Tuttle Railing Systems ARCAT SpecWizard

1. Configure Tuttle Railing Systems - HANDRAILS AND RAILINGS:

COMMERCIAL RAILINGS

Welded Stainless Steel Railing - TABCO 4000

Pipe Material:

Pipe Size:

Finish:

Fittings and Flanges: Cast 300 alloy stainless steel

Fasteners: Stainless steel

Fabrication:

Installation: Mechanical field joints

Welded Aluminum Railing - TABCO 3000

Tube Material: Type 6063, 6005 or 6061 aluminum alloy

Pipe Size:

Finish:

Fittings and Flanges: Type 6063 or 6061 aluminum alloy. Cast # 214 aluminum alloy

Fasteners: Stainless steel

Fabrication: Continuous smooth welded joints. Horizontal rail design

Installation: Mechanical field joints

Custom Glass Railing - TABCO 6000

Tube or Pipe Material: Type 6063 or 6005 aluminum alloy, schedule 40

Plate Material: Type 6063 aluminum alloy

Pipe Size:

Infill:

Glass: Polished three edges in color and opacity as indicated on drawings

Top Rrail:

Finish:

Stainless Steel and Glass Railing - SIMO RAIL

Top Rail Material and Profile:

Plate Material:

Infill:

Finish:

Fasteners: Stainless steel

Brass / Bronze Railings

Stainless Steel Cable Rail System - Sea Rail

Top Rail Material: Type 316 Schedule 40 extruded stainless steel pipe

Plate Material: 316 SS plate. Water jet cut to profile indicated. Full penetration welds filled and ground smooth

Finish:

Intermediate Cable:

Intermediate Rail:

Cable Fitting: Threaded swaged stainless steel. Invisiware by UltraTec or similar

Rod: Stainless steel cold head fittings

Grommets, bushings and washers: Synthetic material

Fasteners: Stainless steel

Clip Rail System

Pipe and Tube Material:

Pipe or Tube Size:

Finish:

Square Clips: Type 304 two piece glass clips with neoprene grips

Square Clips: Type 316 two piece glass clips with neoprene grips

Half Oval Clips: Type 304 two piece glass clips with neoprene grips

Half Oval Clips: Type 316 two piece glass clips with neoprene grips

Infill:

Fasteners: Stainless steel

INDUSTRIAL WELDED RAILINGS

INDUSTRIAL MECHANICAL ALUMINUM HANDRAIL SYSTEMS

Aluminum Railing - TABCO 1000

Handrails shall be of mechanical construction unless noted otherwise

Rails shall be 1-1/2 inch (38 mm) Schedule 40, 6063-T6 alloy aluminum pipe

Posts shall be 2-1/4 inches by 1-1/4 inches (32 mm by 57 mm) 6063-T6 alloy aluminum tube

Fasteners shall be stainless steel

Kick plate shall be 1/8 in by 3/4 in by 4 in (3 mm by 19 mm by 102 mm) high aluminum channel or 1/4 in by 4 in (6 mm by 102 mm)
high bar

Finish shall be M10C22A41

Handrails shall be shipped sub-assembled

Set Screw System - TABCO 8000

Pipe Material: Type 6005, 6063 or 6061 alloy, schedule 40 or schedule 80

Pipe Size: 1-1/2 inch (37 mm) diameter

Finish:

Fasteners: Type 304 stainless steel

Fabrication: Horizontal rail design. Two line to six line horizontal rails as indicated or required to meet code

Provide schedule 80 pipe material for posts where indicated or required to resist loading

Post spacing - 6 feet (1.8 m) maximum

Shop fabricated sections shall be assembled using mechanical construction with tang (expansion type) connectors

Provide toe boards where indicated or required to meet code

Installation: Fabricated sections shall be assembled using mechanical construction with expansion and tang (expansion type) connectors

Pop Riveted System - TABCO 2500

Pipe Material: Type 6005, 6063 or 6061 alloy, schedule 40 or schedule 80

Pipe Size: 1-1/2 inch (37 mm) diameter

Finish:

Fittings and Flanges: Type 6063 or 6061 alloy. Cast # 214 aluminum alloy

Fasteners: Stainless steel

Post spacing - 6 feet (1.8 m) maximum

Provide toe boards where indicated or required to meet code

Installation:

Machine Screw System - TABCO 9000

Pipe Material: Type 6005, 6063 or 6061 alloy, schedule 40 or schedule 80

Pipe Size: 1-1/2 inches (38 mm)

Finish:

Fasteners: Stainless steel

Fabrication: Horizontal rail design. Two line to six line horizontal rails as indicated or required to meet code

Provide schedule 80 pipe material where indicated or required to resist loading

Post spacing - 6 feet (1.8 m) maximum

Shop fabricated line and intermediate posts shall be assembled with fittings and mounting plates, capped and cut to length.

Provide toe boards where indicated or required to meet code

Field Installation: Rails shall be cut to length and attached to line and end posts with machine screws

MATERIALS

2. When you are finished making selections:

Generate Spec:

Word

WP or

RTF