1. Configure CLARKWESTERN - COMPONENTS:
Nonstructural Studs:
Cold-Formed galvanized steel C-studs.
Web Depth:
SELECT DEPTH
--------
1 5/8 inch (41 mm) 162 depth.
2 1/2 inch (64 mm) 250 depth.
3 1/2 inch (89 mm) 350 depth.
3 5/8 inch (92 mm) 362 depth.
4 inch (102 mm) 400 depth.
5 1/2 inch (140 mm) 550 depth.
6 inch (152.4 mm) 600 depth.
As indicated on drawings.
Minimum Material Thickness:
Traditional 25ga or
Traditional 20ga or
UltraSTEEL 25 EQ.
UltraSTEEL 20 EQ.
Punch Outs:
SELECT PUNCH OUT
--------
12 inches (305mm) from base and every 48 inches (1219mm) thereafter. (East Coast Market)
24 inches (610 mm) from base and every 48 inches (1219mm) thereafter. (West Coast Market)
Nonstructural Track:
Cold-Formed galvanized steel runner tracks.
Web Depth:
1 5/8 inch (41 mm) 162 depth.
2 1/2 inch (64 mm) 250 depth.
3 1/2 inch (89 mm) 350 depth.
3 5/8 inch (92 mm) 362 depth.
4 inch (102 mm) 400 depth.
5 1/2 inch (140 mm) 550 depth.
6 inch (152.4 mm) 600 depth.
Track web to match stud web size.
Minimum Material Thickness:
Traditional 25ga or
Traditional 20ga or
Track thickness to match wall stud.
UltraSTEEL 25 EQ.
UltraSTEEL 20 EQ.
Deflection Track:
Cold-Formed Deep Leg Runner Slip Track.
Leg Length:
2 inch (51 mm) T200 flange.
2 1/2 inch (63 mm) T250 flange.
3 inch (76mm) T300 flange.
3 1/2 inch (89 mm) T350 flange.
As required by design.
Minimum Material Thickness:
18 mil (25 gauge) 0.0179 inches.
30 mil (20 gauge) 0.0296 inches.
33 mil (20 gauge) 0.0329 inches.
43 mil (18 gauge) 0.0428 inches.
54 mil (16 gauge) 0.0538 inches.
68 mil (14 gauge) 0.0677 inches.
97 mil (12 gauge) 0.0966 inches.
As required by design.
Minimum Yield Strength:
SELECT STRENGTH
--------
33ksi (227 MPa) (for 33mils through 118mils).
50ksi (345 MPa) (optional for 54mils and up).
As required by design.
U-Channel (CRC Cold Rolled Channel):
U-Channel:
SELECT SIZE
--------
150U50-54 1-1/2 inch (38mm) 54mils (16ga.).
075U50-54 3/4 inch (19.1mm) 54mils (16ga.).
As required by design.
Furring Channel:
Furring existing walls and suspended ceiling applications.
Furring Channel:
SELECT SIZE
--------
087F125-18 7/8 inch (22mm) Furring Channel 18mils (25ga).
087F125-27 7/8 inch (22mm) Furring Channel 27mils (22ga).
087F125-30 7/8 inch (22mm) Furring Channel 30mils (20ga Drywall).
087F125-33 7/8 inch (22mm) Furring Channel 33mils (20ga Structural).
087F125-43 7/8 inch (22mm) Furring Channel 43mils (18ga).
087F125-54 7/8 inch (22mm) Furring Channel 54mils (16ga).
150F125-18 1 1/2 inch (38mm) Furring Channel 18mils (25ga).
150F125-27 1 1/2 inch (38mm) Furring Channel 27mils (22ga).
150F125-30 1 1/2 inch (38mm) Furring Channel 30mils (20ga Drywall).
150F125-33 1 1/2 inch (38mm) Furring Channel 33mils (20ga Structural).
150F125-43 1 1/2 inch (38mm) Furring Channel 43mils (18ga).
150F125-54 1 1/2 inch (38mm) Furring Channel 54mils (16ga).
As required by design.
Resilient Channel:
Cold-Formed Resilient Channel System to decrease sound transmissions.
Resilient Channel:
SELECT SIZE
--------
One Leg 1/2 inch x 2 1/4 inch Resilient Channel.
Two Leg 1/2 inch x 1 1/4 inch Resilient Channel.
Shaft Wall System:
Coordinate materials found in this section with applications and materials found in Section 09260.
Shaft Wall Application:
SELECT APPLICATION
--------
Elevator Shafts.
Stairwells.
Mechanical Shafts.
Unlined Air Shafts.
Other: _________________.
Shaft Wall Width:
SELECT WIDTH
--------
CH-Stud & E-Stud with J-Runner, 2 1/2 inch Wide (64 mm).
Shaft Wall Width: CH-Stud & E-Stud with J-Runner, 4 inch Wide (102 mm).
Shaft Wall Width: CH-Stud & E-Stud with J-Runner, 6 inch Wide (152 mm).
Shaft Wall Material Thickness:
SELECT THICKNESS
--------
25 gauge (18 mils).
20 gauge (33 mils).
Shaft Wall Deflection:
SELECT DEFLECTION
--------
L/120.
L/240.
L/360.
Area Separation Wall System:
Lightweight non-load-bearing gypsum panel assembly designed to provide fire resistive protection at common walls.
Drywall Corner Beads:
Cold-Formed galvanized steel beads.
103 USG Durabead Deluxe Metal Corner Bead 1 1/4 in x1 1/4 in (32mm x 32mm).
Bull Nose Drywall Corner Bead with 3/4 in Radius.
Drywall Trims:
Cold-Formed galvanized steel trims.
L-Trim (Mudable) Size: 1/2 in (12.7 mm).
L-Trim (Mudable) Size: 5/8 in (15.9 mm).
U-Trim (Mudable) Size: 1/2 in (12.7 mm).
U-Trim (Mudable) Size: 5/8 in (15.9 mm).
J-Trim (Reveal) Size: 1/2 in (12.7 mm).
J-Trim (Reveal) Size: 5/8 in (15.9 mm).
Framing Accessories:
Accessories required in this project.
Flat Strapping for Backing Strip.
Flat Strapping and bridging for lateral bracing.
SwiftClip Fixed Connection Angles.
L-Angles.
2. When you are finished making selections:
Generate Spec:
Word
WP
or
RTF