| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| 1. Configure LP CANEXEL - SIDING: |
| | Siding |
| | | General: Hardboard in accordance with AHA A135.6 and CGSB 11.5 - M87 |
 | | | Siding: Type 5, high density hardboard siding with textured surface and baked-on finish coat; |
| | | fastening-spline for interlocking system, self-aligning; LP Canexel, Ced'R-Vue. |
| | | | Size and Exposure: 6 inches (152 mm) wide, 3/8 inch (9 mm) thick, 12 feet (3658 mm) long or 16 feet (4877 mm) long; exposure: 4-11/16 inches (119 mm) |
| | | | Texture: Cedar wood grain |
| | | | Color: |
 | | | Siding: Type 5, high density hardboard siding with textured surface and baked-on finish coat; |
| | | fastening-spline for interlocking system, self-aligning; LP Canexel, Ced'R-Vue. |
| | | | Size and Exposure: 9 inches (228 mm) wide, 3/8 inch (9 mm) thick, 12 feet (3658 mm) long or 16 feet (4877 mm) long; exposure: 7-3/4 inches (197 mm) |
| | | | Overlap: 1-1/8 inches (29 mm) |
| | | | Texture: Cedar Wood grain |
| | | | Color: |
 | | | Siding: Type 5, high density hardboard siding with textured surface and baked-on finish coat |
| | | and 5 inch (127 mm) profile; machined "V" edges for interlocking system, self-aligning; LP Canexel, Ultra Plank |
| | | | Size and Exposure: 12 inches (304 mm) wide, 7/16 inch (11 mm) thick, 12 feet (3658 mm) long, exposure: 11 inches (279 mm) |
| | | | Overlap: 7/8 inch (22 mm) |
| | | | Texture: Wood grain |
| | | | Color: |
 | | | Siding: Type 5, high density hardboard siding with textured surface and baked-on finish coat |
| | | and 5 inch (127 mm) profile; machined "V" edges for interlocking system; fastening-spline; LP Canexel, Ridgewood D-5 |
| | | | Size and Exposure: 12 inches (304 mm) wide, 7/16 inch (11 mm) thick, 12 feet (3658 mm) long, exposure: 11 inches (279 mm) |
| | | | Overlap: 7/8 inch (22 mm) |
| | | | Texture: Wood grain |
| | | | Color: |
| | Accessories |
| | | Provide accessories recommended by siding manufacturer to match siding, as required including: |
| | | Prefabricated continuous outside and inside corner trim |
| | | Prefabricated starter strips |
| | | Prefabricated joint moldings |
| | | Thermoplastic caulk |
| | | Prefabricated drip cap |
| | | Colored nails |
| | | J-molding |
| | | Touch-up-paint |
| 2. When you are finished making selections: |
 | Generate Spec: Word WP or RTF |