Download SECTION 10 71 13.13 EXTERIOR SHUTTERS for
WORD | RTF | Text | Word Perfect
Find over 500 more CSI Sections
on Arcat.com
Switch to Masterformat 95
 
SECTION 10 71 13.13
EXTERIOR SHUTTERS
 
 
Copyright 2013 - 2017 ARCAT, Inc. - All rights reserved
** NOTE TO SPECIFIER ** Timberlane, Inc.; exterior shutters and hardware.
This section is based on the products of Timberlane, Inc., which is located at:
150 Domorah Dr.
Montgomeryville, PA 18936
Toll Free Tel: 800-250-2221
Tel: 215-616-0600
Fax: 215-616-0753
Email: request info (sales@timberlane.com)
Web: www.timberlane.com
[ Click Here ] for additional information.
Timberlane manufactures the world's finest exterior shutters and hand-forged shutter hardware. Timberlane shutters are available in three materials: Western Red Cedar - for tradition and natural beauty, Mahogany - a luxurious wood that looks beautiful stained or painted and maintenance-free Endurian - a 21st century approach to the classic exterior wood shutter. Endurian shutters look exactly like their wood counterparts but will not rot and are totally resistant to insects.
 
PART 1 GENERAL
 
1.1
SECTION INCLUDES
 
** NOTE TO SPECIFIER ** Delete items below not required for project.
 
A.
Wood exterior shutters. (Premium Series)
B.
Composite exterior shutters. (Endurian Series)
C.
Fiberglass exterior shutters (Supremity Series)
D.
Composite wood exterior shutters (Fundamental Series)
E.
Planter Boxes (Timberlane Home Collection)
1.2
RELATED SECTIONS
 
** NOTE TO SPECIFIER ** Delete any sections below not relevant for elevator products; add others as required.
 
A.
Section 06 10 00 - Rough Carpentry.
B.
Section 06 20 00 - Finish Carpentry.
C.
Section 07 26 23 - Below-Grade Gas Retarders .
D.
Section 09 90 00 - Painting and Coating.
E.
Section 26 05 00 - Common Work Results for Electrical.
1.3
SUBMITTALS
A.
Submit under provisions of Section 01 30 00 - Administrative Requirements.
B.
Product Data: Manufacturer's data sheets and detail drawings for each product to be used, including:
1.
Preparation instructions and recommendations.
2.
Storage and handling requirements and recommendations.
3.
Product literature.
4.
Installation methods.
1.4
QUALITY ASSURANCE
A.
Single Source Requirements: To the greatest extent practical provide shutter and installation accessories as supplied by a single manufacturer.
1.5
DELIVERY, STORAGE, AND HANDLING
A.
Deliver, store and handle materials and products in strict compliance with manufacturer's instructions and recommendations and industry standards.
B.
Store products indoors in manufacturer's or fabricator's original containers and packaging, with labels clearly identifying product name and manufacturer. Protect from damage.
1.6
PROJECT CONDITIONS
A.
Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install systems under environmental conditions outside manufacturer's recommended limits.
B.
WARRANTY
C.
Manufacturer's Standard Limited Warranty:
 
** NOTE TO SPECIFIER ** Delete warranty options not required.
 
1.
For Hardware: 1 year for materials and workmanship
2.
For Supremity Series Shutters:
a.
Material and Workmanship: Lifetime.
b.
Finish: 10years, prorated.
3.
For Endurian Series Shutters:
a.
Materials and Workmanship: Lifetime.
b.
Finish: 10 years, prorated.
4.
For Premium Wood Shutters:
a.
Materials and Workmanship: 5 years prorated
b.
Finish: 3 years
5.
For Fundamentals Series Shutters
a.
Materials and Workmanship: 3 years prorated
b.
Finish: 1 year
6.
For Home Collection Planters.
a.
Materials and Workmanship: 5 years
b.
Finish: 5 years prorated
PART 2 PRODUCTS
 
2.1
MANUFACTURERS
A.
Acceptable Manufacturer: Timberlane, Inc., which is located at: 150 Domorah Dr.; Montgomeryville, PA 18936; Toll Free Tel: 800-250-2221; Tel: 215-616-0600; Fax: 215-616-0753; Email: request info (sales@timberlane.com); Web: www.timberlane.com
 
** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.
 
B.
Substitutions: Not permitted.
C.
Requests for substitutions will be considered in accordance with provisions of Section 01 60 00 - Product Requirements.
 
** NOTE TO SPECIFIER ** Not compatible with decorative hardware. Delete if not required.
 
2.2
WOOD EXTERIOR SHUTTERS (PREMIUM SERIES)
A.
Shutters: Premium Series Wood Exterior Shutters as manufactured Timberlane, Inc.
 
** NOTE TO SPECIFIER ** Delete shutter styles not required.
 
1.
Shutter Style: Paneled Shutters, CB1 Raised Panel.
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 5050 Overlap Rabbetting.
b.
Provide Optional Shutter Feature: 8650 Beading - 1/4 inch (Small).
c.
Provide Optional Shutter Feature: 8651 Beading - 3/8 inch (Large).
d.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
e.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
f.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
 
** NOTE TO SPECIFIER ** Fill in blank below with thickness from 1-3/8 inches to 1-3/4 inches.
 
g.
Provide Optional Shutter Feature: 9175 Custom Thickness ________.
h.
Provide Optional Shutter Feature: 1350 Cut Out.
i.
Provide Optional Shutter Feature: 1351 Custom Cut Out Template.
j.
Provide Optional Shutter Feature: 9250 Flush Back Panel.
k.
Provide Optional Shutter Feature: 1425 Inside Chase Beading.
l.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
m.
Provide Optional Shutter Feature: RFT Flex Trim without Shoulder Rail.
n.
Provide Optional Shutter Feature: RFT-S Flex Trim W/ Shoulder Rail.
2.
Shutter Style: Paneled Shutters, SH1 Raised Panel.
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 5050 Overlap Rabbetting.
b.
Provide Optional Shutter Feature: 8650 Beading- 1/4 inch (Small).
c.
Provide Optional Shutter Feature: 8651 Beading- 3/8 inch (Large).
d.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
e.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
f.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
 
** NOTE TO SPECIFIER ** Fill in blank below with thickness from 1-3/8 inches to 1-3/4 inches.
 
g.
Provide Optional Shutter Feature: 9175 Custom Thickness ________.
h.
Provide Optional Shutter Feature: 1350 Cut Out.
i.
Provide Optional Shutter Feature: 1351 Custom Cut Out Template.
j.
Provide Optional Shutter Feature: 9250 Flush Back Panel.
k.
Provide Optional Shutter Feature: 1425 Inside Chase Beading.
l.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
m.
Provide Optional Shutter Feature: R5 Profiled Panel without Shoulder Rail.
n.
Provide Optional Shutter Feature: R5-S Profiled Panel with Shoulder Rail.
3.
Shutter Style: Paneled Shutters, SH2 Raised Panel.
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 5050 Overlap Rabbetting.
b.
Provide Optional Shutter Feature: 8650 Beading - 1/4 inch (Small).
c.
Provide Optional Shutter Feature: 8651 Beading - 3/8 inch (Large).
d.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
e.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
f.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
 
** NOTE TO SPECIFIER ** Fill in blank below with thickness from 1-3/8 inches to 1-3/4 inches.
 
g.
Provide Optional Shutter Feature: 9175 Custom Thickness ________.
h.
Provide Optional Shutter Feature: 1350 Cut Out.
i.
Provide Optional Shutter Feature: 1351 Custom Cut Out Template.
j.
Provide Optional Shutter Feature: 9250 Flush Back Panel.
k.
Provide Optional Shutter Feature: 1425 Inside Chase Beading.
l.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
m.
Provide Optional Shutter Feature: RFT Flex Trim without Shoulder Rail.
n.
Provide Optional Shutter Feature: RFT-S Flex Trim W/ Shoulder Rail.
4.
Shutter Style: Paneled Shutters, SH3 Raised Panel.
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 5050 Overlap Rabbetting.
b.
Provide Optional Shutter Feature: 8650 Beading - 1/4 inch (Small).
c.
Provide Optional Shutter Feature: 8651 Beading - 3/8 inch (Large).
d.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
e.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
f.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
 
** NOTE TO SPECIFIER ** Fill in blank below with thickness from 1-3/8 inches to 1-3/4 inches.
 
g.
Provide Optional Shutter Feature: 9175 Custom Thickness ________.
h.
Provide Optional Shutter Feature: 1350 Cut Out.
i.
Provide Optional Shutter Feature: 1351 Custom Cut Out Template.
j.
Provide Optional Shutter Feature: 9250 Flush Back Panel.
k.
Provide Optional Shutter Feature: 1425 Inside Chase Beading.
l.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
m.
Provide Optional Shutter Feature: RFT Flex Trim without Shoulder Rail.
n.
Provide Optional Shutter Feature: RFT-S Flex Trim W/ Shoulder Rail.
5.
Shutter Style: Paneled Shutters, CT1 Raised Panel.
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 5050 Overlap Rabbetting.
b.
Provide Optional Shutter Feature: 8650 Beading - 1/4 inch (Small).
c.
Provide Optional Shutter Feature: 8651 Beading - 3/8 inch (Large).
d.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
e.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
f.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
 
** NOTE TO SPECIFIER ** Fill in blank below with thickness from 1-3/8 inches to 1-3/4 inches.
 
g.
Provide Optional Shutter Feature: 9175 Custom Thickness ________.
h.
Provide Optional Shutter Feature: 1350 Cut Out.
i.
Provide Optional Shutter Feature: 1351 Custom Cut Out Template.
j.
Provide Optional Shutter Feature: 9250 Flush Back Panel.
k.
Provide Optional Shutter Feature: 1425 Inside Chase Beading.
l.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
m.
Provide Optional Shutter Feature: RFT Flex Trim without Shoulder Rail.
n.
Provide Optional Shutter Feature: RFT-S Flex Trim W/ Shoulder Rail.
6.
Shutter Style: Paneled Shutters, CT3 Raised Panel.
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 5050 Overlap Rabbetting.
b.
Provide Optional Shutter Feature: 8650 Beading - 1/4 inch (Small).
c.
Provide Optional Shutter Feature: 8651 Beading - 3/8 inch (Large).
d.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
e.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
f.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
 
** NOTE TO SPECIFIER ** Fill in blank below with thickness from 1-3/8 inches to 1-3/4 inches.
 
g.
Provide Optional Shutter Feature: 9175 Custom Thickness ________.
h.
Provide Optional Shutter Feature: 1350 Cut Out.
i.
Provide Optional Shutter Feature: 1351 Custom Cut Out Template.
j.
Provide Optional Shutter Feature: 9250 Flush Back Panel.
k.
Provide Optional Shutter Feature: 1425 Inside Chase Beading.
l.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
m.
Provide Optional Shutter Feature: RFT Flex Trim without Shoulder Rail.
n.
Provide Optional Shutter Feature: RFT-S Flex Trim W/ Shoulder Rail.
7.
Shutter Style: Paneled Shutters, UB1 Raised Panel.
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 5050 Overlap Rabbetting.
b.
Provide Optional Shutter Feature: 8650 Beading - 1/4 inch (Small).
c.
Provide Optional Shutter Feature: 8651 Beading - 3/8 inch (Large).
d.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
e.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
f.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
 
** NOTE TO SPECIFIER ** Fill in blank below with thickness from 1-3/8 inches to 1-3/4 inches.
 
g.
Provide Optional Shutter Feature: 9175 Custom Thickness ________.
h.
Provide Optional Shutter Feature: 1350 Cut Out.
i.
Provide Optional Shutter Feature: 1351 Custom Cut Out Template.
j.
Provide Optional Shutter Feature: 1425 Inside Chase Beading.
k.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
8.
Shutter Style: Paneled Shutters, FP6 Flat Panel.
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 5050 Overlap Rabbetting.
b.
Provide Optional Shutter Feature: 8650 Beading - 1/4 inch (Small).
c.
Provide Optional Shutter Feature: 8651 Beading - 3/8 inch (Large).
d.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
e.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
f.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
 
** NOTE TO SPECIFIER ** Fill in blank below with thickness from 1-3/8 inches to 1-3/4 inches.
 
g.
Provide Optional Shutter Feature: 9175 Custom Thickness ________.
h.
Provide Optional Shutter Feature: 1350 Cut Out.
i.
Provide Optional Shutter Feature: 1351 Custom Cut Out Template.
j.
Provide Optional Shutter Feature: 9250 Flush Back Panel.
k.
Provide Optional Shutter Feature: 1425 Inside Chase Beading.
9.
Shutter Style: Paneled Shutters, FP7 Flat Panel.
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 5050 Overlap Rabbetting.
b.
Provide Optional Shutter Feature: 8650 Beading - 1/4 inch (Small).
c.
Provide Optional Shutter Feature: 8651 Beading - 3/8 inch (Large).
d.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
e.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
f.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
 
** NOTE TO SPECIFIER ** Fill in blank below with thickness from 1-3/8 inches to 1-3/4 inches.
 
g.
Provide Optional Shutter Feature: 9175 Custom Thickness ________.
h.
Provide Optional Shutter Feature: 1350 Cut Out.
i.
Provide Optional Shutter Feature: 1351 Custom Cut Out Template.
j.
Provide Optional Shutter Feature: 1425 Inside Chase Beading.
k.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
10.
Shutter Style: Paneled Shutters, CT2 Raised Panel.
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 5050 Overlap Rabbetting.
b.
Provide Optional Shutter Feature: 8650 Beading - 1/4 inch (Small).
c.
Provide Optional Shutter Feature: 8651 Beading - 3/8 inch (Large).
d.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
e.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
f.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
 
** NOTE TO SPECIFIER ** Fill in blank below with thickness from 1-3/8 inches to 1-3/4 inches.
 
g.
Provide Optional Shutter Feature: 9175 Custom Thickness ________.
h.
Provide Optional Shutter Feature: 1350 Cut Out.
i.
Provide Optional Shutter Feature: 1351 Custom Cut Out Template.
j.
Provide Optional Shutter Feature: 9250 Flush Back Panel.
k.
Provide Optional Shutter Feature: 1425 Inside Chase Beading.
l.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
m.
Provide Optional Shutter Feature: RFT Flex Trim without Shoulder Rail.
n.
Provide Optional Shutter Feature: RFT-S Flex Trim W/ Shoulder Rail.
11.
Shutter Style: Paneled Shutters, VGV "V" Groove Panel.
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 5050 Overlap Rabbetting.
b.
Provide Optional Shutter Feature: 8650 Beading - 1/4 inch (Small).
c.
Provide Optional Shutter Feature: 8651 Beading - 3/8 inch (Large).
d.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
e.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
f.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
 
** NOTE TO SPECIFIER ** Fill in blank below with thickness from 1-3/8 inches to 1-3/4 inches.
 
g.
Provide Optional Shutter Feature: 9175 Custom Thickness ________.
h.
Provide Optional Shutter Feature: 1350 Cut Out.
i.
Provide Optional Shutter Feature: 1351 Custom Cut Out Template.
j.
Provide Optional Shutter Feature: 1425 Inside Chase Beading.
k.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
l.
Provide Optional Shutter Feature: R5 Profiled Panel without Shoulder Rail.
m.
Provide Optional Shutter Feature: R5-S Profiled Panel with Shoulder Rail.
n.
Provide Optional Shutter Feature: R6 Flat Panel without Shoulder Rail.
o.
Provide Optional Shutter Feature: R6-S Flat Panel with Shoulder Rail.
12.
Shutter Style: Paneled Shutters, VGD "V" Groove Panel.
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 5050 Overlap Rabbetting.
b.
Provide Optional Shutter Feature: 8650 Beading - 1/4 inch (Small).
c.
Provide Optional Shutter Feature: 8651 Beading - 3/8 inch (Large).
d.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
e.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
f.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
 
** NOTE TO SPECIFIER ** Fill in blank below with thickness from 1-3/8 inches to 1-3/4 inches.
 
g.
Provide Optional Shutter Feature: 9175 Custom Thickness ________.
h.
Provide Optional Shutter Feature: 1350 Cut Out.
i.
Provide Optional Shutter Feature: 1351 Custom Cut Out Template.
j.
Provide Optional Shutter Feature: 1425 Inside Chase Beading.
k.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
l.
Provide Optional Shutter Feature: R5 Profiled Panel without Shoulder Rail.
m.
Provide Optional Shutter Feature: R5-S Profiled Panel with Shoulder Rail.
n.
Provide Optional Shutter Feature: R6 Flat Panel without Shoulder Rail.
o.
Provide Optional Shutter Feature: R6-S Flat Panel with Shoulder Rail.
13.
Shutter Style: Paneled Shutters, FP1 Flat Panel.
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 5050 Overlap Rabbetting.
b.
Provide Optional Shutter Feature: 8650 Beading - 1/4 inch (Small).
c.
Provide Optional Shutter Feature: 8651 Beading - 3/8 inch (Large).
d.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
e.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
f.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
 
** NOTE TO SPECIFIER ** Fill in blank below with thickness from 1-3/8 inches to 1-3/4 inches.
 
g.
Provide Optional Shutter Feature: 9175 Custom Thickness ________.
h.
Provide Optional Shutter Feature: 1350 Cut Out.
i.
Provide Optional Shutter Feature: 1351 Custom Cut Out Template.
j.
Provide Optional Shutter Feature: 1425 Inside Chase Beading.
k.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
14.
Shutter Style: Paneled Shutters, FP2 Flat Panel.
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 5050 Overlap Rabbetting.
b.
Provide Optional Shutter Feature: 8650 Beading - 1/4 inch (Small).
c.
Provide Optional Shutter Feature: 8651 Beading - 3/8 inch (Large).
d.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
e.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
f.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
 
** NOTE TO SPECIFIER ** Fill in blank below with thickness from 1-3/8 inches to 1-3/4 inches.
 
g.
Provide Optional Shutter Feature: 9175 Custom Thickness ________.
h.
Provide Optional Shutter Feature: 1350 Cut Out.
i.
Provide Optional Shutter Feature: 1351 Custom Cut Out Template.
j.
Provide Optional Shutter Feature: 1425 Inside Chase Beading.
k.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
l.
Provide Optional Shutter Feature: R6 Flat Panel without Shoulder Rail.
m.
Provide Optional Shutter Feature: R6-S Flat Panel with Shoulder Rail.
n.
Provide Optional Shutter Feature: RFT Flex Trim without Shoulder Rail.
o.
Provide Optional Shutter Feature: RFT-S Flex Trim W/ Shoulder Rail.
15.
Shutter Style: Paneled Shutters, FP3 Flat Panel.
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 5050 Overlap Rabbetting.
b.
Provide Optional Shutter Feature: 8650 Beading - 1/4 inch (Small).
c.
Provide Optional Shutter Feature: 8651 Beading - 3/8 inch (Large).
d.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
e.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
f.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
 
** NOTE TO SPECIFIER ** Fill in blank below with thickness from 1-3/8 inches to 1-3/4 inches.
 
g.
Provide Optional Shutter Feature: 9175 Custom Thickness ________.
h.
Provide Optional Shutter Feature: 1350 Cut Out.
i.
Provide Optional Shutter Feature: 1351 Custom Cut Out Template.
j.
Provide Optional Shutter Feature: 1425 Inside Chase Beading.
k.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
l.
Provide Optional Shutter Feature: R5 Profiled Panel without Shoulder Rail.
m.
Provide Optional Shutter Feature: R5-S Profiled Panel with Shoulder Rail.
n.
Provide Optional Shutter Feature: R6 Flat Panel without Shoulder Rail.
o.
Provide Optional Shutter Feature: R6-S Flat Panel with Shoulder Rail.
16.
Shutter Style: Paneled Shutters, FP4 Flat Panel.
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 5050 Overlap Rabbetting.
b.
Provide Optional Shutter Feature: 8650 Beading - 1/4 inch (Small).
c.
Provide Optional Shutter Feature: 8651 Beading - 3/8 inch (Large).
d.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
e.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
f.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
 
** NOTE TO SPECIFIER ** Fill in blank below with thickness from 1-3/8 inches to 1-3/4 inches.
 
g.
Provide Optional Shutter Feature: 9175 Custom Thickness ________.
h.
Provide Optional Shutter Feature: 1350 Cut Out.
i.
Provide Optional Shutter Feature: 1351 Custom Cut Out Template.
j.
Provide Optional Shutter Feature: 1425 Inside Chase Beading.
k.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
l.
Provide Optional Shutter Feature: R6 Flat Panel without Shoulder Rail.
m.
Provide Optional Shutter Feature: R6-S Flat Panel with Shoulder Rail.
n.
Provide Optional Shutter Feature: RFT Flex Trim without Shoulder Rail.
o.
Provide Optional Shutter Feature: RFT-S Flex Trim W/ Shoulder Rail.
17.
Shutter Style: Paneled Shutters, FP5 Flat Panel.
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 5050 Overlap Rabbetting.
b.
Provide Optional Shutter Feature: 8650 Beading - 1/4 inch (Small).
c.
Provide Optional Shutter Feature: 8651 Beading - 3/8 inch (Large).
d.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
e.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
f.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
 
** NOTE TO SPECIFIER ** Fill in blank below with thickness from 1-3/8 inches to 1-3/4 inches.
 
g.
Provide Optional Shutter Feature: 9175 Custom Thickness ________.
h.
Provide Optional Shutter Feature: 1350 Cut Out.
i.
Provide Optional Shutter Feature: 1351 Custom Cut Out Template.
j.
Provide Optional Shutter Feature: 1425 Inside Chase Beading.
k.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
l.
Provide Optional Shutter Feature: R6 Flat Panel without Shoulder Rail.
m.
Provide Optional Shutter Feature: R6-S Flat Panel with Shoulder Rail.
n.
Provide Optional Shutter Feature: RFT Flex Trim without Shoulder Rail.
o.
Provide Optional Shutter Feature: RFT-S Flex Trim W/ Shoulder Rail.
18.
Shutter Style: Paneled Shutters, FP6 Flat Panel.
 
** NOTE TO SPECIFIER ** Delete optional shutter feature if not required.
 
a.
Provide Optional Shutter Feature: 5050 Overlap Rabbetting.
b.
Provide Optional Shutter Feature: 8650 Beading - 1/4 inch (Small).
c.
Provide Optional Shutter Feature: 8651 Beading - 3/8 inch (Large).
d.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
e.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
f.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
g.
Provide Optional Shutter Feature: 1350 Cut Out.
h.
Provide Optional Shutter Feature: 1351 Custom Cut Out Template.
i.
Provide Optional Shutter Feature: 1425 Inside Chase Beading.
j.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
19.
Shutter Style: Paneled Shutters, FP7 Flat Panel.
 
** NOTE TO SPECIFIER ** Delete optional shutter feature if not required.
 
a.
Provide Optional Shutter Feature: 5050 Overlap Rabbetting.
b.
Provide Optional Shutter Feature: 8650 Beading - 1/4 inch (Small).
c.
Provide Optional Shutter Feature: 8651 Beading - 3/8 inch (Large).
d.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
e.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
f.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
g.
Provide Optional Shutter Feature: 1350 Cut Out.
h.
Provide Optional Shutter Feature: 1351 Custom Cut Out Template.
i.
Provide Optional Shutter Feature: 1425 Inside Chase Beading.
j.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
20.
Shutter Style: Paneled Shutters, CT4 Flat Panel.
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 5050 Overlap Rabbetting.
b.
Provide Optional Shutter Feature: 8650 Beading - 1/4 inch (Small).
c.
Provide Optional Shutter Feature: 8651 Beading - 3/8 inch (Large).
d.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
e.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
f.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
 
** NOTE TO SPECIFIER ** Fill in blank below with thickness from 1-3/8 inches to 1-3/4 inches.
 
g.
Provide Optional Shutter Feature: 9175 Custom Thickness ________.
h.
Provide Optional Shutter Feature: 1350 Cut Out.
i.
Provide Optional Shutter Feature: 1351 Custom Cut Out Template.
j.
Provide Optional Shutter Feature: 9250 Flush Back Panel.
k.
Provide Optional Shutter Feature: 1425 Inside Chase Beading.
l.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
m.
Provide Optional Shutter Feature: RFT Flex Trim without Shoulder Rail.
n.
Provide Optional Shutter Feature: RFT-S Flex Trim W/ Shoulder Rail.
21.
Shutter Style: Fixed Louver Shutters, LB1 1-3/8 inches Fixed Louver.
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 5050 Overlap Rabbetting.
b.
Provide Optional Shutter Feature: 8650 Beading- 1/4 inch (Small).
c.
Provide Optional Shutter Feature: 8651 Beading- 3/8 inch (Large).
d.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
e.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
f.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
 
** NOTE TO SPECIFIER ** Fill in blank below with thickness from 1-3/8 inches to 1-3/4 inches.
 
g.
Provide Optional Shutter Feature: 9175 Custom Thickness ________.
h.
Provide Optional Shutter Feature: 1250 Tilt Rod - 3/8 inch (Small).
i.
Provide Optional Shutter Feature: 1251 Tilt Rod - 1/2 inch (Large).
j.
Provide Optional Shutter Feature: 1425 Inside Chase Beading.
k.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
l.
Provide Optional Shutter Feature: R2 Radius Top - Sunburst.
m.
Provide Optional Shutter Feature: R3 Radius Top - Louvered without Shoulder Rail.
n.
Provide Optional Shutter Feature: R3-S Louvered with Shoulder Rail.
22.
Shutter Style: Fixed Louver Shutters, WL1 1-3/4 inches Fixed Louver.
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 5050 Overlap Rabbetting.
b.
Provide Optional Shutter Feature: 8650 Beading- 1/4 inch (Small).
c.
Provide Optional Shutter Feature: 8651 Beading- 3/8 inch (Large).
d.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
e.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
f.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
 
** NOTE TO SPECIFIER ** Fill in blank below with thickness from 1-3/8 inches to 1-3/4 inches.
 
g.
Provide Optional Shutter Feature: 9175 Custom Thickness ________.
h.
Provide Optional Shutter Feature: 1250 Tilt Rod - 3/8 inch (Small).
i.
Provide Optional Shutter Feature: 1251 Tilt Rod - 1/2 inch (Large).
j.
Provide Optional Shutter Feature: 1425 Inside Chase Beading.
k.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
l.
Provide Optional Shutter Feature: R2 Radius Top - Sunburst.
m.
Provide Optional Shutter Feature: R3 Radius Top - Louvered without Shoulder Rail.
n.
Provide Optional Shutter Feature: R3-S Louvered with Shoulder Rail.
23.
Shutter Style: Fixed Louver Shutters, WL2 1-3/4 inches Fixed Louver W/Trim.
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 5050 Overlap Rabbetting.
b.
Provide Optional Shutter Feature: 8650 Beading- 1/4 inch (Small).
c.
Provide Optional Shutter Feature: 8651 Beading- 3/8 inch (Large).
d.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
e.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
f.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
 
** NOTE TO SPECIFIER ** Fill in blank below with thickness from 1-3/8 inches to 1-3/4 inches.
 
g.
Provide Optional Shutter Feature: 9175 Custom Thickness ________.
h.
Provide Optional Shutter Feature: 1250 Tilt Rod - 3/8 inch (Small).
i.
Provide Optional Shutter Feature: 1251 Tilt Rod - 1/2 inch (Large).
j.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
24.
Shutter Style: Fixed Louver Shutters, SW1 2-1/2 inches Fixed Louver.
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 5050 Overlap Rabbetting.
b.
Provide Optional Shutter Feature: 8650 Beading- 1/4 inch (Small).
c.
Provide Optional Shutter Feature: 8651 Beading- 3/8 inch (Large).
d.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
e.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
f.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
 
** NOTE TO SPECIFIER ** Fill in blank below with thickness from 1-3/8 inches to 1-3/4 inches.
 
g.
Provide Optional Shutter Feature: 9175 Custom Thickness ________.
h.
Provide Optional Shutter Feature: 1250 Tilt Rod - 3/8 inch (Small).
i.
Provide Optional Shutter Feature: 1251 Tilt Rod - 1/2 inch (Large).
j.
Provide Optional Shutter Feature: 1425 Inside Chase Beading.
k.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
l.
Provide Optional Shutter Feature: R2 Radius Top - Sunburst.
m.
Provide Optional Shutter Feature: R3 Radius Top - Louvered without Shoulder Rail.
n.
Provide Optional Shutter Feature: R3-S Louvered with Shoulder Rail.
25.
Shutter Style: Fixed Louver Shutters, TR1 Thru Style Fixed Louver.
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 5050 Overlap Rabbetting.
b.
Provide Optional Shutter Feature: 8650 Beading- 1/4 inch (Small).
c.
Provide Optional Shutter Feature: 8651 Beading- 3/8 inch (Large).
d.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
e.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
f.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
 
** NOTE TO SPECIFIER ** Fill in blank below with thickness from 1-3/8 inches to 1-3/4 inches.
 
g.
Provide Optional Shutter Feature: 9175 Custom Thickness ________.
h.
Provide Optional Shutter Feature: 1250 Tilt Rod - 3/8 inch (Small).
i.
Provide Optional Shutter Feature: 1251 Tilt Rod - 1/2 inch (Large).
j.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
26.
Shutter Style: Fixed Louver Shutters, TR2 Thru Style Fixed Louver (without molding).
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 5050 Overlap Rabbetting.
b.
Provide Optional Shutter Feature: 8650 Beading- 1/4 inch (Small).
c.
Provide Optional Shutter Feature: 8651 Beading- 3/8 inch (Large).
d.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
e.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
f.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
g.
Provide Optional Shutter Feature: 1250 Tilt Rod - 3/8 inch (Small).
h.
Provide Optional Shutter Feature: 1251 Tilt Rod - 1/2 inch (Large).
i.
Provide Optional Shutter Feature: 1300 Mousehole.
j.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
27.
Shutter Style: Fixed Louver Shutters, NE1 New England Style Fixed Louver.
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 5050 Overlap Rabbetting.
b.
Provide Optional Shutter Feature: 8650 Beading- 1/4 inch (Small).
c.
Provide Optional Shutter Feature: 8651 Beading- 3/8 inch (Large).
d.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
e.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
f.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
 
** NOTE TO SPECIFIER ** Fill in blank below with thickness from 1-3/8 inches to 1-3/4 inches.
 
g.
Provide Optional Shutter Feature: 9175 Custom Thickness ________.
h.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
28.
Shutter Style: Operable Louvers, LBO 1-3/8 inches Louver.
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 5050 Overlap Rabbetting.
b.
Provide Optional Shutter Feature: 8650 Beading- 1/4 inch (Small).
c.
Provide Optional Shutter Feature: 8651 Beading- 3/8 inch (Large).
d.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
e.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
f.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
 
** NOTE TO SPECIFIER ** Fill in blank below with thickness from 1-3/8 inches to 1-3/4 inches.
 
g.
Provide Optional Shutter Feature: 9175 Custom Thickness ________.
h.
Provide Optional Shutter Feature: 1250 Tilt Rod - 3/8 inch (Small).
i.
Provide Optional Shutter Feature: 1251 Tilt Rod - 1/2 inch (Large).
j.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
29.
Shutter Style: Operable Louvers, WLO 1-3/4 inches Louver.
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 5050 Overlap Rabbetting.
b.
Provide Optional Shutter Feature: 8650 Beading- 1/4 inch (Small).
c.
Provide Optional Shutter Feature: 8651 Beading- 3/8 inch (Large).
d.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
e.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
f.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
 
** NOTE TO SPECIFIER ** Fill in blank below with thickness from 1-3/8 inches to 1-3/4 inches.
 
g.
Provide Optional Shutter Feature: 9175 Custom Thickness ________.
h.
Provide Optional Shutter Feature: 1250 Tilt Rod - 3/8 inch (Small).
i.
Provide Optional Shutter Feature: 1251 Tilt Rod - 1/2 inch (Large).
j.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
30.
Shutter Style: Operable Louvers, SWO 2-1/2 inches Louver.
a.
Provide Optional Shutter Feature: 5050 Overlap Rabbetting.
b.
Provide Optional Shutter Feature: 8650 Beading- 1/4 inch (Small).
c.
Provide Optional Shutter Feature: 8651 Beading- 3/8 inch (Large).
d.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
e.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
f.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
 
** NOTE TO SPECIFIER ** Fill in blank below with thickness from 1-3/8 inches to 1-3/4 inches.
 
g.
Provide Optional Shutter Feature: 9175 Custom Thickness ________.
h.
Provide Optional Shutter Feature: 1250 Tilt Rod - 3/8 inch (Small).
i.
Provide Optional Shutter Feature: 1251 Tilt Rod - 1/2 inch (Large).
j.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
 
** NOTE TO SPECIFIER ** Delete optional shutter feature if not required.
 
k.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
31.
Shutter Style: Board and Batten Shutters, BBP1 Board and Batten - Closed with Bead.
 
** NOTE TO SPECIFIER ** Fill in blank below with thickness from 1-3/8 inches to 1-3/4 inches. Delete optional shutter feature if not required.
 
a.
Provide Optional Shutter Feature: 9175 Custom Thickness ________.
b.
Provide Optional Shutter Feature: 1350 Cut Out.
c.
Provide Optional Shutter Feature: 1351 Custom Cut Out Template Charge.
d.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
32.
Shutter Style: Board and Batten Shutters, BBCV(BBC3) Board and Batten - "V" Groove-Vertical.
 
** NOTE TO SPECIFIER ** Fill in blank below with thickness from 1-3/8 inches to 1-3/4 inches. Delete optional shutter feature if not required.
 
a.
Provide Optional Shutter Feature: 9175 Custom Thickness ________.
b.
Provide Optional Shutter Feature: 1350 Cut Out.
c.
Provide Optional Shutter Feature: 1351 Custom Cut Out Template Charge.
d.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
33.
Shutter Style: Board and Batten Shutters, BBCD(BBO3) Board and Batten - "V" Groove-Diagonal.
 
** NOTE TO SPECIFIER ** Fill in blank below with thickness from 1-3/8 inches to 1-3/4 inches. Delete optional shutter feature if not required.
 
a.
Provide Optional Shutter Feature: 9175 Custom Thickness ________.
b.
Provide Optional Shutter Feature: 1350 Cut Out.
c.
Provide Optional Shutter Feature: 1351 Custom Cut Out Template Charge.
d.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
34.
Shutter Style: Board and Batten Shutters, BBO(BBO5) Board and Batten - Open.
 
** NOTE TO SPECIFIER ** Fill in blank below with thickness from 1-3/8 inches to 1-3/4 inches. Delete optional shutter feature if not required.
 
a.
Provide Optional Shutter Feature: 9175 Custom Thickness ________.
b.
Provide Optional Shutter Feature: 1350 Cut Out.
c.
Provide Optional Shutter Feature: 1351 Custom Cut Out Template Charge.
d.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
35.
Shutter Style: Bermuda Shutters, BS1 1-3/8 inches Fixed Louver.
 
** NOTE TO SPECIFIER ** Delete optional shutter feature if not required.
 
a.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
b.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
c.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
 
** NOTE TO SPECIFIER ** Fill in blank below with thickness from 1-3/8 inches to 1-3/4 inches.
 
d.
Provide Optional Shutter Feature: 9175 Custom Thickness ________.
e.
Provide Optional Shutter Feature: 1250 Tilt Rod - 3/8 inch (Small).
f.
Provide Optional Shutter Feature: 1251 Tilt Rod - 1/2 inch (Large).
g.
Provide Optional Shutter Feature: 1300 Mousehole.
h.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
i.
Provide Optional Shutter Feature: R2 Radius Top - Sunburst.
j.
Provide Optional Shutter Feature: R3 Radius Top - Louvered without Shoulder Rail.
k.
Provide Optional Shutter Feature: R3-S Louvered with Shoulder Rail.
36.
Shutter Style: Bermuda Shutters, BS2 1-3/4 inches Fixed Louver.
 
** NOTE TO SPECIFIER ** Delete optional shutter feature if not required.
 
a.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
b.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
c.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
 
** NOTE TO SPECIFIER ** Fill in blank below with thickness from 1-3/8 inches to 1-3/4 inches.
 
d.
Provide Optional Shutter Feature: 9175 Custom Thickness ________.
e.
Provide Optional Shutter Feature: 1250 Tilt Rod - 3/8 inch (Small).
f.
Provide Optional Shutter Feature: 1251 Tilt Rod - 1/2 inch (Large).
g.
Provide Optional Shutter Feature: 1300 Mousehole.
h.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
i.
Provide Optional Shutter Feature: R2 Radius Top - Sunburst.
j.
Provide Optional Shutter Feature: R3 Radius Top - Louvered without Shoulder Rail.
k.
Provide Optional Shutter Feature: R3-S Louvered with Shoulder Rail.
37.
Shutter Style: Bermuda Shutters, BS3 2-1/2 inches Fixed Louver.
 
** NOTE TO SPECIFIER ** Delete optional shutter feature if not required.
 
a.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
b.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
c.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
 
** NOTE TO SPECIFIER ** Fill in blank below with thickness from 1-3/8 inches to 1-3/4 inches.
 
d.
Provide Optional Shutter Feature: 9175 Custom Thickness ________.
e.
Provide Optional Shutter Feature: 1250 Tilt Rod - 3/8 inch (Small).
f.
Provide Optional Shutter Feature: 1251 Tilt Rod - 1/2 inch (Large).
g.
Provide Optional Shutter Feature: 1300 Mousehole.
h.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
i.
Provide Optional Shutter Feature: R2 Radius Top - Sunburst.
j.
Provide Optional Shutter Feature: R3 Radius Top - Louvered without Shoulder Rail.
k.
Provide Optional Shutter Feature: R3-S Louvered with Shoulder Rail.
38.
Shutter Style: Bermuda Shutters, BS4 1-3/4 inches Fixed Louver with Trim.
 
** NOTE TO SPECIFIER ** Delete optional shutter feature if not required.
 
a.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
b.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
c.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
 
** NOTE TO SPECIFIER ** Fill in blank below with thickness from 1-3/8 inches to 1-3/4 inches.
 
d.
Provide Optional Shutter Feature: 9175 Custom Thickness ________.
e.
Provide Optional Shutter Feature: 1250 Tilt Rod - 3/8 inch (Small).
f.
Provide Optional Shutter Feature: 1251 Tilt Rod - 1/2 inch (Large).
g.
Provide Optional Shutter Feature: 1300 Mousehole.
h.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
39.
Shutter Style: Bermuda Shutters, BS5 1-3/4 inches Fixed Louver with Trim.
 
** NOTE TO SPECIFIER ** Delete optional shutter feature if not required.
 
a.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
b.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
c.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
 
** NOTE TO SPECIFIER ** Fill in blank below with thickness from 1-3/8 inches to 1-3/4 inches.
 
d.
Provide Optional Shutter Feature: 9175 Custom Thickness ________.
e.
Provide Optional Shutter Feature: 1250 Tilt Rod - 3/8 inch (Small).
f.
Provide Optional Shutter Feature: 1251 Tilt Rod - 1/2 inch (Large).
g.
Provide Optional Shutter Feature: 1300 Mousehole.
h.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
40.
Shutter Style: Paneled Shutters, M1 Mission Style
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 5050 Overlap Rabbetting.
b.
Provide Optional Shutter Feature: 8650 Beading - 1/4 inch (Small).
c.
Provide Optional Shutter Feature: 8651 Beading - 3/8 inch (Large).
d.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
e.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
f.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
 
** NOTE TO SPECIFIER ** Fill in blank below with thickness from 1-3/8 inches to 1-3/4 inches.
 
g.
Provide Optional Shutter Feature: 9175 Custom Thickness ________.
h.
Provide Optional Shutter Feature: 1350 Cut Out.
i.
Provide Optional Shutter Feature: 1351 Custom Cut Out Template.
j.
Provide Optional Shutter Feature: 1425 Inside Chase Beading.
k.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
l.
Provide Optional Shutter Feature: R5 Profiled Panel without Shoulder Rail.
m.
Provide Optional Shutter Feature: R5-S Profiled Panel with Shoulder Rail.
n.
Provide Optional Shutter Feature: R6 Flat Panel without Shoulder Rail.
o.
Provide Optional Shutter Feature: R6-S Flat Panel with Shoulder Rail.
41.
Shutter Style: Paneled Shutters, M2 Mission Style
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 5050 Overlap Rabbetting.
b.
Provide Optional Shutter Feature: 8650 Beading - 1/4 inch (Small).
c.
Provide Optional Shutter Feature: 8651 Beading - 3/8 inch (Large).
d.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
e.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
f.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
 
** NOTE TO SPECIFIER ** Fill in blank below with thickness from 1-3/8 inches to 1-3/4 inches.
 
g.
Provide Optional Shutter Feature: 9175 Custom Thickness ________.
h.
Provide Optional Shutter Feature: 1350 Cut Out.(#164 Standard)
i.
Provide Optional Shutter Feature: 1351 Custom Cut Out Template.
j.
Provide Optional Shutter Feature: 1425 Inside Chase Beading.
k.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
l.
Provide Optional Shutter Feature: R5 Profiled Panel without Shoulder Rail.
m.
Provide Optional Shutter Feature: R5-S Profiled Panel with Shoulder Rail.
n.
Provide Optional Shutter Feature: R6 Flat Panel without Shoulder Rail.
o.
Provide Optional Shutter Feature: R6-S Flat Panel with Shoulder Rail.
42.
Shutter Style: Paneled Shutters, M3 Mission Breadboard Style
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
** NOTE TO SPECIFIER ** Fill in blank below with thickness from 1-3/8 inches to 1-3/4 inches.
 
a.
Provide Optional Shutter Feature: 9175 Custom Thickness ________.
b.
Provide Optional Shutter Feature: 1350 Cut Out.
c.
Provide Optional Shutter Feature: 1351 Custom Cut Out Template.
d.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
43.
Shutter Style: Paneled Shutters, M4 Mission Style
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 5050 Overlap Rabbetting.
b.
Provide Optional Shutter Feature: 8650 Beading - 1/4 inch (Small).
c.
Provide Optional Shutter Feature: 8651 Beading - 3/8 inch (Large).
d.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
e.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
f.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
 
** NOTE TO SPECIFIER ** Fill in blank below with thickness from 1-3/8 inches to 1-3/4 inches.
 
g.
Provide Optional Shutter Feature: 9175 Custom Thickness ________.
h.
Provide Optional Shutter Feature: 1350 Cut Out.(#164 Standard)
i.
Provide Optional Shutter Feature: 1351 Custom Cut Out Template.
j.
Provide Optional Shutter Feature: 1425 Inside Chase Beading.
k.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
l.
Provide Optional Shutter Feature: R5 Profiled Panel without Shoulder Rail.
m.
Provide Optional Shutter Feature: R5-S Profiled Panel with Shoulder Rail.
n.
Provide Optional Shutter Feature: R6 Flat Panel without Shoulder Rail.
o.
Provide Optional Shutter Feature: R6-S Flat Panel with Shoulder Rail.
 
** NOTE TO SPECIFIER ** Delete materials not required.
 
44.
Material: Kiln-Dried, Clear Western Red Cedar.
45.
Material: Kiln-Dried, Red Grandis.
46.
Material: Kiln-Dried, Spanish Cedar.
47.
Material: Kiln-Dried, Meranti.
48.
Material: Kiln-Dried, Sapele Mahogany.
49.
Construction: Mortise and tenon hardwood peg joinery.
50.
Thickness: 1-5/16 inches.
 
** NOTE TO SPECIFIER ** Delete louvers if not required.
 
51.
Louvers:
 
** NOTE TO SPECIFIER ** Fill in blanks below or delete subparagraphs not applicable or required.
 
a.
Louver Pitch: ___________.
b.
Louver Spacing: ___________.
 
** NOTE TO SPECIFIER ** Delete if shutters are fully louvered and panels are not required.
 
52.
Panel Thickness: 15/16 inches.
 
** NOTE TO SPECIFIER ** Delete dimensions not required.
 
53.
Configuration: Standard.
a.
Stile Width: 2-1/2 inches.
b.
Top Rail Width: 2-1/2 inches.
c.
Mid Rail Width: 2-1/2 inches.
d.
Bottom Rail Width: 4 inches.
54.
Configuration: Custom width rails and stiles as indicated on Drawings.
55.
Available Size Range:
a.
Minimum Shutter Width: 12 inches.
b.
Maximum Shutter Width: 36 inches.
c.
Minimum Shutter Length: 30 inches.
d.
Maximum Shutter Length: 116 inches.
 
** NOTE TO SPECIFIER ** Delete mounting not required.
 
56.
Mounting: Hinged, functional.
57.
Mounting: Fixed.
 
** NOTE TO SPECIFIER ** Delete finish options not required.
 
58.
Finishes: Unfinished.
59.
Finishes: Factory primed only, Water based primer with UV inhibitor
60.
Finishes: Factory primed and painted.
a.
Primer: Water based primer with UV inhibitor
b.
Paint Type: Water based elastomeric acrylic emulsion.
 
** NOTE TO SPECIFIER ** Fill in blank below with custom option as applicable. Delete paint color options not required.
 
c.
Paint Color: ________.
d.
Paint Color: Custom color matching, as indicated on Drawings.
e.
Paint Color: From manufacturer's 24 standard colors, as indicated on Drawings.
f.
Paint Color: Pitch Black TL-80.
g.
Paint Color: Holly Green TL-49.
h.
Paint Color: Colonial Times Blue, TL-36.
i.
Paint Color: Blue Topaz TL-34.
j.
Paint Color: Antique Bottle Green, TL-46.
k.
Paint Color: Trail Green TL-81.
l.
Paint Color: Blue Lagoon TL-31.
m.
Paint Color: Rain Drop TL-09.
n.
Paint Color: Charleston Proper Green, TL-48.
o.
Paint Color: Slate Stone TL-83.
p.
Paint Color: Black Plum TL-73.
q.
Paint Color: Lemon Meringue TL-55.
r.
Paint Color: Old Essex Green TL-43.
s.
Paint Color: Olive Green TL-47.
t.
Paint Color: Chocolate Brownie, TL-62.
u.
Paint Color: Ballet Slipper TL-58.
v.
Paint Color: Emerald Green TL-41.
w.
Paint Color: Khaki Stone TL-91.
x.
Paint Color: Country Red TL-22.
y.
Paint Color: Porcelain White TL-07.
z.
Paint Color: Envy Green TL-40.
aa.
Paint Color: Sage Grass TL-86.
ab.
Paint Color: Really Red TL-29.
ac.
Paint Color: So White TL-01.
 
** NOTE TO SPECIFIER ** Delete if not required.
 
2.3
SYNTHETIC EXTERIOR SHUTTERS (ENDURIAN SERIES)
A.
Shutters: Endurian Series Synthetic Exterior Shutters as manufactured Timberlane, Inc.
 
** NOTE TO SPECIFIER ** Delete shutter styles not required.
 
1.
Shutter Style: Paneled Shutters, CB1 Raised Panel.
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 5050 Overlap Rabbetting.
b.
Provide Optional Shutter Feature: 8650 Beading - 1/4 inch (Small).
c.
Provide Optional Shutter Feature: 8651 Beading - 3/8 inch (Large).
d.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
e.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
f.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
g.
Provide Optional Shutter Feature: 1350 Cut Out.
h.
Provide Optional Shutter Feature: 1351 Custom Cut Out Template Charge.
i.
Provide Optional Shutter Feature: 9250 Flush Back Panel.
j.
Provide Optional Shutter Feature: 1425 Inside Chase Beading.
k.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
l.
Provide Optional Shutter Feature: RFT Flex Trim without Shoulder Rail.
m.
Provide Optional Shutter Feature: RFT-S Flex Trim W/ Shoulder Rail.
2.
Shutter Style: Paneled Shutters, SH1 Raised Panel.
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 5050 Overlap Rabbetting.
b.
Provide Optional Shutter Feature: 8650 Beading- 1/4 inch (Small).
c.
Provide Optional Shutter Feature: 8651 Beading- 3/8 inch (Large).
d.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
e.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
f.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
g.
Provide Optional Shutter Feature: 1350 Cut Out.
h.
Provide Optional Shutter Feature: 1351 Custom Cut Out Template Charge.
i.
Provide Optional Shutter Feature: 9250 Flush Back Panel.
j.
Provide Optional Shutter Feature: 1425 Inside Chase Beading.
k.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
l.
Provide Optional Shutter Feature: R5 Profiled Panel without Shoulder Rail.
m.
Provide Optional Shutter Feature: R5-S Profiled Panel with Shoulder Rail.
3.
Shutter Style: Paneled Shutters, SH2 Raised Panel.
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 5050 Overlap Rabbetting.
b.
Provide Optional Shutter Feature: 8650 Beading - 1/4 inch (Small).
c.
Provide Optional Shutter Feature: 8651 Beading - 3/8 inch (Large).
d.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
e.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
f.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
g.
Provide Optional Shutter Feature: 9175 Custom Thickness - 1-3/8 inches to 1-3/4 inches.
h.
Provide Optional Shutter Feature: 1350 Cut Out.
i.
Provide Optional Shutter Feature: 1351 Custom Cut Out Template Charge.
j.
Provide Optional Shutter Feature: 9250 Flush Back Panel.
k.
Provide Optional Shutter Feature: 1425 Inside Chase Beading.
l.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
m.
Provide Optional Shutter Feature: RFT Flex Trim without Shoulder Rail.
n.
Provide Optional Shutter Feature: RFT-S Flex Trim W/ Shoulder Rail.
4.
Shutter Style: Paneled Shutters, SH3 Raised Panel.
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 5050 Overlap Rabbetting.
b.
Provide Optional Shutter Feature: 8650 Beading - 1/4 inch (Small).
c.
Provide Optional Shutter Feature: 8651 Beading - 3/8 inch (Large).
d.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
e.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
f.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
g.
Provide Optional Shutter Feature: 1350 Cut Out.
h.
Provide Optional Shutter Feature: 1351 Custom Cut Out Template Charge.
i.
Provide Optional Shutter Feature: 9250 Flush Back Panel.
j.
Provide Optional Shutter Feature: 1425 Inside Chase Beading.
k.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
l.
Provide Optional Shutter Feature: RFT Flex Trim without Shoulder Rail.
m.
Provide Optional Shutter Feature: RFT-S Flex Trim W/ Shoulder Rail.
5.
Shutter Style: Paneled Shutters, UB1 Raised Panel.
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 5050 Overlap Rabbetting.
b.
Provide Optional Shutter Feature: 8650 Beading - 1/4 inch (Small).
c.
Provide Optional Shutter Feature: 8651 Beading - 3/8 inch (Large).
d.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
e.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
f.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
g.
Provide Optional Shutter Feature: 1350 Cut Out.
h.
Provide Optional Shutter Feature: 1351 Custom Cut Out Template.
i.
Provide Optional Shutter Feature: 1425 Inside Chase Beading.
j.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
6.
Shutter Style: Paneled Shutters, FP6 Flat Panel.
 
** NOTE TO SPECIFIER ** Delete optional shutter feature if not required.
 
a.
Provide Optional Shutter Feature: 5050 Overlap Rabbetting.
b.
Provide Optional Shutter Feature: 8650 Beading - 1/4 inch (Small).
c.
Provide Optional Shutter Feature: 8651 Beading - 3/8 inch (Large).
d.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
e.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
f.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
g.
Provide Optional Shutter Feature: 1350 Cut Out.
h.
Provide Optional Shutter Feature: 1351 Custom Cut Out Template.
i.
Provide Optional Shutter Feature: 1425 Inside Chase Beading.
j.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
7.
Shutter Style: Paneled Shutters, FP7 Flat Panel.
 
** NOTE TO SPECIFIER ** Delete optional shutter feature if not required.
 
a.
Provide Optional Shutter Feature: 5050 Overlap Rabbetting.
b.
Provide Optional Shutter Feature: 8650 Beading - 1/4 inch (Small).
c.
Provide Optional Shutter Feature: 8651 Beading - 3/8 inch (Large).
d.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
e.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
f.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
g.
Provide Optional Shutter Feature: 1350 Cut Out.
h.
Provide Optional Shutter Feature: 1351 Custom Cut Out Template.
i.
Provide Optional Shutter Feature: 1425 Inside Chase Beading.
j.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
8.
Shutter Style: Paneled Shutters, VGV "V" Groove Panel.
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 5050 Overlap Rabbetting.
b.
Provide Optional Shutter Feature: 8650 Beading - 1/4 inch (Small).
c.
Provide Optional Shutter Feature: 8651 Beading - 3/8 inch (Large).
d.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
e.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
f.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
g.
Provide Optional Shutter Feature: 1350 Cut Out.
h.
Provide Optional Shutter Feature: 1351 Custom Cut Out Template.
i.
Provide Optional Shutter Feature: 1425 Inside Chase Beading.
j.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
k.
Provide Optional Shutter Feature: R5 Profiled Panel without Shoulder Rail.
l.
Provide Optional Shutter Feature: R5-S Profiled Panel with Shoulder Rail.
m.
Provide Optional Shutter Feature: R6 Flat Panel without Shoulder Rail.
n.
Provide Optional Shutter Feature: R6-S Flat Panel with Shoulder Rail.
9.
Shutter Style: Paneled Shutters, VGD "V" Groove Panel.
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 5050 Overlap Rabbetting.
b.
Provide Optional Shutter Feature: 8650 Beading - 1/4 inch (Small).
c.
Provide Optional Shutter Feature: 8651 Beading - 3/8 inch (Large).
d.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
e.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
f.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
g.
Provide Optional Shutter Feature: 1350 Cut Out.
h.
Provide Optional Shutter Feature: 1351 Custom Cut Out Template.
i.
Provide Optional Shutter Feature: 1425 Inside Chase Beading.
j.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
k.
Provide Optional Shutter Feature: R5 Profiled Panel without Shoulder Rail.
l.
Provide Optional Shutter Feature: R5-S Profiled Panel with Shoulder Rail.
m.
Provide Optional Shutter Feature: R6 Flat Panel without Shoulder Rail.
n.
Provide Optional Shutter Feature: R6-S Flat Panel with Shoulder Rail.
10.
Shutter Style: Paneled Shutters, FP1 Flat Panel.
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 5050 Overlap Rabbetting.
b.
Provide Optional Shutter Feature: 8650 Beading - 1/4 inch (Small).
c.
Provide Optional Shutter Feature: 8651 Beading - 3/8 inch (Large).
d.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
e.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
f.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
g.
Provide Optional Shutter Feature: 1350 Cut Out.
h.
Provide Optional Shutter Feature: 1351 Custom Cut Out Template.
i.
Provide Optional Shutter Feature: 1425 Inside Chase Beading.
j.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
11.
Shutter Style: Paneled Shutters, FP2 Flat Panel.
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 5050 Overlap Rabbetting.
b.
Provide Optional Shutter Feature: 8650 Beading - 1/4 inch (Small).
c.
Provide Optional Shutter Feature: 8651 Beading - 3/8 inch (Large).
d.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
e.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
f.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
g.
Provide Optional Shutter Feature: 1350 Cut Out.
h.
Provide Optional Shutter Feature: 1351 Custom Cut Out Template.
i.
Provide Optional Shutter Feature: 1425 Inside Chase Beading.
j.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
k.
Provide Optional Shutter Feature: R6 Flat Panel without Shoulder Rail.
l.
Provide Optional Shutter Feature: R6-S Flat Panel with Shoulder Rail.
m.
Provide Optional Shutter Feature: RFT Flex Trim without Shoulder Rail.
n.
Provide Optional Shutter Feature: RFT-S Flex Trim W/ Shoulder Rail.
12.
Shutter Style: Paneled Shutters, FP3 Flat Panel.
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 5050 Overlap Rabbetting.
b.
Provide Optional Shutter Feature: 8650 Beading - 1/4 inch (Small).
c.
Provide Optional Shutter Feature: 8651 Beading - 3/8 inch (Large).
d.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
e.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
f.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
g.
Provide Optional Shutter Feature: 1350 Cut Out.
h.
Provide Optional Shutter Feature: 1351 Custom Cut Out Template.
i.
Provide Optional Shutter Feature: 1425 Inside Chase Beading.
j.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
k.
Provide Optional Shutter Feature: R5 Profiled Panel without Shoulder Rail.
l.
Provide Optional Shutter Feature: R5-S Profiled Panel with Shoulder Rail.
m.
Provide Optional Shutter Feature: R6 Flat Panel without Shoulder Rail.
n.
Provide Optional Shutter Feature: R6-S Flat Panel with Shoulder Rail.
13.
Shutter Style: Paneled Shutters, FP4 Flat Panel.
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 5050 Overlap Rabbetting.
b.
Provide Optional Shutter Feature: 8650 Beading - 1/4 inch (Small).
c.
Provide Optional Shutter Feature: 8651 Beading - 3/8 inch (Large).
d.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
e.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
f.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
g.
Provide Optional Shutter Feature: 1350 Cut Out.
h.
Provide Optional Shutter Feature: 1351 Custom Cut Out Template.
i.
Provide Optional Shutter Feature: R6 Flat Panel without Shoulder Rail.
j.
Provide Optional Shutter Feature: R6-S Flat Panel with Shoulder Rail.
k.
Provide Optional Shutter Feature: RFT Flex Trim without Shoulder Rail.
l.
Provide Optional Shutter Feature: RFT-S Flex Trim W/ Shoulder Rail.
14.
Shutter Style: Paneled Shutters, FP5 Flat Panel.
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 5050 Overlap Rabbetting.
b.
Provide Optional Shutter Feature: 8650 Beading - 1/4 inch (Small).
c.
Provide Optional Shutter Feature: 8651 Beading - 3/8 inch (Large).
d.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
e.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
f.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
g.
Provide Optional Shutter Feature: 1350 Cut Out.
h.
Provide Optional Shutter Feature: 1351 Custom Cut Out Template.
i.
Provide Optional Shutter Feature: 1425 Inside Chase Beading.
j.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
k.
Provide Optional Shutter Feature: R6 Flat Panel without Shoulder Rail.
l.
Provide Optional Shutter Feature: R6-S Flat Panel with Shoulder Rail.
m.
Provide Optional Shutter Feature: RFT Flex Trim without Shoulder Rail.
n.
Provide Optional Shutter Feature: RFT-S Flex Trim W/ Shoulder Rail.
15.
Shutter Style: Fixed Louver Shutters, LB1 1-3/8 inches Fixed Louver.
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 5050 Overlap Rabbetting.
b.
Provide Optional Shutter Feature: 8650 Beading- 1/4 inch (Small).
c.
Provide Optional Shutter Feature: 8651 Beading- 3/8 inch (Large).
d.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
e.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
f.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
g.
Provide Optional Shutter Feature: 1250 Tilt Rod - 3/8 inch (Small).
h.
Provide Optional Shutter Feature: 1251 Tilt Rod - 1/2 inch (Large).
i.
Provide Optional Shutter Feature: 1300 Mousehole.
16.
Shutter Style: Fixed Louver Shutters, WL1 1-3/4 inches Fixed Louver.
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 5050 Overlap Rabbetting.
b.
Provide Optional Shutter Feature: 8650 Beading- 1/4 inch (Small).
c.
Provide Optional Shutter Feature: 8651 Beading- 3/8 inch (Large).
d.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
e.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
f.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
g.
Provide Optional Shutter Feature: 1250 Tilt Rod - 3/8 inch (Small).
h.
Provide Optional Shutter Feature: 1251 Tilt Rod - 1/2 inch (Large).
i.
Provide Optional Shutter Feature: 1300 Mousehole.
17.
Shutter Style: Fixed Louver Shutters, WL2 1-3/4 inches Fixed Louver W/Trim.
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 5050 Overlap Rabbetting.
b.
Provide Optional Shutter Feature: 8650 Beading- 1/4 inch (Small).
c.
Provide Optional Shutter Feature: 8651 Beading- 3/8 inch (Large).
d.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
e.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
f.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
g.
Provide Optional Shutter Feature: 1250 Tilt Rod - 3/8 inch (Small).
h.
Provide Optional Shutter Feature: 1251 Tilt Rod - 1/2 inch (Large).
i.
Provide Optional Shutter Feature: 1300 Mousehole.
j.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
k.
Provide Optional Shutter Feature: R2 Radius Top - Sunburst.
l.
Provide Optional Shutter Feature: R3-S Louvered with Shoulder Rail.
18.
Shutter Style: Fixed Louver Shutters, SW1 2-1/2 inches Fixed Louver.
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 5050 Overlap Rabbetting.
b.
Provide Optional Shutter Feature: 8650 Beading- 1/4 inch (Small).
c.
Provide Optional Shutter Feature: 8651 Beading- 3/8 inch (Large).
d.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
e.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
f.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
g.
Provide Optional Shutter Feature: 1250 Tilt Rod - 3/8 inch (Small).
h.
Provide Optional Shutter Feature: 1251 Tilt Rod - 1/2 inch (Large).
i.
Provide Optional Shutter Feature: 1300 Mousehole.
j.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
k.
Provide Optional Shutter Feature: R2 Radius Top - Sunburst.
l.
Provide Optional Shutter Feature: R3-S Louvered with Shoulder Rail.
19.
Shutter Style: Fixed Louver Shutters, TR1 Thru Style Fixed Louver.
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 5050 Overlap Rabbetting.
b.
Provide Optional Shutter Feature: 8650 Beading- 1/4 inch (Small).
c.
Provide Optional Shutter Feature: 8651 Beading- 3/8 inch (Large).
d.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
e.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
f.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
g.
Provide Optional Shutter Feature: 1250 Tilt Rod - 3/8 inch (Small).
h.
Provide Optional Shutter Feature: 1251 Tilt Rod - 1/2 inch (Large).
i.
Provide Optional Shutter Feature: 1300 Mousehole.
j.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
20.
Shutter Style: Fixed Louver Shutters, TR2 Thru Style Fixed Louver (without molding).
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 5050 Overlap Rabbetting.
b.
Provide Optional Shutter Feature: 8650 Beading- 1/4 inch (Small).
c.
Provide Optional Shutter Feature: 8651 Beading- 3/8 inch (Large).
d.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
e.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
f.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
g.
Provide Optional Shutter Feature: 1250 Tilt Rod - 3/8 inch (Small).
h.
Provide Optional Shutter Feature: 1251 Tilt Rod - 1/2 inch (Large).
i.
Provide Optional Shutter Feature: 1300 Mousehole.
j.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
21.
Shutter Style: Operable Louvers, LBO 1-3/8 inches Louver.
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 5050 Overlap Rabbetting.
b.
Provide Optional Shutter Feature: 8650 Beading- 1/4 inch (Small).
c.
Provide Optional Shutter Feature: 8651 Beading- 3/8 inch (Large).
d.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
e.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
f.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
g.
Provide Optional Shutter Feature: 1250 Tilt Rod - 3/8 inch (Small).
h.
Provide Optional Shutter Feature: 1251 Tilt Rod - 1/2 inch (Large).
i.
Provide Optional Shutter Feature: 1300 Mousehole.
j.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
22.
Shutter Style: Operable Louvers, WLO 1-3/4 inches Louver.
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 5050 Overlap Rabbetting.
b.
Provide Optional Shutter Feature: 8650 Beading- 1/4 inch (Small).
c.
Provide Optional Shutter Feature: 8651 Beading- 3/8 inch (Large).
d.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
e.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
f.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
g.
Provide Optional Shutter Feature: 1250 Tilt Rod - 3/8 inch (Small).
h.
Provide Optional Shutter Feature: 1251 Tilt Rod - 1/2 inch (Large).
i.
Provide Optional Shutter Feature: 1300 Mousehole.
j.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
23.
Shutter Style: Board and Batten Shutters, BBP1 Board and Batten - Closed with Bead.
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 1350 Cut Out.
b.
Provide Optional Shutter Feature: 1351 Custom Cut Out Template Charge.
c.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
24.
Shutter Style: Board and Batten Shutters, BBCV(BBC3) Board and Batten - "V" Groove-Vertical.
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 1350 Cut Out.
b.
Provide Optional Shutter Feature: 1351 Custom Cut Out Template Charge.
c.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
25.
Shutter Style: Board and Batten Shutters, BBCD(BBC3) Board and Batten - "V" Groove-Diagonal.
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 1350 Cut Out.
b.
Provide Optional Shutter Feature: 1351 Custom Cut Out Template Charge.
c.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
26.
Shutter Style: Board and Batten Shutters, BBO(BBO5) Board and Batten - Open.
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 1350 Cut Out.
b.
Provide Optional Shutter Feature: 1351 Custom Cut Out Template Charge.
c.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
27.
Shutter Style: Paneled Shutters, M1 Mission Style
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 5050 Overlap Rabbetting.
b.
Provide Optional Shutter Feature: 8650 Beading - 1/4 inch (Small).
c.
Provide Optional Shutter Feature: 8651 Beading - 3/8 inch (Large).
d.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
e.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
f.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
 
** NOTE TO SPECIFIER ** Fill in blank below with thickness from 1-3/8 inches to 1-3/4 inches.
 
g.
Provide Optional Shutter Feature: 9175 Custom Thickness ________.
h.
Provide Optional Shutter Feature: 1350 Cut Out.
i.
Provide Optional Shutter Feature: 1351 Custom Cut Out Template.
j.
Provide Optional Shutter Feature: 1425 Inside Chase Beading.
k.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
l.
Provide Optional Shutter Feature: R5 Profiled Panel without Shoulder Rail.
m.
Provide Optional Shutter Feature: R5-S Profiled Panel with Shoulder Rail.
n.
Provide Optional Shutter Feature: R6 Flat Panel without Shoulder Rail.
o.
Provide Optional Shutter Feature: R6-S Flat Panel with Shoulder Rail.
28.
Shutter Style: Paneled Shutters, M2 Mission Style
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 5050 Overlap Rabbetting.
b.
Provide Optional Shutter Feature: 8650 Beading - 1/4 inch (Small).
c.
Provide Optional Shutter Feature: 8651 Beading - 3/8 inch (Large).
d.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
e.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
f.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
 
** NOTE TO SPECIFIER ** Fill in blank below with thickness from 1-3/8 inches to 1-3/4 inches.
 
g.
Provide Optional Shutter Feature: 9175 Custom Thickness ________.
h.
Provide Optional Shutter Feature: 1350 Cut Out.(#164 Standard)
i.
Provide Optional Shutter Feature: 1351 Custom Cut Out Template.
j.
Provide Optional Shutter Feature: 1425 Inside Chase Beading.
k.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
l.
Provide Optional Shutter Feature: R5 Profiled Panel without Shoulder Rail.
m.
Provide Optional Shutter Feature: R5-S Profiled Panel with Shoulder Rail.
n.
Provide Optional Shutter Feature: R6 Flat Panel without Shoulder Rail.
o.
Provide Optional Shutter Feature: R6-S Flat Panel with Shoulder Rail.
29.
Shutter Style: Paneled Shutters, M4 Mission Style
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 5050 Overlap Rabbetting.
b.
Provide Optional Shutter Feature: 8650 Beading - 1/4 inch (Small).
c.
Provide Optional Shutter Feature: 8651 Beading - 3/8 inch (Large).
d.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
e.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
f.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
 
** NOTE TO SPECIFIER ** Fill in blank below with thickness from 1-3/8 inches to 1-3/4 inches.
 
g.
Provide Optional Shutter Feature: 9175 Custom Thickness ________.
h.
Provide Optional Shutter Feature: 1350 Cut Out.(#164 Standard)
i.
Provide Optional Shutter Feature: 1351 Custom Cut Out Template.
j.
Provide Optional Shutter Feature: 1425 Inside Chase Beading.
k.
Provide Optional Shutter Feature: R1 Radius Top - Solid.
l.
Provide Optional Shutter Feature: R5 Profiled Panel without Shoulder Rail.
m.
Provide Optional Shutter Feature: R5-S Profiled Panel with Shoulder Rail.
n.
Provide Optional Shutter Feature: R6 Flat Panel without Shoulder Rail.
o.
Provide Optional Shutter Feature: R6-S Flat Panel with Shoulder Rail.
 
** NOTE TO SPECIFIER ** Delete materials not required.
 
30.
Material: Proprietary PVC extrusions.
31.
Material: Pultruded fiberglass.
32.
Material: High performance wood composite.
33.
Thickness: 1-5/16 inches.
 
** NOTE TO SPECIFIER ** Delete louvers if not required.
 
34.
Louvers:
 
** NOTE TO SPECIFIER ** Fill in blanks below or delete subparagraphs not applicable or required.
 
a.
Louver Pitch: ___________.
b.
Louver Spacing: ___________.
 
** NOTE TO SPECIFIER ** Delete if shutters are fully louvered and panels are not required.
 
35.
Panel Thickness:3/4 inches.
 
** NOTE TO SPECIFIER ** Delete dimensions not required.
 
36.
Configuration: Standard.
a.
Stile Width: 2-1/2 inches.
b.
Top Rail Width: 2-1/2 inches.
c.
Mid Rail Width: 2-1/2 inches.
d.
Bottom Rail Width: 4 inches.
37.
Configuration: Custom width rails and stiles as indicated on Drawings.
38.
Available Size Range:
a.
Minimum Shutter Width: 12 inches.
b.
Maximum Shutter Width: 36 inches.
c.
Minimum Shutter Length: 30 inches.
d.
Maximum Shutter Length: 116 inches.
 
** NOTE TO SPECIFIER ** Delete mounting not required.
 
39.
Mounting: Hinged, functional.
40.
Mounting: Fixed.
 
** NOTE TO SPECIFIER ** Delete finish options not required.
 
41.
Finishes: Factory primed and painted.
a.
Primer: Water based Primer/sealer with UV inhibitor low VOCs.
b.
Paint Type: Water based elastomeric acrylic emulsion.
 
** NOTE TO SPECIFIER ** Fill in blank below with custom option as applicable. Delete paint color options not required.
 
c.
Paint Color: ________.
d.
Paint Color: Custom color matching, as indicated on Drawings.
e.
Paint Color: From manufacturer's 24 standard colors, as indicated on Drawings.
f.
Paint Color: Pitch Black TL-80.
g.
Paint Color: Holly Green TL-49.
h.
Paint Color: Colonial Times Blue, TL-36.
i.
Paint Color: Blue Topaz TL-34.
j.
Paint Color: Antique Bottle Green, TL-46.
k.
Paint Color: Trail Green TL-81.
l.
Paint Color: Blue Lagoon TL-31.
m.
Paint Color: Rain Drop TL-09.
n.
Paint Color: Charleston Proper Green, TL-48.
o.
Paint Color: Slate Stone TL-83.
p.
Paint Color: Black Plum TL-73.
q.
Paint Color: Lemon Meringue TL-55.
r.
Paint Color: Old Essex Green TL-43.
s.
Paint Color: Olive Green TL-47.
t.
Paint Color: Chocolate Brownie, TL-62.
u.
Paint Color: Ballet Slipper TL-58.
v.
Paint Color: Emerald Green TL-41.
w.
Paint Color: Khaki Stone TL-91.
x.
Paint Color: Country Red TL-22.
y.
Paint Color: Porcelain White TL-07.
z.
Paint Color: Envy Green TL-40.
aa.
Paint Color: Sage Grass TL-86.
ab.
Paint Color: Really Red TL-29.
ac.
Paint Color: So White TL-01.
2.4
FIBERGLASS EXTERIOR SHUTTERS (SUPREMITY SERIES)
A.
Shutters: Supremity Series fiberglass Exterior Shutters as manufactured Timberlane, Inc.
 
** NOTE TO SPECIFIER ** Delete shutter styles not required.
 
1.
Shutter Style: Paneled Shutters, RPS Raised Panel.
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
b.
Provide Optional Shutter Feature: 1350 Cut Out.
c.
Provide Optional Shutter Feature: 1351 Custom Cut Out Template Charge.
2.
Shutter Style: Paneled Shutters, FPS Flat Panel.
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
b.
Provide Optional Shutter Feature: 1350 Cut Out.
c.
Provide Optional Shutter Feature: 1351 Custom Cut Out Template Charge.
3.
Shutter Style: Paneled Shutters, VGDS Flat Panel.
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
b.
Provide Optional Shutter Feature: 1350 Cut Out.
c.
Provide Optional Shutter Feature: 1351 Custom Cut Out Template Charge.
4.
Shutter Style: Paneled Shutters, VPS Flat Panel.
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
b.
Provide Optional Shutter Feature: 1350 Cut Out.
c.
Provide Optional Shutter Feature: 1351 Custom Cut Out Template Charge.
5.
Shutter Style: Fixed Louver Shutters, LB1S 1-3/8 inches Fixed Louver.
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
b.
Provide Optional Shutter Feature: 1250 Tilt Rod - 3/8 inch (Small).
c.
Provide Optional Shutter Feature: 1251 Tilt Rod - 1/2 inch (Large).
6.
Shutter Style: Fixed Louver Shutters, WL1S 1-3/8 inches Fixed Louver.
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
b.
Provide Optional Shutter Feature: 1250 Tilt Rod - 3/8 inch (Small).
c.
Provide Optional Shutter Feature: 1251 Tilt Rod - 1/2 inch (Large).
7.
Shutter Style: Fixed Louver Shutters, WL2S 1-3/8 inches Fixed Louver.
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
b.
Provide Optional Shutter Feature: 1250 Tilt Rod - 3/8 inch (Small).
c.
Provide Optional Shutter Feature: 1251 Tilt Rod - 1/2 inch (Large).
8.
Shutter Style: Fixed Louver Shutters, SW1S 1-3/8 inches Fixed Louver.
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
b.
Provide Optional Shutter Feature: 1250 Tilt Rod - 3/8 inch (Small).
c.
Provide Optional Shutter Feature: 1251 Tilt Rod - 1/2 inch (Large).
9.
Shutter Style: Bermuda Shutters, BS1 1-3/8 inches Fixed Louver.
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
b.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
c.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
d.
Provide Optional Shutter Feature: 1250 Tilt Rod - 3/8 inch (Small).
e.
Provide Optional Shutter Feature: 1251 Tilt Rod - 1/2 inch (Large).
10.
Shutter Style: Bermuda Shutters, BS2 1-3/4 inches Fixed Louver.
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
b.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
c.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
d.
Provide Optional Shutter Feature: 1250 Tilt Rod - 3/8 inch (Small).
e.
Provide Optional Shutter Feature: 1251 Tilt Rod - 1/2 inch (Large).
11.
Shutter Style: Bermuda Shutters, BS3 2-1/2 inches Fixed Louver.
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
b.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
c.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
d.
Provide Optional Shutter Feature: 1250 Tilt Rod - 3/8 inch (Small).
e.
Provide Optional Shutter Feature: 1251 Tilt Rod - 1/2 inch (Large).
12.
Shutter Style: Bermuda Shutters, BS4 1-3/4 inches Fixed Louver with Trim.
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
b.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
c.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
d.
Provide Optional Shutter Feature: 1250 Tilt Rod - 3/8 inch (Small).
e.
Provide Optional Shutter Feature: 1251 Tilt Rod - 1/2 inch (Large)
13.
Shutter Style: Bermuda Shutters, BS5 1-3/4 inches Fixed Louver with Trim.
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Provide Optional Shutter Feature: 8800 Custom Rail Placement.
b.
Provide Optional Shutter Feature: 8850 Custom Rail Width.
c.
Provide Optional Shutter Feature: 8900 Custom Stile Width.
d.
Provide Optional Shutter Feature: 1250 Tilt Rod - 3/8 inch (Small).
e.
Provide Optional Shutter Feature: 1251 Tilt Rod - 1/2 inch (Large).
 
** NOTE TO SPECIFIER ** Delete materials not required.
 
14.
Material: Proprietary PVC extrusions.
15.
Material: Pultruded fiberglass.
16.
Material: High performance Synthetic material
17.
Thickness: 1-5/16 inches.
 
** NOTE TO SPECIFIER ** Delete louvers if not required.
 
18.
Louvers:
 
** NOTE TO SPECIFIER ** Fill in blanks below or delete subparagraphs not applicable or required.
 
a.
Lover Pitch: ___________.
b.
Louver Spacing: ___________.
 
** NOTE TO SPECIFIER ** Delete if shutters are fully louvered and panels are not required.
 
19.
Panel Thickness: 3/4 inches.
 
** NOTE TO SPECIFIER ** Delete dimensions not required.
 
20.
Configuration: Standard.
a.
Stile Width: 2-1/2 inches.
b.
Top Rail Width: 2-1/2 inches.
c.
Mid Rail Width: 2-1/2 inches.
d.
Bottom Rail Width: 2-1/2 inches.
21.
Available Size Range:
a.
Minimum Shutter Width: 12 inches.
b.
Maximum Shutter Width: 48 inches.
c.
Minimum Shutter Length: 30 inches.
d.
Maximum Shutter Length: 140 inches.
 
** NOTE TO SPECIFIER ** Delete mounting not required.
 
22.
Mounting: Hinged, functional.
23.
Mounting: Fixed.
 
** NOTE TO SPECIFIER ** Delete finish options not required.
 
24.
Finishes: Factory primed and painted.
a.
Primer: Water based Primer/sealer with UV inhibitor low VOCs
b.
Paint Type: Water based elastomeric acrylic emulsion.
 
** NOTE TO SPECIFIER ** Fill in blank below with custom option as applicable. Delete paint color options not required.
 
c.
Paint Color: ________.
d.
Paint Color: Custom color matching, as indicated on Drawings.
e.
Paint Color: From manufacturer's 24 standard colors, as indicated on Drawings.
f.
Paint Color: Pitch Black TL-80.
g.
Paint Color: Holly Green TL-49.
h.
Paint Color: Colonial Times Blue, TL-36.
i.
Paint Color: Blue Topaz TL-34.
j.
Paint Color: Antique Bottle Green, TL-46.
k.
Paint Color: Trail Green TL-81.
l.
Paint Color: Blue Lagoon TL-31.
m.
Paint Color: Rain Drop TL-09.
n.
Paint Color: Charleston Proper Green, TL-48.
o.
Paint Color: Slate Stone TL-83.
p.
Paint Color: Black Plum TL-73.
q.
Paint Color: Lemon Meringue TL-55.
r.
Paint Color: Old Essex Green TL-43.
s.
Paint Color: Olive Green TL-47.
t.
Paint Color: Chocolate Brownie, TL-62.
u.
Paint Color: Ballet Slipper TL-58.
v.
Paint Color: Emerald Green TL-41.
w.
Paint Color: Khaki Stone TL-91.
x.
Paint Color: Country Red TL-22.
y.
Paint Color: Porcelain White TL-07.
z.
Paint Color: Envy Green TL-40.
aa.
Paint Color: Sage Grass TL-86.
ab.
Paint Color: Really Red TL-29.
ac.
Paint Color: So White TL-01.
2.5
COMPOSITE EXTERIOR SHUTTERS (FUNDAMENTAL SERIES)
A.
Shutters: Fundamental Series Composite Exterior Shutters as manufactured Timberlane, Inc.
 
** NOTE TO SPECIFIER ** Delete shutter styles not required.
 
1.
Shutter Style: Paneled Shutters, FUP Raised Panel.
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Standard 1002 50/50 Configuration
2.
Shutter Style: Paneled Shutters, FUL Raised Panel.
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Standard 1002 50/50 Configuration
3.
Material: Wood Composite
4.
Thickness: 1-1/4 inches.
 
** NOTE TO SPECIFIER ** Delete louvers if not required.
 
5.
Louvers:
 
** NOTE TO SPECIFIER ** Fill in blanks below or delete subparagraphs not applicable or required.
 
a.
Fixed Faux Louvers
 
** NOTE TO SPECIFIER ** Delete if shutters are fully louvered and panels are not required.
 
6.
Panel Thickness: 3/4 inches
 
** NOTE TO SPECIFIER ** Delete dimensions not required.
 
7.
Configuration: Standard.
a.
Stile Width: 2-1/2 inches.
b.
Top Rail Width: 2-1/2 inches.
c.
Mid Rail Width: 2-1/2 inches.
d.
Bottom Rail Width: 3 1/2 inches.
8.
Available Size Range:
a.
Minimum Shutter Width: 12 inches.
b.
Maximum Shutter Width: 36 inches.
c.
Minimum Shutter Length: 30 inches.
d.
Maximum Shutter Length: 96 inches.
 
** NOTE TO SPECIFIER ** Delete mounting not required.
 
9.
Mounting: Hinged, functional.
10.
Mounting: Fixed.
11.
Finishes: Factory primed only
 
** NOTE TO SPECIFIER ** Delete finish options not required.
 
12.
Finishes: Factory primed and painted.
a.
Primer: Water based Primer/sealer with UV inhibitor low VOCs
b.
Paint Type: Water based elastomeric acrylic emulsion.
 
** NOTE TO SPECIFIER ** Fill in blank below with custom option as applicable. Delete paint color options not required.
 
c.
Paint Color: ________.
d.
Paint Color: Custom color matching, as indicated on Drawings.
e.
Paint Color: From manufacturer's 6 standard colors, as indicated on Drawings.
f.
Paint Color: Pitch Black TL-80.
g.
Paint Color: Colonial Times Blue, TL-36.
h.
Paint Color: Old Essex Green TL-43.
i.
Paint Color: Khaki Stone TL-91.
j.
Paint Color: Country Red TL-22.
k.
Paint Color: So White TL-01.
2.6
SYNTHETIC OUT DOOR PLANTERS (TIMBERLANE HOME COLLECTION)
A.
Planters Timberlane Home Collection as manufactured Timberlane, Inc.
 
** NOTE TO SPECIFIER ** Delete shutter styles not required.
 
1.
Planter Style: Abigail Flat panel with trim,(PBA-Flat panel) .
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Standard 16in
b.
Standard 20in
c.
Standard 24in
2.
Planter Style: Caroline VGV panel,(PBC-VGV panel) .
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Standard 16in
b.
Standard 20in
c.
Standard 24in
3.
Planter Style: Evelyn Lattice panel,(PBE-Lattice panel) .
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Standard 16in
b.
Standard 20in
c.
Standard 24in
4.
Planter Style: Margaret Raised panel,(PBM-Raised panel) .
 
** NOTE TO SPECIFIER ** Delete optional shutter features not required.
 
a.
Standard 16in
b.
Standard 20in
c.
Standard 24in
d.
Cut out_____.
e.
Cut out selected sides.
5.
Material: Solid PVC
6.
Thickness: 1-1/2
 
** NOTE TO SPECIFIER ** Delete louvers if not required.
** NOTE TO SPECIFIER ** Delete if shutters are fully louvered and panels are not required.
 
7.
Panel Thickness: 3/4 inches
 
** NOTE TO SPECIFIER ** Delete dimensions not required.
 
8.
Configuration: Standard.
a.
Leg Width: 2-1/2 inches.
b.
Top Rail Width: 2-1/2 inches.
c.
Bottom Rail Width: 2 1/2 inches.
9.
Available Size Range:
a.
16in
b.
20in
c.
24in
10.
Removable bottom
11.
Finishes: Factory primed and painted.
a.
Primer. Water based Primer/sealer with UV inhibitor low VOCs
b.
Paint Type: Water based elastomeric acrylic emulsion.
 
** NOTE TO SPECIFIER ** Fill in blank below with custom option as applicable. Delete paint color options not required.
 
c.
Paint Color: ________.
d.
Paint Color: Custom color matching, as indicated on Drawings.
e.
Paint Color: From manufacturer's 24 standard colors, as indicated on Drawings.
f.
Paint Color: Pitch Black TL-80.
g.
Paint Color: Holly Green TL-49.
h.
Paint Color: Colonial Times Blue, TL-36.
i.
Paint Color: Blue Topaz TL-34.
j.
Paint Color: Antique Bottle Green, TL-46.
k.
Paint Color: Trail Green TL-81.
l.
Paint Color: Blue Lagoon TL-31.
m.
Paint Color: Rain Drop TL-09.
n.
Paint Color: Charleston Proper Green, TL-48.
o.
Paint Color: Slate Stone TL-83.
p.
Paint Color: Black Plum TL-73.
q.
Paint Color: Lemon Meringue TL-55.
r.
Paint Color: Old Essex Green TL-43.
s.
Paint Color: Olive Green TL-47.
t.
Paint Color: Chocolate Brownie, TL-62.
u.
Paint Color: Ballet Slipper TL-58.
v.
Paint Color: Emerald Green TL-41.
w.
Paint Color: Khaki Stone TL-91.
x.
Paint Color: Country Red TL-22.
y.
Paint Color: Porcelain White TL-07.
z.
Paint Color: Envy Green TL-40.
aa.
Paint Color: Sage Grass TL-86.
ab.
Paint Color: Really Red TL-29.
ac.
Paint Color: So White TL-01.
 
** NOTE TO SPECIFIER ** Delete if not required.
 
2.7
HARDWARE
 
** NOTE TO SPECIFIER ** Delete hinge types and options not required.
 
A.
Hinges: As manufactured by Timberlane, Inc.
 
** NOTE TO SPECIFIER ** Our heavy duty line of strap hinges are designed to fit our line of heavy duty pintels. Strap hinges are typically mounted on the rear of the shutter. Delete hinge types not required.
 
1.
Strap Hinges: Heavy duty tapered strap hinges, 12 inches L x 1-1/2 inches W, 3/16 inch thick stainless steel, back powder coated, 1/2 inch sleeve diameter.
 
** NOTE TO SPECIFIER ** Delete SKU for products not required.
 
a.
SKU No.: 102121S; 0 inch hinge offset.
b.
SKU No.: 102123S; 1 inch hinge offset.
c.
SKU No.: 102124S; 2 inch hinge offset.
2.
Strap Hinges: Heavy duty strap hinges with attached pin; 1-1/2 inch width, 3/16 inch thick steel, back powder coated, 1/2 inch pin diameter, 0 inch hinge offset.
 
** NOTE TO SPECIFIER ** Delete SKU for products not required.
 
a.
SKU No.: 103121L, 103121R; left and right, tapered, with hand hammered bevel, 12 inch length.
b.
SKU No.: 103122L, 103122R; left and right, tapered, 12 inch length.
c.
SKU No.: 103123L, 103123R; left and right, storm, 12 inch length.
d.
SKU No.: 103161L, 103161R; left and right, tapered, with hand hammered bevel, 16 inch length.
e.
SKU No.: 103162L, 103162R; left and right, tapered, 16 inch length.
f.
SKU No.: 103163L, 103163R; left and right, storm, 16 inch length.
3.
Strap Hinges: Heavy duty tapered strap hinges with hand hammered bevel; 1-1/2 inch width, 3/16 inch thick steel, back powder coated, 1/2 inch sleeve diameter.
 
** NOTE TO SPECIFIER ** Delete SKU for products if not required.
 
a.
SKU No.: 101121; 12 inch length, 0 inch hinge offset.
b.
SKU No.: 101123; 12 inch length, 1 inch hinge offset.
c.
SKU No.: 101124; 12 inch length, 2 inch hinge offset.
d.
SKU No.: 101125; 12 inch length, 3 inch hinge offset.
e.
SKU No.: 101161; 16 inch length, 0 inch hinge offset.
f.
SKU No.: 101163; 16 inch length, 1 inch hinge offset.
g.
SKU No.: 101164; 16 inch length, 2 inch hinge offset.
h.
SKU No.: 101165; 16 inch length, 3 inch hinge offset.
4.
Strap Hinges: Heavy duty tapered strap hinges; 1-1/2 inch width, 3/16 inch thick steel, back powder coated, 1/2 inch sleeve diameter.
 
** NOTE TO SPECIFIER ** Delete SKU for products if not required.
 
a.
SKU No.: 102081; 8 inch length, 0 inch hinge offset.
b.
SKU No.: 102083; 8 inch length, 1 inch hinge offset.
c.
SKU No.: 102084; 8 inch length, 2 inch hinge offset.
d.
SKU No.: 102085; 8 inch length, 3 inch hinge offset.
e.
SKU No.: 102121; 12 inch length, 0 inch hinge offset.
f.
SKU No.: 102123; 12 inch length, 1 inch hinge offset.
g.
SKU No.: 102124; 12 inch length, 2 inch hinge offset.
h.
SKU No.: 102125; 12 inch length, 3 inch hinge offset.
i.
SKU No.: 102161; 16 inch length, 0 inch hinge offset.
j.
SKU No.: 102163; 16 inch length, 1 inch hinge offset
k.
SKU No.: 102164; 16 inch length, 2 inch hinge offset
l.
SKU No.: 102165; 16 inch length, 3 inch hinge offset
5.
Strap Hinges: Heavy duty storm strap hinges; 1-1/2 inch width, 3/16 inch thick steel, back powder coated, 1/2 inch sleeve diameter.
 
** NOTE TO SPECIFIER ** Delete SKU for products if not required.
 
a.
SKU No.: 104121; 12 inch length, 0 inch hinge offset.
b.
SKU No.: 104123; 12 inch length, 1 inch hinge offset.
c.
SKU No.: 104124; 12 inch length, 2 inch hinge offset.
d.
SKU No.: 104125; 12 inch length, 3 inch hinge offset.
e.
SKU No.: 104161; 16 inch length, 0 inch hinge offset.
f.
SKU No.: 104163; 16 inch length, 1 inch hinge offset.
g.
SKU No.: 104164; 16 inch length, 2 inch hinge offset.
h.
SKU No.: 104165; 16 inch length, 3 inch hinge offset.
6.
Strap Hinges: Standard duty, Philadelphia style with attached pin, 12 inches L x 2 inches W, 1/8 inch thick steel, black powder coated, 3/8 inch pin diameter.
 
** NOTE TO SPECIFIER ** Delete SKU for products if not required.
 
a.
SKU No.: 105201L, 105201R; left and right, 0 inch hinge offset.
b.
SKU No.: 105202L, 105202R; left and right, 1 inch hinge offset.
c.
SKU No.: 105203L, 105203R; left and right, 2 inch hinge offset.
d.
SKU No.: 105204L, 105204R; left and right, 3 inch hinge offset.
7.
Strap Hinges: Standard duty, 10 inches L x 1-3/4 inches W, 1/8 inch thick stainless steel, black powder coated, 3/8 inch sleeve diameter.
 
** NOTE TO SPECIFIER ** Delete SKU for products if not required.
 
a.
SKU No.: 117101S; 1/2 inch hinge offset.
b.
SKU No.: 117102S; 1-1/2 inch hinge offset.
c.
SKU No.: 117103S; 2-1/2 inch hinge offset.
8.
Strap Hinges: Standard duty, 4-7/8 inches L x 1-3/8 inches W, 1/8 inch thick stainless steel, black powder coated, 3/8 inch sleeve diameter.
 
** NOTE TO SPECIFIER ** Delete SKU for products if not required.
 
a.
SKU No.: 117106S; 1/2 inch hinge offset.
b.
SKU No.: 117107S; 1-1/2 inch hinge offset.
c.
SKU No.: 117108S; 2-1/4 inch hinge offset.
9.
New York Style "L" Style Hinges: Standard duty, 1/8 inch thick stainless steel, black powder coated, 5 inch H x 4-7/8 inch L, 3/8 inch sleeve diameter.
 
** NOTE TO SPECIFIER ** Delete SKU for products if not required.
 
a.
SKU No.: 11101S; 1/2 inch hinge offset.
b.
SKU No.: 11102S; 1-1/2 inch hinge offset.
c.
SKU No.: 11103S; 2-1/2 inch hinge offset.
10.
New York Style "L" Style Hinges: Light duty, 5/16 inch thick steel, black powder coated, 4 inch H x 4-3/4 inch L, 1/4 inch pin diameter.
 
** NOTE TO SPECIFIER ** Delete SKU for products if not required.
 
a.
SKU No.: 11001; 2-1/2 inch total offset.
b.
SKU No.: 11002; 4-1/2 inch total offset.
11.
Lull and Porter (ACME) Mortise Hinges:
 
** NOTE TO SPECIFIER ** Delete SKU for products if not required.
 
a.
SKU No.: SKU No. 10901; cast iron, 2-1/2 in hinge height, 3-1/8 in open width.
b.
SKU No.: SKU No. 10902; cast iron, 2-3/8 in hinge height, 3-3/4 in open width.
c.
SKU No.: SKU No. 10903; cast iron, 2-3/4 in hinge height, 4-1/2 in open width.
d.
SKU No.: SKU No. 10903; cast iron, 2-7/8 in hinge height, 5 in open width.
e.
SKU No.: SKU No. 10903; cast iron, 3-1/8 in hinge height, 5-1/2 in open width.
f.
SKU No.: SKU No. 10903; cast iron, 3-3/8 in hinge height, 6-1/2 in open width.
g.
SKU No.: SKU No. 10903; cast iron, 3-3/4 in hinge height, 9 in open width.
12.
Clark Tip Hinges:
 
** NOTE TO SPECIFIER ** Delete SKU for products if not required.
 
a.
SKU No.: 11301; cast iron, 2 inch hinge height, 1-1/4 inch total offset.
b.
SKU No.: 11302; cast iron, 2-3/8 inch hinge height, 3-1/4 inch total offset.
13.
"H" Style Lift-Off Hinges:
 
** NOTE TO SPECIFIER ** Delete SKU for products if not required.
 
a.
SKU No.: 107011, 107012; light duty, left and right, 14 gauge hot rolled carbon steel, black powder coated, 3 inch hinge height, 3 inch open width.
b.
SKU No.: 107021, 107022; light duty, left and right, 14 gauge hot rolled carbon steel, black powder coated, 3 inch hinge height, 5-1/2 inch open width.
c.
SKU No.: 107031, 107032; heavy duty, left and right, 11 gauge hot rolled carbon steel, black powder coated, 4 inch hinge height, 4 inch open width.
d.
SKU No.: 107041, 107042; heavy duty, left and right, 11 gauge hot rolled carbon steel, black powder coated, 4 inch hinge height, 6-1/2 inch open width.
e.
SKU No.: 107051, 107052; heavy duty, left and right, 11 gauge hot rolled carbon steel, black powder coated, 4 inch hinge height, 8-1/2 inch open width
14.
Butt Hinges:
 
** NOTE TO SPECIFIER ** Delete SKU for products if not required.
 
a.
SKU No.: 10801; light duty, for bi-folding shutters, 12 gauge steel, black powder coated, 3 inch open width, 3 inch hinge height.
b.
SKU No.: 10801; light duty, for bi-folding shutters, 12 gauge steel, black powder coated, 4 inch open width, 4 inch hinge height.
15.
Flat Hinges: SKU No. 2077; heavy duty "T" flat hinge, steel, black powder coat, 3 inches L x 1 inch W plate, 3/16 inch thick, 1/2 inch sleeve diameter, 0 inch offset, fits 1/2 inch pintels.
16.
Connecticut Style Hinges: SKU No. 11501; light duty, steel, black powder coat, 3-1/2 inches H x 1 inch L, 5/16 inch thick, 1/4 inch pin dia., 5/16 inch thick, adjustable offset.
17.
New England Style Hinges: SKU No. 11601; galvanized steel, 3 inches H x 1 inch L, 1/4 inch pin diameter, 5/16 inch thick, 1-1/4 inch hinge offset.
 
** NOTE TO SPECIFIER ** Delete if not required.
 
B.
Pintels: As manufactured Timberlane, Inc; including manufacturer's standard hardware.
 
** NOTE TO SPECIFIER ** Delete pintel types if not required.
 
1.
Plate Pintels: Heavy duty, stainless steel, black powder coat.
 
** NOTE TO SPECIFIER ** Delete SKU for products if not required.
 
a.
SKU No.: 2042S; 4 inches L x 1 inch W, 3/16 inch thick, 1/2 inch pin diameter.
1)
Pintel Offset: 1 inch.
b.
SKU No.: 2043S; 4 inches L x 1 inch W, 3/16 inch thick, 1/2 inch pin diameter.
1)
Pintel Offset: 2 inches.
c.
SKU No.: 2062S; 4 inches L x 1-1/2 inch W, 3/16 inch thick, 1/2 inch pin dia.
1)
Pintel Offset: 1 inch.
d.
SKU No.: 2063S; 4 inches L x 1-1/2 inch W, 3/16 inch thick, 1/2 inch pin dia.
1)
Pintel Offset: 2 inches.
2.
Plate Pintels: Standard duty, stainless steel, black powder coat.
 
** NOTE TO SPECIFIER ** Delete SKU for products if not required.
 
a.
SKU No.: 2081S; 4 inches L x 1-1/2 inch W, 1/8 inch thick, 3/8 inch pin dia.
1)
Pintel Offset: 1/2 inch.
b.
SKU No.: 2082S; 4 inches L x 1-1/2 inch W, 1/8 inch thick, 3/8 inch pin dia.
1)
Pintel Offset: 1-1/2 inch.
c.
SKU No.: 2083S; 4 inches L x 1-1/2 inch W, 1/8 inch thick, 3/8 inch pin dia.
1)
Pintel Offset: 2-1/2 inch.
3.
Plate Pintels: Heavy duty, steel, black powder coat.
 
** NOTE TO SPECIFIER ** Delete SKU for products if not required.
 
a.
SKU No.: 2042; 4 inches L x 1 inch W, 3/16 inch thick, 1/2 inch pin diameter.
1)
Pintel Offset: 1 inch.
b.
SKU No.: 2043; 4 inches L x 1 inch W, 3/16 inch thick, 1/2 inch pin diameter.
1)
Pintel Offset: 2 inch.
c.
SKU No.: 2044; 4 inches L x 1 inch W, 3/16 inch thick, 1/2 inch pin diameter.
1)
Pintel Offset: 3 inch.
d.
SKU No.: 2062; 4 inches L x 1-1/2 inch W, 3/16 inch thick, 1/2 inch pin dia.
1)
Pintel Offset: 1 inch.
e.
SKU No.: 2063; 4 inches L x 1-1/2 inch W, 3/16 inch thick, 1/2 inch pin dia.
1)
Pintel Offset: 2 inches.
f.
SKU No.: 2064; 4 inches L x 1-1/2 inch W, 3/16 inch thick, 1/2 inch pin dia.
1)
Pintel Offset: 3 inches.
g.
SKU No.: 2065; 4 inches L x 1-1/2 inch W, 3/16 inch thick, 1/2 inch pin dia.
1)
Pintel Offset: 4 inches.
h.
SKU No.: 2070L, 2070R; left and right, 5 inches L x 1-1/2 inch W, 3/16 inch thick, 1/2 inch pin diameter.
4.
Jamb Pintels: Heavy duty, 3-1/4 inches L x 1 inch W plate, 3/16 inch thickness, steel, black powder coated, 1/2 inch pin diameter.
 
** NOTE TO SPECIFIER ** Delete SKU for products if not required.
 
a.
SKU No.: 2032; 1 inch pintel offset.
b.
SKU No.: 2033; 2 inch pintel offset.
c.
SKU No.: 2034; 3 inch pintel offset.
5.
Lag Pintels: Stainless steel, black powder coated, adjustable pintel offset.
 
** NOTE TO SPECIFIER ** Delete SKU for products if not required.
 
a.
SKU No.: 2071S; heavy duty, stainless steel, 4 inch bolt length.
1)
Pin Diameter: 1/2 inch.
b.
SKU No.: 2091S; stainless steel, 4 inch bolt length.
1)
Pin Diameter: 3/8 inch.
6.
Lag Pintels: Heavy duty, steel, black powder coated.
 
** NOTE TO SPECIFIER ** Delete SKU for products if not required.
 
a.
SKU No.: 2071; 4 inch bolt length, adjustable pintel offset.
b.
SKU No.: 2072; 6 inch bolt length, adjustable pintel offset.
c.
SKU No.: 2076; Philadelphia style, 4 inch bolt length, 3/8 inch sleeve diameter, adjustable pintel offset.
7.
Drive Pintels: SKU No. 2080; 6 inch spike length, steel, black powder coated.
8.
Notched Pintels: SKU No.: 2075L, 2075R; left and right, heavy duty, hot rolled carbon steel, black powder coat, 3/16 inch thick, 4 inches L x 1-1/2 inches W, 1/2 inch sleeve diameter, 0 inch hinge offset.
9.
Notched Pintels: Philadelphia style, hot rolled carbon steel, black powder coat, 3/8 inch pin diameter, 2-1/2 inches L x 3/4 inch W, 1/8 inch thick.
 
** NOTE TO SPECIFIER ** Delete SKU for products if not required.
 
a.
SKU No.: 2085L, 2085R; pintel offset of 1 inch.
1)
Pintel Offset: 1 inch.
b.
SKU No.: 2086L, 2086R; left and right, pintel offset of 2 inches.
c.
SKU No.: 2087L, 2087R; left and right, pintel offset of 3 inches.
 
** NOTE TO SPECIFIER ** Two shutter tie-back heads and a lag mount kit are included that will allow for clearances from 1.5 inches to 3 inches. Longer mounting kits are available for custom applications. For added support and to eliminate rattling, a bullet catch is highly recommended and should be installed behind the shutter out of sight. A tubing cutter tool (SKU No. F50000) is recommended to expedite field installation. Delete if not required.
 
C.
Shutter Tiebacks: As manufactured Timberlane, Inc.; including manufacturer's standard hardware.
 
** NOTE TO SPECIFIER ** Delete tieback types if not required.
 
1.
Lag Mount Tiebacks: Black powder coated.
 
** NOTE TO SPECIFIER ** Delete SKU for products if not required.
 
a.
SKU No.: 35401S; "S" beveled, stainless steel, head height of 7 inches.
b.
SKU No.: 35501S; rat tail, stainless steel, head height of 5-3/4 inches.
c.
SKU No.: 35101; vintage grape, cast iron, head height of 5 inches.
d.
SKU No.: 35201; shell, cast iron, head height of 4 inches.
e.
SKU No.: 35301; star, cast iron, head height of 5 inches.
f.
SKU No.: 35401; "S" beveled, steel, head height of 7 inches.
g.
SKU No.: 35501; rat tail, steel, 7 inches.
h.
SKU No.: 35601; propeller, steel, 7-1/2 inches.
i.
SKU No.: 35701; antique flower, cast iron, head height of 4-1/2 inches
j.
SKU No.: 35751; scallop, cast iron, head height of 5 inches.
k.
SKU No.: 35755; flower, cast iron, head height of 5 inches.
l.
SKU No.: 35757; beveled curl, cast iron, head height of 5-3/4 inches.
m.
SKU No.: 35759; grape, cast iron, head height of 5 inches.
n.
SKU No.: 35801; soldier, steel, head height of 6-1/2 inches.
o.
SKU No.: 35901; Belmont (small), steel, head height of 5-1/2 inches.
p.
SKU No.: 35921; Belmont (medium), steel, head height of 6-1/2 inches.
q.
SKU No.: 35931; Belmont (large), steel, head height of 8-1/2 inches.
r.
SKU No.: 36001; Beacon Hill, steel, head height of 5-1/2 inches.
s.
SKU No.: 36010; Beacon Hill offset, steel, head height of 4 inches.
t.
SKU No.: 36401; English rat tail, steel, head height of 6-1/2 inches.
u.
SKU No.: 36410; English rat tail offset, steel, head height of 6-1/2 inches.
v.
SKU No.: 36501; "S" floral, steel, head height of 6-1/2 inches.
w.
SKU No.: 37201; sea horse, steel, 7 inches.
x.
SKU No.: 37801; dolphin, steel, 7 inches.
2.
Lag Mount Tiebacks: Bronze.
 
** NOTE TO SPECIFIER ** Delete SKU for products if not required.
 
a.
SKU No.: 36101; La Jeune Femme, plain, head height of 2-3/4 inches
b.
SKU No.: 36201; La Jeune Femme, patina, head height of 2-3/4 inches
c.
SKU No.: 36320; Acanthus Leaf, head height of 3 inches.
3.
Plate Mount Tiebacks: Black powder coated
 
** NOTE TO SPECIFIER ** Delete SKU for products if not required.
 
a.
SKU No.: 35102; vintage grape, cast iron, head height of 5 inches.
b.
SKU No.: 35202; shell, cast iron, head height of 4 inches.
c.
SKU No.: 35302; star, cast iron, head height of 5 inches.
d.
SKU No.: 35402; "S" beveled, steel, head height of 7 inches.
e.
SKU No.: 35502; rat tail, steel, head height of 5-3/4 inches.
f.
SKU No.: 35602; propeller steel, head height of 7-1/2 inches.
g.
SKU No.: 35702; antique flower, cast iron, 4-1/4 inches.
h.
SKU No.: 35802; soldier, steel, head height of 6-1/2 inches.
i.
SKU No.: 35902, Belmont (small), steel, head height of 5-1/2 inches.
j.
SKU No.: 35922; Belmont (medium), steel, head height of 6-1/2 inches.
k.
SKU No.: 35932; Belmont (large), steel, head height of 8-1/2 inches.
l.
SKU No.: 36002; Beacon Hill, steel, head height of 5-1/2 inches.
m.
SKU No.: 36011; Beacon Hill offset, steel, head height of 4 inches.
n.
SKU No.: 36402; English rat tail, steel, head height of 6-1/2 inches.
o.
SKU No.: 36411; English rat tail, offset, steel, head height of 6-1/2 inches.
p.
SKU No.: 36502; "S" floral, steel, head height of 6-1/2 inches.
q.
SKU No.: 37202; sea horse, steel, head height of 7 inches.
r.
SKU No.: 37802; dolphin, steel, head height of 7 inches.
4.
Sill Mount Tiebacks:
 
** NOTE TO SPECIFIER ** Delete SKU for products if not required.
 
a.
SKU No.: 35103; vintage grape, cast iron, head height of 5 inches.
b.
SKU No.: 35203; shell, cast iron, head height of 4 inches.
c.
SKU No.: 35303; star, cast iron, head height of 5 inches.
d.
SKU No.: 35403; "S" beveled, steel, head height of 7 inches.
e.
SKU No.: 35503; rat tail, steel, head height of 5-3/4 inches.
f.
SKU No.: 35603; propeller steel, head height of 7-1/2 inches.
g.
SKU No.: 35703; antique flower, cast iron, 4-1/4 inches.
h.
SKU No.: 35803; soldier, steel, head height of 6-1/2 inches.
i.
SKU No.: 35903, Belmont (small), steel, head height of 5-1/2 inches.
j.
SKU No.: 35933; Belmont (medium), steel, head height of 6-1/2 inches.
k.
SKU No.: 35393; Belmont (large), steel, head height of 8-1/2 inches.
l.
SKU No.: 36003; Beacon Hill, steel, head height of 5-1/2 inches.
m.
SKU No.: 36403; English rat tail, steel, head height of 6-1/2 inches.
n.
SKU No.: 36412; English rat tail, offset, steel, head height of 6-1/2 inches.
o.
SKU No.: 36503; "S" floral, steel, head height of 6-1/2 inches.
p.
SKU No.: 37203; sea horse, steel, head height of 7 inches.
q.
SKU No.: 37803; dolphin, steel, head height of 7 inches.
 
** NOTE TO SPECIFIER ** Timberlane's bullet catch is highly recommended on all hinged shutter applications, regardless if a shutter tie back was used or not. Delete if not required.
 
5.
Bullet Catch Tiebacks: SKU No. 55101; unfinished copper, mounted on the rear of shutter, eliminates rattling
6.
Hooks and Staples: Stainless steel, black powder coated.
 
** NOTE TO SPECIFIER ** Delete SKU for products if not required.
 
a.
SKU No.: 52121S; 3/8 inch diameter, 12 inches in length.
b.
SKU No.: 52161S; 16 inches in length.
7.
Hooks and Staples: Steel, black powder coated.
 
** NOTE TO SPECIFIER ** Delete SKU for products if not required.
 
a.
SKU No.: 52121; 12 inches in length.
b.
SKU No.: 52161; 16 inches in length.
c.
SKU No.: 52181; 24 inches in length.
8.
New England Spring Latch: SKU No. 51001; galvanized steel.
 
** NOTE TO SPECIFIER ** Delete if not required.
 
D.
Locks: As manufactured Timberlane, Inc.; including manufacturer's standard hardware.
 
** NOTE TO SPECIFIER ** Delete lock slide bolt types not required.
 
1.
Slide Bolts: Stainless steel shutter locks, 2 inch height, black powder coated.
 
** NOTE TO SPECIFIER ** Delete SKU for products if not required.
 
a.
SKU No.: 3013S; overall length of 12 inches.
1)
Length of Bolt Plate: 7-7/8 inches.
b.
SKU No.: 30111S; overall length of 16 inches.
1)
Length of Bolt Plate: 11 inches.
2.
Slide Bolts: Steel shutter locks, black powder coated.
 
** NOTE TO SPECIFIER ** Delete SKU for products if not required.
 
a.
SKU No.: 30101; overall length of 16 inches, 2 inch height.
1)
Length of Bolt Plate: 11 inches.
b.
SKU No.: 30102; overall length of 12-3/4 inches, 1-3/4 inch height.
1)
Length of Bolt Plate: 9 inches.
c.
SKU No.: 30104; overall length of 10-3/4 inches, 2 inch height.
1)
Length of Bolt Plate: 7-1/4 inches.
d.
SKU No.: 30108; overall length of 10-1/8 inches, 1-11/16 inch height.
1)
Length of Bolt Plate: 6-7/8 inches.
e.
SKU No.: 30106; overall length of 7-3/4 inches, 1-3/4 inch height.
1)
Length of Bolt Plate: 6 inches.
f.
SKU No.: 30107; overall length of 5-1/4 inches, 1-1/2 inch height.
1)
Length of Bolt Plate: 4 inches.
g.
SKU No.: 30108; overall length of 8-5/8 inches, 2 inch height.
1)
Length of Bolt Plate: 6-3/8 inches.
h.
SKU No.: 30109; overall length of 8 inches.
i.
SKU No.: 30110; overall length of 3-5/8 inches, 1-3/8 inch height.
1)
Length of Bolt Plate: 3 inches.
 
** NOTE TO SPECIFIER ** Delete if not required.
 
E.
Pull Rings: As manufactured Timberlane, Inc.; including manufacturer's standard hardware.
 
** NOTE TO SPECIFIER ** Delete pull ring types if not required.
 
1.
Pull Rings: Stainless steel, 1.5 inch ring diameter, black powder coated.
 
** NOTE TO SPECIFIER ** Delete SKU for products if not required.
 
a.
SKU No.: 53101S; 2 inches L x 2 inches W plate.
b.
SKU No.: 53102S; 1-1/2 inches L x 2 inches W plate.
c.
SKU No.: 53103S.
d.
SKU No.: 53101; 2 inches L x 2 inches W plate.
2.
Pull Rings: Steel, 1.5 inch ring diameter, black powder coated.
 
** NOTE TO SPECIFIER ** Delete SKU for products if not required.
 
a.
SKU No.: 53102, 1-1/2 inches L x 2 inches W plate.
b.
SKU No.: 53103.
 
** NOTE TO SPECIFIER ** Delete if not required.
 
F.
Faux Hardware: As manufactured Timberlane, Inc.; including manufacturer's standard hardware.
 
** NOTE TO SPECIFIER ** Delete faux hardware types not required.
 
1.
Dummy Hinges: Black powder coated.
 
** NOTE TO SPECIFIER ** Delete SKU for products if not required.
 
a.
SKU No.: 106100; dummy strap hinges, cast iron, 9-1/4 in L x 1-1/2 in W.
b.
SKU No.: 106110; dummy strap hinges, cast iron, 13 in L x 1-3/4 in W.
c.
SKU No.: 106120; light weight strap hinge assembly, steel, 10 in L x 1.2 in W.
d.
SKU No.: 107000; dummy jamb hinges, 4 inch height, cast iron.
2.
Clavos Heads: Faux bolt heads, aluminum, black powder coated.
 
** NOTE TO SPECIFIER ** Delete SKU for products if not required.
 
a.
SKU No.: F38400; square clavos.
b.
SKU No.: F38410; round clavos.
c.
SKU No.: F38420; round clavos.
3.
Dummy Shutter Tiebacks: SKU No. 35401F; "S" beveled shutter faux tie-backs, cast iron, powder coated black, 7 inch head height.
 
** NOTE TO SPECIFIER ** Delete if not required.
 
G.
Bermuda Hardware: As manufactured Timberlane, Inc; including manufacturer's standard hardware.
 
** NOTE TO SPECIFIER ** Delete hardware types not required.
 
1.
Hinges: SKU No. 4070; continuous Bermuda hinges, unfinished mill aluminum.
2.
Hinges: SKU No. 11201; gravity butt style hinges, cast aluminum, black powder coat. Required fasteners included, shim plate maybe be required for functional applications.
a.
Hinge Height: 3 inches.
b.
Shutter Offset: 1-1/4 inches.
c.
Total Offset: 3 inches.
3.
Support Arms: Unfinished mill aluminum with required fasteners, adjusts, locks shutter at desired angle, in open or closed position.
 
** NOTE TO SPECIFIER ** Delete SKU for products if not required.
 
a.
SKU No.: 4080; up to 24 inches in length.
b.
SKU No.: 4090; up to 18 inches in length.
 
** NOTE TO SPECIFIER ** Delete if not required.
 
H.
Installation Items: In addition to manufacturer's standard installation items included with products, provide the following additional installation items as manufactured Timberlane, Inc.
1.
Quantities and Locations: as scheduled and indicated on Drawings.
 
** NOTE TO SPECIFIER ** Delete installation items listed below if not required.
 
2.
Installation Tools: Tubing Cutter, SKU No. F50000.
3.
Fasteners: Tapcon masonry screws for hardware, 3/16 inch x 2-1/4 inches, qty 50.
 
** NOTE TO SPECIFIER ** Delete SKU for products if not required.
 
a.
SKU No.: F38210; hex head.
b.
SKU No.: F38211; flat head.
4.
Fasteners: Stainless steel, for shutter hardware installation, qty 50.
 
** NOTE TO SPECIFIER ** Delete SKU for products if not required.
 
a.
SKU No.: F40100; pan head screws, No. 12 x 1-1/4 inches.
b.
SKU No.: F40150; flat head screws, stainless steel, No. 10 x 1-1/4 inches.
c.
SKU No.: F40200; flat head screws, stainless steel, No. 12 x 1-1/4 inches.
d.
SKU No.: F40250; flat head screws, stainless steel, No. 10 x 1 inch.
5.
Fastener Anchors:
 
** NOTE TO SPECIFIER ** Delete SKU for products if not required.
 
a.
SKU No.: F38180; masonry anchors for 1/4 inch lag bolts.
b.
SKU No.: F38181; masonry anchors for 3/8 inch lag bolts.
c.
SKU No.: F38182; masonry anchors for 1/2 inch lag bolts.
d.
SKU No.: F38200; staples, black powder coated, for hook and staple tie-backs.
6.
Washers: Black nylon; to protect paint abrasion and facilitate a smooth movement.
 
** NOTE TO SPECIFIER ** Delete SKU for products if not required.
 
a.
SKU No.: F38300; 1/2 inch inside diameter; used for 1/2 inch diameter pintels.
b.
SKU No.: F38303; 3/8 inch inside diameter; used for 3/8 inch diameter pintels.
c.
SKU No.: F38301, for No. 12 screws.
d.
SKU No.: F38302; for No. 10 screws.
7.
Spacers: SKU No. 2073; escutcheon plate, steel, black powder coated, 1/4 inch thick.
a.
Design: Shim plate gives appearance of plate pintel, allows use of a lag pintel.
b.
Dimensions: 4 inches L x 1-1/2 inches W.
8.
Shutter Capping: SKU No. 57101; shutter capping, unfinished aluminum, 1/4 inch leg.
 
** NOTE TO SPECIFIER ** If you are purchasing Timberlane shutters, custom aluminum drip capping will be included. Two standard inside dimensions available. Delete inside dimension not required.
 
a.
Inside Dimension: 1 inch.
b.
Inside Dimension: 1-5/16 inches.
9.
Tieback Mounting Kits:
 
** NOTE TO SPECIFIER ** Delete SKU for products if not required.
 
a.
SKU No.: 36000; lag mount shutter tie-back mounting kits, steel, black powder coated, contains hardware to install two shutters per kit.
1)
Furrel Tubing: Covers lag mount, provided intentionally long (3 inches); designed for field cutting with Tubing Cutter (SKU No. F50000).
b.
SKU No.: 36100; plate mount shutter tie-back mounting kits, steel, black powder coated, contains hardware to install two shutters per kit.
c.
SKU No.: 36200; sill mount shutter tie-back mounting kits, steel, black powder coated, contains hardware to install two shutters per kit.
PART 3 EXECUTION
 
3.1
EXAMINATION AND PREPARATION
A.
Inspect and prepare substrates and openings using the methods recommended by the manufacturer for achieving best result for the substrates and openings under project conditions.
B.
Do not proceed with installation until substrates and openings have been prepared using the methods recommended by the manufacturer and deviations from manufacturer's recommended tolerances are corrected. Commencement of installation constitutes acceptance of conditions.
C.
If preparation is the responsibility of another installer, notify Architect in writing of deviations from manufacturer's recommended installation tolerances and conditions.
3.2
INSTALLATION
A.
Install in accordance with manufacturer's recommended installation instructions for project conditions. Install in proper relationship with adjacent construction. Test for proper operation and adjust until satisfactory results are obtained.
3.3
PROTECTION
A.
Protect installed products until completion of project.
B.
Touch-up, repair or replace damaged products before Substantial Completion.
END OF SECTION