1. For indicating different thicknesses for the same material in different locations:

Applications MUST SELECT AN OPTION--------------------------------------To be indicated on drawingsTo be indicated in specificationsNot applicable

2. Select and Configure Materials:

Rigid board glass fiber thermal insulation:

SELECT DENSITY---------------2.25 lb/cu ft (36 kg/cu m) minimum3.0 lb/cu ft (48 kg/cu m) minimum4.25 lb/cu ft (68 kg/cu m) minimum6.0 lb/cu ft (96 kg/cu m) minimum SELECT FACING--------------------------------------None, unfacedFoil-scrim-kraft (FSK) (not in 4.25 pcf)All service jacket (ASJ) (not in 2.25 pcf)

Select THICKNESS AND R-VALUE (if more than one, indicate where used)

1-inch (25 mm): R-value of 4.3 1-1/2-inch (38 mm): R-value of 6.5 2 inch (51 mm): R-value of 8.7 2-1/2inch (64 mm): R-value of 10.9 3 inch (76 mm): R-value of 13.0 3-1/2inch (89 mm): R-value of 15.2 4 inch (102 mm): R-value of 17.4

Foil-faced glass fiber thermal insulation - batt type:

SELECT FACING--------------------------------------Foil-scrim-kraft (FSK-25) (can leave exposed)Foil vapor retarder

Select THICKNESS (if more than one, indicate where used)

3-1/2 inch (89 mm): R-value of 11 3-1/2 inch (89 mm): R-value of 13 6-1/4 inch (159 mm): R-value of 19 10 inch (254 mm): R-value of 30 12 inch (305 mm): R-value of 38 (only with FSK-25 facing)

Kraft faced glass fiber thermal insulation - batt type:

Select THICKNESS AND R-VALUE (if more than one, indicate where used)

3-1/2 inch (89 mm): R-value of 11 3-1/2 inch (89 mm): R-value of 13 (high density) 3-1/2 inch (89 mm): R-value of 15 (high density) 5-1/2 inch (140 mm): R-value of 21 (high density) 6-1/4 inch (159 mm): R-value of 19 6-1/2 inch (165 mm): R-value of 22 8-1/4 inch (210 mm): R-value of 30 (high density) 9 inch (229 mm): R-value of 26 10 inch (254 mm): R-value of 30 10-1/4 inch (261 mm): R-value of 38 12 inch (305 mm): R-value of 38

Unfaced glass fiber thermal insulation - batt type:

Select THICKNESS AND R-VALUE (if more than one, indicate where used) 3/4 inch (19 mm): R-value of 3 - for use between furring strips on solid walls 1-1/2 inch (38 mm): R-value of 5- for use between furring strips on solid walls 3-1/2 inch (89 mm): R-value of 11 3-1/2 inch (89 mm): R-value of 13 (high density) 3-1/2 inch (89 mm): R-value of 15 (high density) 5-1/2 inch (140 mm): R-value of 21 (high density) 6-1/4 inch (159 mm): R-value of 19 6-1/2 inch (165 mm): R-value of 22 8-1/4 inch (210 mm): R-value of 30 (high density) 8-1/2 inch (216 mm): R-value of 25 9 inch (229 mm): R-value of 26 10 inch (254 mm): R-value of 30 10-1/4 inch (261 mm): R-value of 38 (high density) 12 inch (305 mm): R-value of 38

Extra wide glass fiber thermal insulation for surface application - batt type:

SELECT WIDTH--------------------------------------48 inches (1219 mm)72 inches (1829) SELECT FACING---------------Foil vapor retarderWhite vinyl retarder

Select THICKNESS AND R-VALUE (if more than one, indicate where used) 3-1/2 inch (89 mm): R-value of 11 6 inch (159 mm): R-value of 19

Accoustical glass-fiber insulation: batt type SELECT FACING--------------------------------------None, unfaced (may be left exposed)Kraft paper

Black accoustical glass fiber insulation: batt type SELECT THICKNESS AND DENSITY--------------------------------------1/2 inch (13 mm), 1.5 lb/cu ft (24 kg/cu m) density1 inch (25 mm), 1.0 lb/cu ft (16 kg/cu m) density1 inch (25 mm), 1.5 lb/cu ft (24 kg/cu m) density1 inch (25 mm), 2.0 lb/cu ft (32 kg/cu m) density1-1/2 inch (38 mm), 1.0 lb/cu ft (16 kg/cu m) density1-1/2 inch (38 mm), 1.5 lb/cu ft (24 kg/cu m) density2 inch (51 mm), 1.0 lb/cu ft (16 kg/cu m) density2 inch (51 mm), 1.5 lb/cu ft (24 kg/cu m) density

Black accoustical glass fiber insulation: board type SELECT THICKNESS AND DENSITY--------------------------------------1 inch (25 mm), 3.0 lb/cu ft (48 kg/cu m) density1-1/2 inch (38 mm), 3.0 lb/cu ft (48 kg/cu m) density2 inch (51 mm), 2.25 lb/cu ft (36 kg/cu m) density2 inch (51 mm), 3.0 lb/cu ft (48kg/cu m) density

Blown insulation

3. Installation - Batts, blankets, and boards:

Surface application SELECT SURFACE APPLICATION--------------------------------------Apply with anchorsapply insulation with adhesive

Between metal studs, rafters and joists SELECT FACED INSULATION--------------------------------------Faced insulationNo faced insulation

Between wood studs, rafters and joists SELECT FACED INSULATION--------------------------------------Staple attachment flanges to face or sideFriction fit between framing members

4. When you are finished makeing selections:

Generate Spec: Word     WP   or   RTF