1. Configure North Country Slate - NATURAL SLATE SHINGLES:

Shingles

Slate Grades: SELECT GRADE------------ASTM C 406 Grade S1: Expected service life in excess of 75 yearsASTM C 406 Grade S2: Expected service life 40-75 yearsASTM C 406 Grade S3: Expected service life 20-40 years

Thickness: SELECT THICKNESS------------Standards; Nominal 3/16 inch (5 mm)Standards; Nominal 3/16 inch (5 mm) to 1/4 inch (7 mm)Quarters; Nominal 1/4 inch (7 mm)Quarters; Nominal 1/4 inch (7 mm) to 3/8 inch (10 mm)Heavies; Nominal 3/8 inch (10 mm) to 1/2 inch (13 mm)Extra Heavies; Nominal 1/2 inch (13 mm) to 3/4 inch (19 mm)_____ inch (_____ mm)Graduated Thickness of ___ inch (___ mm), ___ inch (___ mm), ___ inch (___ mm) & ___ inch (___ mm)To match existing

Sizes:

24 inches (610 mm) length by 12 inches (305 mm) width

22 inches (559 mm) length by 12 inches (305 mm) width

22 inches (559 mm) length by 11 inches (279 mm) width

20 inches (508 mm) length by 14 inches (356 mm) width

20 inches (508 mm) length by 12 inches (305 mm) width

20 inches (508 mm) length by 11 inches (279 mm) width

20 inches (508 mm) length by 10 inches (254 mm) width

18 inches (457 mm) length by 14 inches (356 mm) width

18 inches (457 mm) length by 12 inches (305 mm) width

18 inches (457 mm) length by 11 inches (279 mm) width

18 inches (457 mm) length by 10 inches (254 mm) width

18 inches (457 mm) length by 9 inches (229 mm) width

16 inches (406 mm) length by 14 inches (356 mm) width

16 inches (406 mm) length by 12 inches (305 mm) width

16 inches (406 mm) length by 11 inches (279 mm) width

16 inches (406 mm) length by 10 inches (254 mm) width

16 inches (406 mm) length by 9 inches (229 mm) width

16 inches (406 mm) length by 8 inches (203 mm) width

14 inches (356 mm) length by 10 inches (254 mm) width

14 inches (356 mm) length by 9 inches (229 mm) width

14 inches (356 mm) length by 8 inches (203 mm) width

14 inches (356 mm) length by 7 inches (178 mm) width

12 inches (305 mm) length by 10 inches (254 mm) width

12 inches (305 mm) length by 9 inches (229 mm) width

12 inches (305 mm) length by 8 inches (203 mm) width

12 inches (305 mm) length by 7 inches (178 mm) width

12 inches (305 mm) length by 6 inches (152 mm) width

__ inches (___ mm) length by __ inches (___ mm) width

__ inches (___ mm) length by random width, but not less than one-half length

Graduated Sizes of __in (___mm) length by __in (___mm) width,__in (___mm) length by __in (___mm) width, __in (___mm) length by __in (___mm) width and __in (___mm) length by __in (___mm) width, inches approximate equal quantities. Width not to be less than one-half length

To Match Existing

Cut Butt Shape: SELECT CUT BUTT SHAPE------------Standard square cutSpecial; Pattern to be supplied by Owner/Architect

Color: SELECT COLOR------------Unfading BlackSemi-Weathering (Vermont) Gray/BlackUnfading GraySemi-Weathering (Vermont) GrayUnfading PurpleSemi-Weathering PurpleUnfading Mottled Purple and GreenUnfading GreenSemi-Weathering Green (Sea Green, Gray/Green)Unfading RedCustom Blend of Slate Colors consisting of __% __color, __% __color, __% __color, __% __ color & __% __ colorNorth Country Slate to match existing

Natural Cleft: SELECT NATURAL CLEFT------------Smooth TextureMedium TextureRough Texture

Underlayment and Ice Dam Protection

Underlayment:  SELECT UNDERLAYMENT------------Saturated Felt: ASTM D 4869, Type IV, asphalt-saturated organic felt, unperforated, #26Coated Felt: ASTM D 2626, asphalt-saturated & coated organic felt, mineral surfaced, unperforated, #40Self-Adhering: ASTM D 1970, rubberized asphalt membrane, internal reinforcement, back plastic release filmUnderlayment To Be: _____________(To Fill In)

Ice Dam Protection Membrane:  SELECT ICE DAM PROTECTION MEMBRANE------------ASTM 4869, two layers Type IV, unperforated, #26 asphalt feltASTM D 2626 and ASTM D 4869, one layer coated felt, unperforated, No. 40 nailed, and one layer Type IVASTM D 1970, self-adhering rubberized asphalt membrane, internal reinforcement, and back plastic release film

Sheet Metal Flashings

ASTM A 666 Type 304 stainless steel, soft annealed 2D finish (unless harder temper is required for forming or performance), 0.0156 inch (0.4 mm) thick

ASTM A 167 Type 304 Terne coated stainless steel, 0.015 inch (0.38 mm) thick stainless steel core material, coated with 0.092 lb/sq ft (450 g/sq m) Terne alloy on both sides

ASTM B 370 copper, cold rolled, 16 oz/sq ft (0.56 mm thick), natural finish

ASTM B 370 copper, cold rolled, 20 oz/sq ft (0.69 mm thick), natural finish

ASTM B 101 lead-coated copper, cold rolled Type 1, Grade 2 (unless Grade 2 soft temper is required for forming). Class A lead weight, 16 oz/sq ft (0.56 mm thick) bare copper for total 17.1 oz/sq ft (0.60 mm thick) lead-coated copper

ASTM B 749 lead sheet, 2.5 lb/sq ft (1.00 mm thick)

ASTM B 749 lead sheet, 4.0 lb/sq ft (1.57 mm thick)

DIN 1706 titanium zinc, pre-weathered type with a 99.995 percent Zn degree of purity and alloying additives of 1 percent copper and 1 percent titanium; (0.80 mm thick)

Accessories

Slating Nails for Non-Preservative Treated Plank or Plywood Deck: Slater's copper smooth shank nails Slating Nails for Non-Preservative Treated Plank or Plywood Deck and Nailers: Slaters copper ring shank nails Slating Nails for Non-Preservative, or Preservative Treated Plank or Plywood Deck and Nailers: Slater's stainless steel ring shank nails Slating Nails for Non-Preservative, or Preservative Treated Plank or Plywood Deck and Nailers: Slater's stainless steel smooth shank nails Snow Guards Wood Nailers and Cant Strips: Non-preservative treated wood Butyl Rubber Sealant Wood Nailers and Cant Strips: Preservative-treated wood Polymer Sealant

Installation - Sheet Metal Flashing

Valley Construction: SELECT VALLEY CONSTRUCTION------------Open ValleyClosed Valley

Installation - Cant Strips

Cant Strips:  SELECT CANT STRIP INSTALLATION------------Wood Cant Strips. Apply eave flashing and underlayment over cant stripPressure-Treated Wood Cant Strips. Directly over underlayment at eaves, spacing 1 inch (25 mm) apart for drainage

Installation - Slate Grading

Slate Grading: SELECT GRADING------------Sort slates according to thickness into a minimum of three gradesDo not sort slates according to thickness

Installation - Head Lap

Head Lap: SELECT HEAD LAP------------Slate to be installed at special 2 inches (50 mm) headlapSlate to be installed at standard 3 inches (75 mm) headlapSlate to be installed at special 4 inches (100 mm) headlap

Installation - Shingles

Joint Spacing: SELECT JOINT SPACING------------Slate shingles in each course to be installed with no joint spacing (butted together)Slate shingles in each course to be installed with 1/16 - 1/8 inch (1.6 - 3.2 mm) joint spacing

Installation - Hips

Hip Pattern: SELECT HIP PATTERN------------Saddle PatternMitered PatternFaintail PatternPattern as Indicated on DrawingsInstall approved metal hip caps per manufacturers installation instructions

Installation - Ridges

Ridge Pattern: SELECT RIDGE PATTERN------------Saddle PatternStrip Saddle PatternCombing PatternPattern as Indicated on DrawingsInstall approved metal ridge caps as per manufacturers installation instructions

Warranty

Roofing Installer's Warranty: SELECT WARRANTY PERIOD------------Two years from date of Substantial CompletionFive years from date of Substantial Completion

Extra Materials

Provide an additional: SELECT AMOUNT OF EXTRA MATERIALS------------3% of installed field slates, but not less than one full crate/pallet3% of installed field slatesone square of installed field slates1% of installed field slates

Substitutions

Substitution Allowance: SELECT SUBSTITUTION ALLOWANCE------------Not permittedNot permitted without written approval from architect prior to bid

2. When you are finished making selections:

Generate Spec: Word     WP   or   RTF