Dietrich Metal Framing, Inc. -

START HERE
The SpecWizard concept is simple as 1, 2, 3:
        1. Select products on the right
                by checking check boxes
        2. Configure the products
                by selecting options
        3. Generate Spec
                in Word, WP or RTF



Dietrich Metal Framing, Inc.; load-bearing metal studs, joists, runner track and other components for walls, floors and roofs .
.
This section is based on the products of Dietrich Metal Framing, Inc., which is located at:
200 Old Wilson Bridge Road
Columbus, OH 43085
Tel: (614) 840-4350
Fax: (614) 840-4351 OH 43085

[ Click Here ] for additional information.
.
Dietrich Metal Framing, a Worthington Industries Company, is the leading manufacturer of light-gauge framing and finishing products for commercial and residential construction. Dietrich Metal Framing provides a wide selection of light-gauge framing and finishing products including drywall and structural framing, floor joists, metal lath, fire-rated assemblies, numerous deflection systems and an extensive line of metal, vinyl, veneer, paper-faced, plaster and stucco beads and trims. Dietrich Metal Framing companies and divisions - include Dietrich Design Group, Vinyl Corp., Dietrich Metal Framing Canada; operates manufacturing and service locations throughout North America and Canada.

Dietrich Metal Framing also provides total light-gauge design services through its design services group, Dietrich Design Group. DDG is the largest group of design engineers devoted solely to light-gauge steel framing design. They can provide shop drawings, technical recommendations, and member sizing, DDG is licensed in all 50 states and now operates in three locations; Hammond, IN; McDonough, GA and Carlsbad, CA.

Research Building Product info:
[ ARCAT.com ]

[ Comments? ]
[ What would make SpecWizard better? ]