1. Configure Temple-Inland Forest Products Corp. - Roof and Deck Insulation:

Wood Fiber Roofing Substrate

Roofing substrate shall meet FM Global approval for roof insulation for I-60 and I-90 wind uplift rated systems.

Roofing substrate shall meet Underwriters Laboratories' Classified product for built-up roof covering materials.

MATERIALS

Note: Typical applications are asphalt and coal tar BUR, Modified Bitumen, ballasted and mechanically attached EPDM.

Fully Coated Fiber Base HD by Temple-Inland

Note: Typical applications are asphalt and coal tar BUR, Modified Bitumen, ballasted, mechanically attached and fully adhered EPDM.  Ballasted, mechanically attached and fully adhered CPE/CSPE, PIB and PVC.

Coated One Side Fiber Base HD by Temple-Inland

Note: Economy product. Typical applications are asphalt and coal tar BUR, Modified Bitumen, ballasted, mechanically attached and fully adhered EPDM. Ballasted, mechanically attached and fully adhered CPE/CSPE , PIB and PVC.

Uncoated Fiber Base HD by Temple-Inland

Thickness

1/2 inch (13 mm) with a thermal resistance R-Value, (Km2/W): 1.32

25/32 inch (21 mm) with a thermal resistance R-Value, (Km2/W): 2.06

As indicated on drawings

INSTALLATION OF FASTENERS

Fasten substrate board to top flanges of steel deck according to recommendations in FM Global's "Approval Guide" for specified Windstorm Resistance Classification.

Fasten substrate board to top flanges of steel deck to resist uplift pressure at corners, perimeter, and field of roof according toroofing system manufacturer's written instructions.

2. When you are finished making selections:

Generate Spec: Word     WP   or   RTF