 | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
 | | Studs: Cold formed galvanized steel C-studs; by Dietrich Metal Framing: |
| | | Size: |
| | | Minimum Yield Strength: |
| | | Minimum Delivered Thickness: |
| | Runner Track: Cold formed galvanized steel sheet: |
| | | Designation: |
| | | Minimum Yield Strength: |
| | SLP-TRK Systems - Slotted Deflection Track by Brady Innovations: |
| | | Thickness: |
| | | Minimum Yield Strength: |
| | Deflection Clips |
| | | Slide Clips: Minimum Delivered Thickness: 14gauge, 0.0677 inch (1.72 mm) |
| | | Slide Clips: Minimum Delivered Thickness: 12 gauge, 0.0966 inch (2.45 mm) |
| | | Fast Top Clip: Minimum Delivered Thickness: 14 gauge, 0.0677 inch (1.72 mm) |
| | | Fast Strut Clip: Minimum Delivered Thickness: 14 gauge, 0.0677 inch (1.72 mm) |
| | | Fast ClipSlide Clip: Minimum Delivered Thickness: 14 gauge, 0.0677 inch (1.72 mm) |
| | | QuickClip: Minimum Delivered Thickness: 10 gauge, 0.1180 inch (3 mm) |
| | Clip Angles (Support Clips) EasyClip Series: |
| | | Minimum Delivered Thickness: |
| | | EasyClip A Series: |
| | | EasyClip U Series: |
| | | EasyClip B Series: |
| | | EasyClip X Series: |
| | | EasyClip S Series: |
| | | EasyClip E Series: |
| | U-Channel: |
| | | Size: |
| | Note: The Spazzer 5400 bridging and spacer bar uses shear to bridge steel studs and is used
as an alternative to U-channel and clip angle attachments |
| | Bridging/Spacer Bar: Dietrich TradeReady Spazzer 5400 Bridging and Spacing Bar |
| | Web Stiffeners: |
| | Floor Joists: Cold formed Galvanized Steel C-Joist, Dietrich TradeReady Floor System: |
| | | Size: |
| | Load-Bearing Headers (Cold-formed galvanized one-piece): |
| | | Dietrich Metal Framing Heavy Duty Stud (HDS) and Header Bracket (HDSC): |
| | | Dietrich TradeReady Load-Bearing Header: |
| | | Brady Innovations ProX Header: |
| | Framing Component Accessories: |
| | | Flat Strapping |
| | | Angles, Plates, Sheets |
| | | Custom Brake-Formed Shapes |
| | Fasteners:Self-drilling, self-tapping screws; Steel, complying with ASTM C1513; Galvanized coating, plated or
oil-phosphate coated complying with ASTM B 633 as needed for required corrosion resistance |
| | Touch-Up Paint: Zinc rich, containing 95-percent metallic zinc |