Customize this spec with SpecWizard
Download SECTION 32 31 00 ELECTRIC GATE OPERATORS for
WORD | RTF | Text | Word Perfect
Find over 500 more CSI Sections
on Arcat.com
Switch to Masterformat 95
 
SECTION 32 31 00
ELECTRIC GATE OPERATORS
 
 
Copyright 2006 - 2015 ARCAT, Inc. - All rights reserved
** NOTE TO SPECIFIER ** LiftMaster; Electric Gate Operators.
This section is based on the products of LiftMaster, which is located at:
300 Windsor Dr.
Oak Brook, IL 60523
Toll Free Tel: 800-282-6225
Fax: 630-516-8412
Email: request info (specs@liftmaster.com)
Web: LiftMaster.com
[ Click Here ] for additional information.
LiftMaster's full commercial and residential garage door operator/gate operator/access control product lines meet the needs of Architects, Designers, Engineers, and Specifiers in any design or conceptual plan, while offering 100 percent compliance with UL 325 safety and construction codes. Our entire product line also contributes to energy-efficiency credits for LEED green building certification from the U.S. Green Building Council. LiftMaster is a registered presenter of the American Institute of Architects and is approved to present any of our AIA CEUs at your firm's location. For learning objectives and to schedule a Lunch & Learn for your firm, please send a request to specs@LiftMaster.com.
To find a complete library of architectural specifications, shop drawings, CSI format 3-part specs, CAD, and BIM product renderings, visit LiftMaster.com.
 
PART 1 GENERAL
 
1.1
SECTION INCLUDES
 
** NOTE TO SPECIFIER ** Delete items below not required for project.
 
A.
Electric Gate Operators:
1.
Residential/Light Commercial DC Linear Actuator (LiftMaster Model LA500DC).
2.
Residential DC Linear Actuator (LiftMaster Model LA400DC).
3.
Solar Residential DC Linear Actuator (LiftMaster Model LA412DC).
4.
Commercial High Traffic DC Swing Gate Operator (LiftMaster Model CSW24U).
5.
Residential/Light Commercial DC Swing Gate Operator (LiftMaster Model RSW12U).
6.
Commercial AC swing gate operators (LiftMaster Model CSW200 Series).
a.
High-traffic commercial swing gate operators (LiftMaster Model CSW200501U).
b.
High-traffic commercial swing gate operators (LiftMaster Model CSW200101U).
c.
High-traffic/high-temperature commercial swing gate operators (LiftMaster Model CSW200ULDM).
7.
Commercial High Traffic DC Slide Gate Operator (LiftMaster Model CSL24U).
8.
Residential/Light Commercial DC Slide Gate Operator (LiftMaster Model RSL12U).
9.
Commercial AC slide gate operators (LiftMaster Model SL3000 Series).
a.
High-traffic commercial slide gate operators (LiftMaster Model SL3000501U).
b.
Dual-motor/high-temperature commercial slide gate operators (LiftMaster Model SL3000101U).
10.
Heavy-duty, industrial, gear-driven slide gate operators (LiftMaster Model SL595).
11.
Heavy-duty, industrial, gear-driven slide gate operators (LiftMaster Model SL585).
12.
High-performance commercial DC barrier gate operators with built-in Battery Backup (LiftMaster Model MA Series).
13.
High-speed commercial DC barrier gate operators with built-in Battery Backup (LiftMaster Model MAS Series High Speed).
14.
Heavy-duty industrial barrier gate operators (LiftMaster Model BG770).
15.
Heavy-duty industrial barrier gate operators (LiftMaster Model BG790).
16.
Commercial overhead door and gate operators (LiftMaster Model HCT Series).
a.
Overhead door and gate operators (LiftMaster Model HCTDCPKGU08).
b.
Overhead door and gate operators (LiftMaster Model HCTDCPKGU10).
c.
Overhead door and gate operators (LiftMaster Model HCTDCPKGU12).
B.
Monitored Photo Eyes
 
** NOTE TO SPECIFIER ** Delete items below not required for project.
 
1.
Monitored Retro-Reflective Photo Eyes (LiftMaster Model LMRRU)
2.
Monitored Through-Beam Photo Eyes (LiftMaster Model LMTBU)
1.2
RELATED SECTIONS
 
** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.
 
A.
Section 32 31 23 - Plastic Fences and Gates.
B.
Section 03 30 00 - Cast-in-Place Concrete.
C.
Section 11 12 26.13 - Parking Fee Coin Collection Equipment.
D.
Division 16 - Requirements for electrical connections.
1.3
REFERENCES
 
** NOTE TO SPECIFIER ** Delete references from the list below that are not actually required by the text of the edited section.
 
A.
National Electrical Manufacturers Association (NEMA): NEMA ICS 6 - Industrial Control and Systems: Enclosures.
B.
Underwriters Laboratories (UL): UL 325 - Standard for Safety for Door, Drapery, Gate, Louver, and Window Operators and Systems.
C.
Underwriters Laboratories (UL): UL 991 - Standard for Tests for Safety-Related Controls Employing Solid-State Devices.
D.
International Organization for Standardization: ISO 9001 - Quality Management Systems.
1.4
SUBMITTALS
A.
Submit under provisions of Section 01 30 00 - Administrative Requirements.
B.
Product Data: Equipment list, system description, electrical wiring diagrams for installation, and manufacturer's data sheets on each product to be used, including:
1.
Preparation instructions and recommendations.
2.
Storage and handling requirements and recommendations.
3.
Installation methods.
C.
Shop Drawings: Submit shop drawings showing layout, profiles, and product components, including anchorage, edge conditions, and accessories.
1.
Operation, installation, and maintenance manuals including wiring diagrams.
2.
Risers, layouts, and special wiring diagrams showing any changes to standard drawings.
1.5
DELIVERY, STORAGE, AND HANDLING
A.
Deliver, store, and handle materials and products in strict compliance with manufacturer's instructions and industry standards.
B.
Store products indoors in manufacturer's original containers and packaging, with labels clearly identifying product name and manufacturer. Protect from damage.
1.6
QUALITY ASSURANCE
A.
Manufacturer Qualifications: ISO 9001 Certified Manufacturer.
B.
Installer Qualifications: Installation performed by factory authorized contractor specifically trained in gate operation systems of the type found within this section.
1.
Provide documentation of maintenance and repair service availability for emergency conditions.
2.
Provide quarterly maintenance for one year following Substantial Completion of the Project.
1.7
WARRANTY
A.
Manufacturer's Standard Limited Warranty:
 
** NOTE TO SPECIFIER ** Applies to LiftMaster Models: LA500DC, LA400DC, LA412DC, BG770, BG790, SL585, SL595.
 
1.
Warranty Period: 2 years.
 
** NOTE TO SPECIFIER ** Applies to LiftMaster Models MA Series and MAS Series. Delete if not required.
 
2.
Warranty Period: 2 years for operator, 10 years for operator frame.
 
** NOTE TO SPECIFIER ** Applies to LiftMaster Models RSW12U, RSL12U. Delete if not required.
 
3.
Warranty Period: 3 years for residential applications.
 
** NOTE TO SPECIFIER ** Applies to LiftMaster Models HCTDCU Series. Delete if not required.
 
4.
Warranty Period: 5 years.
 
** NOTE TO SPECIFIER ** Applies to LiftMaster Model CSW24U, CSL24U, CSW200 Series and SL3000 Series. Delete if not required.
 
5.
Warranty Period: 5 years for commercial applications, 7 years for residential applications.
PART 2 PRODUCTS
 
2.1
MANUFACTURERS
A.
Acceptable Manufacturer: LiftMaster, which is located at: 300 Windsor Dr.; Oak Brook, IL 60523; Toll Free Tel: 800-282-6225; Fax: 630-516-8412; Email: request info (specs@liftmaster.com); Web: LiftMaster.com
 
** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.
 
B.
Substitutions: Not permitted.
C.
Requests for substitutions will be considered in accordance with provisions of Section 01 60 00 - Product Requirements.
2.2
GATE OPERATORS
 
** NOTE TO SPECIFIER ** Delete if not required.
 
A.
Gate Operators: LiftMaster LA500DC Residential/Light Commercial DC Linear Actuator.
 
** NOTE TO SPECIFIER ** To be UL 325 Compliant, two independent safety entrapment protection devices must be installed at each entrapment zone (the inherent reversing system in this gate operator counts as one device). Devices such as monitored photo eyes or edge sensors are required to be installed with this operator.
 
1.
LiftMaster LA500PKGU Single Actuator Arm package contains:
a.
LA500DC Single Actuator Arm
1)
Full length commercial housing corrosion resistant aluminum.
2)
Molecular bonded self-lubricating drive screw.
b.
LA500CONTU Control Box for single or master/second application.
2.
LiftMaster LA500DCS Second Actuator Arm with junction box and 40 foot (12.2 m) direct burial cable for primary/secondary applications.
3.
LiftMaster LA500CONTXLMU Alternate Control Box for single or master/second applications desiring more room for accessories or two 33 Ah batteries for solar applications.
4.
Compliance: UL Listed. Compliant to the UL 325, UL 991 and CSA C22.2 No. 247 standards.
a.
This model is intended for use in Class I, II, III and IV vehicular swing gate applications.
b.
To be UL 325 compliant, two independent safety entrapment protection devices must be installed at each entrapment zone (the inherent reversing system in this gate operator counts as one device). Devices such as monitored photo eyes or edge sensors are required to be installed with this operator.
c.
Only LiftMaster monitored photo eyes or edge sensors may be used with this operator to meet the UL 325 Standard.
5.
Monitored Safety Inputs: 3 inputs per board (main board and expansion board) totaling 6 inputs with any combination of up to:
a.
Main Board:
1)
1 Monitored Close Photo Eye input
2)
1 Monitored Open Photo Eye input
3)
1 Monitored Open Safety Edge or Open Photo Eye input
b.
Expansion Board
1)
2 Monitored Safety Edge or Photo Eye inputs (selectable for Open or Close).
2)
1 Monitored Photo Eye input (selectable for Open or Close).
c.
8 Monitored edges available when Transceiver is added.
6.
Electrical Power Requirements:
 
** NOTE TO SPECIFIER ** Delete power option not required.
 
a.
115V AC, single phase
b.
230V AC, single phase.
7.
Motor: 24V DC, with soft start/stop operation.
a.
Duty cycle: Continuous duty.
8.
Capacity: 12 foot (3658 mm) gate at 1,200 pounds (554 kg) or 18-foot (5486 mm) gate at 600 pounds (272 kg).
9.
Recommended Cycles per Day: 300.
10.
Gate Travel Speed: 90-degree opening in 15 to 18 seconds.
11.
Warranty: 2 years.
12.
Wormgear Reduction: Precision machined metal gears contained in lubrication housing.
13.
Battery Backup: Power Management system draws 14.8 mA when gate is idle. Provides 500 cycles on Battery Backup with two 7 Ah batteries with remote controls programmed.
14.
Standby Time: Provides up to 24 days of standby power in the event of a power loss (excluding accessories).
15.
Solar Capable: See daily solar cycle chart.
16.
Accessory Electrical Power Requirements: 24V DC 500 mA output, switched and unswitched power.
17.
Chassis: Commercial-duty die cast aluminum housing.
18.
Internet Connectivity: MyQ Technology
a.
902 to 928 MHz
b.
50-channel FHSS (Frequency Hopping Spread Spectrum).
c.
LiftMaster 828LM Internet Gateway enables monitoring and control of gate operators via internet-enabled smartphone, tablet or computer.
d.
Provides two-way communication between gate operator and MyQ accessories to enable remote open, close and monitoring of gate.
19.
Receiver:
a.
Security+ 2.0 3-channel on-board receiver, holds up to 50 remote controls (unlimited with use of 811LM/813LM), HomeLink compatible.
b.
Transmits 310 MHz, 315 MHz, 390 MHz.
20.
Inherent Reversing Sensor: Detects obstructions or increased loads. Reverses gate when closing or stops/reverses the gate when opening.
21.
Electronic Limits: Maintains accurate limit position throughout travel, even after using the manual release handle.
22.
Dual-gate operation capabilities to allow 2 separate gate operators to operate in unison at a single entrance. Standard control box compatible with single or dual gates with no extra parts.
23.
Wireless Dual-Gate Operation:
a.
Built-in wireless communication will operate primary and secondary operator without having to run a communication wire.
b.
Support for Through-beam photo eye in the wireless dual-gate setup. Can attach emitter and receiver to each operator, eliminating the communication wire between them.
24.
Bi-Part Delay: Selectable feature for dual-gate applications. Firmware monitors speed and position of each gate and adjusts speed as necessary to ensure primary gate closes last, avoiding potential damage to the gate.
25.
Synchronized Close: Selectable feature for dual-gate applications with curved driveways. Monitors the speed and position of each gate and adjusts speed as necessary to ensure both the gates close at the same time. Only available if two control boxes are used.
26.
LED Diagnostic Display: Simplifies installation and troubleshooting.
27.
Colored Terminal Blocks: Provides easy identification of safety and fire department inputs.
28.
Programmable Auxiliary Relays: 2 programmable relays with 6 settings each
a.
Pre-warning or gate-in-motion sounder.
b.
Switch on/off devices at open or Close Limits or while gate is in motion..
c.
Tamper detection if gate is pushed off Close Limit.
d.
Cycle quantity feedback.
e.
Red/Green light to control gate traffic.
29.
Quick Close, Anti-Tailgate: Quickly secures property, preventing unauthorized access.
30.
Sequenced Access Management: Capable of sequentially controlling the operator in tandem with barrier gate.
31.
Plug-in Loop Detector Inputs: Programmed inputs for shadow, interrupt and exit.
32.
Alarm Reset Button: Instantly resets the built-in safety alarm siren.
33.
Fire Department Compliant: Selectable settings allow gate to auto open on power failure or battery depletion.
34.
Surge Suppression: Industrial strength on high and low voltage outputs. Protects against lightning strikes at a 50-foot (15240 mm) radius.
35.
Emergency Release: Simple-to-use keyed release handle allows gate to be operated manually and maintain limit position once re-engaged.
36.
Chassis: Commercial-duty die cast aluminum housing.
37.
Operating Temperature Range: -4 degrees F (-20 degrees C) to 140 degrees F (60 degrees C)
 
** NOTE TO SPECIFIER ** Unit comes with MyQ Enabled Technology built in. Pair it with MyQ Enabled accessories to maximize the capabilities of MyQ Enabled Technology. Delete optional accessories if not required.
 
38.
MyQ Enabled Accessories:
a.
LiftMaster 828LM Internet Gateway: Allows remote monitoring from Internet-enabled computer or smartphone.
b.
LiftMaster 829LM Garage and Gate Monitor: Allows remote monitoring and operation.
c.
LiftMaster 823LM Remote Light Switch: Controls light remotely.
d.
LiftMaster 825LM Remote Light Control: Allows remote monitoring and operation.
 
** NOTE TO SPECIFIER ** Delete optional accessories if not required.
 
39.
Accessories: Safety Monitoring Devices:
a.
Monitored Photo Eyes and Wireless Edge Kits.
1)
LiftMaster LMRRU Reflective Photo Eyes.
2)
LiftMaster LMTBU Thru-Beam Photo Eyes.
3)
LiftMaster LMWEKITU Wireless Edge Kith with Transmitter and Receiver.
4)
LiftMaster LMWETXU Wireless Edge Transceiver
b.
Wired Monitored Edges (all require use of LMWEKITU)
1)
LiftMaster S Small Profile Monitored Edge
2)
LiftMaster L50 Large Profile Monitored Edge
3)
LiftMaster WS4 Wrap-Around 4 foot (1219 mm) square monitored edge
4)
LiftMaster WS5 Wrap-Around 5 foot (1524 mm) square monitored edge
5)
LiftMaster WS6 Wrap-Around 6 foot (1829 mm) square monitored edge
6)
LiftMaster WR4 Wrap-Around 4 foot (1219 mm) square monitored edge
7)
LiftMaster WR5 Wrap-Around 5 foot (1524 mm) square monitored edge
8)
LiftMaster WR6 Wrap-Around 6 foot (1829 mm) square monitored edge
40.
Accessories: Provide the optional accessories listed below.
a.
LiftMaster LOOPDETLM Plug-in Loop Detector
b.
LiftMaster KPW5 Wireless Commercial Keypad
c.
LiftMaster KPW250 - Wireless Commercial Keypad
d.
LiftMaster SP10W12V - 10W Solar Panel Kit
e.
LiftMaster MG1300 Maglock - 1,300 pound (590 kg) holding force.
f.
LiftMaster 892LT 2-button Security+ 2.0 Learning Remote Control
g.
LiftMaster 894LT 4-Button Security+ 2.0 Learning Remote Control
h.
LiftMaster 811LM 1-Button Encrypted DIP Remote Control
i.
LiftMaster 813LM 3-Button Encrypted DIP Remote Control
j.
LiftMaster EL1SS Stainless Steel Single/Multi-Tenant Telephone Entry System
 
** NOTE TO SPECIFIER ** Delete if not required.
 
B.
Gate Operators: LiftMaster LA400 Residential DC Linear Actuator.
 
** NOTE TO SPECIFIER ** To be UL 325 Compliant, two independent safety entrapment protection devices must be installed at each entrapment zone (the inherent reversing system in this gate operator counts as one device). Devices such as monitored photo eyes or edge sensors are required to be installed with this operator.
 
1.
LiftMaster LA400PKGU Single Actuator Arm Package contains:
a.
LA400DC Single Actuator Arm
b.
Cast aluminum corrosion-resistant body, stainless steel piston.
c.
LA400CONTU Control Box for single or master/second application.
2.
LiftMaster LA400DCS Second Actuator Arm with junction box and 40 foot (12.2 m) direct burial cable for primary/secondary applications.
3.
Compliance: UL Listed. Compliant to the UL 325, UL 991 and CSA C22.2 No. 247 standards.
a.
This model is intended for use in Class I, II, III and IV vehicular swing gate applications.
b.
To be UL 325 compliant, two independent safety entrapment protection devices must be installed at each entrapment zone (the inherent reversing system in this gate operator counts as one device). Devices such as monitored photo eyes or edge sensors are required to be installed with this operator.
c.
Only LiftMaster monitored photo eyes or edge sensors may be used with this operator to meet the UL 325 Standard.
4.
Monitored Safety Inputs: 3 inputs per board (main board and expansion board) totaling 6 inputs with any combination of up to:
a.
Main Board:
1)
1 Monitored Close Photo Eye input
2)
1 Monitored Open Photo Eye input
3)
1 Monitored Open Safety Edge or Open Photo Eye input
b.
8 Monitored edges available when Transceiver is added.
5.
Electrical Power Requirements: 115V AC, single phase
6.
Motor: 24V DC, with soft start/stop operation.
a.
Duty cycle: Continuous duty.
7.
Capacity: 16-foot (4877 mm) gate at 550 pounds (249 kg).
8.
Recommended Cycles per Day: 100.
9.
Gate Travel Speed: 90-degree opening in 15 to 18 seconds.
10.
Warranty: 2 years.
11.
Wormgear Reduction: Precision machined metal gears contained in lubrication housing.
12.
Battery Backup: Power Management system draws 3.7 mA when gate is idle with remote controls programmed. Provides 400 cycles on Battery Backup with two 7 Ah batteries.
13.
Standby Time: Provides up to 97 days of standby power in the event of a power loss (excluding accessories).
14.
Solar Capable: See daily solar cycle chart.
15.
Accessory Electrical Power Requirements: 24V DC 500 mA output, switched and unswitched power.
16.
Chassis: Commercial-duty die cast aluminum housing.
17.
Internet Connectivity: MyQ Technology
a.
902 to 928 MHz
b.
50-channel FHSS (Frequency Hopping Spread Spectrum).
c.
LiftMaster 828LM Internet Gateway enables monitoring and control of gate operators via internet-enabled smartphone, tablet or computer.
d.
Provides two-way communication between gate operator and MyQ accessories to enable remote open, close and monitoring of gate.
18.
Receiver:
a.
Security+ 2.0 3-channel on-board receiver, holds up to 50 remote controls (unlimited with use of 811LM/813LM), HomeLink compatible
b.
Transmits 310 MHz, 315 MHz, 390 MHz.
19.
Inherent Reversing Sensor: Detects obstructions or increased loads. Reverses gate when closing or stops/reverses the gate when opening.
20.
Electronic Limits: Maintains accurate limit position throughout travel, even after using the manual release handle.
21.
Dual-gate operation capabilities to allow 2 separate gate operators to operate in unison at a single entrance. Standard control box compatible with single or dual gates with no extra parts.
22.
Wireless Dual-Gate Operation:
a.
Built-in wireless communication will operate primary and secondary operator without having to run a communication wire.
b.
Support for Through-beam photo eye in the wireless dual-gate setup. Can attach emitter and receiver to each operator, eliminating the communication wire between them.
23.
Bi-Part Delay: Selectable feature for dual-gate applications. Firmware monitors speed and position of each gate and adjusts speed as necessary to ensure primary gate closes last, avoiding potential damage to the gate.
24.
Synchronized Close: Selectable feature for dual-gate applications with curved driveways. Monitors the speed and position of each gate and adjusts speed as necessary to ensure both the gates close at the same time. Only available if two control boxes are used.
25.
LED Diagnostic Display: Simplifies installation and troubleshooting.
26.
Colored Terminal Blocks: Provides easy identification of safety and fire department inputs.
27.
Alarm Reset Button: Instantly resets the built-in safety alarm siren.
28.
Fire Department Compliant: Selectable settings allow gate to auto open on power failure or battery depletion.
29.
Surge Suppression: Industrial strength on high and low voltage outputs. Protects against lightning strikes at a 50-foot (15240 mm) radius.
30.
Emergency Release: Simple-to-use keyed release handle allows gate to be operated manually and maintain limit position once re-engaged.
31.
Operating Temperature Range: -4 degrees F (-20 degrees C) to 140 degrees F (60 degrees C)
 
** NOTE TO SPECIFIER ** Unit comes with MyQ Enabled Technology built in. Pair it with MyQ Enabled accessories to maximize the capabilities of MyQ Enabled Technology. Delete optional accessories if not required.
 
32.
MyQ Enabled Accessories:
a.
LiftMaster 828LM Internet Gateway: Allows remote monitoring from internet-enabled computer or smartphone.
b.
LiftMaster 829LM Garage and Gate Monitor: Allows remote monitoring and operation.
c.
LiftMaster 823LM Remote Light Switch: Controls light remotely.
d.
LiftMaster 825LM Remote Light Control: Allows remote monitoring and operation.
 
** NOTE TO SPECIFIER ** Delete optional accessories if not required.
 
33.
Accessories: Safety Monitoring Devices:
a.
Monitored Photo Eyes and Wireless Edge Kits.
1)
LiftMaster LMRRU Reflective Photo Eyes.
2)
LiftMaster LMTBU Thru-Beam Photo Eyes.
3)
LiftMaster LMWEKITU Wireless Edge Kith with Transmitter and Receiver.
4)
LiftMaster LMWETXU Wireless Edge Transceiver
b.
Wired Monitored Edges (all require use of LMWEKITU)
1)
LiftMaster S50 Small Profile Monitored Edge
2)
LiftMaster L50 Large Profile Monitored Edge
3)
LiftMaster WS4 Wrap-Around 4 foot (1219 mm) square monitored edge
4)
LiftMaster WS5 Wrap-Around 5 foot (1524 mm) square monitored edge
5)
LiftMaster WS6 Wrap-Around 6 foot (1829 mm) square monitored edge
6)
LiftMaster WR4 Wrap-Around 4 foot (1219 mm) square monitored edge
7)
LiftMaster WR5 Wrap-Around 5 foot (1524 mm) square monitored edge
8)
LiftMaster WR6 Wrap-Around 6 foot (1829 mm) square monitored edge
34.
Accessories: Provide the optional accessories listed below.
a.
LiftMaster KPW5 Wireless Commercial Keypad
b.
LiftMaster KPW250 Wireless Commercial Keypad
c.
LiftMaster SP10W12V: 10W Solar Panel Kit
d.
LiftMaster MG1300 Maglock. 1,300 pound (590 kg) holding force
e.
LiftMaster 892LT 2-Button Security+ 2.0 Learning Remote Control
f.
LiftMaster 894LT 4-Button Security+ 2.0 Learning Remote Control
g.
LiftMaster 811LM 1-Button Encrypted DIP Remote Control
h.
LiftMaster 813LM 3-Button Encrypted DIP Remote Control
i.
LiftMaster EL1SS Stainless Steel Single/Multi-Tenant Telephone Entry System
j.
LiftMaster K1D8080-1CC Expansion Board
k.
LiftMaster LOOPDETLM Plug-in Loop Detector (requires expansion board)
 
** NOTE TO SPECIFIER ** Delete if not required.
 
C.
Gate Operators: LiftMaster LA412DC Solar Residential DC Linear Actuator.
 
** NOTE TO SPECIFIER ** To be UL 325 Compliant, two independent safety entrapment protection devices must be installed at each entrapment zone (the inherent reversing system in this gate operator counts as one device). Devices such as monitored photo eyes or edge sensors are required to be installed with this operator.
 
1.
LiftMaster LA412PKGU Single Actuator Arm Solar Package contains:
a.
LA412DC Single Actuator Arm
1)
Cast aluminum corrosion-resistant body, stainless steel piston.
b.
LA412CONTU Control Box for single or master/second application
c.
10 Watt Solar Panel Kit
2.
LiftMaster LA412DCS Second Actuator Arm with junction box and 40 foot (12.2 m) direct burial cable for primary/secondary applications.
3.
LiftMaster XLSOLARCONTU Alternate Control Box for single or master/second applications desiring more room for accessories or two 33 Ah batteries for solar applications.
4.
Compliance: UL Listed. Compliant to the UL 325, UL 991 and CSA C22.2 No. 247 standards.
a.
This model is intended for use in Class I, II, III and IV vehicular swing gate applications.
b.
To be UL 325 compliant, two independent safety entrapment protection devices must be installed at each entrapment zone (the inherent reversing system in this gate operator counts as one device). Devices such as monitored photo eyes or edge sensors are required to be installed with this operator.
c.
Only LiftMaster monitored photo eyes or edge sensors may be used with this operator to meet the UL 325 Standard.
5.
Monitored Safety Inputs: 3 inputs per board (main board and expansion board) totaling 6 inputs with any combination of up to:
a.
Main Board:
1)
1 Monitored Close Photo Eye input
2)
1 Monitored Open Photo Eye input
3)
1 Monitored Open Safety Edge or Open Photo Eye input
b.
8 Monitored edges available when Transceiver is added.
6.
Electrical Power Requirements: 115V AC, single phase.
7.
Motor: 12V DC, with soft start/stop operation.
8.
Capacity: 16-foot (4877 mm) gate at 550 pounds (249 kg).
9.
Recommended Cycles per Day: 50.
10.
Gate Travel Speed: 90-degree opening in less than 23 seconds.
11.
Warranty: 2 years.
12.
Wormgear Reduction: Precision machined metal gears contained in lubrication housing.
13.
Solar Power Management system draws 5.7 mA when gate is idle. Provides 1160 cycles with two 7 Ah batteries.
14.
Standby Time: Provides up to 126 days of standby power in the event of no sun or loss of AC power.
15.
Solar Capable: See daily solar cycle chart.
16.
Accessory Electrical Power Requirements: 24V DC 500 mA output, switched and unswitched power.
17.
Chassis: Commercial-duty die cast aluminum housing.
18.
Internet Connectivity: MyQ Technology
a.
902 to 928 MHz
b.
50-channel FHSS (Frequency Hopping Spread Spectrum).
c.
LiftMaster 828LM Internet Gateway enables monitoring and control of gate operators via internet-enabled smartphone, tablet or computer.
d.
Provides two-way communication between gate operator and MyQ accessories to enable remote open, close and monitoring of gate.
19.
Receiver:
a.
Security+ 2.0 3-channel on-board receiver, holds up to 50 remote controls (unlimited with use of 811LM/813LM), HomeLink compatible
b.
Transmits 310 MHz, 315 MHz, 390 MHz.
20.
Inherent Reversing Sensor: Detects obstructions or increased loads. Reverses gate when closing or stops/reverses the gate when opening.
21.
Electronic Limits: Maintains accurate limit position throughout travel, even after using the manual release handle.
22.
Dual-gate operation capabilities to allow 2 separate gate operators to operate in unison at a single entrance. Standard control box compatible with single or dual gates with no extra parts.
23.
Wireless Dual-Gate Operation:
a.
Built-in wireless communication will operate primary and secondary operator without having to run a communication wire.
b.
Support for Through-beam photo eye in the wireless dual-gate setup. Can attach emitter and receiver to each operator, eliminating the communication wire between them.
24.
Bi-Part Delay: Selectable feature for dual-gate applications. Firmware monitors speed and position of each gate and adjusts speed as necessary to ensure primary gate closes last, avoiding potential damage to the gate.
25.
Synchronized Close: Selectable feature for dual-gate applications with curved driveways. Monitors the speed and position of each gate and adjusts speed as necessary to ensure both the gates close at the same time. Only available if two control boxes are used.
26.
LED Diagnostic Display: Simplifies installation and troubleshooting.
27.
Colored Terminal Blocks: Provides easy identification of safety and fire department inputs.
28.
Alarm Reset Button: Instantly resets the built-in safety alarm siren.
29.
Fire Department Compliant: Selectable settings allow gate to auto open on power failure or battery depletion.
30.
Surge Suppression: Industrial strength on high and low voltage outputs. Protects against lightning strikes at a 50-foot (15240 mm) radius.
31.
Emergency Release: Simple-to-use keyed release handle allows gate to be operated manually and maintain limit position once re-engaged.
32.
Operating Temperature Range: -40 degrees F (-40 degrees C) to 140 degrees F (60 degrees C)
 
** NOTE TO SPECIFIER ** Unit comes with MyQ Enabled Technology built in. Pair it with MyQ Enabled accessories to maximize the capabilities of MyQ Enabled Technology. Delete optional accessories if not required.
 
33.
MyQ Enabled Accessories:
a.
LiftMaster 828LM Internet Gateway: Allows remote monitoring from Internet-enabled computer or smartphone.
b.
LiftMaster 829LM Garage and Gate Monitor: Allows remote monitoring and operation.
c.
LiftMaster 823LM Remote Light Switch: Controls light remotely.
d.
LiftMaster 825LM Remote Light Control: Allows remote monitoring and operation.
 
** NOTE TO SPECIFIER ** Delete optional accessories if not required.
 
34.
Accessories: Safety Monitoring Devices:
a.
Monitored Photo Eyes and Wireless Edge Kits.
1)
LiftMaster LMRRU Reflective Photo Eyes.
2)
LiftMaster LMTBU Thru-Beam Photo Eyes.
3)
LiftMaster LMWEKITU Wireless Edge Kith with Transmitter and Receiver.
4)
LiftMaster LMWETXU Wireless Edge Transceiver
b.
Wired Monitored Edges (all require use of LMWEKITU)
1)
LiftMaster S50 Small Profile Monitored Edge
2)
LiftMaster L50 Large Profile Monitored Edge
3)
LiftMaster WS4 Wrap-Around 4 foot (1219 mm) square monitored edge
4)
LiftMaster WS5 Wrap-Around 5 foot (1524 mm) square monitored edge
5)
LiftMaster WS6 Wrap-Around 6 foot (1829 mm) square monitored edge
6)
LiftMaster WR4 Wrap-Around 4 foot (1219 mm) square monitored edge
7)
LiftMaster WR5 Wrap-Around 5 foot (1524 mm) square monitored edge
8)
LiftMaster WR6 Wrap-Around 6 foot (1829 mm) square monitored edge
35.
Accessories: Provide the optional accessories listed below.
a.
LiftMaster KPW5 Wireless Commercial Keypad
b.
LiftMaster SGLOCK12V Solenoid Lock
c.
LiftMaster SOLPNL10W12V 10 Watt Solar Panel
d.
LiftMaster SOLPNL20W12V 20 Watt Solar Panel
e.
LiftMaster 892LT 2-Button Security+ 2.0 Learning Remote Control
f.
LiftMaster 894LT 4-Button Security+ 2.0 Learning Remote Control
g.
LiftMaster 811LM 1-Button Encrypted DIP Remote Control
h.
LiftMaster 813LM 3-Button Encrypted DIP Remote Control
i.
LiftMaster K1D8080-1CC Expansion Board
j.
LiftMaster LOOPDETLM Plug-in Loop Detector (requires Expansion Board)
 
** NOTE TO SPECIFIER ** Delete if not required.
 
D.
Gate Operators: LiftMaster CSW24U Commercial High Traffic DC Swing Gate Operator.
 
** NOTE TO SPECIFIER ** To be UL 325 Compliant, two independent safety entrapment protection devices must be installed at each entrapment zone (the inherent reversing system in this gate operator counts as one device). Devices such as monitored photo eyes or edge sensors are required to be installed with this operator.
 
1.
LiftMaster CSW24U Swing Gate Operator.
2.
Compliance: UL Listed. Compliant to the UL 325, UL 991 and CSA C22.2 No. 247 standards.
a.
This model is intended for use in Class I, II, III and IV vehicular swing gate applications.
b.
To be UL 325 compliant, two independent safety entrapment protection devices must be installed at each entrapment zone (the inherent reversing system in this gate operator counts as one device). Devices such as monitored photo eyes or edge sensors are required to be installed with this operator.
c.
Only LiftMaster monitored photo eyes or edge sensors may be used with this operator to meet the UL 325 Standard.
3.
Monitored Safety Inputs: 3 inputs per board (main board and expansion board) totaling 6 inputs with any combination of up to:
a.
Main Board:
1)
1 Monitored Close Photo Eye input
2)
1 Monitored Open Photo Eye input
3)
1 Monitored Open Safety Edge or Open Photo Eye input
b.
Expansion Board
1)
2 Monitored Safety Edge or Photo Eye inputs (selectable for Open or Close).
2)
1 Monitored Photo Eye input (selectable for Open or Close).
c.
8 Monitored edges available when Transceiver is added.
4.
Electrical Power Requirements:
 
** NOTE TO SPECIFIER ** Delete power option not required.
 
a.
115V AC, single phase
b.
230V AC, single phase.
5.
Motor: 24V DC, with soft start/stop operation.
a.
Duty cycle: Continuous duty.
6.
Capacity: 12 foot (3658 mm) gate at 1,200 pounds (554 kg) or 18-foot (5486 mm) gate at 600 pounds (272 kg).
7.
Recommended Cycles per Day: Continuous duty.
8.
Gate Travel Speed: 90-degree opening in 13 to 15 seconds.
9.
Warranty: 5 years for commercial applications, 7 years for single-home applications.
10.
Wormgear Reduction: 2 commercial oil bath gearboxes with 900:1 wormgear reduction running in synthetic oil bath. Hardened output shafts designed for high cycle applications with frequent loop reversals.
11.
Battery Backup: Power Management system draws 14.8 mA when gate is idle with remote controls programmed. Provides 146 cycles on Battery Backup with two 7 Ah batteries or 876 cycles with two 33 Ah batteries.
12.
Standby Time: Provides up to 24 days of standby power in the event of a power loss with two 7 Ah batteries or 105 days with two 33 Ah batteries (excluding accessories).
13.
Solar Capable: See daily solar cycle chart.
14.
Accessory Electrical Power Requirements: 24V DC 500 mA output, switched and unswitched power.
15.
Chassis: Constructed with 1/4 inch (6mm) gold zinc-plated steel for rust prevention.
16.
Cover: High-density, UV-resistant polycarbonate two-piece cover.
17.
Internet Connectivity: MyQ Technology
a.
902 to 928 MHz
b.
50-channel FHSS (Frequency Hopping Spread Spectrum).
c.
LiftMaster 828LM Internet Gateway enables monitoring and control of gate operators via internet-enabled smartphone, tablet or computer.
d.
Provides two-way communication between gate operator and MyQ accessories to enable remote open, close and monitoring of gate.
18.
Receiver:
a.
Security+ 2.0 3-channel on-board receiver, holds up to 50 remote controls (unlimited with use of 811LM/813LM), HomeLink compatible
b.
Transmits 310 MHz, 315 MHz, 390 MHz.
19.
Inherent Reversing Sensor: Detects obstructions or increased loads. Reverses gate when closing or stops/reverses the gate when opening.
20.
Electronic Limits: Maintains accurate limit position throughout travel, even after using the manual release handle.
21.
Dual-gate operation capabilities to allow 2 separate gate operators to operate in unison at a single entrance.
22.
Wireless Dual-Gate Operation:
a.
Built-in wireless communication will operate primary and secondary operator without having to run a communication wire.
b.
Support for Through-beam photo eye in the wireless dual-gate setup. Can attach emitter and receiver to each operator, eliminating the communication wire between them.
23.
Soft Stop & Start during mid-travel reversal extends operator life under high-cycle, heavy gate use.
24.
Bi-Part Delay: Selectable feature for dual-gate applications. Firmware monitors speed and position of each gate and adjusts speed as necessary to ensure primary gate closes last, avoiding potential damage to the gate.
25.
Synchronized Close: Selectable feature for dual-gate applications with curved driveways. Monitors the speed and position of each gate and adjusts speed as necessary to ensure both the gates close at the same time.
26.
LED Diagnostic Display: Simplifies installation and troubleshooting.
27.
Colored Terminal Blocks: Provides easy identification of safety and fire department inputs.
28.
Programmable Auxiliary Relays: 2 programmable relays with 6 settings each
a.
Pre-warning or gate-in-motion sounder.
b.
Switch on/off devices at open or Close Limits or while gate is in motion..
c.
Tamper detection if gate is pushed off Close Limit.
d.
Cycle quantity feedback.
e.
Red/Green light to control gate traffic.
29.
Quick Close, Anti-Tailgate: Quickly secures property, preventing unauthorized access.
30.
Sequenced Access Management: Capable of sequentially controlling the operator in tandem with barrier gate.
31.
Plug-in Loop Detector Inputs: Programmed inputs for shadow, interrupt and exit.
32.
Alarm Reset Button: Instantly resets the built-in safety alarm siren.
33.
Fire Department Compliant: Selectable settings allow gate to auto open on power failure or battery depletion.
34.
Surge Suppression: Industrial strength on high and low voltage outputs. Protects against lightning strikes at a 50-foot (15240 mm) radius.
35.
Emergency Release: Simple-to-use release handle allows gate to be operated manually and maintain limit position once re-engaged.
36.
Operating Temperature Range:
a.
Without Heater: -4 degrees F (-20 degrees C) to 140 degrees F (60 degrees C)
b.
With Optional Heater: -40 degrees F (-40 degrees C) to 140 degrees F (60 degrees C)
 
** NOTE TO SPECIFIER ** Unit comes with MyQ Enabled Technology built in. Pair it with MyQ Enabled accessories to maximize the capabilities of MyQ Enabled Technology. Delete optional accessories if not required.
 
37.
MyQ Enabled Accessories:
a.
LiftMaster 828LM Internet Gateway: Allows remote monitoring from Internet-enabled computer or smartphone.
b.
LiftMaster 829LM Garage and Gate Monitor: Allows remote monitoring and operation.
c.
LiftMaster 823LM Remote Light Switch: Controls light remotely.
d.
LiftMaster 825LM Remote Light Control: Allows remote monitoring and operation.
 
** NOTE TO SPECIFIER ** Delete optional accessories if not required.
 
38.
Accessories: Safety Monitoring Devices:
a.
Monitored Photo Eyes and Wireless Edge Kits.
1)
LiftMaster LMRRU Reflective Photo Eyes.
2)
LiftMaster LMTBU Thru-Beam Photo Eyes.
3)
LiftMaster LMWEKITU Wireless Edge Kith with Transmitter and Receiver.
4)
LiftMaster LMWETXU Wireless Edge Transceiver
b.
Wired Monitored Edges (all require use of LMWEKITU)
1)
LiftMaster S50 Small Profile Monitored Edge
2)
LiftMaster L50 Large Profile Monitored Edge
3)
LiftMaster WS4 Wrap-Around 4 foot (1219 mm) square monitored edge
4)
LiftMaster WS5 Wrap-Around 5 foot (1524 mm) square monitored edge
5)
LiftMaster WS6 Wrap-Around 6 foot (1829 mm) square monitored edge
6)
LiftMaster WR4 Wrap-Around 4 foot (1219 mm) square monitored edge
7)
LiftMaster WR5 Wrap-Around 5 foot (1524 mm) square monitored edge
8)
LiftMaster WR6 Wrap-Around 6 foot (1829 mm) square monitored edge
39.
Accessories: Provide the optional accessories listed below.
a.
LiftMaster LOOPDETLM Plug-in Loop Detector
b.
LiftMaster KPW250 - Wireless Commercial Keypad
c.
LiftMaster 892LT 2-Button Security+ 2.0 Learning Remote Control
d.
LiftMaster 894LT 4-Button Security+ 2.0 Learning Remote Control
e.
LiftMaster 811LM 1-Button Encrypted DIP Remote Control
f.
LiftMaster 813LM 3-Button Encrypted DIP Remote Control
g.
LiftMaster IPAC - Internet Protocol Access Control Entry System
h.
LiftMaster EL2000SS Stainless Steel Commercial and Gated Community Telephone Entry System.
i.
LiftMaster Star1000 Commercial Access Control Receiver
j.
LiftMaster PPWR Passport Receiver with Security+ 2.0 Technology
k.
LiftMaster PPV1 Passport 1-Button Remote
l.
LiftMaster PPK1 Passport 1-Button Mini Remote
m.
LiftMaster KPR2000 Single Access Remote Control Keypad and Proximity Reader
n.
LiftMaster MG1300 Maglock. 1,300 pound (590 kg) holding force
o.
LiftMaster MPEL: Mounting plate for post mount
p.
LiftMaster HTR Heater Kit
 
** NOTE TO SPECIFIER ** Delete if not required.
 
E.
Gate Operators: LiftMaster RSW12U Residential/Light Commercial DC Swing Gate Operator.
 
** NOTE TO SPECIFIER ** To be UL 325 Compliant, two independent safety entrapment protection devices must be installed at each entrapment zone (the inherent reversing system in this gate operator counts as one device). Devices such as monitored photo eyes or edge sensors are required to be installed with this operator.
 
1.
LiftMaster RSW12U Swing Gate Operator.
2.
Compliance: UL Listed. Compliant to the UL 325, UL 991 and CSA C22.2 No. 247 standards.
a.
This model is intended for use in Class I, II, III and IV vehicular swing gate applications.
b.
To be UL 325 compliant, two independent safety entrapment protection devices must be installed at each entrapment zone (the inherent reversing system in this gate operator counts as one device). Devices such as monitored photo eyes or edge sensors are required to be installed with this operator.
c.
Only LiftMaster monitored photo eyes or edge sensors may be used with this operator to meet the UL 325 Standard.
3.
Monitored Safety Inputs: 3 inputs per board (main board and expansion board) totaling 6 inputs with any combination of up to:
a.
Main Board:
1)
1 Monitored Close Photo Eye input
2)
1 Monitored Open Photo Eye input
3)
1 Monitored Open Safety Edge or Open Photo Eye input
b.
8 Monitored edges available when Transceiver is added.
4.
Electrical Power Requirements: 115 V AC, single phase.
5.
Motor: 12V DC, with soft start/stop operation.
6.
Capacity: 12 foot (3658 mm) gate at 600 pounds (272 kg) or 16-foot (4900 mm) gate at 400 pounds (181 kg).
7.
Recommended Cycles per Day: 250.
8.
Gate Travel Speed: 90-degree opening in 15 to 17 seconds.
9.
Warranty: 3 years.
10.
Wormgear Reduction: 2 commercial oil bath gearboxes with 30:1 wormgear reduction running in synthetic oil bath.
11.
Battery Backup: Power Management system draws 5.7 mA when gate is idle with remote controls programmed. Provides 354 cycles on Battery Backup with two 7 Ah batteries.
12.
Standby Time: Provides up to 126 days of standby power in the event of a power loss (excluding accessories).
13.
Solar Capable: See daily solar cycle chart.
14.
Accessory Electrical Power Requirements: 24V DC 500 mA output, switched and unswitched power.
15.
Chassis: Constructed with 1/4 inch (6mm) gold zinc-plated steel for rust prevention.
16.
Cover: High-density, UV-resistant polycarbonate two-piece cover.
17.
Internet Connectivity: MyQ Technology
a.
902 to 928 MHz
b.
50-channel FHSS (Frequency Hopping Spread Spectrum).
c.
LiftMaster 828LM Internet Gateway enables monitoring and control of gate operators via internet-enabled smartphone, tablet or computer.
d.
Provides two-way communication between gate operator and MyQ accessories to enable remote open, close and monitoring of gate.
18.
Receiver:
a.
Security+ 2.0 3-channel on-board receiver, holds up to 50 remote controls (unlimited with use of 811LM/813LM), HomeLink compatible
b.
Transmits 310 MHz, 315 MHz, 390 MHz.
19.
Inherent Reversing Sensor: Detects obstructions or increased loads. Reverses gate when closing or stops/reverses the gate when opening.
20.
Electronic Limits: Maintains accurate limit position throughout travel, even after using the manual release handle.
21.
Dual-gate operation capabilities to allow 2 separate gate operators to operate in unison at a single entrance.
22.
Wireless Dual-Gate Operation:
a.
Built-in wireless communication will operate primary and secondary operator without having to run a communication wire.
b.
Support for Through-beam photo eye in the wireless dual-gate setup. Can attach emitter and receiver to each operator, eliminating the communication wire between them.
23.
Soft Stop & Start during mid-travel reversal extends operator life under high-cycle, heavy gate use.
24.
Bi-Part Delay: Selectable feature for dual-gate applications. Firmware monitors speed and position of each gate and adjusts speed as necessary to ensure primary gate closes last, avoiding potential damage to the gate.
25.
Synchronized Close: Selectable feature for dual-gate applications with curved driveways. Monitors the speed and position of each gate and adjusts speed as necessary to ensure both the gates close at the same time.
26.
LED Diagnostic Display: Simplifies installation and troubleshooting.
27.
Colored Terminal Blocks: Provides easy identification of safety and fire department inputs.
28.
Alarm Reset Button: Instantly resets the built-in safety alarm siren.
29.
Fire Department Compliant: Selectable settings allow gate to auto open on power failure or battery depletion.
30.
Surge Suppression: Industrial strength on high and low voltage outputs. Protects against lightning strikes at a 50-foot (15240 mm) radius.
31.
Emergency Release: Simple-to-use keyed release handle allows gate to be operated manually and maintain limit position once re-engaged.
32.
Operating Temperature Range:
a.
Without Heater: -4 degrees F (-20 degrees C) to 140 degrees F (60 degrees C)
b.
With Optional Heater: -40 degrees F (-40 degrees C) to 140 degrees F (60 degrees C)
 
** NOTE TO SPECIFIER ** Unit comes with MyQ Enabled Technology built in. Pair it with MyQ Enabled accessories to maximize the capabilities of MyQ Enabled Technology. Delete optional accessories if not required.
 
33.
MyQ enabled Accessories:
a.
LiftMaster 828LM Internet Gateway: Allows remote monitoring from internet-enabled computer or smartphone.
b.
LiftMaster 829LM Garage and Gate Monitor: Allows remote monitoring and operation.
c.
LiftMaster 823LM Remote Light Switch: Controls light remotely.
d.
LiftMaster 825LM Remote Light Control: Allows remote monitoring and operation.
 
** NOTE TO SPECIFIER ** Delete optional accessories if not required.
 
34.
Accessories: Safety Monitoring Devices:
a.
Monitored Photo Eyes and Wireless Edge Kits.
1)
LiftMaster LMRRU Reflective Photo Eyes.
2)
LiftMaster LMTBU Thru-Beam Photo Eyes.
3)
LiftMaster LMWEKITU Wireless Edge Kith with Transmitter and Receiver.
4)
LiftMaster LMWETXU Wireless Edge Transceiver
b.
Wired Monitored Edges (all require use of LMWEKITU)
1)
LiftMaster S50 Small Profile Monitored Edge
2)
LiftMaster L50 Large Profile Monitored Edge
3)
LiftMaster WS4 Wrap-Around 4 foot (1219 mm) square monitored edge
4)
LiftMaster WS5 Wrap-Around 5 foot (1524 mm) square monitored edge
5)
LiftMaster WS6 Wrap-Around 6 foot (1829 mm) square monitored edge
6)
LiftMaster WR4 Wrap-Around 4 foot (1219 mm) square monitored edge
7)
LiftMaster WR5 Wrap-Around 5 foot (1524 mm) square monitored edge
8)
LiftMaster WR6 Wrap-Around 6 foot (1829 mm) square monitored edge
35.
Accessories: Provide the optional accessories listed below.
a.
LiftMaster KPW5 Wireless Commercial Keypad
b.
LiftMaster KPW250 Wireless Commercial Keypad
c.
LiftMaster SP10W12V: 10W Solar Panel Kit
d.
LiftMaster MG1300 Maglock. 1,300 pound (590 kg) holding force
e.
LiftMaster 892LT 2-Button Security+ 2.0 Learning Remote Control
f.
LiftMaster 894LT 4-Button Security+ 2.0 Learning Remote Control
g.
LiftMaster 811LM 1-button Encrypted DIP Remote Control
h.
LiftMaster 813LM 3-Button Encrypted DIP Remote Control
i.
LiftMaster EL1SS Stainless Steel Single/Multi-Tenant Telephone Entry System
j.
LiftMaster K1D8080-1CC Expansion Board
k.
LiftMaster LOOPDETLM Plug-in Loop Detector (requires expansion board)
l.
LiftMaster HTR Heater Kit
 
** NOTE TO SPECIFIER ** Delete if not required.
 
F.
Gate Operators: LiftMaster CSW200 Series Commercial Swing Gate Operators.
 
** NOTE TO SPECIFIER ** Delete models not required.
 
1.
LiftMaster CSW200501U Commercial Swing Gate Operator for high-traffic applications.
a.
Description: High Cycle High Temperature 1/2 HP continuous duty motor with class H High Temperature Insulation
b.
Capacity: 8-foot (2438 mm) gate at 1,600 pounds (726 kg) or 18-foot (5486 mm) gate at 600 pounds (272kg)
c.
Recommended Cycles per Hour: Continuous
2.
LiftMaster CSW200101U Commercial Swing Gate Operator with 1 HP capacity for heavy-duty applications.
a.
Description: Two High Cycle High Temperature 1/2 HP continuous duty motors with class H High Temperature Insulation, designed for large, heavy wrought-iron gates.
b.
250 pounds (113.4 kg) of pulling torque
c.
Capacity: 12 foot (3658 mm) gate at 2,000 pounds (907 kg) or 22-foot (6706 mm) gate at 1,000 pounds (454 kg).
d.
Recommended Cycles per Hour: Continuous duty.
3.
Warranty: 5 years for commercial applications, 7 years for residential applications.
 
** NOTE TO SPECIFIER ** To be UL 325 Compliant, two independent safety entrapment protection devices must be installed at each entrapment zone (the inherent reversing system in this gate operator counts as one device). Devices such as monitored photo eyes or edge sensors are required to be installed with this operator.
 
4.
Compliance: UL Listed. Compliant to the UL 325, UL 991 and CSA C22.2 No. 247 standards.
a.
This model is intended for use in Class I, II, III and IV vehicular swing gate applications.
b.
To be UL 325 compliant, two independent safety entrapment protection devices must be installed at each entrapment zone (the inherent reversing system in this gate operator counts as one device). Devices such as monitored photo eyes or edge sensors are required to be installed with this operator.
c.
Only LiftMaster monitored photo eyes or edge sensors may be used with this operator to meet the UL 325 Standard.
5.
Monitored Safety Inputs: 3 inputs per board (main board and expansion board) totaling 6 inputs with any combination of up to:
a.
Main Board:
1)
1 Monitored Close Photo Eye input
2)
1 Monitored Open Photo Eye input
3)
1 Monitored Open Safety Edge or Open Photo Eye input
b.
Expansion Board
1)
2 Monitored Safety Edge or Photo Eye inputs (selectable for Open or Close).
2)
1 Monitored Photo Eye input (selectable for Open or Close).
c.
8 Monitored edges available when Transceiver is added.
6.
Electrical Power Requirements: 115V, single phase.
a.
Accessory Electrical Power Requirements: 24V DC 500 mA output, switched or unswitched power.
7.
Wormgear Reduction: 2 Commercial oil bath gearboxes, 900:1 wormgear reduction. Hardened output shafts designed for high cycle applications with frequent loop reversals.
8.
Gate Traveling Speed: 90-degree opening in 13-15 seconds.
9.
Chassis: Constructed with 1/4-inch (6 mm) sanded, welded and gold zinc-plated sheet metal.
10.
Finishing: Metal parts are gold zinc-plated for rustproof protection.
11.
Cover: High-density UV-resistant polyethylene material.
12.
Internet Connectivity: MyQ Technology.
a.
902 to 928 MHz
b.
50-channel FHSS (Frequency Hopping Spread Spectrum).
c.
LiftMaster 828LM Internet Gateway enables monitoring and control of gate operators via internet-enabled smartphone, tablet or computer
d.
Provides two-way communication between gate operator and MyQ accessories to enable remote open, close and monitoring of gate.
13.
Receiver:
a.
Security+ 2.0 3-channel on-board radio receiver, holds up to 50 remote controls (unlimited with use of 811LM/813LM), HomeLink compatible
b.
Transmits 310 MHz, 315MHz, 390 MHz
14.
Inherent Reversing Sensor: Detects obstructions or increased loads. Reverses gate when closing or stops/reverses the gate when opening.
15.
Soft Stop extends operator life under high-cycle, heavy gate use.
16.
Emergency Release: Release handles allows gate to be operated manually and maintain limit position once re-engaged.
17.
Wireless Dual-Gate Operation:
a.
Built-in wireless communication will operate primary and secondary operator without having to run a communication wire.
b.
Support for through-beam photo eye in the wireless dual-gate setup. Can attach emitter and receiver to each operator, eliminating the communication wire between them.
18.
Bi-Part Delay: Selectable feature for dual-gate applications. Dial provides manual adjustment to control delay as necessary to ensure primary gate closes last, avoiding potential damage to the gate.
19.
LED Diagnostic Display: Simplifies installation and troubleshooting.
20.
Colored Terminal Blocks: Provides easy identification of safety and fire department inputs.
21.
Programmable Auxiliary Relays: 2 programmable relays with 6 settings each.
a.
Pre-warning or gate-in motion sounder
b.
Switch on/off devices at open or Close Limits or while gate is in motion.
c.
Tamper detection if gate is pushed off Close Limit
d.
Cycle quantity feedback.
e.
Red/Green Light to control gate traffic.
22.
Quick Close, Anti-Tailgate: Quickly secures property, preventing unauthorized access.
23.
Sequenced Access Management: Capable of sequentially controlling the operator in tandem with a barrier gate.
24.
Surge/Lightning Protection: Industrial surge protection on high and low voltage inputs. Protects against lightning strikes at a 50-foot (15.2 m) radius.
25.
Plug-in loop detector inputs: Programmed inputs for shadow, interrupt and exit.
26.
External Alarm Reset Button: Allows for quick reset of the gate operator when the alarm has been activated.
27.
Warning Device: UL 325 compliant entrapment warning alarm has ability to be set for pre-operation warning; provides 3-second warning prior to and during gate movement.
28.
Mechanical Limit System: Maintains accurate gate position throughout gate travel, even after using manual disconnect.
29.
Operating Temperature Range:
a.
Without heater: -4 degrees F (-20 degrees C) to 140 degrees F (60 degrees C).
b.
With optional heater: -40 degrees F (-40 degrees C) to 140 degrees F(60 degrees C).
30.
MyQ Enabled Accessories:
a.
LiftMaster 828LM Internet Gateway: Allows remote monitoring from internet-enabled computer, tablet or smartphone.
b.
LiftMaster 829LM Garage and Gate Monitor: Allows remote monitoring and operation.
c.
LiftMaster 823LM Remote Light Switch: Controls light remotely
d.
LiftMaster 825LM Remote Light Control: Allows remote monitoring and operation.
31.
Accessories: Safety Monitoring Devices:
a.
Monitored Photo Eyes and Wireless Edge Kits.
1)
LiftMaster LMRRU Reflective Photo Eyes.
2)
LiftMaster LMTBU Thru-Beam Photo Eyes.
3)
LiftMaster LMWEKITU Wireless Edge Kith with Transmitter and Receiver.
4)
LiftMaster LMWETXU Wireless Edge Transceiver
b.
Wired Monitored Edges (all require use of LMWEKITU)
1)
LiftMaster S50 Small Profile Monitored Edge
2)
LiftMaster L50 Large Profile Monitored Edge
3)
LiftMaster WS4 Wrap-Around 4 foot (1219 mm) square monitored edge
4)
LiftMaster WS5 Wrap-Around 5 foot (1524 mm) square monitored edge
5)
LiftMaster WS6 Wrap-Around 6 foot (1829 mm) square monitored edge
6)
LiftMaster WR4 Wrap-Around 4 foot (1219 mm) square monitored edge
7)
LiftMaster WR5 Wrap-Around 5 foot (1524 mm) square monitored edge
8)
LiftMaster WR6 Wrap-Around 6 foot (1829 mm) square monitored edge
32.
Accessories: Provide the optional accessories listed below.
a.
LiftMaster LOOPDETLM Plug-in Loop Detector
b.
LiftMaster KPW250 - Wireless Commercial Keypad
c.
LiftMaster 892LT 2-Button Security+ 2.0 Learning Remote Control
d.
LiftMaster 894LT 4-Button Security+ 2.0 Learning Remote Control
e.
LiftMaster 811LM 1-Button Encrypted DIP Remote Control
f.
LiftMaster 813LM 3-Button Encrypted DIP Remote Control
g.
LiftMaster IPAC - Internet Protocol Access Control Entry System
h.
LiftMaster EL2000SS Stainless Steel Commercial and Gated Community Telephone Entry System.
i.
LiftMaster Star1000 Commercial Access Control Receiver
j.
LiftMaster PPWR Passport Receiver with Security+ 2.0 Technology
k.
LiftMaster PPV1 Passport 1-Button Remote
l.
LiftMaster PPK1 Passport 1-Button Mini Remote
m.
LiftMaster KPR2000 Single Access Remote Control Keypad and Proximity Reader
n.
LiftMaster HTRNB Heater Kit
o.
LiftMaster Advanced Traffic Management Quick-Close Option
 
** NOTE TO SPECIFIER ** Delete if not required.
 
G.
Gate Operators: LiftMaster CSL24U Commercial High Traffic DC Slide Gate Operator.
 
** NOTE TO SPECIFIER ** To be UL 325 Compliant, two independent safety entrapment protection devices must be installed at each entrapment zone (the inherent reversing system in this gate operator counts as one device). Devices such as monitored photo eyes or edge sensors are required to be installed with this operator.
 
1.
LiftMaster CSL24U Slide Gate Operator.
2.
Compliance: UL Listed. Compliant to the UL 325, UL 991 and CSA C22.2 No. 247 standards.
a.
This model is intended for use in Class I, II, III and IV vehicular slide gate applications.
b.
To be UL 325 compliant, two independent safety entrapment protection devices must be installed at each entrapment zone (the inherent reversing system in this gate operator counts as one device). Devices such as monitored photo eyes or edge sensors are required to be installed with this operator.
c.
Only LiftMaster monitored photo eyes or edge sensors may be used with this operator to meet the UL 325 Standard.
3.
Monitored Safety Inputs: 3 inputs per board (main board and expansion board) totaling 6 inputs with any combination of up to:
a.
Main Board:
1)
1 Monitored Close Photo Eye input
2)
1 Monitored Open Photo Eye input
3)
1 Monitored Open Safety Edge or Open Photo Eye input
b.
Expansion Board
1)
2 Monitored Safety Edge or Photo Eye inputs (selectable for Open or Close).
2)
1 Monitored Photo Eye input (selectable for Open or Close).
c.
8 Monitored edges available when Transceiver is added.
4.
Electrical Power Requirements:
 
** NOTE TO SPECIFIER ** Delete power option not required.
 
a.
115V AC, single phase
b.
230V AC, single phase.
5.
Motor: 24V DC, with soft start/stop operation.
a.
Duty cycle: Continuous duty.
6.
Capacity: 50-foot (15200 mm) gate at 1,500 pounds (680 kg).
7.
Recommended Cycles per Day: Continuous duty.
8.
Gate Travel Speed: 12 inches (304 mm) per second.
9.
Warranty: 5 years for commercial applications, 7 years for single-home applications.
10.
Wormgear Reduction: Commercial oil bath gearbox with 10:1 wormgear reduction running in synthetic oil bath.
11.
Battery Backup: Power Management system draws 14.8 mA when gate is idle with remote controls programmed. Provides 208 cycles on Battery Backup with two 7 Ah batteries or 1179 cycles with two 33 Ah batteries.
12.
Standby Time: Provides up to 24 days of standby power in the event of a power loss with two 7 Ah batteries or 105 days with two 33 Ah batteries (excluding accessories).
13.
Solar Capable: See daily solar cycle chart.
14.
Accessory Electrical Power Requirements: 24V DC 500 mA output, switched and unswitched power.
15.
Chassis: Constructed with 1/4 inch (6mm) gold zinc-plated steel for rust prevention.
16.
Cover: High-density, UV-resistant polycarbonate two-piece cover.
17.
Internet Connectivity: MyQ Technology
a.
902 to 928 MHz
b.
50-channel FHSS (Frequency Hopping Spread Spectrum).
c.
LiftMaster 828LM Internet Gateway enables monitoring and control of gate operators via internet-enabled smartphone, tablet or computer.
d.
Provides two-way communication between gate operator and MyQ accessories to enable remote open, close and monitoring of gate.
18.
Receiver:
a.
Security+ 2.0 3-channel on-board receiver, holds up to 50 remote controls (unlimited with use of 811LM/813LM), HomeLink compatible
b.
Transmits 310 MHz, 315 MHz, 390 MHz.
19.
Inherent Reversing Sensor: Detects obstructions or increased loads. Reverses gate when closing or stops/reverses the gate when opening.
20.
Electronic Limits: Maintains accurate limit position throughout travel, even after using the manual disconnect.
21.
Dual-gate operation capabilities to allow 2 separate gate operators to operate in unison at a single entrance.
22.
Wireless Dual-Gate Operation:
a.
Built-in wireless communication will operate primary and secondary operator without having to run a communication wire.
b.
Support for Through-beam photo eye in the wireless dual-gate setup. Can attach emitter and receiver to each operator, eliminating the communication wire between them.
23.
PosiLock: Automatically powers the operator and returns a gate to the closed position when gate is pushed off of its closed limits.
24.
Bi-Part Delay: Selectable feature for dual-gate applications. Firmware monitors speed and position of each gate and adjusts speed as necessary to ensure both the gates close at the same time.
25.
Synchronized Close: Selectable feature for dual-gate applications. Monitors the speed and position of each gate and adjusts speed as necessary to ensure both the gates close at the same time.
26.
LED Diagnostic Display: Simplifies installation and troubleshooting.
27.
Colored Terminal Blocks: Provides easy identification of safety and fire department inputs.
28.
Programmable Auxiliary Relays: 2 programmable relays with 6 settings each
a.
Pre-warning or gate-in-motion sounder.
b.
Switch on/off devices at open or Close Limits or while gate is in motion..
c.
Tamper detection if gate is pushed off Close Limit.
d.
Cycle quantity feedback.
e.
Red/Green light to control gate traffic.
29.
Quick Close, Anti-Tailgate: Quickly secures property, preventing unauthorized access.
30.
Sequenced Access Management: Capable of sequentially controlling the operator in tandem with barrier gate.
31.
Plug-in Loop Detector Inputs: Programmed inputs for shadow, interrupt and exit.
32.
Alarm Reset Button: Instantly resets the built-in safety alarm siren.
33.
Fire Department Compliant: Selectable settings allow gate to auto open on power failure or battery depletion.
34.
Surge Suppression: Industrial strength on high and low voltage outputs. Protects against lightning strikes at a 50-foot (15240 mm) radius.
35.
Keyed Manual Disconnect: Simple-to-use disconnect allows gate to be operated manually and maintain limit position once re-engaged.
36.
Operating Temperature Range:
a.
Without Heater: -4 degrees F (-20 degrees C) to 140 degrees F (60 degrees C)
b.
With Optional Heater: -40 degrees F (-40 degrees C) to 140 degrees F (60 degrees C)
 
** NOTE TO SPECIFIER ** Unit comes with MyQ Enabled Technology built in. Pair it with MyQ Enabled accessories to maximize the capabilities of MyQ Enabled Technology. Delete optional accessories if not required.
 
37.
MyQ enabled Accessories:
a.
LiftMaster 828LM Internet Gateway: Allows remote monitoring from internet-enabled computer or smartphone.
b.
LiftMaster 829LM Garage and Gate Monitor: Allows remote monitoring and operation.
c.
LiftMaster 823LM Remote Light Switch: Controls light remotely.
d.
LiftMaster 825LM Remote Light Control: Allows remote monitoring and operation.
38.
Accessories: Safety Monitoring Devices:
a.
Monitored Photo Eyes and Wireless Edge Kits.
1)
LiftMaster LMRRU Reflective Photo Eyes.
2)
LiftMaster LMTBU Thru-Beam Photo Eyes.
3)
LiftMaster LMWEKITU Wireless Edge Kith with Transmitter and Receiver.
4)
LiftMaster LMWETXU Wireless Edge Transceiver
b.
Wired Monitored Edges (all require use of LMWEKITU)
1)
LiftMaster S50 Small Profile Monitored Edge
2)
LiftMaster L50 Large Profile Monitored Edge
3)
LiftMaster WS4 Wrap-Around 4 foot (1219 mm) square monitored edge
4)
LiftMaster WS5 Wrap-Around 5 foot (1524 mm) square monitored edge
5)
LiftMaster WS6 Wrap-Around 6 foot (1829 mm) square monitored edge
6)
LiftMaster WR4 Wrap-Around 4 foot (1219 mm) square monitored edge
7)
LiftMaster WR5 Wrap-Around 5 foot (1524 mm) square monitored edge
8)
LiftMaster WR6 Wrap-Around 6 foot (1829 mm) square monitored edge
39.
Accessories: Provide the optional accessories listed below.
a.
LiftMaster LOOPDETLM Plug-in Loop Detector
b.
LiftMaster KPW250 - Wireless Commercial Keypad
c.
LiftMaster 892LT 2-Button Security+ 2.0 Learning Remote Control
d.
LiftMaster 894LT 4-Button Security+ 2.0 Learning Remote Control
e.
LiftMaster 811LM 1-Button Encrypted DIP Remote Control
f.
LiftMaster 813LM 3-Button Encrypted DIP Remote Control
g.
LiftMaster IPAC - Internet Protocol Access Control Entry System
h.
LiftMaster EL2000SS Stainless Steel Commercial and Gated Community Telephone Entry System.
i.
LiftMaster Star1000 Commercial Access Control Receiver
j.
LiftMaster PPWR Passport Receiver with Security+ 2.0 Technology
k.
LiftMaster PPV1 Passport 1-Button Remote
l.
LiftMaster PPK1 Passport 1-Button Mini Remote
m.
LiftMaster KPR2000 Single Access Remote Control Keypad and Proximity Reader
n.
LiftMaster MG1300 Maglock. 1,300 pound (590 kg) holding force
o.
LiftMaster MPEL: Mounting plate for post mount
p.
LiftMaster HTR Heater Kit
 
** NOTE TO SPECIFIER ** Delete if not required.
 
H.
Gate Operators: LiftMaster RSL12U Residential/Light Commercial DC Slide Gate Operator.
 
** NOTE TO SPECIFIER ** To be UL 325 Compliant, two independent safety entrapment protection devices must be installed at each entrapment zone (the inherent reversing system in this gate operator counts as one device). Devices such as monitored photo eyes or edge sensors are required to be installed with this operator.
 
1.
LiftMaster RSL12U Slide Gate Operator.
2.
Compliance: UL Listed. Compliant to the UL 325, UL 991 and CSA C22.2 No. 247 standards.
a.
This model is intended for use in Class I, II, III and IV vehicular slide gate applications.
b.
To be UL 325 compliant, two independent safety entrapment protection devices must be installed at each entrapment zone (the inherent reversing system in this gate operator counts as one device). Devices such as monitored photo eyes or edge sensors are required to be installed with this operator.
c.
Only LiftMaster monitored photo eyes or edge sensors may be used with this operator to meet the UL 325 Standard.
3.
Monitored Safety Inputs: 3 inputs per board (main board and expansion board) totaling 6 inputs with any combination of up to:
a.
Main Board:
1)
1 Monitored Close Photo Eye input
2)
1 Monitored Open Photo Eye input
3)
1 Monitored Open Safety Edge or Open Photo Eye input
b.
8 Monitored edges available when Transceiver is added.
4.
Electrical Power Requirements: 115V AC, single phase
5.
Motor: 12V DC, with soft start/stop operation.
6.
Capacity: 25 foot (7600 mm) gate at 800 pounds (363 kg).
7.
Recommended Cycles per Day: 120.
8.
Gate Travel Speed: 10 inches (254 mm) per second.
9.
Warranty: 3 years.
10.
Wormgear Reduction: 15:1 wormgear reduction running in synthetic oil bath.
11.
Battery Backup: Power Management system draws 5.7 mA when gate is idle with remote controls programmed. Provides 281 cycles on Battery Backup with two 7 Ah batteries.
12.
Standby Time: Provides up to 126 days of standby power in the event of a power loss (excluding accessories).
13.
Solar Capable: See daily solar cycle chart.
14.
Accessory Electrical Power Requirements: 24V DC 500 mA output, switched and unswitched power.
15.
Chassis: Constructed with 1/4 inch (6mm) gold zinc-plated steel for rust prevention.
16.
Cover: High-density, UV-resistant polyethylene cover.
17.
Internet Connectivity: MyQ Technology
a.
902 to 928 MHz
b.
50-channel FHSS (Frequency Hopping Spread Spectrum).
c.
LiftMaster 828LM Internet Gateway enables monitoring and control of gate operators via internet-enabled smartphone, tablet or computer.
d.
Provides two-way communication between gate operator and MyQ accessories to enable remote open, close and monitoring of gate.
18.
Receiver:
a.
Security+ 2.0 3-channel on-board receiver, holds up to 50 remote controls (unlimited with use of 811LM/813LM), HomeLink compatible
b.
Transmits 310 MHz, 315 MHz, 390 MHz.
19.
Inherent Reversing Sensor: Detects obstructions or increased loads. Reverses gate when closing or stops/reverses the gate when opening.
20.
Electronic Limits: Maintains accurate limit position throughout travel, even after using the manual disconnect.
21.
Dual-gate operation capabilities to allow 2 separate gate operators to operate in unison at a single entrance.
22.
Wireless Dual-Gate Operation:
a.
Built-in wireless communication will operate primary and secondary operator without having to run a communication wire.
b.
Support for Through-beam photo eye in the wireless dual-gate setup. Can attach emitter and receiver to each operator, eliminating the communication wire between them.
23.
PosiLock: Automatically powers the operator and returns a gate to the closed position when gate is pushed off of its closed limit.
24.
Bi-Part Delay: Selectable feature for dual-gate applications. Firmware monitors speed and position of each gate and adjusts speed as necessary to ensure both the gates close at the same time.
25.
Synchronized Close: Selectable feature for dual-gate applications. Monitors the speed and position of each gate and adjusts speed as necessary to ensure both the gates close at the same time.
26.
LED Diagnostic Display: Simplifies installation and troubleshooting.
27.
Colored Terminal Blocks: Provides easy identification of safety and fire department inputs.
28.
Alarm Reset Button: Instantly resets the built-in safety alarm siren.
29.
Fire Department Compliant: Selectable settings allow gate to auto open on power failure or battery depletion.
30.
Surge Suppression: Industrial strength on high and low voltage outputs. Protects against lightning strikes at a 50-foot (15240 mm) radius.
31.
Keyed Manual Disconnect: Simple-to-use disconnect allows gate to be operated manually and maintain limit position once re-engaged.
32.
Operating Temperature Range:
a.
Without Heater: -4 degrees F (-20 degrees C) to 140 degrees F (60 degrees C)
b.
With Optional Heater: -40 degrees F (-40 degrees C) to 140 degrees F (60 degrees C)
 
** NOTE TO SPECIFIER ** Unit comes with MyQ Enabled Technology built in. Pair it with MyQ Enabled accessories to maximize the capabilities of MyQ Enabled Technology. Delete optional accessories if not required.
 
33.
MyQ Enabled Accessories:
a.
LiftMaster 828LM Internet Gateway: Allows remote monitoring from Internet-enabled computer or smartphone.
b.
LiftMaster 829LM Garage and Gate Monitor: Allows remote monitoring and operation.
c.
LiftMaster 823LM Remote Light Switch: Controls light remotely.
d.
LiftMaster 825LM Remote Light Control: Allows remote monitoring and operation.
 
** NOTE TO SPECIFIER ** Delete optional accessories if not required.
 
34.
Accessories: Safety Monitoring Devices:
a.
Monitored Photo Eyes and Wireless Edge Kits.
1)
LiftMaster LMRRU Reflective Photo Eyes.
2)
LiftMaster LMTBU Thru-Beam Photo Eyes.
3)
LiftMaster LMWEKITU Wireless Edge Kith with Transmitter and Receiver.
4)
LiftMaster LMWETXU Wireless Edge Transceiver
b.
Wired Monitored Edges (all require use of LMWEKITU)
1)
LiftMaster S50 Small Profile Monitored Edge
2)
LiftMaster L50 Large Profile Monitored Edge
3)
LiftMaster WS4 Wrap-Around 4 foot (1219 mm) square monitored edge
4)
LiftMaster WS5 Wrap-Around 5 foot (1524 mm) square monitored edge
5)
LiftMaster WS6 Wrap-Around 6 foot (1829 mm) square monitored edge
6)
LiftMaster WR4 Wrap-Around 4 foot (1219 mm) square monitored edge
7)
LiftMaster WR5 Wrap-Around 5 foot (1524 mm) square monitored edge
8)
LiftMaster WR6 Wrap-Around 6 foot (1829 mm) square monitored edge
35.
Accessories: Provide the optional accessories listed below.
a.
LiftMaster KPW5 Wireless Commercial Keypad
b.
LiftMaster KPW250 Wireless Commercial Keypad
c.
LiftMaster SP10W12V: 10W Solar Panel Kit
d.
LiftMaster MG1300 Maglock. 1,300 pound (590 kg) holding force.
e.
LiftMaster 892LT 2-Button Security+ 2.0 Learning Remote Control.
f.
LiftMaster 894LT 4-Button Security+ 2.0 Learning Remote Control.
g.
LiftMaster 811LM 1-button Encrypted DIP Remote Control.
h.
LiftMaster 813LM 3-Button Encrypted DIP Remote Control.
 
** NOTE TO SPECIFIER ** Delete if not required.
 
I.
Gate Operators: LiftMaster SL3000 Series Commercial Slide Gate Operators.
 
** NOTE TO SPECIFIER ** Delete models not required.
 
1.
LiftMaster SL3000501U Commercial Slide Gate Operator for high-traffic applications.
a.
High Cycle High Temperature 1/2 HP Continuous Duty Motor with Class H High Temperature Insulation.
b.
Maximum Gate Weight: 1,000 pounds (454 kg.).
c.
Maximum Gate Length: 37 feet (11.2 m).
d.
Recommended Cycles/Hour: Continuous duty.
2.
LiftMaster SL3000101U Commercial Slide Gate Operator with 1 HP capacity for heavy-duty applications.
a.
Description: Two High Cycle High Temperature 1/2 HP motors with Class H High Temperature Insulation and a heavy-duty transmission, designed for large, heavy wrought-iron gates.
b.
Pulling Torque: 210 pounds (95.2 kg) of pulling torque.
c.
Maximum Gate Weight: 2,000 pounds (907.2 kg).
d.
Maximum Gate Length: 37 feet (11.3 m).
e.
Recommended Cycles/Hour: Continuous duty.
 
** NOTE TO SPECIFIER ** To be UL 325 Compliant, two independent safety entrapment protection devices must be installed at each entrapment zone (the inherent reversing system in this gate operator counts as one device). Devices such as monitored photo eyes or edge sensors are required to be installed with this operator.
 
3.
Warranty: 5 years for commercial applications, 7 years for residential applications.
4.
Compliance: UL Listed. Compliant to the UL 325, UL 991 and CSA C22.2 No. 247 standards.
a.
This model is intended for use in Class I, II, III and IV vehicular slide gate applications.
b.
To be UL 325 compliant, two independent safety entrapment protection devices must be installed at each entrapment zone (the inherent reversing system in this gate operator counts as one device). Devices such as monitored photo eyes or edge sensors are required to be installed with this operator.
c.
Only LiftMaster monitored photo eyes or edge sensors may be used with this operator to meet the UL 325 Standard.
5.
Monitored Safety Inputs: 3 inputs per board (main board and expansion board) totaling 6 inputs with any combination of up to:
a.
Main Board:
1)
1 Monitored Close Photo Eye input
2)
1 Monitored Open Photo Eye input
3)
1 Monitored Open Safety Edge or Open Photo Eye input
b.
Expansion Board
1)
2 Monitored Safety Edge or Photo Eye inputs (selectable for Open or Close).
2)
1 Monitored Photo Eye input (selectable for Open or Close).
c.
8 Monitored edges available when Transceiver is added.
6.
Electrical Power Requirements: 115V, single phase.
a.
Accessory Electrical Power Requirements: 24V DC 500 mA output, switched or unswitched power.
7.
Wormgear Reduction: Commercial oil bath gearboxes, 30:1 wormgear reduction.
8.
Gate Traveling Speed: 12 inches (305 mm) per second.
9.
Chassis: Constructed with 1/4-inch (6 mm) sanded, welded and gold zinc-plated sheet metal.
10.
Finishing: Metal parts are gold zinc-plated for rustproof protection.
11.
Cover: High-density UV-resistant polyethylene material.
12.
Internet Connectivity: MyQ Technology.
a.
902 to 928 MHz
b.
50-channel FHSS (Frequency Hopping Spread Spectrum).
c.
LiftMaster 828LM Internet Gateway enables monitoring and control of gate operators via internet-enabled smartphone, tablet or computer
d.
Provides two-way communication between gate operator and MyQ accessories to enable remote open, close and monitoring of gate.
13.
Receiver:
a.
Security+ 2.0 3-channel on-board radio receiver, holds up to 50 remote controls (unlimited with use of 811LM/813LM), HomeLink compatible
b.
Transmits 310 MHz, 315MHz, 390 MHz
14.
Inherent Reversing Sensor: Detects obstructions or increased loads. Reverses gate when closing or stops/reverses the gate when opening.
15.
Lockable External Manual Disconnect: Allows gate to be opened in the event of a power loss without removing the operator cover. Connect to optional Fire Department Box to meet local fire code.
16.
Wireless Dual-Gate Operation:
a.
Built-in wireless communication will operate primary and secondary operator without having to run a communication wire.
b.
Support for through-beam photo eye in the wireless dual-gate setup. Can attach emitter and receiver to each operator, eliminating the communication wire between them.
17.
Bi-Part Delay: Selectable feature for dual-gate applications. Dial provides manual adjustment to control delay as necessary to ensure primary gate closes last, avoiding potential damage to the gate.
18.
LED Diagnostic Display: Simplifies installation and troubleshooting.
19.
Colored Terminal Blocks: Provides easy identification of safety and fire department inputs.
20.
Programmable Auxiliary Relays: 2 programmable relays with 6 settings each.
a.
Pre-warning or gate-in motion sounder
b.
Switch on/off devices at open or Close Limits or while gate is in motion.
c.
Tamper detection if gate is pushed off Close Limit
d.
Cycle quantity feedback.
e.
Red/Green Light to control gate traffic.
21.
Quick Close, Anti-Tailgate: Quickly secures property, preventing unauthorized access.
22.
Sequenced Access Management: Capable of sequentially controlling the operator in tandem with a barrier gate.
23.
Surge/Lightning Protection: Industrial surge protection on high and low voltage inputs. Protects against lightning strikes at a 50-foot (15.2 m) radius.
24.
Plug-in loop detector inputs: Programmed inputs for shadow, interrupt and exit.
25.
External Alarm Reset Button: Allows for quick reset of the gate operator when the alarm has been activated.
26.
Warning Device: UL 325 compliant entrapment warning alarm has ability to be set for pre-operation warning; provides 3-second warning prior to and during gate movement.
27.
Mechanical Limit System: Maintains accurate gate position throughout gate travel, even after using manual disconnect.
28.
Operating Temperature Range:
a.
Without heater: -4 degrees F (-20 degrees C) to 140 degrees F (60 degrees C).
b.
With optional heater: -40 degrees F (-40 degrees C) to 140 degrees F (60 degrees C).
29.
MyQ Enabled Accessories:
a.
LiftMaster 828LM Internet Gateway: Allows remote monitoring from internet-enabled computer, tablet or smartphone.
b.
LiftMaster 829LM Garage and Gate Monitor: Allows remote monitoring and operation.
c.
LiftMaster 823LM Remote Light Switch: Controls light remotely
d.
LiftMaster 825LM Remote Light Control: Allows remote monitoring and operation.
30.
Accessories: Safety Monitoring Devices:
a.
Monitored Photo Eyes and Wireless Edge Kits.
1)
LiftMaster LMRRU Reflective Photo Eyes.
2)
LiftMaster LMTBU Thru-Beam Photo Eyes.
3)
LiftMaster LMWEKITU Wireless Edge Kith with Transmitter and Receiver.
4)
LiftMaster LMWETXU Wireless Edge Transceiver
b.
Wired Monitored Edges (all require use of LMWEKITU)
1)
LiftMaster S50 Small Profile Monitored Edge
2)
LiftMaster L50 Large Profile Monitored Edge
3)
LiftMaster WS4 Wrap-Around 4 foot (1219 mm) square monitored edge
4)
LiftMaster WS5 Wrap-Around 5 foot (1524 mm) square monitored edge
5)
LiftMaster WS6 Wrap-Around 6 foot (1829 mm) square monitored edge
6)
LiftMaster WR4 Wrap-Around 4 foot (1219 mm) square monitored edge
7)
LiftMaster WR5 Wrap-Around 5 foot (1524 mm) square monitored edge
8)
LiftMaster WR6 Wrap-Around 6 foot (1829 mm) square monitored edge
31.
Accessories: Provide the optional accessories listed below.
a.
LiftMaster LOOPDETLM Plug-in Loop Detector
b.
LiftMaster KPW250 - Wireless Commercial Keypad
c.
LiftMaster 892LT 2-Button Security+ 2.0 Learning Remote Control
d.
LiftMaster 894LT 4-Button Security+ 2.0 Learning Remote Control
e.
LiftMaster 811LM 1-Button Encrypted DIP Remote Control
f.
LiftMaster 813LM 3-Button Encrypted DIP Remote Control
g.
LiftMaster IPAC - Internet Protocol Access Control Entry System
h.
LiftMaster EL2000SS Stainless Steel Commercial and Gated Community Telephone Entry System.
i.
LiftMaster Star1000 Commercial Access Control Receiver
j.
LiftMaster PPWR Passport Receiver with Security+ 2.0 Technology
k.
LiftMaster PPV1 Passport 1-Button Remote
l.
LiftMaster PPK1 Passport 1-Button Mini Remote
m.
LiftMaster KPR2000 Single Access Remote Control Keypad and Proximity Reader
n.
LiftMaster HTRNB Heater Kit
o.
LiftMaster Power Wheels, 4 inch (101 mm) or 6 inch (152 mm) heat treated wheels.
 
** NOTE TO SPECIFIER ** Delete if not required.
 
J.
Gate Operators: LiftMaster SL595 Industrial Gear-Driven Slide Gate Operator.
 
** NOTE TO SPECIFIER ** To be UL 325 Compliant, two independent safety entrapment protection devices must be installed at each entrapment zone (the inherent reversing system in this gate operator counts as one device). Devices such as monitored photo eyes or edge sensors are required to be installed with this operator.
 
1.
Compliance: UL Listed. Compliant to the UL 325, UL 991 and CSA C22.2 No. 247 standards.
a.
This model is intended for use in Class I, II, III and IV vehicular slide gate applications.
b.
To be UL 325 compliant, two independent safety entrapment protection devices must be installed at each entrapment zone (the inherent reversing system in this gate operator counts as one device). Devices such as monitored photo eyes or edge sensors are required to be installed with this operator.
c.
Only LiftMaster monitored photo eyes or edge sensors may be used with this operator to meet the UL 325 Standard.
2.
Monitored Safety Inputs: 3 inputs per board (main board and expansion board) totaling 6 inputs with any combination of up to:
a.
Main Board:
1)
1 Monitored Close Photo Eye input
2)
1 Monitored Open Photo Eye input
3)
1 Monitored Open Safety Edge or Open Photo Eye input
b.
Expansion Board
1)
2 Monitored Safety Edge or Photo Eye inputs (selectable for Open or Close).
2)
1 Monitored Photo Eye input (selectable for Open or Close).
c.
8 Monitored edges available when Transceiver is added.
3.
Warranty: 2 years.
4.
Operator Speed: 12 inches (305 mm) per second.
5.
Electrical Power Requirements:
a.
115/208/230V AC, single phase, 60 Hz.
b.
208/230/460/575V AC, 3-phase, 60 Hz.
6.
Accessory Electrical Power Requirements: 24V AC.
a.
Main Board: 12V AC, maximum 500mA.
b.
Terminal Strip:
1)
2.2A maximum for 115/208-230V AC, single phase.
2)
2.2A maximum for 208/230-460 V AC, three phase
3)
1.3A maximum for 575V AC, three phase
7.
Gear Reduction: 20:1 wormgear reducer in synthetic oil bath.
 
** NOTE TO SPECIFIER ** Delete motor options not required.
 
8.
Motor: Switchless 1 HP, continuous duty
a.
Capacity: Supports gate lengths up to 70 feet (21.5 m) and gate weights up to 1,700 pounds(71 kg).
b.
Recommended Cycles per Hour: 25.
9.
Motor: Switchless 1 1/2HP, continuous duty (115/230V, single phase only).
a.
Capacity: Supports gate lengths up to 80 feet (24.4 m) and gate weights up to 2,100 pounds (953 kg).
b.
Recommended Cycles per Hour: 25.
10.
Motor: Switchless 2 HP, continuous duty (208/230/460/575V, 3- phase only).
a.
Capacity: Supports gate lengths up to 80 feet (27.4 m) and gate weights up to 2,500 pounds (1134 kg).
b.
Recommended Cycles per Hour: 25.
11.
Metal Frame: 7 gauge pre-galvanized steel.
12.
Chassis: Powder-coated galvanized steel.
13.
Enclosure: NEMA 3R enclosure; oil-tight, weatherproof NEMA 3R cabinet, lockable.
14.
Chain: #50 nickel-plated, 25 feet (7620 mm) supplied with each unit.
15.
Gearbox: All-weather.
16.
Internet Connectivity: MyQ Technology.
a.
902 to 928 MHz
b.
50-channel FHSS (Frequency Hopping Spread Spectrum).
c.
LiftMaster 828LM Internet Gateway enables monitoring and control of gate operators via internet-enabled smartphone, tablet or computer
d.
Provides two-way communication between gate operator and MyQ accessories to enable remote open, close and monitoring of gate.
17.
Receiver:
a.
Security+ 2.0 3-channel on-board radio receiver, holds up to 50 remote controls (unlimited with use of 811LM/813LM), HomeLink compatible
b.
Transmits 310 MHz, 315MHz, 390 MHz
18.
Inherent Reversing Sensor: Utilizes Current Sense and RPM Sensor to detect obstructions or increased loads. Reverses gate when closing or stops/reverses the gate when opening.
19.
Lockout/Tagout: Prevents power from being switched on when servicing operator. Safeguards workers from high voltage power.
20.
Wireless Dual-Gate Operation:
a.
Built-in wireless communication will operate primary and secondary operator without having to run a communication wire.
b.
Support for through-beam photo eye in the wireless dual-gate setup. Can attach emitter and receiver to each operator, eliminating the communication wire between them.
21.
LED Diagnostic Display: Simplifies installation and troubleshooting.
22.
Colored Terminal Blocks: Provides easy identification of safety and fire department inputs.
23.
Programmable Auxiliary Relays: 2 programmable relays with 6 settings each.
a.
Pre-warning or gate-in motion sounder
b.
Switch on/off devices at open or Close Limits or while gate is in motion.
c.
Tamper detection if gate is pushed off Close Limit
d.
Cycle quantity feedback.
e.
Red/Green Light to control gate traffic.
24.
Quick Close, Anti-Tailgate: Quickly secures property, preventing unauthorized access.
25.
Sequenced Access Management: Capable of sequentially controlling the operator in tandem with a barrier gate.
26.
Surge/Lightning Protection: Industrial Surge Protection on high and low voltage inputs. Protects against lightning strikes at a 50-foot (15.2m) radius.
27.
Plug-in Loop Detector Inputs: Programmed inputs for shadow, interrupt and exit.
28.
External Alarm Reset Button: Allows for quick reset of the gate operator when the alarm has been activated.
29.
Warning Device: UL 325 compliant entrapment warning alarm has ability to be set for pre-operation warning; provides a 3-second warning prior to and during gate movement.
30.
Maximum Run Timer: Protects against damage to the gate and operator by limiting the unit's runt time to 120 seconds.
31.
Lockable External Manual Disconnect: Allows gate to be opened in the event of a power loss without removing the operator cover.
32.
Mechanical Braking: the mechanical braking system adds substantial gate position control at all points in travel. The solenoid-actuated b rake system also prevents the gate from being back-driven
33.
Friction Clutch: Adjustable friction clutch helps protect gate and operator from damage should the gate meet an obstruction.
34.
Limit Settings: Driven limit nut switches are fully adjustable to provide precision, accuracy and reliability.
35.
Operating Temperature Range:
a.
Without heater: -4 degrees F (-20 degrees C) to 140 degrees F (60 degrees C).
b.
With optional heater: -40 degrees F (-40 degrees C) to 140 degrees F (60 degrees C).
36.
MyQ Enabled Accessories:
a.
LiftMaster 828LM Internet Gateway: Allows remote monitoring from internet-enabled computer, tablet or smartphone.
b.
LiftMaster 829LM Garage and Gate Monitor: Allows remote monitoring and operation.
c.
LiftMaster 823LM Remote Light Switch: Controls light remotely
d.
LiftMaster 825LM Remote Light Control: Allows remote monitoring and operation.
37.
Accessories: Safety Monitoring Devices:
a.
Monitored Photo Eyes and Wireless Edge Kits.
1)
LiftMaster LMRRU Reflective Photo Eyes.
2)
LiftMaster LMTBU Thru-Beam Photo Eyes.
3)
LiftMaster LMWEKITU Wireless Edge Kith with Transmitter and Receiver.
4)
LiftMaster LMWETXU Wireless Edge Transceiver
b.
Wired Monitored Edges (all require use of LMWEKITU)
1)
LiftMaster S50 Small Profile Monitored Edge
2)
LiftMaster L50 Large Profile Monitored Edge
3)
LiftMaster WS4 Wrap-Around 4 foot (1219 mm) square monitored edge
4)
LiftMaster WS5 Wrap-Around 5 foot (1524 mm) square monitored edge
5)
LiftMaster WS6 Wrap-Around 6 foot (1829 mm) square monitored edge
6)
LiftMaster WR4 Wrap-Around 4 foot (1219 mm) square monitored edge
7)
LiftMaster WR5 Wrap-Around 5 foot (1524 mm) square monitored edge
8)
LiftMaster WR6 Wrap-Around 6 foot (1829 mm) square monitored edge
38.
Accessories: Provide the optional accessories listed below.
a.
LiftMaster LOOPDETLM Plug-in Loop Detector
b.
LiftMaster KPW250 - Wireless Commercial Keypad
c.
LiftMaster 892LT 2-Button Security+ 2.0 Learning Remote Control
d.
LiftMaster 894LT 4-Button Security+ 2.0 Learning Remote Control
e.
LiftMaster 811LM 1-Button Encrypted DIP Remote Control
f.
LiftMaster 813LM 3-Button Encrypted DIP Remote Control
g.
LiftMaster IPAC - Internet Protocol Access Control Entry System
h.
LiftMaster EL2000SS Stainless Steel Commercial and Gated Community Telephone Entry System.
i.
LiftMaster Star1000 Commercial Access Control Receiver
j.
LiftMaster PPWR Passport Receiver with Security+ 2.0 Technology
k.
LiftMaster PPV1 Passport 1-Button Remote
l.
LiftMaster PPK1 Passport 1-Button Mini Remote
m.
LiftMaster KPR2000 Single Access Remote Control Keypad and Proximity Reader
n.
LiftMaster HTRNB Heater Kit
o.
LiftMaster Power Wheels, 4 inch (101 mm) or 6 inch (152 mm) heat-treated wheels
 
** NOTE TO SPECIFIER ** Delete if not required.
 
K.
Gate Operators: LiftMaster SL585 Industrial Gear-Driven Slide Gate Operator.
 
** NOTE TO SPECIFIER ** To be UL 325 Compliant, two independent safety entrapment protection devices must be installed at each entrapment zone (the inherent reversing system in this gate operator counts as one device). Devices such as monitored photo eyes or edge sensors are required to be installed with this operator.
 
1.
Compliance: UL Listed. Compliant to the UL 325, UL 991 and CSA C22.2 No. 247 standards.
a.
This model is intended for use in Class I, II, III and IV vehicular slide gate applications.
b.
To be UL 325 compliant, two independent safety entrapment protection devices must be installed at each entrapment zone (the inherent reversing system in this gate operator counts as one device). Devices such as monitored photo eyes or edge sensors are required to be installed with this operator.
c.
Only LiftMaster monitored photo eyes or edge sensors may be used with this operator to meet the UL 325 Standard.
2.
Monitored Safety Inputs: 3 inputs per board (main board and expansion board) totaling 6 inputs with any combination of up to:
a.
Main Board:
1)
1 Monitored Close Photo Eye input
2)
1 Monitored Open Photo Eye input
3)
1 Monitored Open Safety Edge or Open Photo Eye input
b.
Expansion Board
1)
2 Monitored Safety Edge or Photo Eye inputs (selectable for Open or Close).
2)
1 Monitored Photo Eye input (selectable for Open or Close).
c.
8 Monitored edges available when Transceiver is added.
3.
Warranty: 2 years.
4.
Operator Speed: 11 inches (279.4 mm) per second.
 
** NOTE TO SPECIFIER ** Delete power requirements not required.
 
5.
Electrical Power Requirements:
a.
115/208/230V AC, single phase, 60 Hz.
b.
208/230/460/575V AC, 3-phase, 60 Hz.
6.
Accessory Electrical Power Requirements: 24V AC.
a.
Main Board: 12V AC, maximum 500mA.
b.
Terminal Strip:
1)
2.2A maximum for 115/208-230V AC, single phase.
2)
2.2A maximum for 208/230-460 V AC, three phase
3)
1.3A maximum for 575V AC, three phase
7.
Gear Reduction: 20:1 wormgear reducer in synthetic oil bath.
 
** NOTE TO SPECIFIER ** Delete motor options not required.
 
8.
Motor: Switchless 1/2 HP, continuous duty
a.
Capacity: Supports gate lengths up to 45 feet (13 m) and gate weights up to 1,000 pounds(454 kg).
b.
Recommended Cycles per Hour: 20.
9.
Motor: Switchless 1 HP, continuous duty.
a.
Capacity: Supports gate lengths up to 70 feet (21 m) and gate weights up to 1,600 pounds (725 kg).
b.
Recommended Cycles per Hour: 20.
10.
Motor: Switchless 1 1/2 HP, continuous duty (115/230V, single phase only).
a.
Capacity: Supports gate lengths up to 75 feet (23 m) and gate weights up to 1,900 pounds (862 kg).
b.
Recommended Cycles per Hour: 20.
11.
Metal Frame: 7 gauge pre-galvanized steel.
12.
Chassis: Powder-coated galvanized steel.
13.
Enclosure: Weather-resistant, lockable, 16-gauge steel cover.
14.
Chain: #50 nickel-plated, 25 feet (7620 mm) supplied with each unit.
15.
Gearbox: All-weather.
16.
Internet Connectivity: MyQ Technology.
a.
902 to 928 MHz
b.
50-channel FHSS (Frequency Hopping Spread Spectrum).
c.
LiftMaster 828LM Internet Gateway enables monitoring and control of gate operators via internet-enabled smartphone, tablet or computer
d.
Provides two-way communication between gate operator and MyQ accessories to enable remote open, close and monitoring of gate.
17.
Receiver:
a.
Security+ 2.0 3-channel on-board radio receiver, holds up to 50 remote controls (unlimited with use of 811LM/813LM), HomeLink compatible
b.
Transmits 310 MHz, 315MHz, 390 MHz
18.
Inherent Reversing Sensor: Utilizes Current Sense and RPM Sensor to detect obstructions or increased loads. Reverses gate when closing or stops/reverses the gate when opening.
19.
Lockout/Tagout: Prevents power from being switched on when servicing operator. Safeguards workers from high voltage power.
20.
Wireless Dual-Gate Operation:
a.
Built-in wireless communication will operate primary and secondary operator without having to run a communication wire.
b.
Support for through-beam photo eye in the wireless dual-gate setup. Can attach emitter and receiver to each operator, eliminating the communication wire between them.
21.
LED Diagnostic Display: Simplifies installation and troubleshooting.
22.
Colored Terminal Blocks: Provides easy identification of safety and fire department inputs.
23.
Programmable Auxiliary Relays: 2 programmable relays with 6 settings each.
a.
Pre-warning or gate-in motion sounder
b.
Switch on/off devices at open or Close Limits or while gate is in motion.
c.
Tamper detection if gate is pushed off Close Limit
d.
Cycle quantity feedback.
e.
Red/Green Light to control gate traffic.
24.
Quick Close, Anti-Tailgate: Quickly secures property, preventing unauthorized access.
25.
Sequenced Access Management: Capable of sequentially controlling the operator in tandem with a barrier gate.
26.
Surge/Lightning Protection: Industrial Surge Protection on high and low voltage inputs. Protects against lightning strikes at a 50-foot (15.2m) radius.
27.
Plug-in Loop Detector Inputs: Programmed inputs for shadow, interrupt and exit.
28.
External Alarm Reset Button: Allows for quick reset of the gate operator when the alarm has been activated.
29.
Warning Device: UL 325 compliant entrapment warning alarm has ability to be set for pre-operation warning; provides a 3-second warning prior to and during gate movement.
30.
Maximum Run Timer: Protects against damage to the gate and operator by limiting the unit's runt time to 120 seconds.
31.
Lockable External Manual Disconnect: Allows gate to be opened in the event of a power loss without removing the operator cover.
32.
Mechanical Braking: the mechanical braking system adds substantial gate position control at all points in travel. The solenoid-actuated b rake system also prevents the gate from being back-driven
33.
Friction Clutch: Adjustable friction clutch helps protect gate and operator from damage should the gate meet an obstruction.
34.
Limit Settings: Driven limit nut switches are fully adjustable to provide precision, accuracy and reliability.
35.
Universal Footprint: Easily adapts operator to common footprints. Simplifies retrofit applications by adapting to pre-existing pads for Link, Stanley or LiftMaster operators.
36.
Operating Temperature Range:
a.
Without heater: -4 degrees F (-20 degrees C) to 140 degrees F (60 degrees C).
b.
With optional heater: -40 degrees F (-40 degrees C) to 140 degrees F (60 degrees C).
37.
MyQ Enabled Accessories:
a.
LiftMaster 828LM Internet Gateway: Allows remote monitoring from internet-enabled computer, tablet or smartphone.
b.
LiftMaster 829LM Garage and Gate Monitor: Allows remote monitoring and operation.
c.
LiftMaster 823LM Remote Light Switch: Controls light remotely
d.
LiftMaster 825LM Remote Light Control: Allows remote monitoring and operation.
38.
Accessories: Safety Monitoring Devices:
a.
Monitored Photo Eyes and Wireless Edge Kits.
1)
LiftMaster LMRRU Reflective Photo Eyes.
2)
LiftMaster LMTBU Thru-Beam Photo Eyes.
3)
LiftMaster LMWEKITU Wireless Edge Kith with Transmitter and Receiver.
4)
LiftMaster LMWETXU Wireless Edge Transceiver
b.
Wired Monitored Edges (all require use of LMWEKITU)
1)
LiftMaster S50 Small Profile Monitored Edge
2)
LiftMaster L50 Large Profile Monitored Edge
3)
LiftMaster WS4 Wrap-Around 4 foot (1219 mm) square monitored edge
4)
LiftMaster WS5 Wrap-Around 5 foot (1524 mm) square monitored edge
5)
LiftMaster WS6 Wrap-Around 6 foot (1829 mm) square monitored edge
6)
LiftMaster WR4 Wrap-Around 4 foot (1219 mm) square monitored edge
7)
LiftMaster WR5 Wrap-Around 5 foot (1524 mm) square monitored edge
8)
LiftMaster WR6 Wrap-Around 6 foot (1829 mm) square monitored edge
39.
Accessories: Provide the optional accessories listed below.
a.
LiftMaster LOOPDETLM Plug-in Loop Detector
b.
LiftMaster KPW250 - Wireless Commercial Keypad
c.
LiftMaster 892LT 2-Button Security+ 2.0 Learning Remote Control
d.
LiftMaster 894LT 4-Button Security+ 2.0 Learning Remote Control
e.
LiftMaster 811LM 1-Button Encrypted DIP Remote Control
f.
LiftMaster 813LM 3-Button Encrypted DIP Remote Control
g.
LiftMaster IPAC - Internet Protocol Access Control Entry System
h.
LiftMaster EL2000SS Stainless Steel Commercial and Gated Community Telephone Entry System.
i.
LiftMaster Star1000 Commercial Access Control Receiver
j.
LiftMaster PPWR Passport Receiver with Security+ 2.0 Technology
k.
LiftMaster PPV1 Passport 1-Button Remote
l.
LiftMaster PPK1 Passport 1-Button Mini Remote
m.
LiftMaster KPR2000 Single Access Remote Control Keypad and Proximity Reader
n.
LiftMaster HTRNB Heater Kit
o.
LiftMaster Power Wheels, 4 inch (101 mm) or 6 inch (152 mm) heat-treated wheels.
 
** NOTE TO SPECIFIER ** Delete if not required.
 
L.
Gate Operators: LiftMaster MA Series High-Performance Commercial Barrier Gate Operators with Built-in Battery Backup.
 
** NOTE TO SPECIFIER ** Delete model not required.
 
1.
LiftMaster MA Mega Arm Barrier Gate Operators with plastic cover.
2.
LiftMaster MAT Mega Arm Barrier Gate Operators with aluminum cover.
 
NOTE TO SPECIFIER ** To be compliant with UL 325 and industry safety guidelines, qualified secondary entrapment devices such as photo eyes or sensing edges are required to be installed with this gate operator.
 
3.
Compliance: UL Listed. Compliant to the UL 325, UL 991 and CSA C22.2 No. 247 standards.
a.
This model is intended for use in Class I, II, III and IV vehicular barrier gate applications.
4.
Warranty: 2 years for operator, 10 years for operator frame.
5.
Operation:
a.
Soft start/stop.
b.
Universal Controller: 8 inputs right or left-handed operation safety-stop.
c.
Anti-tailgate, quick-close features.
d.
Selectable Auto Open: 15 seconds after power failure or upon battery depletion barrier arm can be set to automatically open. 15-second delay helps reduce nuisance callbacks due to short power interruptions or brownouts.
6.
Operator Speed: Open or close speed of 2.5 seconds.
 
** NOTE TO SPECIFIER ** Delete gate arms not required.
 
7.
Gate Arm: Breakaway arm; held in place with breakaway retaining nuts. If arm is hit, it will break away and can be re-installed; can be set up for right or left-hand mount.
8.
Gate Arm: Arm one, articulating arm for low headroom environments.
9.
Gate Arm: Arm two, yellow.
10.
Gate Arm: Arm three, red/white retro-reflectorized DOT tape.
 
** NOTE TO SPECIFIER ** Confirm with manufacturer that arm length is available with arm type selected. Delete gate arms-length not required.
 
a.
Gate Arm Length: 12 feet (3658 mm).
b.
Gate Arm Length: 17 feet (5182 mm).
11.
Gate Arms: Arm four, yellow padded arm, 12 feet (3658 mm) and 14 feet (4267 mm) long.
12.
Motor: 1/2 HP, 24V DC, 800 RPM motor, 6,000 cycles per day.
13.
Electrical Power Requirements: 120/220V AC.
14.
Accessory Electrical Power Requirements: 24V DC 500 mA Battery Backup for accessory power.
15.
Gear Reduction: 60:1 reducer in synthetic oil bath.
16.
Chassis: Powder-coated 1/4-inch (6 mm) aluminum alloy.
17.
Drive System: No. 80 gearbox.
18.
Built-in Receiver: Single remote control solution for gate access and additional access points. Ability to add up to 50 remote control.
19.
Magnetic Limit Sensors: Designed for high-cycle applications, contain no moving parts to wear out, provide reliable operation.
20.
Surge Protection: Built-in at point of incoming line voltage from power spikes, surges.
21.
Auxiliary Outlet: Powers accessories devices.
22.
Battery Backup: Provides operation during power outages to maintain traffic flow.
23.
Automatically resets to normal operation when power is restored; provides up to 900 full cycles with a 12 foot (3658 mm) arm.
 
** NOTE TO SPECIFIER ** Delete optional accessories if not required.
 
24.
Accessories: Provide the optional accessories listed below.
a.
Clutch: Allows arm to be manually pushed open. Arm automatically resets to normal closed position upon receiving activation. Ideal for areas that are concerned with vandals damaging arm.
b.
LiftMaster EL2000 Commercial and Gated Community Telephone Entry System.
c.
LiftMaster STAR1000 Commercial Access Control Receiver.
d.
LiftMaster 811LM 1-Button Encrypted DIP Remote Control.
e.
LiftMaster 813LM 3-Button Encrypted DIP Remote Control.
f.
LiftMaster PPWR Passport Receiver with Security+ 2.0 Technology.
1)
LiftMaster PPV1 Passport 1-Button Remote.
2)
LiftMaster PPK1 Passport 1-Button Mini Remote.
g.
LiftMaster KPR2000 Single Access Control Keypad and Proximity Reader.
h.
LiftMaster LD7LP Low-Power Loop Detector.
i.
LiftMaster 361LM 1-Button Remote Control.
j.
LiftMaster 363LM 3-Button Remote Control.
 
** NOTE TO SPECIFIER ** Delete if not required.
 
M.
Gate Operators: LiftMaster MAS Series High-Speed Commercial Barrier Gate Operators with Built-in Battery Backup.
 
** NOTE TO SPECIFIER ** Delete model not required.
 
1.
LiftMaster MAS Mega Arm Barrier Gate Operators with plastic cover.
2.
LiftMaster MAST Mega Arm Barrier Gate Operators with aluminum cover.
 
NOTE TO SPECIFIER ** To be compliant with UL 325 and industry safety guidelines, qualified secondary entrapment devices such as photo eyes or sensing edges are required to be installed with this gate operator.
 
3.
Compliance: UL Listed. Compliant to the UL 325, UL 991 and CSA C22.2 No. 247 standards.
a.
This model is intended for use in Class I, II, III and IV vehicular barrier gate applications.
4.
Warranty: 2 years.
5.
Operation:
a.
Soft start/stop.
b.
Universal Controller: 8 inputs right or left-handed operation safety-stop.
c.
Anti-tailgate, quick-close features.
d.
Selectable Auto Open: 15 seconds after power failure or upon battery depletion barrier arm can be set to automatically open. 15-second delay helps reduce nuisance callbacks due to short power interruptions or brownouts.
6.
Operator Speed: Open or close speed of 0.9 second.
 
** NOTE TO SPECIFIER ** Delete gate arms not required.
 
7.
Gate Arm: Breakaway arm; held in place with breakaway retaining nuts. If arm is hit, it will break away and can be re-installed; can be set up for right or left-hand mount.
8.
Gate Arm: Length 8 feet (2438 mm) long, yellow padded arm.
9.
Motor: 1/2 HP, 24V DC, 800 RPM motor, 10,000 cycles per day.
10.
Electrical Power Requirements: 120/220V AC.
11.
Accessory Electrical Power Requirements: 24V DC 500 mA Battery Backup for accessory power.
12.
Gear Reduction: 60:1 wormgear reduction in synthetic oil bath.
13.
Chassis: Powder-coated 1/4-inch (6.35 mm) T-6 aluminum alloy.
14.
Drive System: No. 80 gearbox.
15.
Built-in Receiver: Single remote control solution for gate access and additional access points. Ability to add up to 50 remote controls.
16.
Magnetic Limit Sensors: Designed for high-cycle applications, contain no moving parts to wear out, provide reliable operation.
17.
Surge Protection: Built-in at point of incoming line voltage from power spikes, surges.
18.
Auxiliary Outlet: Powers accessories devices.
19.
Battery Backup: Provides operation during power outages to maintain traffic flow. Automatically resets to normal operation when power is restored; provides up to 900 full cycles with a 12 foot (3658 mm) arm.
 
** NOTE TO SPECIFIER ** Delete optional accessories if not required.
 
20.
Accessories: Provide the optional accessories listed below.
a.
Clutch: Allows arm to be manually pushed open. Arm automatically resets to normal closed position upon receiving activation. Ideal for areas that are concerned with vandals damaging arm.
b.
LiftMaster EL2000 Commercial and Gated Community Telephone Entry System.
c.
LiftMaster STAR1000 Commercial Access Control Receiver.
d.
LiftMaster 811LM 1-Button Encrypted DIP Remote Control.
e.
LiftMaster 813LM 3-Button Encrypted DIP Remote Control.
f.
LiftMaster PPWR Passport Receiver with Security+ 2.0 Technology.
1)
LiftMaster PPV1 Passport 1-Button Remote.
2)
LiftMaster PPK1 Passport 1-Button Mini Remote.
g.
LiftMaster KPR2000 Single Access Control Keypad and Proximity Reader.
h.
LiftMaster LD7LP Low-Power Loop Detector.
i.
LiftMaster 361LM 1-ButtonRemote Control.
j.
LiftMaster 363LM 3-Button Remote Control.
 
** NOTE TO SPECIFIER ** Delete if not required.
 
N.
Gate Operators: LiftMaster BG770 Industrial Barrier Gate Operator.
 
NOTE TO SPECIFIER ** To be compliant with UL 325 and industry safety guidelines, qualified secondary entrapment devices such as photo eyes or sensing edges are required to be installed with this gate operator.
 
1.
Compliance: ETL Listed. Compliant to the UL 325, UL 991 and CSA C22.2 No. 247 standards.
a.
This model is intended for use in Class I, II, III and IV vehicular barrier gate applications.
2.
Warranty: 2 years.
3.
Operator Speed: 90-degrees in 4 seconds.
 
** NOTE TO SPECIFIER ** Delete gate arms not required.
 
4.
Gate Arms: Standard, 12 foot (3658 mm) wood arms.
5.
Gate Arms: Provide optional 10-foot (3048 mm) PVC arms.
6.
Gate Arms: Provide optional 15-foot (4572 mm) aluminum arms, square, yellow and black stripes.
 
** NOTE TO SPECIFIER ** Delete power option not required.
 
7.
Electrical Power Requirements: 115/208/230V AC, single phase, 60 Hz.
 
** NOTE TO SPECIFIER ** Delete accessory power option not required.
 
a.
Accessory Electrical Power Requirements: One, 115V AC.
b.
Accessory Electrical Power Requirements: One, 24V AC.
8.
Electrical Power Requirements: 208/230/460/575V AC, 3-phase, 60 Hz.
a.
Accessory Electrical Power Requirements: One, 24V AC.
9.
Gear Reduction: 60:1 wormgear reduction in oil bath.
10.
Motor: 1/2 HP, continuous duty.
11.
Metal Frame: 11-gauge pre-galvanized steel.
12.
Enclosure: Powder-coated weather-resistant steel enclosure.
 
** NOTE TO SPECIFIER ** Delete configuration not required.
 
13.
Configuration: Standard.
14.
Configuration: Reverse cabinet modification: In the event of an obstruction close by the barrier gate the cabinet can be reversed to allow access to cabinet door.
15.
Control Inputs: Control inputs allow the connection of optional external devices like loop detectors, photo eyes, telephone entry systems, access control systems and radio receivers.
16.
Limit Settings: Driven limit cams are fully adjustable.
 
** NOTE TO SPECIFIER ** Delete optional accessories if not required.
 
17.
Accessories: Provide the optional accessories listed below.
a.
SAMS Limit Switch Modification: Compatible with sequenced access management systems, as a single or pair; compatible with systems with a GL control board.
b.
Dual-Gate Capability: Supports the operation of 2 separate gate operators in unison at a single entrance, assuring consistent, simultaneous open/close cycle for both operators and is bi-part capable.
c.
Timer-to-Close: Programmable module can be set from 1 to 1,024 seconds. The unit will automatically close when programmed time has expired.
d.
Plug-in Style Loop Detectors: Operator incorporates 2-harness support system that can accept up to 2 plug-in loop detectors for exit or hold-open functions.
e.
Long-Distance Wiring Module: Allows mounting accessories or controls beyond 100 feet (30 m) from the operator.
f.
Flex Red Light Strip: 10 feet (3048 mm) long.
g.
Thermostatically Controlled Heater: For use in extreme cold environments.
h.
Single-Button Radio Modification: Enables radio control to both open and close the barrier arm.
 
** NOTE TO SPECIFIER ** Delete if not required.
 
O.
Gate Operators: LiftMaster BG790 Industrial Barrier Gate Operator.
 
NOTE TO SPECIFIER ** To be compliant with UL 325 and industry safety guidelines, qualified secondary entrapment devices such as photo eyes or sensing edges are required to be installed with this gate operator.
 
1.
Compliance: ETL Listed. Compliant to the UL 325, UL 991 and CSA C22.2 No. 247 standards.
a.
This model is intended for use in Class I, II, III and IV vehicular barrier gate applications.
2.
Warranty: 2 years.
3.
Operator Speed: 11 seconds opening time.
 
** NOTE TO SPECIFIER ** Delete power option not required.
 
4.
Electrical Power Requirements: 115/208/230V AC, single phase, 60 Hz.
 
** NOTE TO SPECIFIER ** Delete accessory power option not required.
 
a.
Accessory Electrical Power Requirements: One, 115V AC.
b.
Accessory Electrical Power Requirements: One, 24V AC.
5.
Electrical Power Requirements: 208/230/460/575V AC, 3-phase, 60 Hz.
a.
Accessory Electrical Power Requirements: One, 24V AC.
6.
Gear Reduction: 60:1 wormgear reducer in oil bath.
7.
Motor: 1/2 HP, continuous duty.
8.
Metal Frame: 11-gauge pre-galvanized steel.
9.
Gate Arms: Includes 24-foot (7315 mm) wishbone arm with black and white stripes and 2 counterweights.
10.
Enclosure: Powder-coated weather-resistant steel enclosure.
 
** NOTE TO SPECIFIER ** Delete configuration not required.
 
11.
Configuration: Standard.
12.
Configuration: Reverse cabinet modification: In the event of an obstruction close by the barrier gate the cabinet can be reversed to allow access to cabinet door.
13.
Control Inputs: Control inputs allow the connection of optional external devices like loop detectors, photo eyes, telephone entry systems, access control systems and radio receivers.
14.
Limit Settings: Driven limit cams are fully adjustable.
 
** NOTE TO SPECIFIER ** Delete optional accessories if not required.
 
15.
Accessories: Provide the optional accessories listed below.
a.
Dual-Gate Capability: Supports the operation of 2 separate gate operators in unison at a single entrance, assuring consistent, simultaneous open/close cycle for both operators and is bi-part capable.
b.
Timer-to-Close: Programmable module can be set from 1 second to 17 minutes. The unit will automatically close when programmed time has expired.
c.
Plug-in Style Loop Detectors: Operator incorporates 2-harness support system that can accept up to 2 plug-in loop detectors for exit or hold-open functions.
d.
Long-Distance Wiring Module: Allows mounting accessories or controls beyond 100 feet (30 m) from the operator.
e.
Flex Red Light Strip: 10 feet (3048 mm) long.
f.
Thermostatically Controlled Heater: For use in extreme cold environments.
g.
Single-Button Radio Modification: Enables radio control to both open and close the barrier arm.
 
** NOTE TO SPECIFIER ** Delete if not required.
 
P.
Gate Operators: LiftMaster HCTDCU Series Heavy-Duty, High-Cycle Trolley Overhead Door/Gate Operators.
1.
LiftMaster HCTDCU Overhead Door and Gate Operator
 
** NOTE TO SPECIFIER ** Delete models not required.
 
a.
HCTDCPKGU08 - 8 feet (2438 mm) door/gate
b.
HCTDCPKGU10 - 10 feet (3048 mm) door/gate
c.
HCTDCPKGU12 - 12 feet (3658 mm) door/gate
 
** NOTE TO SPECIFIER ** To be UL 325 Compliant, two independent safety entrapment protection devices must be installed at each entrapment zone (the inherent reversing system in this gate operator counts as one device). Devices such as monitored photo eyes or edge sensors are required to be installed with this operator.
 
2.
Compliance: UL Listed. Compliant to the UL 325, UL 991 and CSA C22.2 No. 247 standards.
a.
This model is intended for use in Class II, III and IV vehicular gate applications.
b.
To be UL 325 compliant, two independent safety entrapment protection devices must be installed at each entrapment zone (the inherent reversing system in this gate operator counts as one device). Devices such as monitored photo eyes or edge sensors are required to be installed with this operator.
c.
Only LiftMaster monitored photo eyes or edge sensors may be used with this operator to meet the UL 325 Standard.
3.
Monitored Safety Inputs: 3 inputs per board (main board and expansion board) totaling 6 inputs with any combination of up to:
a.
Main Board:
1)
1 Monitored Close Photo Eye input
2)
1 Monitored Open Photo Eye input
3)
1 Monitored Open Safety Edge or Open Photo Eye input
b.
Expansion Board
1)
2 Monitored Safety Edge or Photo Eye inputs (selectable for Open or Close).
2)
1 Monitored Photo Eye input (selectable for Open or Close).
c.
8 Monitored edges available when Transceiver is added.
4.
Electrical Power Requirements:
 
** NOTE TO SPECIFIER ** Delete power option not required.
 
a.
115V AC, single phase
b.
230V AC, single phase.
5.
Motor: 24 DC, with soft start/stop operation.
a.
Duty cycle: Continuous
6.
Capacity:
a.
HCTDCPKGU08 - 8 feet (2438 mm) overhead door or gate up to 700 pounds (318 kg)
b.
HCTDCPKGU10 - 10 feet (3048 mm) overhead door or gate up to 700 pounds (318 kg)
c.
HCTDCPKFU12 - 12 feet (3658 mm) overhead door or gate up to 700 pounds (318 kg)
7.
Recommended Cycles per Day: Continuous
8.
Gate/Door Travel Speed: Selectable; Standard Open - up to 8 inches (305 mm) per second; Fast Open - up to 11 inches (279 mm) per second; Fast Close - up to 8 inches (305 mm) per second.
9.
Warranty: 5 years for commercial applications.
10.
Wormgear Reduction: Commercial oil bath gearbox with 28:1 ratio wormgear reduction running in synthetic oil bath.
11.
Battery Backup: Power Management system draws 14.8 mA when gate or door is idle with remote controls programmed. Provides 112 cycles on Battery Backup with two 7Ah batteries.
12.
Standby Time: Proves up to 72 days of standby power in the event of a power loss with two 7Ah batteries (excluding accessories).
13.
Accessory Electrical Power Requirements: 24V DC 500 mA output, switched and unswitched power.
14.
Dynamic Braking System: Adds substantial gate position control at all points in travel. The brake system also prevents the gate or door from being back-driven.
15.
Chassis: Constructed with 1/4 inch (6mm) gold zinc-plated steel for rust prevention.
16.
Trolley Assembly: Heavy-duty 12-gauge steel track with 6 UHMW rollers
17.
Noise Isolators: Designed for exceptionally quiet performance.
18.
Internet Connectivity: MyQ Technology
a.
902 to 928 MHz
b.
50-channel FHSS (Frequency Hopping Spread Spectrum).
c.
LiftMaster 828LM Internet Gateway enables monitoring and control of gate operators via internet-enabled smartphone, tablet or computer.
d.
Provides two-way communication between gate operator and MyQ accessories to enable remote open, close and monitoring of gate.
19.
Receiver:
a.
Security+ 2.0 3-channel on-board receiver, holds up to 50 remote controls, HomeLink compatible
b.
HomeLink compatible, version 4 and higher
c.
Transmits 310 MHz, 315 MHz, 390 MHz.
20.
Electronic limits: Maintains accurate limit position throughout travel, even after using the manual release handle.
21.
Soft Stop & Start during mid-travel reversal extends operator life under high-cycle, heavy gate use.
22.
LED Diagnostic Display: Simplifies installation and troubleshooting.
23.
Colored Terminal Blocks: Provides easy identification of safety and fire department inputs.
24.
Programmable Auxiliary Relays: 2 programmable relays with 6 settings each
a.
Pre-warning or gate-in-motion sounder.
b.
Switch on/off devices at open or Close Limits or while gate is in motion..
c.
Tamper detection if gate is pushed off Close Limit.
d.
Cycle quantity feedback.
e.
Red/Green light to control gate traffic.
25.
Quick Close, Anti-Tailgate: Closes the gate immediately after a vehicle pulls off of interrupt loop.
26.
Sequenced Access Management: Capable of sequentially controlling the operator in tandem with barrier gate.
27.
Plug-in Loop Detector Inputs: Programmed inputs for shadow, interrupt and exit.
28.
Alarm Reset Button: Instantly resets the built-in safety alarm siren.
29.
Fire Department Compliant: Selectable settings allow gate or door to auto open and power failure or battery depletion.
30.
Surge Suppression: Industrial strength on high and low voltage outputs.
31.
Keyed Manual Disconnect: Simple-to-use disconnect allows gate or door to be operated manually and maintain limit position once re-engaged.
32.
Operating Temperature Range: -4 degrees F (-20 degrees C) to 140 degrees F (60 degrees C)
33.
MyQ enabled Accessories:
a.
LiftMaster 828LM Internet Gateway: Allows remote monitoring from internet-enabled computer or smartphone.
b.
LiftMaster 829LM Garage and Gate Monitor: Allows remote monitoring and operation.
c.
LiftMaster 823LM Remote Light Switch: Controls light remotely.
d.
LiftMaster 825LM Remote Light Control: Allows remote monitoring and operation.
 
** NOTE TO SPECIFIER ** Delete optional accessories if not required.
 
34.
Accessories: Safety Monitoring Devices:
a.
Monitored Photo Eyes and Wireless Edge Kits.
1)
LiftMaster LMRRU Reflective Photo Eyes.
2)
LiftMaster CPSUN4G Thru-Beam Photo Eyes.
3)
LiftMaster LMTBU Thru-Beam Photo Eyes.
4)
LiftMaster CPS-OPEN4 Monitored Dual Sided Photo Eye
5)
LiftMaster LMWEKITU Wireless Edge Kith with Transmitter and Receiver.
6)
LiftMaster LMWETXU Wireless Edge Transceiver
b.
Wired Monitored Edges (can be used with LMWEKITU)
1)
LiftMaster S50 Small Profile Monitored Edge
a)
LiftMaster S504AL Small Profile Edge, 4 foot (1219 mm) aluminum channel
b)
LiftMaster S505AL Small Profile Edge, 5 foot (1524 mm) aluminum channel
c)
LiftMaster S506AL Small Profile Edge, 6 foot (1829 mm) aluminum channel
2)
LiftMaster L50 Large Profile Monitored Edge
a)
LiftMaster L504AL Large Profile Edge, 4 foot (1219 mm) aluminum channel
b)
LiftMaster L505AL Large Profile Edge, 5 foot (1524 mm) aluminum channel
c)
LiftMaster L506AL Large Profile Edge, 6 foot (1829 mm) aluminum channel
3)
LiftMaster WS4 Wrap-Around 4 foot (1219 mm) square monitored edge
4)
LiftMaster WS5 Wrap-Around 5 foot (1524 mm) square monitored edge
5)
LiftMaster WS6 Wrap-Around 6 foot (1829 mm) square monitored edge
6)
LiftMaster WR4 Wrap-Around 4 foot (1219 mm) round monitored edge
7)
LiftMaster WR5 Wrap-Around 5 foot (1524 mm) round monitored edge
8)
LiftMaster WR6 Wrap-Around 6 foot (1829 mm) round monitored edge
c.
Optical Edges for Overhead Doors
1)
LiftMaster OES-SD16; 16' Sectional Door Edge Kit
2)
LiftMaster OES-SD24; 24' Sectional Door Edge Kit
3)
LiftMaster OES5104; 2" x 2" PVC Channel
35.
Accessories: Provide the optional accessories listed below.
a.
LiftMaster LOOPDETLM Plug-in Loop Detector
b.
LiftMaster KPW250 Wireless Commercial Keypad
c.
LiftMaster RGL24LY Red/Green Traffic Light
d.
LiftMaster 892LT 2-Button Security+ 2.0 Learning Remote Control.
e.
LiftMaster 894LT 4-Button Security+ 2.0 Learning Remote Control.
f.
LiftMaster 811LM 1-button Encrypted DIP Remote Control.
g.
LiftMaster 813LM 3-Button Encrypted DIP Remote Control.
h.
LiftMaster IPAC Internet Protocol Access Control Entry System.
i.
LiftMaster IPACIPDCC IPAC 2 Door IPDC - Cloud
j.
LiftMaster EL2000SS Stainless Steel Commercial and Gated Community Telephone Entry System
k.
LiftMaster Star1000 Commercial Access Control Receiver
l.
LiftMaster PPWR Passport Receiver with Security+ 2.0 Technology
m.
LiftMaster PPV1 Passport 1-Button Remote
n.
LiftMaster PPK1 Passport 1-Button Mini Remote
o.
LiftMaster KPR2000 Single Access Remote Control Keypad and Proximity Reader
 
** NOTE TO SPECIFIER ** Delete if not required.
 
Q.
LiftMaster LMRRU Monitored Retro-Reflective Photo Eye.
 
** NOTE TO SPECIFIER ** LiftMaster LMRRU Compatibility: LiftMaster Models CSL24U, CSW24U, RSL12U, RSW12U, LA400DC, LA412DC, LA500DC, SL3000, CSW200, SL585, SL595, HCTDCU.
Delete model not required.
 
1.
LiftMaster LMRRU Monitored Retro Reflective Photo Eye: Photo eye assembly, with 6 foot (1829 mm) cable, photo eye bracket, photo eye hood, square reflector, reflector hood, reflector bracket, mounting hardware.
2.
Compliance:
a.
Meets UL 325 requirements for gates as secondary entrapment protection.
b.
Enclosure: NEMA 4X waterproof and corrosion-resistant enclosure.
3.
Installation Design:
a.
Single-sided, does not require trenching.
b.
Alignment: LED indicator with visible feedback and adjustable photo eye assembly.
4.
Photo Eye Beam: Polarized beam technology sends and receives beam through 2 polarized filters to avoid interference from shiny objects.
5.
Sensing Distance: 50 feet (15 m).
6.
Operating Temperature Range: -40 degrees F (-40 degrees C) to 149 degrees F (65 degrees C).
7.
Power: LiftMaster 2-wire photo eye interface.
8.
Operating Current: Greater than or equal to 40 mA.
9.
Output Versions: Monitored 2-wire.
10.
Response time: 35 milliseconds.
11.
Wake-up Delay: 500 milliseconds.
12.
Connection: 6 foot (1829 mm) cable, fine stranded with crimp terminals wire size 18 gauge.
 
** NOTE TO SPECIFIER ** Delete if not required.
 
R.
LiftMaster LMTBU Monitored Through Beam Photo Eye.
 
** NOTE TO SPECIFIER ** LiftMaster LMTBU Compatibility: LiftMaster Models CSL24U, CSW24U, RSL12U, RSW12U, LA400DC, LA412DC, LA500DC, SL3000, CSW200, SL585, SL595, HCTDCU.
 
1.
LiftMaster LMTBU Monitored Through Beam Photo Eye: Photo eye emitter, photo eye receiver each with 6 foot (1829 mm) cable, 2X photo eye bracket, 2X photo eye hood, mounting hardware.
2.
Compliance:
a.
Meets UL 325 requirements for gates as secondary entrapment protection.
b.
Enclosure: NEMA 4X waterproof and corrosion-resistant enclosure.
3.
Installation Design:
a.
Dual-sided, if used in dual gate applications. Operator wireless communication can be used to avoid trenching.
b.
Alignment: LED indicator with visible feedback and adjustable photo eye assembly.
4.
Photo Eye Beam: Polarized beam technology sends and receives beam through 2 polarized filters to avoid interference from shiny objects.
5.
Sensing Distance: 90 feet (27 m).
6.
Operating Temperature Range: -40 degrees F (-40 degrees C) to 149 degrees F (65 degrees C).
7.
Power: LiftMaster 2-wire photo eye interface.
8.
Operating Current: Greater than or equal to 40 mA.
9.
Output Versions: Monitored 2-wire.
10.
Response time: 35 milliseconds.
11.
Wake-up Delay: 500 milliseconds.
12.
Connection: 6 foot (1829 mm) cable, fine stranded with crimp terminals wire size 18 gauge.
PART 3 EXECUTION
 
3.1
EXAMINATION AND PREPARATION
A.
Inspect and prepare substrates using the methods recommended by the manufacturer for achieving best result for the substrates under project conditions.
B.
Do not proceed with installation until substrates have been prepared using the methods recommended by the manufacturer and deviations from manufacturer's recommended tolerances are corrected. Commencement of installation constitutes acceptance of conditions.
C.
If preparation is the responsibility of another installer, notify Architect in writing of deviations from manufacturer's recommended installation tolerances and conditions.
3.2
INSTALLATION
A.
Install in accordance with manufacturer's instructions. Test for proper operation and adjust until satisfactory results are obtained.
3.3
PROTECTION
A.
Protect installed products until completion of project.
B.
Touch-up, repair or replace damaged products before Substantial Completion.
END OF SECTION