1. Configure POLYISOCYANURATE ROOF INSULATION - Insulation:

PRODUCTS:

Roof Board Insulation: Provide products that comply with the following:

ASTM standards specified

Factory Mutual (FM) approvals specified

Underwriters Laboratories 1nc. (UL) classifications specified

Florida Building Code Approval FL#1296

Miami Dade County, Florida Product Control No. 04-1018.01

Felt-Faced Foam Roof Insulation: Flat H-Shield

Blowing Agent: Zero ODP, 3rd generation

Fire Ratings:

UL 1256, No. 120 and 123

UL 790 (ASTM E 108), Class A

UL 263 (ASTM E 119)

FM 4450/4470, Class 1. Fire Rating

FM Approval:  SELECT TYPE----------------Wind Uplift Classification: 1-60Wind Uplift Classification: 1-90

Compressive Strength:  SELECT TYPE----------------20 pounds per square inch (138 kPa) Grade 225 pounds per square inch (172 kPa) Grade 3

R Value: Provide Insulation with LTTR (Long Term Thermal Resistance) in accordance with ASTM C 1289, Annex A1. Minimum thickness of panels shall be as follows:

Thickness 1.00 inch (25 mm), R Value 6.00, flute spanability 2 5/8 inches (67 mm)

Thickness 1.50 inch (38 mm), R Value 9.00, flute spanability 4-3/8 inches (111.13 mm)

Thickness 1.60 inch (41 mm), R Value 9.60, flute spanability 4-3/8 inches (111.13 mm)

Thickness 1.70 inch (43 mm), R Value 10.30, flute spanability 4-3/8 inches (111.13 mm)

Thickness 1.80 inch (46 mm), R Value 10.90, flute spanability 4-3/8 inches (111.13 mm)

Thickness 2.00 inch (51 mm), R Value 12.10, flute spanability 4-3/8 inches (111.13 mm)

Thickness 2.50 inch (64 mm), R Value 15.30, flute spanability 4-3/8 inches (111.13 mm)

Thickness 2.70 inch (69 mm), R Value 16.60, flute spanability 4-3/8 inches (111.13 mm)

Thickness 3.00 inch (76 mm), R Value 18.50, flute spanability 4-3/8 inches (111.13 mm)

Thickness 3.10 inch (79 mm), R Value 19.10, flute spanability 4-3/8 inches (111.13 mm)

Thickness 3.30 inch (84 mm), R Value 20.40, flute spanability 4-3/8 inches (111.13 mm)

Thickness 3.50 inch (89 mm), R Value 21.70, flute spanability 4-3/8 inches (111.13 mm)

Thickness 3.60 inch (91 mm), R Value 22.40, flute spanability 4-3/8 inches (111.13 mm)

Thickness 3.70 inch (94 mm), R Value 23.00, flute spanability 4-3/8 inches (111.13 mm)

Thickness 4.00 inch (102 mm), R Value 25.00, flute spanability 4-3/8 inches (111.13 mm)

Flat Foil-Faced Foam Roof Insulation: H-Shield-F

Blowing Agent: Zero ODP, 3rd generation

Fire Ratings:

UL 1256, No. 120 and 123

UL 790 (ASTM E 108), Class A

UL 263 (ASTM E 119)

FM 4450/4470, Class 1. Fire Rating

FM Approval:  SELECT TYPE----------------Wind Uplift Classification: 1-60Wind Uplift Classification: 1-90

Compressive Strength:  SELECT TYPE----------------20 pounds per square inch (138 kPa) Grade 225 pounds per square inch (172 kPa) Grade 3

R Value: Provide Insulation with LTTR (Long Term Thermal Resistance) in accordance with ASTM C 1289, Annex A1. Minimum thickness of panels shall be as follows:

Thickness 1.00 inch (25 mm), R Value 6.00, flute spanability 2 5/8 inches (67 mm)

Thickness 1.50 inch (38 mm), R Value 9.00, flute spanability 4-3/8 inches (111.13 mm)

Thickness 1.80 inch (46 mm), R Value 10.90, flute spanability 4-3/8 inches (111.13 mm)

Thickness 2.00 inch (51 mm), R Value 12.10, flute spanability 4-3/8 inches (111.13 mm)

Thickness 2.50 inch (64 mm), R Value 15.30, flute spanability 4-3/8 inches (111.13 mm)

Thickness 3.00 inch (76 mm), R Value 18.50, flute spanability 4-3/8 inches (111.13 mm)

Thickness 3.30 inch (84 mm), R Value 20.40, flute spanability 4-3/8 inches (111.13 mm)

Thickness 3.50 inch (89 mm), R Value 21.70, flute spanability 4-3/8 inches (111.13 mm)

Thickness 3.60 inch (91 mm), R Value 22.40, flute spanability 4-3/8 inches (111.13 mm)

Thickness 4.00 inch (102 mm), R Value 25.00, flute spanability 4-3/8 inches (111.13 mm)

Flat Foam Roof Insulation with Coated Glass Facers: Flat H-Shield-CG

Blowing Agent: Zero ODP, 3rd generation

Fire Ratings:

UL 1256, No. 120 and 123

UL 790 (ASTM E 108), Class A

UL 263 (ASTM E 119)

FM 4450/4470, Class 1. Fire Rating

FM Approval:  SELECT TYPE----------------Wind Uplift Classification: 1-60Wind Uplift Classification: 1-90

Compressive Strength:  SELECT TYPE----------------20 pounds per square inch (138 kPa)25 pounds per square inch (172 kPa)

Slope of tapered board:  SELECT SLOPE----------------1/16 inch (2 mm) per foot1/8 inch (3 mm) per foot3/16 inch (5 mm) per foot1/4 inch (6 mm) per foot1/2 inch (13 mm) per foot

Flat Foam Roof Insulation with Coated Glass Facer: Flat H-Shield-DWD

Blowing Agent: Zero ODP, 3rd generation

Fire Ratings:

UL 1256, No. 120 and 123

UL 790 (ASTM E 108):  SELECT CLASS----------------UL 790 (ASTM E 108), Class AUL 790 (ASTM E 108), Class BUL 790 (ASTM E 108), Class C

UL 263 (ASTM E 119)

Compressive Strength:  SELECT TYPE----------------20 pounds per square inch (138 kPa) Grade 225 pounds per square inch (172 kPa) Grade 3

R Value: Provide Insulation with LTTR (Long Term Thermal Resistance) in accordance with ASTM C 1289, Annex A1. Minimum thickness of panels shall be as follows:

Thickness 1.00 inch (25 mm), R Value 6.00, flute spanability 2 5/8 inches (67 mm)

Thickness 1.50 inch (38 mm), R Value 9.00, flute spanability 4-3/8 inches (111.13 mm)

Thickness 1.60 inch (41 mm), R Value 9.60, flute spanability 4-3/8 inches (111.13 mm)

Thickness 1.70 inch (43 mm), R Value 10.30, flute spanability 4-3/8 inches (111.13 mm)

Thickness 1.90 inch (48 mm), R Value 11.50, flute spanability 4-3/8 inches (111.13 mm)

Thickness 2.00 inch (51 mm), R Value 12.10, flute spanability 4-3/8 inches (111.13 mm)

Thickness 2.50 inch (64 mm), R Value 15.30, flute spanability 4-3/8 inches (111.13 mm)

Thickness 2.70 inch (69 mm), R Value 16.60, flute spanability 4-3/8 inches (111.13 mm)

Thickness 3.00 inch (76 mm), R Value 18.50, flute spanability 4-3/8 inches (111.13 mm)

Thickness 3.10 inch (79 mm), R Value 19.10, flute spanability 4-3/8 inches (111.13 mm)

Thickness 3.30 inch (84 mm), R Value 20.40, flute spanability 4-3/8 inches (111.13 mm)

Thickness 3.50 inch (89 mm), R Value 21.70, flute spanability 4-3/8 inches (111.13 mm)

Thickness 3.60 inch (91 mm), R Value 22.40, flute spanability 4-3/8 inches (111.13 mm)

Thickness 4.00 inch (102 mm), R Value 25.00, flute spanability 4-3/8 inches (111.13 mm)

Foam Roof Insulation Bonded to Wood Fiberboard: H-Shield-WF

Blowing Agent: Zero ODP, 3rd generation

Fire Ratings:

UL 1256, No. 120 and 123

UL 790 (ASTM E 108), Class A

UL 263 (ASTM E 119)

FM 4450/4470, Class 1. Fire Rating

FM Approval:  SELECT TYPE----------------Wind Uplift Classification: 1-60Wind Uplift Classification: 1-90

R Value: Provide Insulation with LTTR (Long Term Thermal Resistance) in accordance with ASTM C 1289, Annex A1. Minimum thickness of panels shall be as follows:

Thickness 1.50 inch (38 mm), R Value 7.36, flute spanability 4-3/8 inches (111.13 mm)

Thickness 2.00 inch (51 mm), R Value 10.36, flute spanability 4-3/8 inches (111.13 mm)

Thickness 2.50 inch (64 mm), R Value 13.46, flute spanability 4-3/8 inches (111.13 mm)

Thickness 3.00 inch (76 mm), R Value 16.66, flute spanability 4-3/8 inches (111.13 mm)

Thickness 3.10 inch (79 mm), R Value 17.26, flute spanability 4-3/8 inches (111.13 mm)

Thickness 3.40 inch (86 mm), R Value 19.26, flute spanability 4-3/8 inches (111.13 mm)

Thickness 3.50 inch (89 mm), R Value 19.86, flute spanability 4-3/8 inches (111.13 mm)

Thickness 4.00 inch (102 mm), R Value 23.06, flute spanability 4-3/8 inches (111.13 mm)

Thickness 4.50 inch (113 mm), R Value 26.36, flute spanability 4-3/8 inches (111.13 mm)

Tapered Foam Roof Insulation with Fiber-Reinforced Facers: Tapered H-Shield

Blowing Agent: Zero ODP, 3rd generation

Fire Ratings:

UL 1256, No. 120 and 123

UL 790 (ASTM E 108), Class A

UL 263 (ASTM E 119)

FM 4450/4470, Class 1. Fire Rating

FM Approval:  SELECT TYPE----------------Wind Uplift Classification: 1-60Wind Uplift Classification: 1-90

Compressive Strength:  SELECT TYPE----------------20 pounds per square inch (138 kPa) Grade 225 pounds per square inch (172 kPa) Grade 3

Slope of tapered board:  SELECT SLOPE----------------1/16 inch (2 mm) per foot1/8 inch (3 mm) per foot3/16 inch (5 mm) per foot1/4 inch (6 mm) per foot1/2 inch (13 mm) per foot

Tapered Foam Roof Insulation with Coated Glass Facers: Tapered H-Shield-CG

Blowing Agent: Zero ODP, 3rd generation

Fire Ratings:

UL 1256, No. 120 and 123

UL 790 (ASTM E 108), Class A

UL 263 (ASTM E 119)

FM 4450/4470, Class 1. Fire Rating

FM Approval:  SELECT TYPE----------------Wind Uplift Classification: 1-60Wind Uplift Classification: 1-90

Compressive Strength:  SELECT TYPE----------------20 pounds per square inch (138 kPa)25 pounds per square inch (172 kPa)

Slope of tapered board:  SELECT SLOPE----------------1/16 inch (2 mm) per foot1/8 inch (3 mm) per foot3/16 inch (5 mm) per foot1/4 inch (6 mm) per foot

Tapered Foam Roof Insulation Bonded to Wood Fiberboard: Tapered H-Shield-WF

Blowing Agent: Zero ODP, 3rd generation

Fire Ratings:

UL 1256, No. 120 and 123

UL 790 (ASTM E 108), Class A

UL 263 (ASTM E 119)

FM 4450/4470, Class 1. Fire Rating

FM Approval:  SELECT TYPE----------------Wind Uplift Classification: 1-60Wind Uplift Classification: 1-90

Compressive Strength:  SELECT TYPE----------------20 pounds per square inch (138 kPa)25 pounds per square inch (172 kPa)

Slope of tapered board:  SELECT SLOPE----------------1/16 inch (2 mm) per foot1/8 inch (3 mm) per foot3/16 inch (5 mm) per foot1/4 inch (6 mm) per foot1/2 inch (13 mm) per foot

EXECUTION:

Built-Up, Coal Tar and Modified Bitumen Systems:

Secure each H-Shield panel to the roof deck with Factory Mutual approved fasteners and plates (appropriate to the deck type)

Adhere maximum 4 foot by 4 foot (1220 mm by 1220 mm) panels of H-Shield to a prepared concrete deck with a full mopping of hot steep asphalt

Adhere maximum 4 foot by 4 foot (1220 mm by 1220 mm) panels of H-Shield to a prepared concrete deck with FM approved cold adhesive

Multi Layer System:  SELECT TYPE----------------Multi-layer systems: Adhere subsequent layers with a full mopping of hot steep asphaltMulti-layer systems: Adhere subsequent layers with FM approved cold adhesive

In multi-layer installations, stagger joints in top and bottom layers. Do not align joints in insulation

Install the roof covering according to the roof manufacturer's specifications

Single-Ply Systems Ballasted Single-Ply Systems:

Each H-Shield panel is loosely laid on the roof deck

Butt edges and stagger joints of adjacent panels

Install the roof covering according to the roof manufacturer's specifications

Mechanically Attached Single-Ply Systems:

Each H-Shield panel must be secured to the roof deck with Factory Mutual approved fasteners and plates (appropriate to the deck type)

Butt edges and stagger joints of adjacent panels

Install the roof covering according to the roof manufacturer's specifications

Fully Adhered Single-Ply Systems:

Secure each H-Shield panel to the roof deck with Factory Mutual approved fasteners and plates (appropriate to the deck type)

Adhere maximum 4 foot by 4 foot (1220 mm by 1220 mm) panels of H-Shield to a prepared concrete deck with a full mopping of hot steep asphalt

Adhere maximum 4 foot by 4 foot (1220 mm by 1220 mm) panels of H-Shield to a prepared concrete deck with FM approved cold adhesive

Multi Layer System:  SELECT TYPE----------------Multi-layer systems: Adhere subsequent layers with a full mopping of hot steep asphaltMulti-layer systems: Adhere subsequent layers with FM approved cold adhesive

In multi-layer installations, stagger joints in top and bottom layers. Do not align joints in insulation

Install the roof covering according to the roof manufacturer's specifications

2. When you are finished making selections:

Generate Spec: Word     WP   or   RTF