1. Configure CEDAR VALLEY - SIDEWALL SHINGLE PANELS:

Panel Construction:

11/32 inch (9mm) exterior CDX plywood sheathing with tapered top edge

Clear Western red cedar shingles overlapping a minimum of 1 1/2 inches (38mm) over previous panel

Tapered base and top edge of sheathing for better moisture protection and easier alignment

1/8 inch (3mm) glue bead under each row of shingles meets APA Spec. ATG-01

All shingles face-stapled with two 5/8 inch (15mm) galvanized staples covered by succeeding shingle course

Elk Versashield fiberglass mat interleaved under each shingle course

All shingles back stapled through plywood sheathing into butt of shingle to secure it to sheathing until glue sets

Sidewall Shingle Panels:

7 inch Western Red Cedar Sidewall Shingle Panels: SELECT CONFIGURATION-------1 course - 4.76 Square feet (0.44 sm) per panel3 courses - 14.25 Square feet (1.32 sm) per panel

Appearance: SELECT TYPE-------Even butt line, regular textureEven butt line, regular texture, open keywayStaggered butt line, regular textureEven butt line, combed texture

5 Inch Western Red Cedar Sidewall Shingle Panels: SELECT CONFIGURATION-------1 course - 3.57 Square feet (0.33 sm) per panel4 courses - 14.25 Square feet (1.32 sm) per panel

Appearance: SELECT TYPE-------Even butt line, regular textureStaggered butt line, regular texture

4 1/4 Inch Western Red Cedar Sidewall Shingle Panels:

Special Purpose Panels:

Fire Retardant Treatment: Complies with ASTM E 84 Class A rating

Radius Panels:

**NOTE** Insert required radius. Panels available from 4 foot (1219 mm) radius and larger

Radius: ___________

Decorator Cut Panel:

Decorator "Fancy Butt" Panels: SELECT EXPOSURE-------7 1/8 inches (181mm)5.3 inches (134mm)

Panel: SELECT PATTERN-------Wave - 2 CourseRound - 1 CourseFishscale - 1 CourseHexagon - 1 CourseOctagon - 1 CourseFull Cove - 1 CourseArrow - 1 CourseSquare - 1 Course

Corners and Accessories:

Flush Corners: Corners which follow same butt line and depth as sidewall shingle panels

135 Degree Flush Corners: Corners which follow same butt line and depth as sidewall shingle panels

For application on Octagonal structures and those with 135 degree obtuse angles

Add-On Corners: Corners which follow same butt line and overlay in front of sidewall shingle panels

Column Wraps: Two-piece pre-fabricated column covers

**NOTE** Insert required column size. Square & Rectangular Column Wraps available from 5 inches (127 mm) to 10 inches (152mm).

_____ inches (__mm) wide by _____ inches (__mm) long.

Taper Corners: One-piece corner tapering inward to accommodate splayed siding applications

Radius Flare Corners: Three or Four-piece corner set for wall applications requiring flared bases

Inside Corners: 2 inches by 2 inches (51 by 51 mm) nominal. Match panel

Corner boards, trim and molding: Minimum 1 inch (22 mm) from sheathing to allow for 7/8 inch (19 mm)

depth of applied shingle panels

Fasteners:

Nails: SELECT MATERIAL-------Stainless SteelHot-dipped galvanized steel per ASTM 153Aluminum

Nail Type: SELECT TYPE-------Blunt TippedRing ShankTextured Head

Protecting Finish:

Water repellant, fungus and mildew resistant penetrating oil based or alkyd oil stain that is resistant to Ultra Violet

(UV) light. For solid colors, an alkyd oil primer is recommended

Finish: SELECT COLOR-------New Cedar Spice ChestColor:_________manufactured by_________

2. When you are finished making selections:

Generate Spec: Word     WP   or   RTF