1. Configure SOUND SEAL - WOOD CEILINGS:

WOOD VENEERED CEILING PANEL SYSTEM

WoodTrends Elite

Performance:

Flame Spread: SELECT FLAME SPREAD CLASSIFICATION----------Class A, 25 or less; Smoke Developed, 450 or lessClass B, 26 to 75Class C, 76-200

Noise Reduction Coefficient: SELECT NRC----------0.45 NRC0.5 NRC0.6 NRC0.65 NRC0.7 NRC0.75 NRC0.8 NRC0.85 NRC0.9 NRCCustom NRC

Panel:

Construction: Fire-retardant 0.67 inch (17 mm) thick core with blind veneer backer with 0.024 inch (0.6 mm) thick wood veneer face.

Size: SELECT PANEL SIZE----------24 inches (610 mm) by 24 inches (610 mm)24 inches (610 mm) by 48 inches (1219 mm)12 inches (305 mm) by 72 inches (1829 mm)Custom Size

Edges: Edge detail allowing automatic alignment of panels on grid and full accessibility at each panel

Two edges to have rabbet.

One edge to have rabbet with alignment kerf.

One edge to have rabbet with deep kerf and two compression springs.

All edges finished with melamine edge banding in matching color.

Perforations:

Round Perforations:

Hole Size: SELECT HOLE SIZE----------7 mm8 mm9 mm5 mm / 9 mm Dual Diameter1.5 / 5 mm Dual Diameter

Hole to Hole Center Distance: SELECT CENTER DISTANCE----------8 mm (Micro Perf only)16 mm32 mm64 mm

Pattern: SELECT PATTERN----------RegularStaggered

Elongated Perforations:

Size: 8 mm wide by up to 104 mm long

Hole to Hole Center: SELECT CENTER DISTANCE----------24 mm32 mm48 mm

Pattern: SELECT PATTERN----------RegularStaggered

Custom Perforations:

Pattern: SELECT PATTERN----------RegularStaggered

Acoustic Textile: Adhered to back of panel

Support System: Intermediate duty 15/16 inch (24 mm) T-grid.

WOOD VENEERED LAY-IN TEGULAR EDGE CEILING SYSTEM

WoodTrends Basic

Performance:

Flame Spread: SELECT FLAME SPREAD CLASSIFICATION----------Class A, 25 or less; Smoke Developed, 450 or lessClass B, 26 to 75Class C, 76-200

Noise Reduction Coefficient: SELECT NRC----------0.45 NRC0.5 NRC0.6 NRC0.65 NRC0.7 NRC0.75 NRC0.8 NRC0.85 NRC0.9 NRCCustom NRC

Panel:

Construction: Fire-retardant .50 inch (13 mm) thick MDF with blind veneer backer with .024 inch (0.6 mm) thick wood veneer face.

Size: SELECT PANEL SIZE----------24 inches (610 mm) by 24 inches (610 mm)24 inches (610 mm) by 48 inches (1219 mm)12 inches (305 mm) by 72 inches (1829 mm)Custom Size

Edge Detail: 0.20 inches (5 mm) deep by .30 inches (8 mm) wide rabbet for drop-in mounting.

Perforations:

Round Perforations:

Hole Size: SELECT HOLE SIZE----------7 mm8 mm9 mm5 mm / 9 mm Dual Diameter1.5 / 5 mm Dual Diameter

Hole to Hole Center Distance: SELECT CENTER DISTANCE----------8 mm (Micro Perf only)16 mm32 mm64 mm

Pattern: SELECT PATTERN----------RegularStaggered

Elongated Perforations:

Size: 8 mm wide by up to 104 mm long

Hole to Hole Center Distance: SELECT CENTER DISTANCE----------24 mm32 mm64 mm

Pattern: SELECT PATTERN----------RegularStaggered

Custom Perforations:

Pattern: SELECT PATTERN----------RegularStaggered

Acoustic Textile: Adhered to back of panel

Support System:

Install with drop-in mounting on intermediate duty T-grid: SELECT GRID FACE WIDTH----------9/16 inch (14 mm)15/16 inch (24 mm)

Install with drop-in mounting on heavy duty T-grid: SELECT GRID FACE WIDTH----------9/16 inch (14 mm)15/16 inch (24 mm)

WOOD VENEERED CONCEALED GRID CEILING SYSTEM

WoodTrends Select

Performance:

Flame Spread: SELECT FLAME SPREAD CLASSIFICATION----------Class A, 25 or less; Smoke Developed, 450 or lessClass B, 26 to 75Class C, 76-200

Noise Reduction Coefficient: SELECT NRC----------0.450.50.6 NRC0.65 NRC0.7 NRC0.75 NRC0.8 NRC0.85 NRC0.9 NRCCustom NRC

Panel:

Construction: Fire-retardant 0.67 inch (17 mm) thick MDF with blind veneer backer with 0.024 inch (0.6 mm) thick wood veneer face.

Size: SELECT PANEL SIZE----------24 inches (610 mm) by 24 inches (610 mm)24 inches (610 mm) by 48 inches (1219 mm)12 inches (305 mm) by 72 inches (1829 mm)Custom Size

Edges Detail:

Rabbet on one edge.

Rabbet with kerf opposite edge.

Adjacent edges square.

Edges to have 2 mm bevel.

Perforations:

Round Perforations:

Hole Size: SELECT HOLE SIZE----------7 mm8 mm9 mm5 mm / 9 mm Dual Diameter1.5 / 5 mm Dual Diameter

Hole to Hole Center Distance: SELECT CENTER DISTANCE----------8 mm (Micro Perf only)16 mm32 mm64 mm

Pattern: SELECT PATTERN----------RegularStaggered

Elongated Perforations:

Size: 8 mm wide by up to 104 mm long

Hole to Hole Center Distance: SELECT CENTER DISTANCE----------24 mm32 mm48 mm

Pattern: SELECT PATTERN----------RegularStaggered

Custom Perforations:

Pattern: SELECT PATTERN----------RegularStaggered

Acoustic Textile: Adhered to back of panel

Support System: Install ceiling panels with drop-in mounting on heavy-duty Z-bar (Jumbo DCS-57) as manufactured by Donn.

WOOD VENEERED PLANK CEILING SYSTEM

WoodTrends Standard

Performance:

Flame Spread: SELECT FLAME SPREAD CLASSIFICATION----------Class A, 25 or less; Smoke Developed, 450 or lessClass B, 26 to 75Class C, 76-200

Noise Reduction Coefficient: SELECT NRC----------0.45 NRC0.5 NRC0.6 NRC0.65 NRC0.7 NRC0.75 NRC0.8 NRC0.85 NRC0.9 NRCCustom NRC

Panel:

Construction: Fire-retardant .50 inch (13 mm) thick core with blind veneer backer with 0.024 inch (0.6 mm) thick wood veneer face.

Size: SELECT PANEL SIZE----------4 1/2 inches (115 mm) wide by 96 inches (2438 mm) long9 1/2 inches (240 mm) wide by 96 inches (2438 mm) long11 1/2 inches (290 mm) wide by 96 inches (2438 mm) long24 inches (610 mm) wide by 24 inches (610 mm) longCustom Size

Edge Detail: SELECT EDGE DETAIL----------Reveal edge shall utilize wood strip to hide pivot clipFlush edge panels shall butt together with 2 mm bevel delineating panel edges

Perforations:

Round Perforations:

Hole Size: SELECT HOLE SIZE----------7 mm8 mm9 mm5 mm / 9 mm Dual Diameter1.5 / 5 mm Dual Diameter

Hole to Hole Center Distance: SELECT CENTER DISTANCE----------8 mm (Micro Perf only)16 mm32 mm64 mm

Pattern: SELECT PATTERN----------RegularStaggered

Elongated Perforations:

Size: 8 mm wide by up to 104 mm long

Hole to Hole Center Distance: SELECT CENTER DISTANCE----------24 mm32 mm48 mm

Pattern: SELECT PATTERN----------RegularStaggered

Custom Perforations:

Pattern: SELECT PATTERN----------RegularStaggered

Acoustic Textile: Adhered to back of panel

Support System: Install planks with pivot clip on intermediate duty 15/16 inch (24 mm) T-grid. Support panels with pivot clip at a distance of not more than 24 inches (610 mm).

WoodTrends Timbre

Performance:

Flame Spread: SELECT FLAME SPREAD CLASSIFICATION----------Class A, 25 or less; smoke developed, 450 or lessClass C, 76-200

Panel:

Material: Wood veneer laminated to fire retardant chipboard with blind veneer backer.

Size: 23 13/16 inches (605 mm) wide by 102 inches (2591 mm) long.

Chipboard Thickness: SELECT THICKNESS----------0.95 inches (24 mm)1.2 inches (31 mm)

Edge Detail: Plank edges with overlap configuration.

Design:

TIMBRE 24/2 Design:

Configuration: 0.16 inch (4 mm) groove 1.3 inches (33 mm) apart.

Width: 23.8 inches (605 mm) wide plank.

Standard Length: 102 inches (2591 mm).

Flame Spread: Class A only.

NRC: SELECT NRC----------With open cavity to back of panel: 0.70With closed cavity to back of panel: 0.40

TIMBRE 31/1 Design:

Configuration: 0.16 inch (4 mm) groove 0.91 inch (23 mm) apart.

Width: 23.6 inches (600 mm) wide plank.

Standard Length: 98 inches (2489 mm).

Flame Spread: Class C only.

NRC: SELECT NRC----------With open cavity to back of panel, 0.85With closed cavity to back of panel, 0.45

Support System: Install planks by means of overlap edge configuration on hardwood or metal furring. Glue and staple panels with nails to the furring on distances not greater than 24 inches (610 mm) centers.

VENEER AND FINISH

Veneer: Grade A Quality veneer from manufacturer's standard selection of wood species.

Veneer: Special veneers with staining and lacquering to match Architect's samples.

Veneer Species:

American Walnut

American Oak

European Oak

Anigre

Ash

Khaya Mahogany

Beech Steamed

Beech Unsteamed

Maple

Oregon Pine

Pear

Carolina Pine

Sapeli Mahogany

Cherry

Teak

Other Species

Veneer Finish: Two coats clear UV- Polyacrylate lacquer.

2. When you are finished making selections:

Generate Spec: Word     WP   or   RTF