1. Configure HUNTER PANELS Nailbase Insulation:

Panel Construction

Panels shall consist of a top layer of APA/TECO rated Oriented Strand Board (OSB) and a bottom layer

of black fiber reinforced faced polyisocyanurate foam insulation

Polyisocyanurate foam insulation shall conform to ASTM C 1289, Type V with a compressive strength of:

Grade: SELECT GRADE-------20 psi (138 kPa) minimum25 psi (145 kPa) minimum

OSB Top layer substrate shall conform to PS2 and shall be as follows: SELECT TYPE-------Standard sheathing gradeFSC LEEDS certified

Thickness: SELECT THICKNESS-------7/16 inch (11.1 mm)5/8 inch (15.9 mm)

Edge detail: SELECT TYPE-------RoutedNon-routed

Panels shall consist of a top layer of APA exterior grade laminated off-line to black fiber reinforced

faced polyisocyanurate foam insulation

Polyisocyanurate foam insulation shall conform to ASTM C 1289, Type V with a compressive strength of:

SELECT GRADE-------20 psi (138 kPa) minimum25 psi (145 kPa) minimum

Plywood Top layer substrate shall conform to PS2 and shall be as follows: SELECT TYPE-------Standard CDX sheathing gradeFire-treatedFSC LEEDS certified

Thickness: SELECT THICKNESS-------5/8 inch (15.9 mm)3/4 inch (19.0 mm)

Edge Detail: SELECT TYPE-------RoutedNon-routed

Panel Type

H-Shield-NB panels 7/16 inch (11 mm) OSB shall be 47-1/2 inches by 95-1/2 inches (1207 mm by 2426 mm)

Thickness: SELECT THICKNESS-------1.5 inches (38 mm), R Value 6.60, flute spanability 4-3/8 inches (111.13 mm)2.0 inches (51 mm), R Value 9.60, flute spanability 4-3/8 inches (111.13 mm)2.5 inches (64 mm), R Value 12.70, flute spanability 4-3/8 inches (111.13 mm)3.0 inches (76 mm), R Value 15.90, flute spanability 4-3/8 inches (111.13 mm)3.5 inches (89 mm), R Value 19.10, flute spanability 4-3/8 inches (111.13 mm)3.7 inches (94 mm), R Value 20.40, flute spanability 4-3/8 inches (111.13 mm)3.8 inches (97 mm), R Value 21.00, flute spanability 4-3/8 inches (111.13 mm)4.0 inches (102 mm), R Value 22.30, flute spanability 4-3/8 inches (111.13 mm)4.5 inches (114 mm), R Value 25.6, flute spanability 4-3/8 inches (111.13 mm)5.0 inches (127 mm), R Value 28.7, flute spanability 4-3/8 inches (111.13 mm)

H-Shield-NB panels 5/8 inch (16 mm) OSB or plywood shall be 47-1/2 inches by 95-1/2 inches (1207 mm by 2426 mm)

Thickness: SELECT THICKNESS-------1.6 inches (41 mm), R Value 6.60, flute spanability 4-3/8 inches (111.13 mm)2.1 inches (53 mm), R Value 9.60, flute spanability 4-3/8 inches (111.13 mm)2.6 inches (66 mm), R Value 12.70, flute spanability 4-3/8 inches (111.13 mm)3.1 inches (79 mm), R Value 15.90, flute spanability 4-3/8 inches (111.13 mm)3.6 inches (91 mm), R Value 19.10, flute spanability 4-3/8 inches (111.13 mm)3.8 inches (96 mm), R Value 20.40, flute spanability 4-3/8 inches (111.13 mm)3.9 inches (99 mm), R Value 21.00, flute spanability 4-3/8 inches (111.13 mm)4.1 inches (104 mm), R Value 22.30, flute spanability 4-3/8 inches (111.13 mm)4.6 inches (117 mm), R Value 25.6, flute spanability 4-3/8 inches (111.13 mm)

H-Shield-NB panels 3/4 inch (19 mm) plywood shall be 47-1/2 inches by 95-1/2 inches (1207 mm by 2426 mm)

Thickness: SELECT THICKNESS-------1.7 inches (43 mm), R Value 6.60, flute spanability 4-3/8 inches (111.13 mm)2.2 inches (56 mm), R Value 9.60, flute spanability 4-3/8 inches (111.13 mm)2.7 inches (69 mm), R Value 12.70, flute spanability 4-3/8 inches (111.13 mm)3.2 inches (81 mm), R Value 15.90, flute spanability 4-3/8 inches (111.13 mm)3.7 inches (94 mm), R Value 19.10, flute spanability 4-3/8 inches (111.13 mm)3.9 inches (99 mm), R Value 20.00, flute spanability 4-3/8 inches (111.13 mm)4.0 inches (102 mm), R Value 21.00, flute spanability 4-3/8 inches (111.13 mm)4.2 inches (107 mm), R Value 22.30, flute spanability 4-3/8 inches (111.13 mm)4.7 inches (119 mm), R Value 25.6, flute spanability 4-3/8 inches (111.13 mm)

Panel Fastners

Substrate Fastners: SELECT TYPE-------Fastners shall be FM Approved Hunter Panel SIP/SD Panel Fastners for steel deck applicationsFastners shall be FM Approved Hunter Panel SIP/WD Panel Fastners for wood deck applications

2. When you are finished making selections:

Generate Spec: Word     WP   or   RTF