.
2.
Concealed Mounting: 3 stainless screws secure flange to concealed tenon plate.
 
** NOTE TO SPECIFIER ** Delete products not required.
 
3.
Product: Model 3100.
4.
Product: Model 3100-P, peened surface.
B.
Grab Bars: 3200 Series by ASI; 1-1/2 in (38 mm) dia handrail, concealed mounting flanges.
1.
Flange: 3 in (76 mm) dia, 1/2 in (13 mm) deep, 11 ga, type 304 stainless steel with satin finish. Tenon Plate: 13 ga with slotted screw holes.
2.
Concealed Mounting: 3 stainless screws secure flange to concealed tenon plate.
 
** NOTE TO SPECIFIER ** Delete products not required.
 
3.
Product: Model 3200.
4.
Product: Model 3200-P, with peened surface.
C.
Grab Bars: 3400 Series by ASI; 1-1/4 in (32 mm) dia handrail, flanges for exposed mounting.
1.
Flange: 3 in (76 mm) dia, 1/8 in (3 mm) thick, type 304 stainless steel.
2.
Exposed Mounting: Screw holes are drilled and countersunk.
 
** NOTE TO SPECIFIER ** Delete products not required.
 
3.
Product: Model 3400.
4.
Product: Model 3400-P, with peened surface.
5.
Product: Model 3413; Swing-Up Grab Bar.
6.
Product: Model 3413P; Swing-Up Grab Bar, with peened surface.
7.
Product: Model 3451; Swing-Up Grab Bar.
8.
Product: Model 3451P; Swing-Up Grab Bar, with peened surface.
9.
Product: Model 3454; Swing-Away Grab Bar.
10.
Product: Model 3454P; Swing-Away Grab Bar, with peened surface.
D.
Grab Bars: 3500 Series by ASI; 1-1/2 in (38 mm) dia handrail, flanges for exposed mounting.
1.
Flange: 3 in (76 mm) dia, 1/8 in (3 mm) thick, type 304 satin finish stainless steel.
2.
Exposed Mounting: Screw holes are drilled and countersunk.
 
** NOTE TO SPECIFIER ** Delete products not required.
 
3.
Product: Model 3500.
4.
Product: Model 3500-P, with peened surface.
E.
Grab Bars:
 
** NOTE TO SPECIFIER ** Delete sizes not required.
 
1.
Size: Straight grab bar, 18 in (457 mm).
2.
Size: Straight grab bar, 24 in (610 mm).
3.
Size: Straight grab bar, 30 in (762 mm).
4.
Size: Straight grab bar, 36 in (914 mm).
5.
Size: Straight grab bar, 42 in (1067 mm).
6.
Size: Straight grab bar, 48 in (1219 mm).
7.
Size: Straight grab bar, lengths as indicated on Drawings.
8.
Covers: Snap over flange to conceal screws; type 304 stainless steel, 22 ga, 3-3/16 in (81 mm) dia.
9.
Concealed Mounting Flanges: 3-1/8 in (79 mm) O.D. dia with two screw holes and three locking dimples; 1/8 in (3 mm) thick, type 304 stainless steel.
 
** NOTE TO SPECIFIER ** Delete series not required.
 
10.
Series: 3700 Series by ASI; 1-1/4 in (32 mm) dia handrail with snap-on flange covers.
 
** NOTE TO SPECIFIER ** Delete products not required.
 
a.
Product: Model 3700.
b.
Product: Model 3700-P, with peened surface.
c.
Product: Model 3700-W; white powder coated finish.
11.
Series: 3800 Series by ASI; 1-1/2 in (38 mm) dia handrail with snap-on flange covers.
 
** NOTE TO SPECIFIER ** Delete products not required.
 
a.
Product: Model 3800.
b.
Product: Model 3800-P, with peened surface.
c.
Product: Model 3800-W, white powder coated finish, peened surface..
 
** NOTE TO SPECIFIER ** Delete products not required.
 
2.8
ELECTRIC HAND DRYERS
A.
Electric Hand Dryers: Recessed mounted ADA dryer, quick drying - Under 15 seconds. Operates automatically using infrared sensor; auto-resetting thermostat; owner-adjustable air speed and air temperature; on/off heating options; dryer automatically shuts off after time-out when user removes hands from sensor zone. Decibel Level 68.9 dB-A @ 2M MIN -74.3 dB-A @ 2M MAX, adjustable by owner.
 
** NOTE TO SPECIFIER ** Delete hand dryer not required.
 
1.
Product: 0134 TURBO-TUFF RECESSED MOUNTED HAND DRYER by ASI; 18 gauge stainless steel cover with satin finish and seamless design.
2.
Compliance: Approved, listed by Underwriters Laboratories, Inc.
3.
Motor: 0.67 HP, 16-29 K RPM, adjustable brush type, dual ball bearings. Voltage 115-277 VAC, 50/60 Hz, .75-1.0 kW. Heater 325-450 watts. Current: 10.4 Amps at 115 VAC.
4.
Finish: Satin stainless steel.
B.
Electric Hand Dryers: Surface mounted 4 in (102 mm) deep ADA dryers, Quick Drying - Under 30 Seconds, No Touch - Energy Efficient Operation, Universal Voltage - Automatically Adjusts, Decibel Level 64 dB-A at 2M.
1.
Product: 0165 PROFILE COMPACT DRYER by ASI; cast aluminum cover 7/64 in (2.8 mm) thick.
2.
Compliance: Approved, listed by Underwriters Laboratories, Inc.
3.
Ov Dim: ADA compliant, 11-3/8 in x 11-7/32 in x 3-7/8 in (289 x 285 x 99 mm).
4.
Motor: 1/4 HP - 7500 RPM - Brush Type, Voltage: 100-240 - 50/60 Hz, 1.4 - 1.8 kW. Air Output: 180 CFM - Temp: 140 deg F (60 deg C). Heater: 1488 Watts. Current: 14.4 Amps at 115 VAC.
 
** NOTE TO SPECIFIER ** White is standard if no color is indicated. Delete color not required.
 
5.
Color: White epoxy enamel on cast aluminum cover.
6.
Color-40: Cool Grey epoxy enamel on cast aluminum cover.
C.
Electric Hand Dryers: Recessed Combo Three-in-One Paper Towel Dispenser with Waste Receptacle and Automatic Electric Hand Dryer. Unit shall hold and dispense 500 standard multi-fold or 400 standard C-fold paper towels and shall have a waste capacity of 6.8 gal (26 L). Quick Drying - Less than 15 Seconds, No Touch - Energy Efficient Operation, 110/120 Voltage.
1.
Product: 64672-1 THREE-IN-ONE UNIT RECESSED COMBINATION PAPER TOWEL DISPENSER, AUTOMATIC HAND DRYER AND WASTE RECEPTACLE (0199 dryer) by ASI; satin finish.
2.
Compliance: Approved, listed by Underwriters Laboratories, Inc (C-UL-US).
3.
Overall Dim: ADA compliant, 15-3/8 in x 55-3/8 in x 7-1/2 inches (391 mm x 1407 mm x 191 mm).
4.
Motor: 0.67 HP - 29,000 RPM - Brush Type, Voltage: 110-120 - 50/60 Hz.
5.
Air Output: 60 CFM - Temp: 131 deg F (55 deg C). Heater: 1000 Watts. Current: 8.33 Amps at 110 VAC.
6.
Hand Dryer Color: White epoxy enamel on cast aluminum cover.
D.
Electric Hand Dryers: Surface mounted 4 in (102 mm) deep ADA dryers, Quick Drying - Under 25 Seconds, No Touch - Energy Efficient Operation, Universal Voltage - Automatically Adjusts to Voltages, Modern Design and Durable, Decibel Level 63 dB-A at 2M.
 
** NOTE TO SPECIFIER ** Delete hand dryer not required.
 
1.
Product: 0184 PROFILE STEEL COVER WITH PORCELAIN ENAMEL by ASI.
2.
Product: 0184 PROFILE STAINLESS STEEL COVER WITH MECHANICAL by ASI.
3.
Compliance: Approved, listed by Underwriters Laboratories, Inc.
4.
Overall Dim: ADA compliant, 14-7/16 in x 10-13/16 in x 3-15/16 in (367 mm x 275 mm x 100 mm).
5.
Motor: 1/4 HP - 7500 RPM - Brush Type. Voltage: 277 VAC - 50/60 Hz. Air Output: 185 CFM - Temp: 149 deg F (65 deg C). Heater: 2020 Watts. Current: 7.9 Amps.
 
** NOTE TO SPECIFIER ** White is standard if no color is indicated. Delete color/finishes not required.
 
6.
Color: White porcelain enamel on steel cover.
7.
Color-40: Grey porcelain enamel on steel cover.
8.
Color-41: Black porcelain enamel on steel cover.
9.
Color-71: Almond porcelain enamel on steel cover.
10.
Finish-92: Bright finish on stainless steel cover.
11.
Finish-93: Satin finish on stainless steel cover.
E.
Electric Hand Dryers: Quick Drying - 20-25 Seconds, No Touch - Energy Efficient Operation, Dries Both Hands and Face, Decibel Level 60 dB-A at 2M.
 
** NOTE TO SPECIFIER ** Delete hand dryer not required.
 
1.
Product: 0141 PORCELAIR HAND DRYER by ASI (110-120 VAC 15 Amps).
2.
Product: 0144 PORCELAIR HAND DRYER by ASI (208-240 VAC 7.7-8.9 Amps).
3.
Compliance: Approved, listed by Underwriters Laboratories, Inc.
4.
Overall Dim: 9-7/16 in x 9-41/64 in x 6-3/8 in (162 mm x 245 mm x 200 mm).
5.
Electrical Specifications: Motor: 1/8 HP-3150 RPM - Brushless. Air Output: 142.4 CFM-Temp 127 deg F (53 deg C). Heater: 1704 Watts at 120 VAC. Current: 15 Amps at 120 VAC.
 
** NOTE TO SPECIFIER ** White is standard if no color is indicated. Delete color not required.
 
6.
Color: White epoxy enamel on cast aluminum cover.
7.
Color-40: Grey epoxy enamel on cast aluminum cover.
8.
Color-41: Black epoxy enamel on cast aluminum cover.
9.
Color-71: Almond epoxy enamel on cast aluminum cover.
F.
Electric Hand Dryers: Quick drying - less than 12 seconds, Operates automatically using IR sensor, Auto-resetting thermostat, 60-second automatic shut off, Decibel Level Min: 59dB-A at 2M Max: 72dB-A at 2M.
 
** NOTE TO SPECIFIER ** Delete hand dryer not required.
 
1.
Product: 0197-1 TURBO-DRI SURFACE-MOUNTED HIGH-SPEED AUTOMATIC HAND DRYER by ASI. 120 VAC, 50/60 Hz. 1.6 kW.
2.
Product: 0197-2 TURBO-DRI SURFACE-MOUNTED HIGH-SPEED AUTOMATIC HAND DRYER by ASI. 240 VAC, 50/60 Hz. 1.6 kW.
3.
Product: 0197-1 (0119) TURBO-DRI SEMI-RECESSED-MOUNTED HIGH-SPEED AUTOMATIC HAND DRYER by ASI. 120 VAC, 50/60 Hz. 1.6 kW.
4.
Product: 0197-2 (0119) TURBO-DRI SEMI-RECESSED-MOUNTED HIGH-SPEED AUTOMATIC HAND DRYER by ASI. 240 VAC, 50/60 Hz. 1.6 kW.
5.
Compliance: Approved, listed by Underwriters Laboratories, Inc (C-UL-US) CE, TUV.
 
** NOTE TO SPECIFIER ** Delete surface mounting dimensions if not required.
 
6.
Overall Dim: 11-9/16 in H x 8-1/16 in W x 7-5/64 in D (287 mm x 205 mm x 180 mm).
 
** NOTE TO SPECIFIER ** Delete semi-recessed mounting box if not required.
 
7.
Overall Dim: Semi-Recessing mounting box reduces projection of TurboDri dryer (surface mount) to less than 4 in (102 mm) from wall face for ADAAG and CalDAG Barrier Free Compliance. Cover fabricated with finish to match dryer finish; 17 in H x 12 in W x 3-1/4 in D (432 mm x 305 mm x 83 mm).
8.
Motor: 1 HP, 7k-18k rpm, adjustable, brush type, dual ball bearings. Voltage: 120 VAC, 50/60 Hz; 240 VAC, 50/60 Hz. 1.6 kW. Air Output: 68 CFM - Temp: 140 deg F (60 deg C). Heater: 400 - 900 Watts. Current: 14.6 Amps at 120 VAC; 7.3 AMPS at 240 VAC. Dry Time: Under 12 Seconds.
 
** NOTE TO SPECIFIER ** White is standard if no color is indicated. Delete finish not required.
 
9.
Finish: White porcelain enamel on formed steel cover.
10.
Finish-92: Bright finish on stainless steel cover.
11.
Finish-93: Satin finish on stainless steel cover.
G.
Electric Hand Dryers: Quick drying - less than 15 seconds, Operates automatically using IR sensor, Auto-resetting thermostat, 60-second auto shut off, Decibel Level 69 dB-A at 2M.
 
** NOTE TO SPECIFIER ** Delete hand dryer not required.
 
1.
Product: 0198-1 TURBO-DRI JR. SURFACE-MOUNTED HIGH-SPEED AUTOMATIC HAND DRYER by ASI. 120 VAC, 50/60 Hz. 1.0 kW.
2.
Product: 0198-2 TURBO-DRI JR. SURFACE-MOUNTED HIGH-SPEED AUTOMATIC HAND DRYER by ASI. 240 VAC, 50/60 Hz. 1.0 kW.
3.
Cover: One piece formed steel cover 0.047 in (1.2 mm) thick.
4.
Compliance: Approved, listed by Underwriters Laboratories, Inc (C-UL-US) CE, TUV.
5.
Overall Dim: 6-5/8 in H x 9-25/32 in W x 5-13/32 in D (168 mm x 248 mm x 137 mm).
6.
Motor: 0.67 HP, 29k rpm, adjustable, brush type, dual ball bearings. Air Output: 60 CFM - Temp: 131 deg F (55 deg C). Heater: 500 Watts. Current: 8.3 Amps at 120 VAC; 4.2 AMPS at 240 VAC. Dry Time: Under 15 Seconds.
 
** NOTE TO SPECIFIER ** White is standard if no color is indicated. Delete finish not required.
 
7.
Finish: White porcelain enamel on formed steel cover.
8.
Finish-92: Bright finish on stainless steel cover.
9.
Finish-93: Satin finish on stainless steel cover.
H.
Electric Hand Dryers: Recessed high speed hand dryer - less than 15 seconds, Operates automatically using IR sensor, Auto-resetting thermostat, 60-second auto shut off, Decibel Level 69 dB-A at 2M.
 
** NOTE TO SPECIFIER ** Delete hand dryer not required.
 
1.
Product: 20199-1 RECESSED HIGH-SPEED AUTOMATIC HAND DRYER by ASI. 120 VAC, 50/60 Hz. 1.0 kW.
2.
Product: 20199-2 RECESSED HIGH-SPEED AUTOMATIC HAND DRYER by ASI. 240 VAC, 50/60 Hz. 1.0 kW.
3.
Cover: One piece formed steel cover 0.047 in (1.2 mm) thick.
4.
Compliance: Approved, listed by Underwriters Laboratories, Inc (C-UL-US) CE, TUV.
5.
Overall Dim: 6-5/8 in H x 9-25/32 in W x 5-13/32 in D (168 mm x 248 mm x 137 mm).
6.
Motor: 0.67 HP, 29k rpm, adjustable, brush type, dual ball bearings. Air Output: 60 CFM - Temp: 131 deg F (55 deg C). Heater: 500 Watts. Current: 8.3 Amps at 120 VAC; 4.2 AMPS at 240 VAC. Dry Time: Under 15 Seconds.
 
** NOTE TO SPECIFIER ** White is standard if no color is indicated. Delete finish not required.
 
7.
Finish: White porcelain enamel on formed steel cover.
8.
Finish-92: Bright finish on stainless steel cover.
9.
Finish-93: Satin finish on stainless steel cover.
I.
Electric Hand Dryers: Surface mounted 4 in (102 mm) deep ADA dryers, Quick Drying - Under 25 Seconds, No Touch - Energy Efficient Operation, Universal Voltage - Automatically Adjusts to Voltages, Modern Design and Durable, Decibel Level 63 dB-A at 2M.
 
** NOTE TO SPECIFIER ** Delete hand dryer not required.
 
1.
Product: 0185 ROVAL STEEL COVER WITH PORCELAIN ENAMEL by ASI.
2.
Product: 0185 ROVAL STAINLESS COVER WITH MECHANICAL FINISH by ASI.
3.
Product: 0195 ROVAL CAST-IRON COVER WITH PORCELAIN ENAMEL by ASI.
4.
Compliance: Approved, listed by Underwriters Laboratories, Inc.
5.
Overall Dim: ADA compliant, 11-1/4 in x 15 in x 4 in (290 mm x 385 mm x 100 mm).
6.
Motor: 1/4 HP - 7500 RPM - Brush Type. Voltage: 100-240 - 50/60 Hz. Air Output: 186 CFM - Temp: 149 deg F (65 deg C). Heater: 1857 Watts at 115 VAC. Current: 17.6 Amps at 115 VAC.
 
** NOTE TO SPECIFIER ** White is standard if no color is indicated. Delete color/finishes not required.
 
7.
Color: White porcelain enamel finish on steel cover.
8.
Color-40: Grey porcelain enamel finish on steel cover.
9.
Color-41: Black porcelain enamel finish on steel cover.
10.
Color-71: Almond porcelain enamel finish on steel cover.
11.
Finish-92: Bright finish on stainless steel cover.
12.
Finish-93: Satin finish on stainless steel cover.
J.
Electric Hand Dryers: Surface mounted 3-5/16 inch (100 mm) deep ADA dryer, Quick Drying - Less than 15 seconds, No Touch - Energy Efficient Operation. Decibel level 68.9 dB-A min @ 2m, 74.3 dB-A max 2M, adjustable by Owner.
 
** NOTE TO SPECIFIER ** Delete hand dryers not required.
 
1.
Product: 0199-1, 120 VAC, 50/60 Hz, 1.0kW by ASI.
2.
Product: 0199-2, 240 VAC, 50/60 Hz, 1.0kW by ASI.
3.
Product: 0199-3, 277 VAC, 60 Hz, 1.0kW by ASI.
4.
Overall Dim: ADA compliant,10-41/64 inch (270.4 mm) x 8-1/2 inches (216 mm) x 3-15/16 inch (100 mm).
5.
Motor: 0.67 HP, 16-29 krpm, adjustable, brush type, dual ball bearings.
 
** NOTE TO SPECIFIER ** White is standard if no color is indicated. Delete color/finishes not required.
 
6.
Color: White porcelain enamel finish on steel cover.
7.
Finish-92: Bright finish on stainless steel cover.
8.
Finish-93: Satin finish on stainless steel cover.
K.
Electric Hand Dryers: Surface mounted ADA dryers, Quick Drying - Under 15 Seconds, No Touch - Energy Efficient Operation, Modern Design and Durable, Decibel Level 67 to 69.8 dB-A at 2M.
 
** NOTE TO SPECIFIER ** Delete hand dryer not required.
 
1.
Product: 20200 ROVAL TRI-Umph ABS PLASTIC WITH ANTI-MICROBIAL AGENT by ASI.
 
** NOTE TO SPECIFIER ** Delete models not required.
 
a.
Model 20200-1: 110-120 volts, 50/60 Hz, 10.0 Amps, 1200 watts.
b.
Model 20200-2: 208-240 volts, 50/60 Hz, 5.0 Amps, 1200 watts.
c.
Model 20200-3: 277 volts, 50/60 Hz, 5.0 Amps, 1200 watts.
2.
Compliance: Approved, listed by Underwriters Laboratories, Inc.
3.
Overall Dim: ADA compliant, 12-11/16 in x 22-1/16 in x 7-11/16 in projection (322 mm x 560 mm x 195 mm).
4.
Motor: Brush type dual ball bearings.
5.
Air Flow: 55-76 CMF (89-124 cubic meters) per hour.
PART 3 EXECUTION
 
3.1
EXAMINATION
A.
Inspect and prepare substrates using the methods recommended by the manufacturer for achieving best result for the substrates under project conditions.
1.
Verify reinforcement and anchoring devices are correct type and are located in accordance with shop drawings.
B.
Do not proceed with installation until substrates have been prepared using the methods recommended by the manufacturer and deviations from manufacturer's recommended tolerances are corrected. Commencement of installation constitutes acceptance of conditions.
C.
If preparation is the responsibility of another installer, notify Architect in writing of deviations from manufacturer's recommended installation tolerances and conditions.
3.2
INSTALLATION
A.
Install toilet accessories plumb and level in accordance with shop Drawings and manufacturer's printed installation instructions.
B.
Locate toilet accessories at heights and locations required for compliance with local accessibility regulations and the Americans with Disabilities Act.
3.3
CLEANING
A.
Remove manufacturer's protective vinyl coating from sight-exposed surfaces 24 hours before final inspection.
B.
Clean surfaces in accordance with manufacturer's recommendations.
3.4
PROTECTION OF INSTALLED PRODUCTS
A.
Protect products from damage caused by subsequent construction activities.
B.
Field repair of damaged product finishes is prohibited; replace products having damaged finishes caused by subsequent construction activities.
END OF SECTION