1. Configure Clark Western; Metal Lath and Steel Framing Systems - COLD-FORMED METAL FRAMING:
COMPONENTS
Structural Studs:
Cold-Formed galvanized steel C-studs
Flange Length:
SELECT FLANGE LENGTH
--------
1 5/8 inch (41mm) 162 flange (most common size)
2 inch (51mm) 200 flange
2 1/2 inch (64mm) 250 flange
3 inch (76 mm) 300 flange
3 1/2 inch (88.9 mm) 350 flange
Web Depth:
SELECT WEB DEPTH
--------
2 1/2 inch (64 mm) 250 depth (available only with 162 Flange)
3 1/2 inch (89 mm) 350 depth (available only with 162 Flange)
3 5/8 inch (92 mm) 362 depth (available only up to 250 Flange)
4 inch (102 mm) 400 depth (available only up to 250 Flange)
5 1/2 inch (140 mm) 550 depth (available only up to 250 Flange)
6 inch (152.4 mm) 600 depth (available only up to 250 Flange)
7 1/4 inch (184 mm) 725 depth (available only up to 250 Flange)
8 inch (203 mm) 800 depth (available only up to 250 Flange)
9 1/4 inch (235 mm) 925 depth (available only up to 250 Flange)
10 inch (254 mm) 1000 depth
11 1/2 inch (292 mm) 1150 depth
12 inch (305 mm) 1200 depth
13 1/2 inch (342.9 mm) 1350 depth
14 inch (355.6 mm) 1400 depth
16 inch (406.4 mm) 1600 depth
As indicated on drawings
Minimum Material Thickness:
SELECT MINIMUM MATERAL THICKNESS
--------
33 mil (20 gauge) (not available with 10 or 12 in. (1000 or 1200) web)
43 mil (18 gauge) (not available with 12 inch (1200) web)
54 mil (16 gauge)
68 mil (14 gauge)
97 mil (12 gauge)
118 mil (10 gauge)
As required by design
As indicated on drawings
Minimum Yield Strength:
SELECT MINIMUM YIELD STRENGTH
--------
33ksi (227 MPa) (for 33mils through 118 mils)
50ksi (345 MPa) (optional for 54 mils and up)
As required by design
Structural Track:
Cold-Formed galvanized steel runner tracks
Flange Length:
SELECT FLANGE LENGTH
--------
1 1/4 inch (32 mm) T125 flange (most common)
1 1/2 inch (38 mm) T150 flange
2 inch (51 mm) T200 flange
2 1/2 inch (63 mm) T250 flange
3 inch (76mm) T300 flange
3 1/2 inch (89 mm) T350 flange
Web Depth:
SELECT WEB DEPTH
--------
2 1/2 inch (64mm) 250 depth
3 1/2 inch (89mm) 350 depth
3 5/8 inch (92mm) 362 depth
4 inch (102mm) 400 depth
5 1/2 inch (140mm) 550 depth
6 inch (152.4mm) 600 depth
7 1/4 inch (184 mm) 725 depth
8 inch (203mm) 800 depth
9 1/4 (235 mm) 925 depth
10 inch (254mm) 1000 depth
11 1/2 inch (292 mm) 1150 depth
12 inch (305mm) 1200 depth
13 1/2 inch (342.9 mm) 1350 depth
14 inch (355.6 mm) 1400 depth
16 inch (406.4 mm) 1600 depth
Track Web Size to match stud web size
Minimum Material Thickness:
SELECT MINIMUM MATERIAL THICKNESS
--------
33 mil (20 gauge) (not available with 10 or 12 in. (1000 or 1200) web)
43 mil (18 gauge) (not available with 12 inch (1200) web)
54 mil (16 gauge)
68 mil (14 gauge)
97 mil (12 gauge)
118 mil (10 gauge)
As required by design
As indicated on drawings
Track Thickness to match wall stud thickness
Minimum Yield Strength:
SELECT MINIMUM YIELD STRENGTH
--------
33ksi (227 MPa) (for 33mils through 118mils)
50ksi (345 MPa) (optional for 54mils and up)
As required by design
Deflection Track:
Cold-Formed Deep Leg Runner Slip Track
Deflection Track Leg Length:
SELECT LEG LENGTH
--------
2 inch (51 mm) T200 flange
2 1/2 inch (63 mm) T250 flange ( required for a 3/4" deflection gap)
3 inch (76mm) T300 flange (required for a 1" deflection gap)
3 1/2 inch (89 mm) T350 flange
As required by design
Deflection Track Thickness:
SELECT THICKNESS
--------
33 mil (20 gauge)
43 mil (18 gauge)
54 mil (16 gauge)
68 mil (14 gauge)
97 mil (12 gauge)
118 mil (10 gauge)
As required by design
Minimum Yield Strength:
SELECT MINIMUM YIELD STRENGTH
--------
33ksi (227 MPa) (for 33mils through 118mils)
50ksi (345 MPa) (optional for 54mils and up)
As required by design
Deflection Clips:
SELECT CLIP
--------
Clark Slide Clip: Minimum Thickness: 68mils (14ga) 0.0677" (50ksi)
Clark Channel Slide Clip: Minimum Thickness: 68mils (14ga) 0.0677" (50ksi)
Clark Channel Slide Clip: Minimum Thickness: 97mils (12ga) 0.0966" (50ksi)
Slide Clips: As required by design
Standard Clip Angels:
SELECT MINIMUM THICKNESS
--------
54mils (16ga) 0.0538" (50ksi)
68mils (14ga) 0.0677" (50ksi)
97mils (12ga) 0.0966" (50ksi)
As required by design
SwiftClip Support Clips:
Clark Western's Pre-punched support clips
SwiftClip L-Series:
1-1/2" Leg x 1-1/2" Leg, length and thickness per design
1-1/2" Leg x 3" Leg, length and thickness per design
3" Leg x 3" Leg, length and thickness per design
As required by design
U-Channel (CRC Cold Rolled Channel):
U-Channel Size:
150U50-54 1-1/2" (38mm) 54mils (16ga.)
075U50-54 3/4" (19.1mm) 54mils (16ga.)
As required by design
Furring Channel:
Furring existing walls and suspended ceiling applications
Furring Channel Size:
087F125-33 7/8" (22mm) Furring Channel 33mils (20ga)
087F125-43 7/8" (22mm) Furring Channel 43mils (18ga)
087F125-54 7/8" (22mm) Furring Channel 54mils (16ga)
150F125-33 1-1/2" (38mm) Furring Channel 33mils (20ga)
150F125-43 1-1/2" (38mm) Furring Channel 43mils (18ga)
150F125-54 1-1/2" (38mm) Furring Channel 54mils (16ga)
As required by design
Framing Accessories:
Accessories required in this project
Flat Strapping for X-Bracing
Flat Strapping and bridging for lateral bracing
Gusset Plates
Fasteners: Self-drilling, self-tapping screws
Touch-Up Paint
MATERIALS
Steel: Galvanized Steel meeting or exceeding the requirements of ASTM A 1003.
Galvanized Coating:
Galvanized G60 coating minimum *most common
Galvanized G90 coating minimum *use if additional protective coating is required for the project.
- G90 is a special order product and should be specified in severely corrosive environments.
2. When you are finished making selections:
Generate Spec:
Word
WP
or
RTF