1. Configure Epro Services HIGH PERFORMANCE WATERPROOFING:

WATERPROOFING SYSTEMS

NOTE: Select the systems below that apply to the project. If more than 1 system with the same name is required,

edit the names to indicate where each is to be used.

A. Blindside/Lagging Walls:

First Course: High performance fluid-applied membrane waterproofing.

Second Course: Polyethylene drainage panel applied directly to lagging surface.

Third Course: High performance fluid-applied membrane waterproofing.

Fourth Course: Shotcrete, as specified in Section 03371.

B. Blindside/Shotcrete and Soil Nails:

First Course: Shotcrete, with weepholes extending into drainage panel; as specified in Section 03371.

Second Course: Polyethylene drainage panel applied directly to Shotcrete surface.

Third Course: High performance fluid-applied membrane waterproofing.

Fourth Course: Shotcrete, as specified in Section 03371.

C. Blindside/Soil Nails and Earth:

First Course: Polyethylene drainage panel applied directly to soil surface.

Second Course: High performance fluid-applied membrane waterproofing.

Third Course: Shotcrete, as specified in Section 03371.

D. Blindside/Sheet Piling:

First Course: Sheet Piling.

Second Course: Polyethylene drainage panel applied directly to Sheet Piling surface.

Third Course: High performance fluid-applied membrane waterproofing.

Fourth Course: Shotcrete, as specified in Section 03371.

E. Underground Structures, Including Tunnels - Top/Outside Waterproofing:

First Course: High performance fluid-applied membrane waterproofing.

Second Course: Polyethylene geomembrane, 10 mils thickness.

Third Course: Polyethylene drainage panel.

F. Foundation Wall Assemblies:

Please Select Only 1 of the Following Foundation Walls.

Foundation Walls NOT More Than 12 ft (3660 mm) Below Grade:

First Course: Standard duty fluid-applied membrane waterproofing

Second Course: Polyethylene drainage panel.

Foundation Walls:

First Course: High performance fluid-applied membrane waterproofing.

Second Course: Polyethylene geomembrane.

Third Course for Vertical Structures: SELECT HEIGHT------30 ft high or less - Polyethylene drainage panelOver 30 ft high - Standard duty polypropylene drainage panel

Foundation Walls:

First Course: High performance fluid-applied membrane waterproofing.

Second Course: Polyethylene geomembrane.

Third Course: Rigid insulation, as specified in Section 07212.

Fourth Course for Vertical Structures: SELECT HEIGHT------30 ft high or less - Polyethylene drainage panelOver 30 ft high - Standard duty polypropylene drainage panel

G. Planters - Concrete and Concrete Masonry:

First Course: High performance fluid-applied membrane waterproofing.

Second Course:  SELECT THICKNESS-------Polyethylene Geomembrane, minimum 10 mils (0.25 mmPolyethylene Geomembrane, minimum 15 mils (0.38 mm)

Third Course:  SELECT COURSE-------Polyethylene drainage panelSand/gravel drainage course, with subdrainage pipingPolyethylene drainage panel covered with sand/gravel drainage course, subdrainage piping

Finish Course: Planting soil, as specified elsewhere

H. Slab-On-Grade - Waterproofing Under Slab:

Subbase: Sand over rough grade; as specified in Section 02316.

First Course: Reinforcing/Barrier sheet, fabric side down.

Second Course: High performance fluid-applied membrane waterproofing.

Third Course: Reinforcing/Barrier sheet, fabric side up.

Finish Course: Concrete Slab as indicated in drawing.

I. Slab-On-Grade - Methane Barrier/Waterproofing Under Slab:

Subbase: Sand over rough grade; as specified in Section 02316.

First Course: Polyethylene geomembrane, 10 mils thickness.

Second Course: High performance fluid-applied membrane waterproofing.

Third Course: Polyethylene geomembrane, 10 mils thickness.

J. Slab-On-Grade - Mud Slab Construction:

First Course on Top of Mud Slab: High performance fluid-applied membrane waterproofing.

Second Course: Reinforcing/Barrier sheet, fabric side up.

Finish Course: Concrete slab as indicated on drawings.

K. Concrete Plaza Decks - For Pervious Paving:

First Course: High performance fluid-applied membrane waterproofing.

Second Course: Polyethylene geomembrane, minimum 15 mils thickness.

Third Course:  SELECT COURSE---------Polyethylene drainage panelPolypropylene drainage panel (higher compressive strength)

Finish Course: Paving as specified elsewhere.

L. Concrete Decks:

Bonded Finish:  (For Tile or Terrazzo That is to be Bonded to Deck)

First Course: High performance fluid-applied membrane waterproofing.

Second Course: Reinforcing/barrier sheet, fabric side up.

Finish Course: As specified elsewhere.

Unbonded Finish:  (For Cleavage Membrane)

First Course: High performance fluid-applied membrane waterproofing.

Second Course: Polyethylene geomembrane, minimum 15 mils thickness.

Finish Course: As specified elsewhere.

2. When you are finished making selections:

Generate Spec: Word     WP   or   RTF