Download SECTION12 12 30 for
WORD | RTF | Text | Word Perfect
Find over 500 more CSI Sections
on Arcat.com
Switch to Masterformat 95
 
SECTION12 12 30
 
 
ART HANGING AND DISPLAY SYSTEMS
Copyright 2016 - 2016 ARCAT, Inc. - All rights reserved
** NOTE TO SPECIFIER ** AS Hanging Display Systems; art and display interior specialty fittings.
This section is based on the products of AS Hanging Display Systems, which is located at:
8396 State Route 9
West Chazy, NY 12992
Toll Free Tel: 866-935-6949
Email: request info (info@ashanging.com)
Web: www.ashanging.com
[ Click Here ] for additional information.
AS Hanging Display Systems has been active in the area of art and display and interior specialty fittings since 1964, and a manufacturer and distributor of hanging systems for more than two decades, having completed over 35,000 installations in North America.
The breadth of product lines, quality of solutions, and professional service enables the company to continue leadership in providing unique hardware support for art, display materials and signage to a vast variety of business categories and institutions including museums and art galleries, custom framing enterprises, retail stores, education, libraries, commercial office buildings, hospitality and health care markets.
After all, we honestly believe that when you call you are choosing to do business with us, the people that collectively make AS Hanging Display Systems. We believe you choose to do business with people and not a company. "Hang with the Best"
 
PART 1 GENERAL
 
1.1
SECTION INCLUDES
 
** NOTE TO SPECIFIER ** Delete items below not required for project.
 
A.
Hanging or display systems including the following:
1.
Display Reveal System.
2.
Contempo System.
3.
Click Rail System.
4.
Classic Gallery System.
5.
Cable System.
6.
Pier Based Cable System.
7.
Acrylic Pocket Display.
8.
Casso Display Art Rail.
B.
Workplace solutions including the following:
1.
Bulletin Bar / Horizontal Bulletin Rail.
2.
Boardless Bulletin Board.
3.
Footprintless Easel.
4.
Patient Get Well Card Rail.
5.
Menu Display Kits.
6.
Office Panel Hanging Kits.
1.2
RELATED SECTIONS
 
** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.
 
A.
Section 06 10 00 - Rough Carpentry.
1.3
SUBMITTALS
A.
Submit under provisions of Section 01 30 00 - Administrative Requirements.
B.
Product Data: Manufacturer's data sheets on each product to be used, including:
1.
Preparation instructions and recommendations.
2.
Storage and handling requirements and recommendations.
3.
Installation methods.
C.
LEED Submittals:
1.
Product Data for Credit MR 4.1 and Credit MR 4.2: For products having recycled content, submit documentation indicating percentages by weight of postconsumer and preconsumer recycled content. Include statement indicating cost for each product having recycled content.
2.
Product Data for Credit EQ 4.2: For paints and coatings, submit documentation including VOC content.
3.
Product Certificates for Credit MR 5.1 and Credit MR 5.2: For products and materials required to comply with requirements for regional materials, submit certificates indicating location of material manufacturer and point of extraction, harvest, or recovery for each raw material. Include statement indicating distance to Project, cost for each regional material, and fraction by weight that is considered regional.
 
** NOTE TO SPECIFIER ** Include Shop Drawings only for work that involves custom fabrication or if Shop Drawings are typically prepared to assist in the performance of the work involved. Delete if not required.
 
D.
Shop Drawings: Include details of construction, and relationship with adjacent construction.
E.
Verification Samples: For each finish product specified, two samples, minimum size 6 inches square representing actual product, color, and patterns.
1.4
QUALITY ASSURANCE
A.
Manufacturer Qualifications: Minimum 5 year experience manufacturing similar products.
B.
Installer Qualifications: Minimum 2 year experience installing similar products.
 
** NOTE TO SPECIFIER ** Include a mock-up if the project size and/or quality warrant taking such a precaution. The following is one example of how a mock-up on a large project might be specified. When deciding on the extent of the mock-up, consider all the major different types of work on the project.
 
C.
Mock-Up: Provide a mock-up for evaluation of surface preparation techniques and application workmanship.
1.
Finish areas designated by Architect.
2.
Do not proceed with remaining work until workmanship is approved by Architect.
3.
Remodel mock-up area as required to produce acceptable work.
1.5
PRE-INSTALLATION MEETINGS
A.
Convene minimum two weeks prior to starting work of this section.
1.6
DELIVERY, STORAGE, AND HANDLING
A.
Deliver and store products in manufacturer's unopened packaging bearing the brand name and manufacturer's identification until ready for installation.
B.
Handling: Handle materials to avoid damage.
1.7
PROJECT CONDITIONS
A.
Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's recommended limits.
1.8
SEQUENCING
A.
Ensure that products of this section are supplied to affected trades in time to prevent interruption of construction progress.
1.9
WARRANTY
A.
Warranty: Submit manufacturer's standard limited one year warranty.
PART 2 PRODUCTS
 
2.1
MANUFACTURERS
A.
Acceptable Manufacturer: AS Hanging Display Systems, which is located at: 8396 State Route 9; West Chazy, NY 12992 ; Toll Free Tel: 866-935-6949 ; Email: request info (info@ashanging.com); Web: www.ashanging.com
B.
Web: http://www.ashanging.com.
 
** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.
 
C.
Substitutions: Not permitted.
D.
Requests for substitutions will be considered in accordance with provisions of Section 01 60 00 - Product Requirements.
 
** NOTE TO SPECIFIER ** TENSIONED vs. SUSPENDED CABLES/RODS: Simply, suspended cable/rod systems suspend cable/rod from above. All of the following track-based systems will accomplish that.
For sleek, architectural impact, a Tensioned Cable System offers an engineered appearance that allows displayed items to "float" in front of a wall surface, tensioned between the ceiling and the floor (or between upper and lower points). Using specialized picture hanging hardware, the cable is attached from an upper track down to a lower track, or alternately, between pairs of standoffs (piers), allowing the cable to be tensioned between the upper and lower points. The result is a sophisticated, modern look that features parallel cables running from above to below the hanging object. The company's rod based systems may be deployed in similar manner. Tensioned Cable Hanging System hardware may be used to add tension to any of AS Hanging track-based cable systems except those based on the Display Reveal.
Alternatively, you can use the company's standoff components, point-to-point piers, in place of tracks to create a clean, organized, and aesthetically pleasing display. The pier-based cable system is recommended if you are looking to create a permanently mounted display. Ideal uses include window merchandising, visual space dividers, directional signage, art, municipal announcements or even cafe menus, etc. If you plan to reposition your cables and rods frequently, a track-based solution is recommended as they allow changes to horizontal spacing with ease.
** NOTE TO SPECIFIER ** The DISPLAY REVEAL SYSTEM is based on the only imbedded reveal that also serves as a display or art hanging system track. When is not in use the track appears just as any other reveal and is flush with the wall surface. However, do not mistake it with commonly available wall reveals. This design is patented and the design transfers weight suspended from cables and/or rods into the reveal cavity avoiding reliance on the reveal lip. Do not mix and match vertical components with those from other manufacturers. Consult AS Hanging for the best hanging configuration of cables/rods and hooks once building is occupied and art, display materials, notices and signage have been selected including framed and non-framed media due to weight and other variations among the objects to be hung. Delete if not required.
 
2.2
REVEAL HANGING AND DISPLAY SYSTEM
A.
Display Reveal System as manufactured by AS Hanging Display Systems. Provide materials and components required to provide a complete system by AS Hanging Display Systems for hanging corporate branding, display materials, informational and directional signage, art and regulatory notices, with reveal track as indicated or scheduled. Refer to Drawings.
 
** NOTE TO SPECIFIER ** When using cables/rods, the system is to be used with a single track and suspended cables/rod. However, for creative and aesthetic purposes parallel runs of reveal may be specified. Delete configuration not required.
 
1.
Configuration: Suspended Cables.
2.
Configuration: Suspended Rods.
3.
Aesthetic: Flush-mounted (sub-surface) reveal that doubles as a track.
4.
Display Reveal: Imbedded within wall, with no exposed fasteners.
5.
Track Weight Capacity: minimum of 110 lb./linear foot.
6.
Vertical Component: Stainless cables and Nylon cords, Aluminum and Stainless rods.
 
** NOTE TO SPECIFIER ** Delete options not required.
 
7.
Option: Anti-theft variant. (Rod based solution).
8.
Option: Earthquake zone/preparedness variant.
B.
Display Reveal: Aluminum(patented).
1.
Finish: Silver, satin anodized.
C.
Vertical Component/Cable:
 
** NOTE TO SPECIFIER ** Delete P-End Cable/Cord not required.
 
1.
Cable: P-End Stainless Steel Cable. Minimum weight capacity; 45 lbs
 
** NOTE TO SPECIFIER ** Nylon cord can be used for suspended configuration only. Delete if not required.
 
2.
Cord: P-End Transparent Nylon Cord. Minimum weight capacity; 15 lbs
 
** NOTE TO SPECIFIER ** Delete cable/cord length not required. Extra cable length may be coiled and hidden behind framed objects. Specify length and material.
 
3.
Cable Length: 48 inches.
4.
Cable Length: 72 inches.
5.
Cable Length: 96 inches.
6.
Cable Length: 120 inches.
D.
Vertical Component/Rod:
 
** NOTE TO SPECIFIER ** Delete P-End Rods not required.
 
1.
Rod: P-End Rod, Stainless Steel.
2.
Rod: P-End Rod, Aluminum.
3.
Rod: Anti-Theft Rod, Aluminum.
 
** NOTE TO SPECIFIER ** Delete rod lengths not required. Specify length and material. Extra length may be removed in field.
 
4.
Rod Length (stainless steel only): 12 inches (30 cm).
5.
Rod Length: 24 inches.
6.
Rod Length: 48 inches.
7.
Rod Length: 60 inches.
8.
Rod Length: 72 inches.
9.
Rod Length: 96 inches.
 
** NOTE TO SPECIFIER ** Delete finishes not required.
 
10.
Aluminum Rod Finish: Silver Satin Anodized.
11.
Aluminum Rod Finish: Champagne Anodized.
12.
Aluminum Rod Finish: Black Anodized.
13.
Aluminum Rod Finish: Warm White (semi-gloss) Powder Coat. (Not available in 96 inches)
14.
Stainless Steel Rod Finish: Mill.
E.
Hooks: Provide manufacturer's recommended type and quantity of hooks.
 
** NOTE TO SPECIFIER ** CONTEMPO(R) SYSTEM is the most versatile system for mounting art, photography, corporate branding and other display material to wall surfaces without damage. The wall track is versatile in that it may adapt to curved walls and straight walls equally well. It ships flat and conforms to the shape of a wall during installation. It also allows the use of cables or rods as the vertical component, again emphasizing its versatility. The high-design appearance is a result of the narrow extruded rail that is mounting to the wall surface via small standoffs (spacers). Multiple choices of cables/rods may be inserted/removed anywhere along the run of track. Consult AS Hanging for the best hanging configuration of cables/rods and hooks once building is occupied and art, display materials, notices and signage have been selected including framed and non-framed media due to weight and other variations among the objects to be hung. Delete if not required.
 
2.3
HANGING AND DISPLAY SYSTEM
A.
ContempoSystem as manufactured by AS Hanging Display Systems. Provide materials and components required to provide a complete system by AS Hanging Display Systems for hanging corporate branding, display materials, informational and directional signage, art and regulatory notices, with conforming track as indicated or scheduled. Refer to Drawings.
 
** NOTE TO SPECIFIER ** When using cables or rods, the system may be used with a single upper track and suspended cables/rods, or in conjunction with a matched lower track to hold the cables/rods in tension. Delete configuration(s)/options not required.
 
1.
Configuration: Tensioned Cable/Rod.
2.
Configuration: Suspended Cable/Rod.
3.
Aesthetic: High design for architected public or residential spaces.
4.
Contempo Track: Open-face.
5.
Track Weight Capacity: minimum of 78 lb./6 foot track.
6.
Vertical Component: Stainless steel cables and Nylon cords. Aluminum and Stainless steel rods.
 
** NOTE TO SPECIFIER ** Delete options not required.
 
7.
Option: Earthquake zone/preparedness variant.
B.
Wall Segments: The track shall adapt to wall segments with a radius as small as 2 feet and work on concave, convex, serpentine and straight walls.
C.
Contempo Wall Track: Aluminum. (patented)
 
** NOTE TO SPECIFIER ** Delete finish not required. If specifying a tensioned solution, lower track must be accommodated but finish may differ from upper track. If track is to be field painted, specify "natural" finish.
 
1.
Finish: Natural.
2.
Finish: Silver, satin anodized.
3.
Finish: Champagne, satin anodized.
4.
Finish: Black satin anodized.
5.
Custom color, anodized.
 
** NOTE TO SPECIFIER ** Delete Track Connector not required. While this component is a nice finesse detail for straight run of adjacent track lengths, it is almost mandatory when tracks follow a curved surface.
 
6.
Contempo Track Connector: Silver Satin painted.
7.
Contempo Track Connector: Champagne painted.
8.
Contempo Track Connector: Black painted.
D.
Vertical Component/Cable:
 
** NOTE TO SPECIFIER ** Delete cables/cords not required.
 
1.
Material: Contempo Cable Stainless Steel. (Hanger color to match track) Minimum weight capacity; 45 lbs.
 
** NOTE TO SPECIFIER ** Nylon Cord to be used in suspended configuration only.
 
2.
Material: Contempo Cord Transparent Nylon. (Hanger color to match track) Minimum weight capacity; 15 lbs.
 
** NOTE TO SPECIFIER ** Delete cable length not required. Extra cable length may be coiled and hidden behind framed objects. Specify length and material. Tensioners will be needed to tension cables to lower track.
 
3.
Cable Length: 48 inches.
4.
Cable Length: 72 inches.
5.
Cable Length: 96 inches.
6.
Cable Length: 120 inches.
 
** NOTE TO SPECIFIER ** Delete cable tensioner if not required.
 
7.
Provide cable tensioner (to match primary cable)
E.
Vertical Component/Rod:
 
** NOTE TO SPECIFIER ** Delete rods not required. Extra length may be removed in field.
 
1.
Material: Aluminum P-End Rod. Minimum weight capacity; 70 lbs.
2.
Material: Stainless P-End Rod. (mill finish) Minimum weight capacity; 110 lbs.
 
** NOTE TO SPECIFIER ** Delete rod length not required. Specify length and material. Rod-End Hanger will be needed to attach rods to lower track.
 
3.
Rod Length: 24 inches.
4.
Rod Length: 48 inches.
5.
Rod Length: 60 inches.
6.
Rod Length: 72 inches.
7.
Rod Length: 96 inches.
 
** NOTE TO SPECIFIER ** Delete Rod-End Hanger (tensioner) if not required.
 
8.
Provide Rod-End Hanger. (patented)
 
** NOTE TO SPECIFIER ** Delete finish not required.
 
9.
Aluminum Rod Finish: Silver, satin anodized.
10.
Aluminum Rod Finish: Champagne, anodized.
11.
Aluminum Rod Finish: Black, anodized.
12.
Aluminum Rod Finish: White (warm), semi-gloss painted.
F.
Hooks: Provide manufacturer's recommended type and quantity of hooks.
 
** NOTE TO SPECIFIER ** CLICK RAIL SYSTEM is the most discreet surface mounted hanging system. It features closed face track that hides all mounting hardware and blends nicely into a wide variety of interior design schemes from contemporary to industrial to traditional. It allows the designer freedom to mount at wall/ceiling intersection, mid-wall, hide behind finished carpentry, or within the reveal of a floating suspended ceiling perimeter. Patented cable ends allow insertion/removal of cables anywhere along the run of track and even shy of wall/ceiling intersection. Consult AS Hanging for the best hanging configuration of cables and hooks once building is occupied and art, display materials, notices and signage have been selected including framed and non-framed media due to weight and other variations among the objects to be hung. Delete if not required.
 
2.4
HANGING AND DISPLAY SYSTEM
A.
Click Rail System as manufactured by AS Hanging Display Systems. Provide materials and components required to provide a complete system by AS Hanging Display Systems for hanging corporate branding, display materials, informational and directional signage, art, regulatory notices, with rigid track as indicated or scheduled. Refer to Drawings.
 
** NOTE TO SPECIFIER ** The system may be used with a single upper track and suspended cables, or in conjunction with a matched lower track to hold the cables in tension. Delete configuration not required.
 
1.
Configuration: Tensioned Cable.
2.
Configuration: Suspended Cable.
3.
Aesthetic: Very discreet surface mount. For residential and business use.
4.
Click Rail Track: Closed-face.
5.
Track Weight Capacity: minimum of 78 lb./6 foot track
6.
Vertical Component: Stainless cables and nylon cords.
 
** NOTE TO SPECIFIER ** Delete options not required.
 
7.
Option: Anti-theft variant.
8.
Option: Earthquake zone/preparedness variant.
9.
Option: Sloped ceiling variant.
B.
Click Rail Wall Track: Aluminum.
 
** NOTE TO SPECIFIER ** Delete finish not required. If specifying tensioned cables lower track must be accommodated but finish may differ from upper track.
 
1.
Finish: Silver, satin anodized.
2.
Finish: Champagne, anodized.
3.
Finish: White (warm), semi-gloss powder-coat.
4.
Finish: White (cool), flat finish powder-coat.
5.
Finish: Black powder-coat.
6.
Finish: Honey Maple, light faux wood finish.
7.
Finish: Chestnut, dark faux wood finish.
8.
Finish: Custom Color, anodized.
9.
Finish: Custom Color, powder coat.
10.
Finish: Custom Finish, metal plating.
 
** NOTE TO SPECIFIER ** Delete End Cap not required. Only needed at end of runs to finish exposed ends.
 
11.
Click Rail Track End Cap: Grey (for Silver finish)
12.
Click Rail Track End Cap: Champagne.
13.
Click Rail Track End Cap: White.
14.
Click Rail Track End Cap: Black.
 
** NOTE TO SPECIFIER ** Delete Corner Connector not required. Suitable for both inside and outside 90-degree corners to avoid miter cuts.
 
15.
Click Rail Track Corner Connectors: Grey (for Silver finish).
16.
Click Rail Track Corner Connectors: Champagne.
17.
Click Rail Track Corner Connectors: White.
18.
Click Rail Track Corner Connectors: Black.
C.
Vertical Component/Cable:
 
** NOTE TO SPECIFIER ** Delete Twist-End Cables/Cords which are not required.
 
1.
Cable: Twist-End Stainless Steel Cable. (patented) Minimum weight capacity; 45 lbs.
 
** NOTE TO SPECIFIER ** Nylon cord can be used for suspended configuration only. Delete if not required.
 
2.
Cord: Twist-End Transparent Nylon. (patented) Minimum weight capacity; 15 lbs.
 
** NOTE TO SPECIFIER ** Delete length not required. Extra cable length may be coiled and hidden behind framed objects. Specify length, material. Tensioners will be needed to tension cables to a lower track.
 
3.
Cable (stainless)/Cord (Nylon) Length: 48 inches.
4.
Cable (stainless)/Cord (Nylon) Length: 72 inches.
5.
Cable (stainless)/Cord (Nylon) Length: 96 inches.
6.
Cable (stainless)/Cord (Nylon) Length: 120 inches.
 
** NOTE TO SPECIFIER ** Delete Twist-End Tensioner if not required.
 
7.
Twist-End Cable Tensioner. (patented)
D.
Hooks: Provide manufacturer's recommended type and quantity of hooks.
 
** NOTE TO SPECIFIER ** CLASSIC GALLERY SYSTEM is a commercial strength track and rod-based system that is heavy-duty and used most frequently in particular applications such as directional, informational, regulatory signage and public art displays, where one or more of the following criteria would indicate rods usage in place of cables, i) weight bearing capacity is the uppermost criteria, ii) security against object removal by petty crime may be an issue (anti-theft), iii) ease of use is a critical factor as in very frequently changing displays, iv) or the track is placed high on a wall and there is a preference to avoiding the use of ladders when moving wall objects (such as OSHA regulations). The system may use either wall or ceiling track, which can be combined with either of aluminum or stainless steel rods to obtain weight carrying capacity. Consult AS Hanging for the best hanging configuration of cables/rods and hooks once building is occupied and art, display materials, notices and signage have been selected including framed and non-framed media due to weight and other variations among the objects to be hung. Delete if not required.
 
2.5
HANGING AND DISPLAY SYSTEM
A.
Classic Gallery System as manufactured by AS Hanging Display Systems. Provide materials and components required to provide a complete system by AS Hanging Display Systems for hanging corporate branding, display materials, informational and directional signage, art and regulatory notices, with rigid track as indicated or scheduled. Refer to Drawings.
 
** NOTE TO SPECIFIER ** The system may be used with a single upper track and suspended rods, or in conjunction with a matched lower track to attach rods at the lower end. Delete configuration not required.
 
1.
Configuration: Tensioned Rod.
2.
Configuration: Suspended Rod.
3.
Aesthetic: Commercial grade track for art display and display making.
 
**NOTE TO SPECIFIER ** Delete track/mounting configuration not required.
 
4.
Wall Track: Open-face.
5.
Ceiling Track:
a.
To be mounted open face.
b.
To be mounted closed face.
6.
Track Weight Capacity:
a.
Wall Track: minimum of 300 lbs./6 foot track.
b.
Ceiling Track: minimum of 150 lbs./6 foot track.
7.
Vertical Component: Aluminum rods and Stainless rods.
 
**NOTE TO SPECIFIER ** Delete option not required.
 
8.
Option: Anti-Theft variant
9.
Option: Earthquake zone/preparedness variant
 
** NOTE TO SPECIFIER ** Delete Track not required.
 
B.
Classic Gallery System Wall Track: Aluminum
 
** NOTE TO SPECIFIER ** Delete finish not required. If specifying tensioned rods, lower track must be accommodated but finish may differ from upper track.
 
1.
Finish: Anodized Silver Satin.
2.
Finish: Anodized Champagne.
3.
Finish: Anodized Black.
4.
Finish: Powder coated: Warm White, semi-gloss.
5.
Custom Color: Anodized
6.
Custom Color: Powder coat
7.
Custom Color: Plating
 
** NOTE TO SPECIFIER ** Delete End-Cap not required. Only needed at ends of runs to finish exposed ends.
 
8.
Classic Gallery System Wall Track End Cap: Silver. (patented)
9.
Classic Gallery System Wall Track End Cap: Champagne. (patented)
10.
Classic Gallery System Wall Track End Cap: Black. (patented)
11.
Classic Gallery System Wall Track End Cap: White. (patented)
C.
Classic Gallery System Ceiling Track: Aluminum
 
** NOTE TO SPECIFIER ** Delete finish not required. If specifying tensioned rods, lower track must be accommodated but finish may differ from upper track.
 
1.
Finish: Anodized Silver Satin.
2.
Finish: Anodized Champagne.
3.
Finish: Anodized Black.
4.
Finish: Powder coated: Warm White, semi-gloss.
5.
Custom Color: Anodized
6.
Custom Color: Powder coat
7.
Custom Color: Plating
D.
Vertical Component: 4x4 mm square Rod
 
** NOTE TO SPECIFIER ** Delete rod type not required. Rod-End Hanger will be needed to attach rod to lower track for a tensioned rod solution.
 
1.
Rod: P-End Aluminum Rod: Minimum weight capacity; 70 lbs.
2.
Rod: J-End Aluminum Rod: Minimum weight capacity; 70 lbs.
3.
Rod: P-End Heavy-Duty Stainless Rod: Minimum weight capacity; 110 lbs.
4.
Rod: Anti-Theft Secure Aluminum Rod: Minimum weight capacity; 70 lbs.
 
** NOTE TO SPECIFIER ** Delete Rod-End Hanger for tensioning rod lower end if not required.
 
5.
Rod-End Hanger (For use with aluminum and stainless P-End rods.) (patented)
 
** NOTE TO SPECIFIER ** Delete length not required.
 
6.
Rod Length: 12 inches. (Stainless Steel only)
7.
Rod Length: 24 inches.
8.
Rod Length: 48 inches.
9.
Rod Length: 60 inches.
10.
Rod Length: 72 inches.
11.
Rod Length: 96 inches.
 
** NOTE TO SPECIFIER ** Delete finish not required.
 
12.
Aluminum Rod Finish: Silver Satin Anodized.
13.
Aluminum Rod Finish: Champagne Anodized.
14.
Aluminum Rod Finish: Black Anodized. (P-End only)
15.
Aluminum Rod Finish: Warm White (semi-gloss) Powder Coat. (P-End only. Not available in 96 inches)
16.
Stainless Steel Rod Finish: Mill.
E.
Hooks: Provide manufacturer's recommended type and quantity of hooks.
 
** NOTE TO SPECIFIER ** CABLE SYSTEM is a track and cable-based solution deployed from commercial strength open-faced track. Use either transparent nylon, or stronger steel cables. The hanging cable system is the perfect picture hanging solution for art displays, and particularly in galleries and museums, since these rails can support 300 lbs per track length. The use of cables for hanging pictures is less obtrusive than rods, which are also compatible with these tracks. The open face track design makes this system more convenient than our more discreet systems when used in rapidly changing decors. The wall track may be mounted behind finish carpentry, moldings, trim, etc. so it becomes unseen. The wall or ceiling track may be mounted within a soffit so it becomes unnoticed. Consult AS Hanging for the best hanging configuration of cables/rods and hooks once building is occupied and art, display materials, notices and signage have been selected including framed and non-framed media due to weight and other variations among the objects to be hung. Delete if not required.
 
2.6
HANGING AND DISPLAY SYSTEM
A.
Cable System as manufactured by AS Hanging Display Systems. Provide materials and components required to provide a complete system by AS Hanging Display Systems for hanging corporate branding, display materials, informational and directional signage, art and regulatory notices, with rigid track as indicated or scheduled. Refer to Drawings.
 
** NOTE TO SPECIFIER ** The system may be used with a single upper track and suspended cables, or in conjunction with a matched lower track to hold cables in tension. Delete configuration not required.
 
1.
Configuration: Tensioned Cables.
2.
Configuration: Suspended Cables.
3.
Aesthetic: Commercial grade track for art display and display making.
 
**NOTE TO SPECIFIER ** Delete track/mounting configuration not required.
 
4.
Wall Track: Open-face.
5.
Ceiling Track:
a.
To be mounted open face.
b.
To be mounted closed face.
6.
Track Weight Capacity:
a.
Wall Track: minimum of 300 lbs./6 foot track.
b.
Ceiling Track: minimum of 150 lbs./6 foot track.
7.
Vertical Component: Stainless cables and nylon cords.
 
**NOTE TO SPECIFIER ** Delete option not required.
 
8.
Option: Earthquake zone/preparedness variant
 
** NOTE TO SPECIFIER ** Delete Track not required.
 
B.
Cable System Wall Track: Aluminum
 
** NOTE TO SPECIFIER ** Delete finish not required. If specifying tensioned cables, lower track must be accommodated but finish may differ from upper track.
 
1.
Finish: Anodized Silver Satin.
2.
Finish: Anodized Champagne.
3.
Finish: Anodized Black.
4.
Finish: Powder coated: Warm White, semi-gloss.
5.
Custom Color; Anodized
6.
Custom Color; Powder coat
7.
Custom Color; Plating
 
** NOTE TO SPECIFIER ** Delete End-Cap not required. Only needed at ends of runs to finish exposed ends.
 
8.
Cable System Wall Track End Cap: Silver. (patented)
9.
Cable System Wall Track End Cap: Champagne. (patented)
10.
Cable System Wall Track End Cap: Black. (patented)
11.
Cable System Wall Track End Cap: White. (patented)
C.
Cable System Ceiling Track: Aluminum
 
** NOTE TO SPECIFIER ** Delete finish not required. If specifying tensioned cables, lower track must be accommodated but finish may differ from upper track.
 
1.
Finish: Anodized Silver Satin.
2.
Finish: Anodized Champagne.
3.
Finish: Anodized Black.
4.
Finish: Powder coated: Warm White, semi-gloss.
5.
Custom Color; Anodized
6.
Custom Color; Powder coat
7.
Custom Color; Plating
 
** NOTE TO SPECIFIER ** Delete Cable/Cord not required.
 
D.
Vertical Component: P-End Cable.
 
** NOTE TO SPECIFIER ** Delete P-End Cable/Cord not required.
 
1.
Cable: P-End Stainless Steel Cable. Minimum weight capacity; 45 lbs.
 
** NOTE TO SPECIFIER ** Nylon Cord to be used in suspended configuration only.
 
2.
Cord: P-End Transparent Nylon Cord (Clear). Minimum weight capacity; 15 lbs.
 
** NOTE TO SPECIFIER ** Delete cable/cord length not required. Extra cable length may be coiled and hidden behind framed objects. Specify length and material.
 
3.
Cable Length: 48 inches.
4.
Cable Length: 72 inches.
5.
Cable Length: 96 inches.
6.
Cable Length: 120 inches.
E.
Vertical Component: J-End Cable
 
** NOTE TO SPECIFIER ** Delete J-End Cable/Cord not required.
 
1.
Cable: J-End Stainless Steel Cable. (patented) Minimum weight capacity; 45 lbs.
 
** NOTE TO SPECIFIER ** Nylon Cord to be used in suspended configuration only.
 
2.
Cord: J-End Transparent Nylon Cord. (patented) Minimum weight capacity; 15 lbs.
 
** NOTE TO SPECIFIER ** Delete cable/cord length not required. Extra cable length may be coiled and hidden behind framed objects. Specify length and material.
 
3.
Cable Length: 48 inches.
4.
Cable Length: 72 inches.
5.
Cable Length: 96 inches.
6.
Cable Length: 120 inches.
 
** NOTE TO SPECIFIER ** Delete cable tensioner not required.
 
7.
P-End Cable Tensioner. (patented)
8.
J-End Cable Tensioner. (patented)
F.
Hooks: Provide manufacturer's recommended type and quantity of hooks.
 
** NOTE TO SPECIFIER ** Pier Based Tensioned Cable System is a cable-based solution deployed from commercial strength standoffs/piers to be mounted to walls/ceilings/floors, or other similar surfaces. Use only stainless steel cables. Point-to-point piers used in place of tracks to create a clean, organized, and aesthetically pleasing display. The pier-based cable system is recommended if you are looking to create a permanently mounted display. Ideal uses include window merchandising, visual space dividers, directional signage, art, municipal announcements or even cafe menus, etc. If you plan to reposition cables and rods frequently, a track system is recommended. Consult AS Hanging for the best hanging configuration of cables, hooks and specialty fittings once building is occupied and art, display materials, notices and signage have been selected including framed and non-framed media due to weight and other variations among the objects to be hung. Delete if not required.
 
2.7
TENSIONED CABLE AND DISPLAY SYSTEM
A.
Pier Based Cable System as manufactured by AS Hanging Display Systems. Provide materials and components required to provide a complete system by AS Hanging Display Systems for hanging corporate branding, display materials, informational and directional signage, art and regulatory notices, from point-to-point piers as indicated or scheduled. Refer to Drawings.
 
** NOTE TO SPECIFIER ** The system is configured from two or more cables, each held in tension between an upper and lower pier. Delete configuration not required.
 
1.
Configuration: Fixed Piers, brushed nickel finish (mounted to horizontal surfaces).
2.
Configuration: Articulated Piers, brushed nickel finish.
3.
Aesthetic: Commercial grade piers/standoffs for art display and display making.
 
**NOTE TO SPECIFIER ** Decorative Mounting Plate is required when mounting piers to drywall, or other crushable, surface. Delete if not required.
 
4.
Decorative Mounting Plate, brushed nickel finish
 
** NOTE TO SPECIFIER ** Delete cable length not needed. Cables are field trimmed to length.
 
5.
Cable Length: 10 ft., Stainless Steel
6.
Cable Length: 20 ft., Stainless Steel (Fixed Pier only)
B.
Hooks: Provide manufacturer's recommended type and quantity of hooks needed to complete the intended display.
 
** NOTE TO SPECIFIER ** The Pocket Display System is endlessly versatile and is ideal for displaying a series of themed items. You can deploy piers or tracks to mount stainless steel cables, which in turn present acrylic pockets. Then, transform your wall into an engaging visual presentation. Pockets are available in both letter and tabloid sizes and in portrait and landscape orientation. There are an abundant number of ways you can make use of pocket displays. Our customers have employed them to create brag walls, show real estate listings, display children's art, display public notices, showcase photography and more. This system is smartly designed so you can update your hanging items as frequently as desired. Delete if not required.
 
2.8
ACRYLIC POCKET DISPLAY
A.
Acrylic Pocket Display by AS Hanging Display Systems. Provide materials and components required to construct a complete system by AS Hanging Display Systems for hanging corporate branding, display materials, art, lobby material, regulatory notices, etc. from point-to-point piers as indicated or scheduled. Refer to Drawings.
 
** NOTE TO SPECIFIER ** System may be anchored by any of the company's following tracks as identified earlier. (2.3 Contempo Track, 2.4 Click Rail Track, 2.5 Classic Gallery System, 2.6 Cable System, 2.7 Piers Based Cable System). Retain appropriate article above to fully define mounting technique. Delete mounting techniques not required.
 
B.
Mounting Technique:
1.
Contempo Track (with Contempo Cable, Stainless Steel - Hanger color to match track). Cable is to be supplied with matching Cable Tensioner.
2.
Click Rail Track (Twist-End Cables, Stainless Steel). Cable is to be supplied with matching Cable Tensioner.
3.
Cable System Wall Track (with P-End Cable, Stainless Steel). Cable is to be supplied with matching Cable Tensioner.
4.
Cable System Ceiling Track (mounted Open Face), (with J-End Cable, Stainless Steel). Cable is to be supplied with matching Cable Tensioner.
5.
Cable System Ceiling Track (mounted Closed Face), (with P-End Cable, Stainless Steel). Cable is to be supplied with matching Cable Tensioner.
6.
Fixed Piers (Supplied with Stainless Steel Cables):
 
** NOTE TO SPECIFIER ** Delete cable length not required.
 
a.
10 ft. cables
b.
20 ft. cables
7.
Articulated Piers (Supplied with 10 ft. Stainless Steel Cables).
C.
Pocket (Refer to drawing for schedule and quantity.)
1.
Material: 1/8 inch (3 mm) thick crystal clear acrylic sheet.
2.
Fabrication: Edges are to be polished to draw less attention. Pockets incorporate a tab on both left and right sides to be used to mount the pockets.
3.
Size:
 
** NOTE TO SPECIFIER ** Delete pocket size not required.
 
a.
8.5 x 11 inch live area.
b.
11 x 17 inch live area.
4.
Orientation:
 
** NOTE TO SPECIFIER ** Delete pocket orientation not required.
 
a.
Portrait.
b.
Landscape.
D.
Fittings: (Refer to Drawing for schedule and quantity.)
 
** NOTE TO SPECIFIER ** Delete side clamp type not required.
 
1.
Pocket Fittings: Pro Side Clamp, Single-Sided, Small. Machined clear anodized aluminum to maintain machining marks. Supply with Nylon tipped set screw.
2.
Pocket Fittings: Pro Side Clamp, Double-Sided, Small. Machined clear anodized aluminum to maintain machining marks. Supply with Nylon tipped set screw.
3.
Pocket Fittings: Econo Side Clamp, Single-Sided. Machined matte anodized aluminum.
4.
Pocket Fittings: Econo Side Clamp, Double-Sided. Machined matte anodized aluminum.
2.9
DISPLAY ART RAIL
 
** NOTE TO SPECIFIER ** A display art rail is sometimes referred to as a map rail or tack rail. It features closed face track that hides all mounting hardware and blends nicely into a wide variety of interior design schemes. The design not only avoids rollers and fasteners but also does not deploy hinged design. Thus, Casso(R) Display Rail may be placed behind trim carpentry to mask its appearance. It is appropriate in school classrooms and corridors to display youth art and schoolwork because it avoids push pins and thumbtacks. Rails may be placed end-to-end to expand capacity to support the entire class. Or place a short length within a classroom for use as the instructor's motivational wall. The "top" two or three results from an assignment earn a placement on the wall. Yet the postings may be changed several times a day. Keep the kids motivated. The design does not require the use of cork making it less susceptible to graffiti. The company offers a "White Paper" contrasting Casso Display Rail to common Cork Rail. This is the reformulated answer to cork rails.
 
A.
Casso Display Rail as manufactured by AS Hanging Display Systems. Features an internal wiper to grasp display papers. Display material inserts from below display rail.
1.
Material: Extruded aluminum.
2.
Bulletin bar/ display rail system that eliminates use of:
a.
Tacks, push pins, staples, and other fasteners for displayed items.
b.
Rollers to hold displayed items (eliminates binding even with stapled items).
c.
Hinge type mechanisms.
3.
Extendable on both ends in a continuous installation.
4.
End Caps: Matching finish of extrusion.
5.
Readily accepts variable material thicknesses up to 2mm thick (mat board mounted art).
6.
Mounting:
a.
Does not require direct fastening.
b.
May be mounted to gypsum board, plaster and lath, brick, concrete block, and a variety of other wall surfaces,
c.
May be mounted behind crown moldings, other finish carpentry, or other interior design features.
d.
Shall not have exposed fasteners.
e.
Shall not be drilled to receive fasteners.
f.
Fasteners and hardware shall be supplied for mounting.
 
** NOTE TO SPECIFIER **Delete track length not required. Track may mounted end-to-end in a continuous run.
 
7.
Track Length:
a.
24 inches.
b.
72 inches.
8.
Finish:
 
** NOTE TO SPECIFIER **Delete finish not required.
 
a.
Anodized, Silver Satin.
b.
Powder Coat, White.
 
** NOTE TO SPECIFIER ** Our collection of pre-packaged business hanging products include novel bulletin boards, easels that have no footprint, solutions for menu displays, and a method for displaying Get Well cards in patient stay rooms. Browse through AS Hanging's workplace solutions to find a display system that meets the demands of any workplace or business. Delete if not required.
 
2.10
WORKPLACE SOLUTIONS
 
** NOTE TO SPECIFIER **The Casso(R) Bulletin Bar/Horizontal Bulletin Rail is ideal for use in many area of most commercial projects. It features closed face track that hides all mounting hardware and blends nicely into a wide variety of interior design schemes. Most commonly deployed where employees take a break, get coffee or water. It is a bulletin board that forces some order. Instead of a common bulletin board, that appears un-kept almost immediately, the Casso Rail's linear nature forces order in the horizontal dimension. It is always ready since it requires no fasteners. It is also very versatile in that it is compatible with 2-ply mount board and individual sheets and because it does not rely on internal rollers it will not jam, even if multiple pages are stapled. Management can post notices to staff and staff may use it to post ride shares, item for sale, sport team schedules, etc. Also commonly use in architectural, design, advertising, graphic design, product design, FF&E offices to compare and study various visual alternate design choices. It is also very good where you may otherwise deploy a note rail such as at an individual workstation. Delete if not required.
 
A.
Bulletin Bar/Horizontal Bulletin Bar: Casso Display Rail as manufactured by AS Hanging Display Systems. Features an internal wiper to grasp display papers. Display material inserts from below display rail.
1.
Material: Extruded aluminum.
2.
Bulletin bar/ display rail system that eliminates use of:
a.
Tacks, push pins, staples, and other fasteners for displayed items.
b.
Rollers to hold displayed items (eliminates binding even with stapled items).
c.
Hinge type mechanisms.
3.
Extendable on both ends in a continuous installation.
4.
End Caps: Matching finish of extrusion.
5.
Readily accepts variable material thicknesses up to 2mm thick (mat board mounted art).
6.
Mounting:
a.
Does not require direct fastening.
b.
May be mounted to gypsum board, plaster and lath, brick, concrete block, and a variety of other wall surfaces,
c.
May be mounted behind crown moldings, other finish carpentry, or other interior design features.
d.
Shall not have exposed fasteners.
e.
Shall not be drilled to receive fasteners.
f.
Fasteners and hardware shall be supplied for mounting.
 
** NOTE TO SPECIFIER **Delete track length not required. Track may mounted end-to-end in a continuous run.
 
7.
Track Length:
a.
24 inches.
b.
72 inches.
8.
Finish:
 
** NOTE TO SPECIFIER **Delete finish not required.
 
a.
Anodized, Silver Satin.
b.
Powder Coat, White.
 
** NOTE TO SPECIFIER ** The Boardless(R) Bulletin Board from AS Hanging Display Systems is the answer to disorganized and cluttered ad hoc bulletin boards. Comprised of acrylic pockets that are organized in rows and columns, the structure lends, and forces, a more organized appearance. Simply insert and remove posts to the pockets as needed. It is an "always ready" design as no fasteners are required. These structured bulleting boards are particularly effective where the target audience is comprised of multiple special interest groups such as at libraries, community centers, health clubs, HOA club houses, sport centers, country clubs, etc. In these situations a pocket(s) can be allocated to a special interest and this group can always expect their material in the same location. Boardless boards are expandable by adding additional pockets and/or cables to the initial kit. Delete if not required.
 
B.
Boardless Bulletin Board as manufactured by AS Hanging Display Systems. Each kit is to consist of upper and lower track (Silver Satin finish extruded aluminum Wall Track), all mounting hardware (consisting of painted head screws and screw anchors), stainless steel cables (10 ft. in length), acrylic pockets (portrait orientation 8.5 x 11 inch live area), single and/or double-sided side clamps. Cables are trimmed in the field and Cable Trim Kit is included. Delete kits not required.
1.
Kit Identifier: K6031EC
a.
Track Width: 3 feet
b.
Number of Pockets: 3 (3 columns x 1 row)
2.
Kit Identifier: K6032EC
a.
Track Width: 3 feet
b.
Number of Pockets: 6 (3 columns x 2 rows)
3.
Kit Identifier: K6033EC
a.
Track Width: 3 feet
b.
Number of Pockets: 9 (3 columns x 3 rows)
4.
Kit Identifier: K6034EC
a.
Track Width: 3 feet
b.
Number of Pockets: 12 (3 columns x 4 rows)
5.
Kit Identifier: K6242EC
a.
Track Width: 6 feet
b.
Number of Pockets: 8 (4 columns x 2 rows)
6.
Kit Identifier: K6243EC
a.
Track Width: 6 feet
b.
Number of Pockets: 12 (4 columns x 3 rows)
7.
Kit Identifier: K6252EC
a.
Track Width: 6 feet
b.
Number of Pockets: 10 (5 columns x 2 rows)
8.
Kit Identifier: K6253EC
a.
Track Width: 6 feet
b.
Number of Pockets: 15 (5 columns x 3 rows)
9.
Kit Identifier: K6262EC
a.
Track Width: 6 feet
b.
Number of Pockets: 12 (6 columns x 2 rows)
10.
Kit Identifier: K6263EC
a.
Track Width: 6 feet
b.
Number of Pockets: 18 (6 columns x 3 rows)
11.
Kit Identifier: K6264EC
a.
Track Width: 6 feet
b.
Number of Pockets: 24 (6 columns x 4 rows)
12.
Kit Identifier: K6281EC
a.
Track Width: 6 feet
b.
Number of Pockets: 8 (8 columns x 1 row)
13.
Kit Identifier: K6282EC
a.
Track Width: 6 feet
b.
Number of Pockets: 16 (8 columns x 2 rows)
 
** NOTE TO SPECIFIER ** Custom configurations are available. Contact our customer service department to discuss options for custom configurations.
 
14.
Custom Configuration:
a.
Track Width: ______.
b.
Number of Pockets: ______.
15.
Custom Configuration: As detailed on Drawings.
 
** NOTE TO SPECIFIER ** The Footprintless(R) Easel from AS Hanging Display Systems overcomes the weaknesses of common office easels. Let's face it. As an architect and design professional you have to account for storage closets to store such things as easels for conference rooms. Then the common easel, with one leg longer that the other two, does not "store" well. When it comes to use these conference room easels often before top heavy and unstable during a presentation. The height is fixed and we all know how hard it is to write on an easel pad when writing below waist level. Footprintless Easel fixes all of this. It is mounted to the wall and is always ready without consuming precious space. No tripping or egress issues. It can hold an easel pad, any mount board and individual paper sheets. However, all of these are adjustable in height - presenters may adjust their materials to their height and comfort. For custom variations, contact our customer service group. Delete if not required.
 
C.
Footprintless Easel as manufactured by AS Hanging Display Systems is the basis of design. Easels are wall mounted and have a span height of 48 inches. Each kit consists of upper and lower track (Wall Track), all mounting hardware (consisting of painted screw heads and screw anchors), preconfigured stainless steel cables with the required specialty hooks. Delete kits not required.
 
** NOTE TO SPECIFIER **Delete track color not required.
 
1.
Track Color: Silver Satin.
2.
Track Color: Black.
 
** NOTE TO SPECIFIER **Delete size not required.
 
3.
Size: Single: 36 inches.
4.
Size: Double: 72 inches. (Double-wide easel includes two pair of cable hardware sets.)
 
** NOTE TO SPECIFIER **Healthcare/Patient Care: Greeting Card Wall Organizer Casso(R) Display Rail from AS Hanging Display Systems solves a nuisance problem in patient care facilities. What to do with Get Well cards? Typically they are placed on the small horizontal surface that doubles as a table from which meds and food are distributed. The surface is simply too small. The cards frequently fall to the floor where them become the vector for transferring germs to the food/meds surface. Besides, it is a highly trained, precious and over worked resource that picks these up - a medical professional. A wall segment will host a length of display rail for the purpose of displaying and holding Get Well cards within view but out of the way. Simply insert and remove cards to read. No fasteners are needed. It features closed face track that hides all mounting hardware and blends nicely into a wide variety of interior design schemes and also makes it acceptable to Infectious Disease Control. In the Pediatrics Dept. the same rail can hold child patient art with the same ease.
 
D.
Healthcare/Patient Care: Greeting Card Wall-Organizer. Casso Display Rail as manufactured by AS Hanging Display Systems. Features an internal wiper to grasp display papers. Display material inserts from below display rail.
1.
Material: Extruded aluminum.
2.
Bulletin bar/ display rail system that eliminates use of:
a.
Tacks, push pins, staples, and other fasteners for displayed items.
b.
Rollers to hold displayed items (eliminates binding even with stapled items).
c.
Hinge type mechanisms.
3.
Extendable on both ends in a continuous installation.
4.
End Caps: Matching finish of extrusion.
5.
Readily accepts variable material thicknesses up to 2mm thick (mat board mounted art).
6.
Mounting:
a.
Does not require direct fastening.
b.
May be mounted to gypsum board, plaster and lath, brick, concrete block, and a variety of other wall surfaces,
c.
May be mounted behind crown moldings, other finish carpentry, or other interior design features.
d.
Shall not have exposed fasteners.
e.
Shall not be drilled to receive fasteners.
f.
Fasteners and hardware shall be supplied for mounting.
 
** NOTE TO SPECIFIER **Delete track length not required. Track may mounted end-to-end in a continuous run.
 
7.
Track Length:
a.
24 inches.
b.
72 inches.
8.
Finish:
 
** NOTE TO SPECIFIER **Delete finish not required.
 
a.
Anodized, Silver Satin.
b.
Powder Coat, White.
 
** NOTE TO SPECIFIER **Menu Display Kits from AS Hanging Display Systems are designed to easily display restaurant, cafe or corporate food service menus. These kits supply everything you need to present menus, daily specials, reviews, photos and upcoming events in your windows, reception alcove or waiting area. Insert pages or photos, up to 8.5 x 11 inch (portrait orientation, into clear acrylic pockets via top openings. Changes are made without tools. Delete if not required.
 
E.
Menu Display Kit as manufactured by AS Hanging Display Systems.
1.
Each Kit Includes:
a.
Stainless Steel Cables: 10 feet, to be field trimmed.
b.
Articulated Piers: To attach cables to walls, window returns, ceilings, or floors.
c.
Mounting Hardware, including Decorative Mounting Plates to distribute forces against crushable surfaces.
d.
Acrylic Pockets: Portrait orientation 8.5 x 11 inch live area.
e.
Clamps: Single and/or double-sided side clamps.
f.
Cable Trim Kit.
 
** NOTE TO SPECIFIER ** Delete kits not required.
 
2.
Kit Identifier: K5011AA
a.
Number of pockets: 1 (1 column x 1 row)
3.
Kit Identifier: K5012AA
a.
Number of pockets: 2 (1 column x 2 rows)
4.
Kit Identifier: K5013AA
a.
Number of pockets: 3 (1 column x 3 rows)
5.
Kit Identifier: K5021AA
a.
Number of pockets: 2 (2 columns x 1 row)
6.
Kit Identifier: K5031AA
a.
Number of pockets: 3 (3 columns x 1 row)
 
** NOTE TO SPECIFIER ** Custom configurations are available. Contact our customer service department to discuss options for custom configurations.
 
7.
Custom Configuration:
a.
Track Width: ______.
b.
Number of Pockets: ______.
8.
Custom Configuration: As detailed on Drawings.
9.
Compatibility: Mount to window header/sill, window returns, walls, ceiling/floor in any combination.
PART 3 EXECUTION
 
3.1
EXAMINATION
A.
Do not begin installation until substrates have been properly prepared.
B.
If substrate preparation is the responsibility of another installer, notify Architect of unsatisfactory preparation before proceeding.
3.2
PREPARATION
A.
Clean surfaces thoroughly prior to installation.
B.
Prepare surfaces using the methods recommended by the manufacturer for achieving the best result for the substrate under the project conditions.
3.3
INSTALLATION
 
** NOTE TO SPECIFIER ** Installation guidelines are provided with each shipment and are also downloadable at ASHanging.com.
 
A.
Install in accordance with manufacturer's instructions, approved submittals, and in proper relationship with adjacent construction.
 
** NOTE TO SPECIFIER ** Paragraph below is for Reveal Hanging and Display System only. This system requires blocking not required for the other systems. Delete if not required.
 
B.
Reveal Hanging and Display System: Review additional mounting and blocking requirements and verify that adequate blocking is provided.
3.4
CLEANING
A.
Clean installed system and remove excess materials.
B.
Deliver any unused cable and fittings to Owner.
3.5
PROTECTION
A.
Protect installed products until completion of project.
B.
Touch-up, repair or replace damaged products before Substantial Completion.
END OF SECTION