1. Configure Dietrich Metal Framing - COLD-FORMED METAL FRAMING:

Components

Studs: Cold formed galvanized steel C-studs; Dietrich Big "D" Steel C-Studs:

Size: SELECT SIZE------------1-3/8 in (35 mm) flange width, 3/8 in (9.5 mm) returns, & web depth as indicated on drawings; Series CWN1-5/8 in (41 mm) flange width, 1/2 in (12.7 mm) returns, & web depth as indicated on drawings; Series CSJ2 in (51 mm) flange width, 5/8 in (15.9 mm) returns, & web depth as indicated on drawings; Series CSW2-1/2 in (64 mm) flange width, 5/8 in (15.9 mm) returns, & web depth as indicated on drawings; Series CSE3 in (76 mm) flange width, 1 in (25.4 mm) returns, & web depth as indicated on drawings; Series CSSAs indicated on drawings___________(To Fill In)

Minimum Yield Strength: SELECT MINIMUM YIELD STRENGTH------------33 ksi (227 MPa) (for 20 through 12 gauges only)50 ksi (345 MPa) (optional for 16 gauge and heavier)As required for design

Minimum Delivered Thickness: SELECT MINIMUM DELIVERED THICKNESS------------20 gauge, 0.0329 inch (0.84 mm)18 gauge, 0.0428 inch (1.09 mm)16 gauge, 0.0538 inch (1.37 mm)14 gauge, 0.0677 inch (1.72 mm)12 gauge, 0.0966 inch (2.45 mm)

Runner Track: Cold formed galvanized steel sheet; Dietrich Big "D" Structural Runner Track:

Designation: SELECT DESIGNATION------------TSB Standard Leg 1 1/4 inches (32 mm) highEqual LegUnequal LegCustom size up to 3 inches (76.2 mm) highSlip Track (SLP-TRK)

Minimum Yield Strength: SELECT MINIMUM YIELD STRENGTH------------33 ksi (227 MPa) (for 20 through 12 gauges only)50 ksi (345 MPa) (for custom order only)As required for design

Sliptrack Systems - Slotted Deflection Track

Thickness: SELECT THICKNESS------------14 gage (1.81 mm)16 gage (1.44 mm)18 gage (1.14 mm)25 gage (0.48 mm)

Minimum Yield Strength: SELECT MINIMUM YIELD STRENGTH------------33 k.s.i. in 18 gauge and lighter50 k.s.i. in 16 gauge and heavier

Deflection Clips

Slide Clips: Minimum Delivered Thickness: 14gauge, 0.0677 inch (1.72 mm)

Slide Clips: Minimum Delivered Thickness: 12 gauge, 0.0966 inch (2.45 mm)

Fast Top Clip: Minimum Delivered Thickness: 14 gauge, 0.0677 inch (1.72 mm)

Fast Strut Clip: Minimum Delivered Thickness: 14 gauge, 0.0677 inch (1.72 mm)

Fast ClipSlide Clip: Minimum Delivered Thickness: 14 gauge, 0.0677 inch (1.72 mm)

QuickClip: Minimum Delivered Thickness: 10 gauge, 0.1180 inch (3 mm)

Clip Angles (Support Clips) EasyClip Series:

Minimum Delivered Thickness: SELECT MINIMUM DELIVERED THICKNESS------------16 gauge 0.0538 inch (1.37 mm)14 gauge, 0.0677 inch (1.72 mm)12 gauge, 0.0966 inch (2.45 mm)

EasyClip A Series: SELECT SIZE------------3 by 3 by 3 inches (76.2 by 76.2 by 76.2 mm)3 by 3 by 6 inches (76.2 by 76.2 by 152 mm)

EasyClip U Series: SELECT SIZE------------1-1/2 by 1-1/2 by 3-3/8 inches (38.1 by 38.1 by 85.7 mm)1-1/2 by 1-1/2 by 5-3/4 inches (38.1 by 38.1 by 146 mm)1-1/2 by 1-1/2 by 7-3/4 inches (38.1 by 38.1 by 197 mm)1-1/2 by 1-1/2 by 9-3/4 inches (38.1 by 38.1 by 248 mm)

EasyClip B Series: SELECT SIZE------------1-1/2 by 1-1/2 by 3 inches (38.1 by 38.1 by 76.2 mm)1-1/2 by 1-1/2 by 5-1/4 inches (38.1 by 38.1 by 133 mm)1-1/2 by 1-1/2 by 7-1/4 inches (38.1 by 38.1 by 184 mm)1-1/2 by 1-1/2 by 9-1/4 inches (38.1 by 38.1 by 235 mm)

EasyClip X Series: SELECT SIZE------------2 by 2 by 3-3/8 inches (50.8 by 50.8 by 85.7 mm)2 by 2 by 5-3/4 inches (50.8 by 50.8 by 146.0 mm)2 by 2 by 7-3/4 inches (50.8 by 50.8 by 196.8 mm)2 by 2 by 9-3/4 inches (50.8 by 50.8 by 247.6 mm)

EasyClip S Series: SELECT SIZE------------1-1/2 by 1-1/2 by 3 inches (38.1 by 38.1 by 76.2 mm)1-1/2 by 1-1/2 by 5 inches (38.1 by 38.1 by 127 mm)1-1/2 by 1-1/2 by 7 inches (38.1 by 38.1 by 178 mm)1-1/2 by 1-1/2 by 9 inches (38.1 by 38.1 by 229 mm)1-1/2 by 1-1/2 by 11 inches (38.1 by 38.1 by 279 mm)

EasyClip E Series: SELECT SIZE------------4 by 1-1/2 by 3 inches (101 by 38.1 by 76.2 mm)4 by 1-1/2 by 5 inches (101 by 38.1 by 127 mm)4 by 1-1/2 by 7 inches (101 by 38.1 by 178 mm)4 by 1-1/2 by 9 inches (101 by 38.1 by 229 mm)4 by 1-1/2 by 11 inches (101 by 38.1 by 279 mm)

U-Channel:

Size: SELECT SIZE------------3/4 inches (19.1 mm)1-1/2 inches (38 mm)2 inches (51 mm)

Note: The Spazzer 5400 bridging and spacer bar uses shear to bridge steel studs and is used as an alternative to U-channel and clip angle attachments

Bridging/Spacer Bar: Dietrich TradeReady Spazzer 5400 Bridging and Bracing Bar

Web Stiffeners:

Floor Joists: Cold formed Galvanized Steel C-Joist, Dietrich TradeReady Floor System:

Size: SELECT SIZE------------7-1/4 inches (184 mm) deep, with 1-3/4 inches (45 mm) flange, and 4-1/4 by 7 inches (108 by 178 mm) oval holes8 inches (203 mm) deep, with 1-3/4 inches (51 mm) flange, and 4-1/4 by 7 inches (108 by 178 mm) round holes9-1/4 inches (235 mm) deep, with 1-3/4 inches (45 mm) flange, and 6-1/4 by 9 inches (159 by 229 mm) oval holes10 inches (254 mm) deep, with 2 inches (51 mm) flange and 6-1/4 by 9 inches (159 by 229 mm) oval holes11-1/4 inches (286 mm) deep, with 1-3/4 inches (45 mm) flange, and 8 inches (203 mm) diameter round holes12 inches (305 mm) deep, with 2 inches (51 mm) flange, and 8 inches (203 mm) diameter round holes14 inches (356 mm) deep, with 2 inches (51 mm) flange, and 10 inches (254 mm) diameter round holes

Load-Bearing Headers (Cold-formed galvanized one-piece):

Dietrich TradeReady Load-Bearing Header: SELECT SIZE------------3-7/8 inches (98 mm) wide with 8 inch (203 mm) legs3-7/8 inches (98 mm) wide with 12 inch (305 mm) legs6-1/4 inches (159 mm) wide with 8 inch (203 mm) legs6-1/4 inches (159 mm) wide with 12 inch (305 mm) legs

Dietrich L-Header: SELECT SIZE------------1-1/2 in by 6 in, manufactured in 18 gauge (0.0428), 16 gage (0.0538) & 14 gauge (0.0677)1-1/2 in by 8 in, manufactured in 18 gauge (0.0428), 16 gauge (0.0538) & 14 gauge (0.0677)1-1/2 in by 10 in, manufactured in 18 gauge (0.0428), 16 gauge (0.0538) & 14 gauge (0.0677)

Framing Component Accessories:

Flat Strapping

Angles, Plates, Sheets

Custom Brake-Formed Shapes

Fasteners:Self-drilling, self-tapping screws; Steel, complying with ASTM C1513; Galvanized coating, plated or oil-phosphate coated complying with ASTM B 633 as needed for required corrosion resistance

Touch-Up Paint: Zinc rich, containing 95-percent metallic zinc

Materials

Note: Select G60 coating weight for typical structural applications. Select G90 coating weight where additional protective coating is required for the project.

Note that G90 is a special order and may result in additional cost and extended delivery times and should be specified in severely corrosive environments.

Galvanized Coating: SELECT COATING------------G60 coating weight minimum, complying with ASTM C 955G90 coating weight minimum, complying with ASTM C 955

2. When you are finished making selections:

Generate Spec: Word     WP   or   RTF