1. Configure Pilkington North America Inc. Building Products - MATERIALS:

Clear Uncoated Float Glass:

Pilkington North America Inc. Clear Float Glass.

Description: Annealed clear float glass meeting requirements of ASTM C 1036, Type 1, Class 1, Quality q3.

Tinted Uncoated Float Glass:

Pilkington North America ____ Tinted Float Glass.

Description: Annealed tinted float glass meeting requirements of ASTM C 1036, Type 1, Class 2, Quality q3.

Reflective Coated Float Glass:

Pilkington Eclipse ________ Advantage Reflective Low-E Glass.

Description: Annealed clear/tinted coated float glass meeting requirements of ASTM C 1036, Type 1, Class 1, Quality q3.

Low-Emissivity Coated Float Glass:

Pilkington Energy Advantage Low-E Glass.

Description: Annealed clear coated float glass meeting requirements of ASTM C 1036, Type 1, Class 1, Quality q3.

Solar Control Low-Emissivity Coated Float Glass:

Pilkington Solar E Solar Control Low-E Glass.

Description: Annealed clear coated float glass meeting requirements of ASTM C 1036, Type 1, Class 1, Quality q3.

Transparent Mirror:

Pilkington Mirropane T.M. Transparent Mirror.

Description: ASTM C 1036, Type 1, Class 3, Quality q3; with pyrolitic coating.

Anti-Reflective Glass:

Pilkington OptiView Anti-Reflective Glass.

Description: Laminated Glass with OptiView coating surfaces #1 and #4.

Heat-Retardant Glass:

Pilkington Pyrostop Fire-Rated Safety Transparent Wall Panel.

Description: Clear glass layers, meeting requirements of ASTM C 1036, Type 1, Class 1, Quality q3.

Glazing Tape:SELECT TAPE--------Butyl compound tape with integral resilient tube spacer, 10 to 15 Shore A durometer hardness, black color, coiled on release paper.Closed cell polyvinyl chloride foam, maximum water absorption by volume 2 percent, designed for 25 percent compression.

Note: Select option below if glazing in wood frames.

Glazing Clips: Manufacturer's standard type.

Note: Select option below if specifying spandrel glass with enamel opacifier coating.

Silicone Polyester Enamel: Type recommended by flat glass materials manufacturer; color selected by Architect.

FABRICATION:

Laminated Glass:

Heat strengthen float glass materials in accordance with ASTM C 1048, Kind HS.

Sealed Insulating Glass Units:

Outer Pane:

Note: Select one of the following two options if heat strengthening is required.

Heat Treating:SELECT TREATING--------Heat strengthened.Fully tempered.

Coating: Surface __.

Air Space:SELECT AIR SPACE--------___ inch wide, hermetically sealed, dehydrated air space.___ inch wide, hermetically sealed, argon gas filled, dehydrated air space.

Inner Pane:

Note: Select one of the following two options if heat strengthening is required.

Heat Treating:SELECT TREATING--------Heat strengthened.Fully tempered.

Coating: Surface __.

Provide unit edge seals meeting requirements of ASTM E 773, with aluminum spacers, and silicone sealant for glass-to-spacer seals.

Monolithic Spandrel Glass Units:

Heat Strengthening:SELECT STRENGTHENING--------Heat strengthened float glass materials in accordance with ASTM C 1048, Kind HS.Tempered float glass materials in accordance with ASTM C 1048, Kind FT.

Glass Surface:SELECT SURFACE--------Apply ceramic fused frit to indicated glass surface.Apply silicone polyester enamel opacifier coating to indicated glass surface.

Sealed Insulating Spandrel Glass Units:

Heat Strengthening:SELECT STRENGTHENING--------Heat strengthened float glass materials in accordance with ASTM C 1048, Kind HS.Tempered float glass materials in accordance with ASTM C 1048, Kind FT.

Glass Surface:SELECT SURFACE--------Apply ceramic fused frit to indicated glass surface.Apply silicone polyester enamel opacifier coating to indicated glass surface.

INSTALLATION:

Note: Select one of the following choices below if only coated monolithic glass is specified.

Monolithic Glass Installation:SELECT SURFACE--------Install coated monolithic glass with coated surface to exterior (Surface 1).Install coated monolithic glass with coated surface to interior (Surface 2).

Install Sealants:SELECT SEALANT--------Install sealants in accordance with Section 07900.Install sealants in accordance with ASTM C 804 for solvent release sealants.Install sealants in accordance with sealant manufacturers' instructions.

2. When you are finished making selections:

Generate Spec: Word     WP   or   RTF