1. Configure Steel Doors and Frames:

MATERIALS

A. Galvannealed Steel Sheet

Coating Thickness:SELECT THICKNESS--------A40 CoatingA60 Coating

DOORS AND FRAMES

A. Doors: Full Flush (No Vertical Face Seams)

NOTE: Select ONLY 1 of the Following Thicknesses

Thickness: 1-3/4 inches (44 mm)

ANSI Grade DescriptionSELECT GRADE--------Level 1, Model 1; 20 gage (0.8 mm) faces, visible edge seemsLevel 1, Model 2; 20 gage (0.8 mm) faces, no visible edge seemsLevel 2, Model 1; 18 gage (1.0 mm) faces, visible edge seemsLevel 2, Model 2; 18 gage (1.0 mm) faces, no visible edge seemsLevel 3, Model 1; 16 gage (1.3 mm) faces, visible edge seemsLevel 3, Model 2; 16 gage (1.3 mm) faces, no visible edge seemsLevel 4, Model 1; 14 gage (1.7 mm) faces, visible edge seemsLevel 4, Model 2; 14 gage (1.7 mm) faces, no visible edge seems

Thickness: 1-3/8 inches (35 mm)

ANSI Grade DescriptionSELECT GRADE--------Level 1, Model 1; 20 gage (0.8 mm) faces, visible edge seemsLevel 1, Model 2; 20 gage (0.8 mm) faces, no visible edge seemsLevel 2, Model 1; 18 gage (1.0 mm) faces, visible edge seemsLevel 2, Model 2; 18 gage (1.0 mm) faces, no visible edge seems

Faces:SELECT FACE----------Full FlushEmbossed in 6-panel design laminated to polystyrene core

Face Material:SELECT FACE MATERIAL----------Galvannealed Steel SheetGalvanized Steel Sheet

Insulated Doors:SELECT INSULATED DOOR----------Insulated; U-value of 0.10, polyurethane coreInsulated; U-value of 0.13, polystyrene core

Core Shall be as Follows:

3/4 in (19 mm) Cell Honeycomb Core

Expanded Polystyrene Core

Polyurethane Core

Mineral Fiber Core

Beveled Doors

Finish:SELECT FINISH----------Factory Prime FinishFactory Paint Finish

B. Door Reinforcements:

Top & Bottom Channels

For Exterior Doors fill top channel with epoxy & grind smooth

Hinge Reinforcement:

1-3/4 in (44 mm) thick, reinforced with 11 gage channel

1-3/4 in (44 mm) thick, reinforced with 16 gage channel

1-3/8 in (35 mm) thick, reinforced with 16 gage channel

FRAMES CONSTRUCTION

A. Frames: Formed Steel Sheet

Frame Depth:SELECT FRAME DEPTH----------Fixed, as indicated on drawingsAdjustable within 2 in (50 mm) of nominal depth

Gage Description:

ANSI Level 1 Doors:SELECT GAGE-------18 gage (1.2 mm) frames16 gage (1.5 mm) frames

ANSI Level 2 Doors: 16 gage (1.5 mm) frames

ANSI Level 3 Doors:SELECT GAGE-------16 gage (1.5 mm) frames14 gage (1.9 mm) frames

ANSI Level 4 Doors:SELECT GAGE-------14 gage (1.9 mm) frames12 gage (2.6 mm) frames

Material:SELECT MATERIAL--------Galvannealed Steel SheetGalvanized Steel Sheet

Corners:SELECT CORNERS--------Mitered; Knockdown TypeMitered; Face Welded & Ground Smooth

Finish:SELECT FINISH--------Factory Prime FinishFactory Paint Finish

STICK ASSEMBLIES

A. Architectural Stick Assemblies:

Thickness:SELECT THICKNESS--------16 gage (1.3 mm)14 gage (1.7 mm)12 gage (2.4 mm)

Solid Panels:

Panels: Matching Door Construction

Panels: ____________.

2. When you are finished making selections:

Generate Spec: Word     WP   or   RTF