1. Configure Garlock Equipment Company - PORTABLE RAILING SYSTEM:
Railing Sections
Rails: 1-5/8 inch (41 mm) O.D. by 0.065 inch (2.7 mm) wall HREW tubing.
Note: Custom lengths are available, contact Garlock for additional information.
Length:
Finish:
Gate System
Rails: 1-5/8 inch (41 mm) O.D. by 0.120 inch (2.7 mm) wall HREW tubing.
Note: Custom lengths are available, contact Garlock for additional information.
Length:
Finish:
Base Plates
Material: cast iron class 20B.
Size: 1 foot 9-1/2 inches by 1 foot 9-1/2 inches (546 by 546 mm).
Finish:
Four adhesive pads with directional non-skid resistant ridge pattern and minimum 28 sq. inches (180 sq.cm) of substrate contact each.
Securing Pins.
Material: 1038H cold rolled steel.
Lock: Klick-pin attached to chain to lock into pin shaft.
Finish: Electroplate and zinc dichromate dipped.
Service Cart
Cart shall attach to the Garlock Little Giant 4 Wheel Trailer. Little Giant Trailer shall have built-in wheel brakes.
Cart shall be able to carry eight base plates and seven rail sections.
Cart shall have a manual winch to raise and lower base plates.
Cart shall be able to carry base transport, eight short Speed Boards, and six long Speed Boards and a cabinet for holding the securing pins.
Speed Boards
Material: 4 inches (102 mm) wide, zinc plated steel.
Attachment: Boards shall telescope to fit into toe board brackets on base plate and pinned to the base toe board brackets.
CageGuard Skylight Protector
Material: 1-5/8 inch (41 mm) O.D. by 0.065 inch (2.7 mm) wall HREW tubing.
Size:
Height:
Adjustable Length Stand-Offs
Drop-On Stack Plates, 15 lb:
Cast Iron Base Plates Supports
Finish:
 2. When you are finished making selections:
  Generate Spec: Word     WP   or   RTF