1. Configure InPro Corporation (IPC) - RIGID VINYL WALL COVERING:

PROTECTIVE WALL COVERING

IPC Rigid PVC Sheet:

Texture: SELECT TEXTURE--------PebbletteVelvet

Surface Burning Characteristics: Provide UL Classified IPC RigidVinyl Sheet conforming to the NFPA Class A fire rating. Surface burning characteristics as determined byUL-723 (ASTM E-84), for IPC Rigid Vinyl Sheet installed with 3M Fastbond 30, InPro Bond Adhesive, or Formulated Solutions, LLC "XT- 2000+" Adhesive shall be a maximum flame spread of 20 and a maximum smoke developed of 350 for .060 inch (1.5mm) thick material. Provide ULC (Canada) listed IPC Rigid Vinyl Sheet conforming to the requirements of the National Building Code of Canada 1990, Subsection 3.1.13. Surface burning characteristics, as determined by CAN/ULC-S102.2, shall be flame spread of 15 and smoke developed of 30.

Self Extinguishing: Provide rigid vinyl sheet with a CC1 classification, as tested in accordance with the procedures specified in ASTM D-635-74, Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Self-Supporting Plastics in a Horizontal Position, as referenced in UBC 52-4-1988.

Fire Prevention: Provide sheet materials that have been tested and results filed in compliance with article 15, part 1120 of the New York State uniform fire prevention and building code. DOS # 09960-930504-4001.

Impact Strength: Provide IPC Rigid Vinyl Sheet that has an Impact Strength of 30.4 ft-lbs/ inch of thickness as tested in accordance with the procedures specified in ASTM D-256-90b, Impact Resistance of Plastics.

Chemical and Stain Resistance: Provide rigid vinyl sheet that show resistance to stain when tested in accordance with applicable provisions of ASTM D-543.

Fungal and Bacterial Resistance: Provide rigid vinyl that does not support fungal or bacterial growth as tested in accordance with ASTM G-21 and ASTM G-22.

Sheet Size: SELECT SIZE-------- 36 inches by 96 inches (914x2438mm) 48 inches by 96 inches (1219 x2438mm) 36 inches by 120 inches (914x3048mm) 48 inches by 120 inches (1219 x3048mm)

Thickness: SELECT THICKNESS-------- .030 inches (0.8mm) .040 inches (1mm) .060 inches (1.5mm) .080 inches (2mm)

Color: SELECT COLOR-------- As selected from manufacturer's standard colors ______________. (to be inserted)

Color Consistency: Provide components matched in accordance with SAE J-1545 - (Delta E) with a color difference no greater than 1.0 units using CIE Lab, CIE CMC, CIE LCh, Hunter Lab or similar color space scale systems.

IPC EnviroGT G2 series rigid sheet:

Texture: SELECT TEXTURE--------PebbletteVelvet

Surface Burning Characteristics: Provide IPC EnviroGT Sheet conforming with the NFPA Class A fire rating

Fungal and Bacterial Resistance: Provide rigid G2 Blend sheet that does not support fungal or bacterial growth as tested in accordance with ASTM G-21 and ASTM G-22

Sheet Size: SELECT SIZE--------36 inches by 96 inches (914x2438mm)48 inches by 96 inches (1219 x2438mm)36 inches by 120 inches (914x3048mm)48 inches by 120 inches (1219 x3048mm)

Thickness: SELECT THICKNESS--------.030 inches (0.8mm).040 inches (1mm).060 inches (1.5mm).080 inches (2mm)

Color: SELECT COLOR--------As selected from manufacturer's standard colors_________________

Color Consistency: Provide components matched in accordance with SAE J-1545 - (Delta E) with a color difference no greater than 1.5 units using CIE Lab, CIE CMC, CIE LCh, Hunter Lab or similar color space scale systems.

Trim: Provide vinyl trim components in the same color matching the wall covering, for use with .030 inch (0.8mm), .040 inch (1mm) and .060 inch (1.5mm) thick sheet

Trim: Provide vinyl trim components in the same color matching the wall covering, for use with .080 inch thick sheet

Trim: Provide G2 Blend trim components in the same color matching the wall covering, for use with .030 inch (0.8mm), .040 inch (1mm) and .060 inch (1.5mm) thick sheet

Trim: Provide G2 Blend trim components in the same color matching the wall covering, for use with .080 inch thick sheet

2. When you are finished making selections:

Generate Spec:   Word     WP   or   RTF