1. Configure MORTAR NET USA - MASONRY ACCESSORIES:

MATERIALS

Note: Mortar Net is recommended by Manufactuer for commerical construction

and House Net is recommended for residential construction

Brick Cavity Wall Drainage System

Note: Manufacturer recommends that cavity should be no more than 1/4 inch wider than

1 inch and 2 inch material and 0.4 inch material should touch both the outer wythe and the inner wall

of masonry cavity. Material is compressible to allow for variation in wall cavity widths.

Mortar Net: SELECT MATERIAL and THICKNESS-----Nylon; 0.4 inches (10 mm)High-density polyethylene(HDPE); 1 inch (25 mm)Recycled polyester: 2 inch (51 mm)

House Net: SELECT THICKNESS-----0.4 inches (10 mm)1 inch (25 mm)2 inch (51 mm)

Brick Cavity Wall Weep Vents

Mortar Net Weep Vent: SELECT COLOR-----Match mortar color with section from manufacturer's standard colorsWhiteBrownTanGrayRedAlmond

Concrete Masonry Unit Cavity Wall Drainage System

Note: Blok-Flash is recommended by Manufactuer for drainage for depth of block and

BLockNet is recommended for exterior face and cell of block.

US-8 is for 8-inch wide CMU; US-10 is for 10-inch wide CMU: US-12 is for 12-inch wide CMU.

Blok-Flash: SELECT WIDTH-----Model US-8; 5-5/8 inches(143 mm)Model US-10; 7-5/8 inches(194 mm)Model US-12; 9-5/8 inches (245 mm)

BlockNet

2. When you are finished making selections:

Generate Spec: Word     WP   or   RTF