Dietrich Metal Framing, Inc. - Non-Structural Metal Framing

START HERE
The SpecWizard concept is simple as 1, 2, 3:
        1. Select products on the right
                by checking check boxes
        2. Configure the products
                by selecting options
        3. Generate Spec
                in Word, WP or RTF


Dietrich Metal Framing; non-load-bearing metal studs, runner track, and other components for partitions, shaftwall, stairwalls, and area separation walls.
.
This section is based on the products of Dietrich Metal Framing, which is located at:
500 Grant Street
Suite 2226
Pittsburgh, PA 15219
Tel: (412) 281-2805
Fax: (412) 281-2965
E-mail: askforhelp@dietrichindustries.com
Web: www.dietrichmetalframing.com.

[ Click Here ] for additional product data and info.

Dietrich Metal Framing, a Worthington Industries Company, is the leading manufacturer of light-gauge framing and finishing products for commercial and residential construction. Dietrich Metal Framing provides a wide selection of light-gauge framing and finishing products including drywall and structural framing, floor joists, roof trusses, metal lath, fire-rated assemblies, numerous deflection systems and an extensive line of metal, vinyl, veneer, paper-faced, plaster and stucco beads and trims. Dietrich Metal Framing companies and divisions - include Dietrich Design Group, , Aegis Metal Framing, Vinyl Corp., Dietrich Metal Framing Canada; operate 31 manufacturing and service locations in North America.
Dietrich Metal Framing also provides total light-gauge design services through its design services group, Dietrich Design Group. DDG is the largest group of design engineers devoted solely to light-gauge steel framing design. They can provide shop drawings, technical recommendations, and member sizing, DDG is licensed in all 50 states and now operates in three locations; Hammond, IN; McDonough, GA and Carlsbad, CA.
Research Building Product info:
[ ARCAT.com ]

[ Comments? ]
[ What would make SpecWizard better? ]