1. Configure Steelcraft - Steel Doors and Frames:

Steel Doors

FLUSH DOORS

Note: Face Sheets:Cold-rolled steel and hot-dip galvannealed steel are available in gages 18, 16, and 14

(1.0, 1.3, and 1.7 mm). 20 gauge (0.8 mm) is available in L Series only.

Steelcraft L Series:

Face Sheet: SELECT SHEET------Cold-rolled steelHot-dip galvannealed steelGraintech wood grain, Cold-rolled steelGraintech wood grain, Hot-dip galvannealed steel

Core Descriptions: SELECT CORE------Impact resistant, resin impregnated, honeycomb coreFull 1-3/4 inches (45 mm) thick rigid polystyreneFull 1-3/4 inches (45 mm) thick rigid polyurethane

Steelcraft B Series

Face Sheet: SELECT SHEET------Cold-rolled steelHot-dip galvannealed steel

Core Descriptions: Vertical stiffeners, hat-shaped, minimum 20 gage (0.8 mm) steel

Vertical Edges: SELECT EDGES-----Vertical EdgesFilled Vertical Edges (FWelded Vertical Edges (W)

Reinforcement and Accessories

Hinge preparation for 4-1/2 inches (114 mm) high full mortise hinges

Hinge preparation for 5 inches (127 mm) high full mortise hinges

Closer reinforced with 14 gauge (1.7 mm) steel.

Note: Factory preparation for mortise or cylindrical lockset is available.

Lockset preparation for mortise lockset.

Lockset preparation for cylindrical lockset.

Glazing Bead: Formed steel sheet or snap-in Dezigner trim.

Fire Rated Doors

TEMPERATURE RISE DOORS-STEELCRAFT T SERIES

Face Sheet: SELECT SHEET------Cold-rolled steel:Hot_dip Galvannealed steelGraintech wood grain, Cold-rolled steelGraintech wood grain, Hot-dip galvannealed steel)

Core: Full 1-3/4 inches (45 mm) mineral fiber core material

Edges: SELECT EDGES-----Vertical EdgesFilled Vertical Edges (F)Welded Vertical Edges (W)

Reinforcement and Accessories

Hinge preparation for 4-1/2 inches (114 mm) high full mortise

Hinge preparation for 5 inches (127 mm) high full mortise hinges

Note: Factory preparation for mortise or cylindrical lockset is available.

Lockset preparation for mortise lockset.

Lockset preparation for cylindrical lockset.

Closer reinforced with 14 gauge (1.7 mm) steel.

Glazing Bead: Formed steel sheet or snap-in Dezigner trim.

Fire Rated Doors

EMBOSSED PANEL DOORS STEELCRAFT CE SERIES

Face Sheet: SELECT SHEET------Hot_dip Galvannealed steelCold-rolled steel

Edges: SELECT EDGES-----Vertical EdgesFilled Vertical Edges (FWelded Vertical Edges (W)

Reinforcement and Accessories

Note: Factory preparation for mortise or cylindrical lockset is available.

Lockset preparation for mortise lockset.

Lockset preparation for cylindrical lockset.

Closer reinforced with 14 gauge (1.7 mm) steel.

Glazing Bead: Formed steel sheet or snap-in Dezigner trim.

Fire Rated Doors

Note: Do not select face sheet for Graintech wood grain finish if not required.

GRAINTECH DOORS

Select Finishes

Ash wood tone finish color

Birch wood tone finish color

Mahogany wood tone finish color

Maple wood tone finish color

Oak wood tone finish color

Walnut wood tone finish color

Wood tone finish color as selected by the Architect

STEEL SERIES FLUSH DOORS - STEELCRAFT LS SERIES

Face Sheet: SELECT SHEET------Stainless steel, ASTM A 666, Type 304, 18 gage (1.0 mm); No. 4 finish.Stainless steel, ASTM A 666, Type 316, 18 gage (1.0 mm); No. 4 finish.

Core Descriptions: SELECT CORE-----Impact resistant, resin impregnated, honeycomb coreFull 1-3/4 inches (45 mm) thick rigid polystyreneFull 1-3/4 inches (45 mm) thick rigid polyurethane

Reinforcement and Accessories

Hinge preparation for 4-1/2 inches (114 mm) high full mortise

Hinge preparation for 5 inches (127 mm) high full mortise hinges

Closer reinforced with 14 gauge (1.7 mm) steel.

Note: Factory preparation for mortise or cylindrical lockset is available.

Lockset preparation for mortise lockset.

Lockset preparation for cylindrical lockset.

Glazing Bead: Formed steel sheet or snap-in Dezigner trim.

TORNADO DOOR SYSTEMS - STEELCRAFT PALADIN TORNADO DOOR SYSTEMS

Fire Rated Doors

HURRICANE DOOR SYSTEMS - STEELCRAFT H SERIES

Face Sheet: SELECT SHEET------Face sheets shall be 14 gage (1.7 mm) hot-dipped galvannealed steel.Face sheets shall be 16 gage (1.3 mm) hot-dipped galvannealed steel.

Edges: SELECT EDGES-----Vertical EdgesFilled Vertical Edges (FWelded Vertical Edges (W)

Core Descriptions: SELECT CORE-----Resin impregnated Kraft honeycomb core20 gage vertical stiffeners manufactured from galvannealed steelRigid polystyrene core

STILE and RAIL DOORS:

Steelcraft A Series:

Intermediate Rails

Steelcraft AN Series:

Intermediate Rails

Steelcraft S Series:

Closer preparation

Reinforcement and Accessories

Note: Factory preparation for mortise or cylindrical lockset is available.

Lockset preparation for mortise lockset.

Lockset preparation for cylindrical lockset.

Note: Dezigner Glass Trim for L, B, CE, T and LS Series Doors.

GLASS TRIM FOR DOORS LITES SELECT GLASS TRIM-----Interlock glass trim into the recessed formed area of the doorUse glass lite trim to cap the cutout

FABRICATION FOR STEEL DOORS

Closure Channels: SELECT CHANNELS------Recessed closure channelsFlush closure channels

Provide cutouts and reinforcements required for electrical and security components

Provide cut-outs in doors for lites and louvers

Install glazing beads and louvers in doors

STEEL FRAMES

FLUSH STEEL FRAMES:

Steelcraft F Series:

Profile: SELECT PROFILE------Profile:For Single Rabbet and Double Egress FrameProfile:For Double Rabbet

Steelcraft FE Series:

Profile is For Single Rabbet and Double Egress Frame

Steelcraft DE Series:

Profile is For Double Rabbet and Double Egress Frame

Steelcraft MU Series:

Profile is For Double Rabbet and Double Egress Frame

Steelcraft FS Series:

Profile is For Double Rabbet and Double Egress Frame

Frame Materials: SELECT MATERIAL------Cold-rolled steelHot-dip galvanized steelStainless steel

Construction: SELECT CONSTRUCTION------Three-piece knock-down framesFactory-welded frames; mitered joints

Reinforcement and Accessories

Hinge preparation for 4-1/2 inches (114 mm)

Hinge preparation for 5 inches (127 mm)

Fire Rated Frame

Finish: SELECT FINISH------Factory primer finishFactory baked finish

STEEL FRAMES FOR DRYWALL:

Steel Frames: SELECT FRAME------Steelcraft DW SeriesSteelcraft K Series

Frame Material: SELECT MATERIAL------Cold-rolled steelHot-dip galvanized steel

Reinforcement and Accessories

Hinge preparation for 4-1/2 inches (114 mm) high full mortise

Hinge preparation for 5 inches (127 mm) high full mortise

Base Anchors: SELECT ANCHORS------Lock-in TypeExposed fastener Type

Fire Rated Frame

Finish: SELECT FINISH------Factory primer finishFactory baked finish

HOLLOW METAL FRAMING SYSTEMS - ARCHITECTURAL STICK SYSTEMS

Frame Material: SELECT MATERIAL------Cold-rolled steelHot-dip galvanized steel

Reinforcement and Accessories

Hinge preparation for 4-1/2 inches (114 mm) high full mortise

Hinge preparation for 5 inches (127 mm) high full mortise

Glazing Bead: SELECT GLAZING BEAD------Formed steel sheet; screw-attachedFormed steel sheet; snap-in installation

Steel Panels: SELECT PANELS------Shall be furnished 3/8 inch (9.5 mm) thickShall be furnished 1/2 inch (12.5 mm) thickShall be furnished 1-3/4 inches (45 mm) thick: not applicable to fire rated assemblies

Fire Rated Doors

SEVERE WINDSTORM RESISTANT STEEL FRAMES - STEELCRAFT FP SERIES

Construction: SELECT CONSTRUCTION------Three-piece knock-down framesFactory-welded frames

Reinforcement and Accessories

Hinge preparation for 4-1/2 inches (114 mm) high full mortise

Hinge preparation for 5 inches (127 mm) high full mortise

Wall Anchors

Wire Masonry Anchors

Base Anchors

Existing Masonry Anchors

Welded-in Existing Masonry Anchors

Fire Rated Doors

FABRICATION STEEL FRAMES

Provide cutouts and reinforcements required for electrical and security components

Kerfed Frames

Hospital Stops: SELECT STOPS------4 inches (101.6 mm) from the bottom of the jambs on a 45 degree angle.4 inches (101.6 mm) from the bottom of the jambs on a 90 degree angle5-1/2 inches (137.5 mm) from the bottom of the jambs on a 45 degree angle4 inches (101.6 mm) from the bottom of the jambs on a 90 degree angle

Silencers

ACCESSORIES

Note: Select if pairs of door are in project

Astragals for pairs of doors

FINISHES

Note:Select second finish option if only primed doors or frames are specified;

or select both finish option if doors or frames are pre-finished

Factory Primer Finish

Factory Baked Paint Finish

4. When you are finished making selections:

Generate Spec: Word     WP   or   RTF