1. Configure NewTech - SHINGLES:
SHINGLE
Product: NewTech Shingle fabricated from 100 percent recycled plastic.
Shape: Shingle.
Color: Light Brown.
Length: 18 inches (455 mm).
Thickness: Top: 5/64 inch (2 mm), Bottom: 15/64 inch (6 mm).
Size:
4 inches (102 mm) wide.
5 inches (127 mm) wide.
6 inches (153 mm) wide.
7 inches (178 mm) wide.
8 inches (203 mm) wide.
9 inches (229 mm) wide.
10 inches (254 mm) wide.
SLATE
Product: NewTech Slate fabricated from 100 percent recycled plastic.
Shape:
Colonial Design.
Color:
Light Grey.
Medium Grey.
Dark Grey.
Black.
Old World Red.
Old World Brown.
Old World Green.
Chisel Point Design.
Color:
Light Grey.
Medium Grey.
Dark Grey.
Black.
Old World Red.
Old World Brown.
Old World Green.
Beaver Tail Design.
Color:
Light Grey.
Medium Grey.
Dark Grey.
Black.
Old World Red.
Old World Brown.
Old World Green.
PREPARATION
Decking Material Shingles will be Installed on:
A minimum 15/32 inch (12 mm) plywood.
A minimum 7/16 inch (11 mm) OSB.
1 by 4 nominal lumber.
All previous roofing materials shall be removed prior to installation of shingles.
INSTALLATION
Straight Installation: Consistent exposure of between 6 inches (152 mm) and7-1/2 inches (190 mm). Verify exposure with
Architect.
Staggered Installation: Varied exposure of 1 inch (25 mm) between 6 inches (152 mm) and 7 inches (178 mm). Verify exposure
with Architect.
** NOTE TO SPECIFIER ** NewTech recommends a closed valley system.
Close Valley: Valley metal, broken in the middle and crimped on the outside edges, shall be provided as part of the closed valley
system. Shingle shall be cut to fit flush with matching course onthe opposite side. Wider slates shall be used as valley cuts to
ensure that nailing is kept as far from centerlineas possible (at least 5 inches (127 mm) from centerline).
Open Valley: Valley metal broken with a one-inch diverter in the middle and crimped on the outside edges shall be provided as part
of the open valley system. Metal shall be broken with a diverter at least 1 inch (25 mm) tall. Shingles shall be cut 3 inches (76 mm)
from centerline.
  2. When you are finished making selections:
  Generate Spec: Word     WP   or   RTF