09900 - INTERIOR, EXTERIOR AND INDUSTRIAL PAINTS AND COATINGS ARCAT SpecWizard

1. Configure Sherwin-Williams - INTERIOR, EXTERIOR AND INDUSTRIAL PAINTS AND COATINGS:

INTERIOR PAINT SYSTEMS

CONCRETE: (Walls and Ceilings, Poured Concrete, Precast Concrete, Unglazed Brick, Cement Board, Tilt-Up, Cast-In-Place).

Latex Systems:

Gloss:

1st Coat: S-W Loxon Acrylic Masonry Primer, A24W8300 (8 mils wet, 3.2 mils dry).

2nd Coat: S-W ProMar 200 Latex Gloss B21-200 Series.

3rd Coat: S-W ProMar 200 Latex Gloss B21-200 Series (4 mils wet, 1.5 mils dry per coat).

Semi-Gloss Finish:

1st Coat: S-W Loxon Acrylic Masonry Primer, A24W8300 (8 mils wet, 3.2 mils dry).

2nd Coat: S-W ProMar 200 Latex Semi-Gloss, B31-2200 Series.

3rd Coat: S-W ProMar 200 Latex Semi-Gloss, B31-2200 Series (4 mils wet, 1.3 mils dry per coat).

Semi-Gloss Finish (Low Odor - Low VOC):

1st Coat: S-W Loxon Acrylic Masonry Primer, A24W8300 (8 mils wet, 3.2 mils dry).

2nd Coat: S-W ProGreen 200 Interior Latex Semi-Gloss, B31-600 Series.

3rd Coat: S-W ProGreen 200 Interior Latex Semi-Gloss, B31-600 Series (4 mils wet, 1.6 mils dry per coat).

Semi-Gloss Finish (Low Odor - Zero VOC Finish):

1st Coat: S-W Loxon Acrylic Masonry Primer, A24W8300 (8 mils wet, 3.2 mils dry).

2nd Coat: S-W ProMar 200 Zero VOC Latex Semi-Gloss, B31-2600 Series.

3rd Coat: S-W ProMar 200 Zero VOC Latex Semi-Gloss, B31-2600 Series (4 mils wet, 1.7 mils dry per coat).

Eg-Shel / Satin Finish:

1st Coat: S-W Loxon Acrylic Masonry Primer, A24W8300 (8 mils wet, 3.2 mils dry).

2nd Coat: S-W ProMar 200 Latex Eg-Shel Enamel, B20-2200 Series.

3rd Coat: S-W ProMar 200 Latex Eg-Shel Enamel, B20-2200 Series (4 mils wet, 1.3 mils dry per coat).

Eg-Shel / Satin Finish (Low Odor - Low VOC):

1st Coat: S-W Loxon Acrylic Masonry Primer, A24W8300 (8 mils wet, 3.2 mils dry).

2nd Coat: S-W ProGreen 200 Interior Latex Eg-shel, B20-600 Series.

3rd Coat: S-W ProGreen 200 Interior Latex Eg-shel, B20-600 Series (4 mils wet, 1.6 mils dry per coat).

Eg-Shel / Satin Finish (Low Odor - Zero VOC Finish):

1st Coat: S-W Loxon Acrylic Masonry Primer, A24W8300 (8 mils wet, 3.2 mils dry).

2nd Coat: S-W ProMar 200 Zero VOC Latex Eg-Shel, B20-2600 Series.

3rd Coat: S-W ProMar 200 Zero VOC Latex Eg-Shel, B20-2600 Series (4 mils wet, 1.6 mils dry per coat).

Low Sheen Finish:

1st Coat: S-W Loxon Acrylic Masonry Primer, A24W8300 (8 mils wet, 3.2 mils dry).

2nd Coat: S-W ProMar 200 Zero VOC Latex Low Sheen Enamel, B24-2600 Series.

3rd Coat: S-W ProMar 200 Zero VOC Latex Low Sheen Enamel, B24-2600 Series (4 mils wet, 1.7 mils dry per coat).

Flat Finish:

1st Coat: S-W Loxon Acrylic Masonry Primer, A24W8300 (8 mils wet, 3.2 mils dry).

2nd Coat: S-W ProMar 200 Latex Flat Wall Paint, B30-200 Series.

3rd Coat: S-W ProMar 200 Latex Flat Wall Paint, B30-200 Series (4 mils wet, 1.4 mils dry per coat).

Flat Finish (Low Odor - Low VOC):

1st Coat: S-W Loxon Acrylic Masonry Primer, A24W8300 (8 mils wet, 3.2 mils dry).

2nd Coat: S-W ProGreen 200 Interior Latex Flat, B30-600 Series.

3rd Coat: S-W ProGreen 200 Interior Latex Flat, B30-600 Series (4 mils wet, 1.8 mils dry per coat).

Flat Finish (Low Odor - Zero VOC Finish):

1st Coat: S-W Loxon Acrylic Masonry Primer, A24W8300 (8 mils wet, 3.2 mils dry).

2nd Coat: S-W ProMar 200 Zero VOC Latex Flat, B30-2600 Series.

3rd Coat: S-W ProMar 200 Zero VOC Latex Flat, B30-2600 Series (4 mils wet, 1.6 mils dry per coat).

Alkyd Systems:

Concrete Stain (Water Base):

CONCRETE FLOORS:

MASONRY: CMU - Concrete, Split, Scored, Smooth, Fluted.

Latex Systems:

Gloss Finish:

1st Coat: S-W PrepRite Block Filler, B25W25 (75-125 sq ft/gal).

2nd Coat: S-W ProMar 200 Latex Gloss B21-200 Series.

3rd Coat: S-W ProMar 200 Latex Gloss B21-200 Series (4 mils wet, 1.5 mils dry per coat).

Semi-Gloss Finish:

1st Coat: S-W PrepRite Block Filler, B25W25 (75-125 sq ft/gal).

2nd Coat: S-W ProMar 200 Latex Semi-Gloss, B31-2200 Series.

3rd Coat: S-W ProMar 200 Latex Semi-Gloss, B31-2200 Series (4 mils wet, 1.3 mils dry per coat).

Semi-Gloss Finish (Low Odor - Low VOC):

1st Coat: S-W PrepRite Block Filler, B25W25 (75-125 sq ft/gal).

2nd Coat: S-W ProGreen 200 Interior Latex Semi-Gloss, B31-600 Series.

3rd Coat: S-W ProGreen 200 Interior Latex Semi-Gloss, B31-600 Series (4 mils wet, 1.6 mils dry per coat).

Semi-Gloss Finish (Low Odor - Zero VOC Finish):

1st Coat: S-W PrepRite Block Filler, B25W25 (75-125 sq ft/gal).

2nd Coat: S-W ProMar 200 Zero VOC Latex Semi-Gloss, B31-2600 Series.

3rd Coat: S-W ProMar 200 Zero VOC Latex Semi-Gloss, B31-2600 Series (4 mils wet, 1.7 mils dry per coat).

Eg-Shel / Satin Finish:

1st Coat: S-W PrepRite Block Filler, B25W25 (75-125 sq ft/gal).

2nd Coat: S-W ProMar 200 Latex Eg-Shel, B20-2200 Series.

3rd Coat: S-W ProMar 200 Latex Eg-Shel, B20-2200 Series (4 mils wet, 1.6 mils dry per coat).

Eg-Shel / Satin Finish (Low Odor - Low VOC):

1st Coat: S-W PrepRite Block Filler, B25W25 (75-125 sq ft/gal).

2nd Coat: S-W ProGreen 200 Interior Latex Eg-Shel, B20W651.

3rd Coat: S-W ProGreen 200 Interior Latex Eg-Shel, B20W651 (4 mils wet, 1.6 mils dry per coat).

Eg-Shel / Satin Finish (Low Odor - Zero VOC Finish):

1st Coat: S-W PrepRite Block Filler, B25W25 (75-125 sq ft/gal).

2nd Coat: S-W ProMar 200 Zero VOC Latex Eg-Shel, B20-2600 Series.

3rd Coat: S-W ProMar 200 Zero VOC Latex Eg-Shel, B20-2600 Series (4 mils wet, 1.6 mils dry per coat).

Low Sheen Finish:

1st Coat: S-W PrepRite Block Filler, B25W25 (75-125 sq ft/gal).

2nd Coat: S-W ProMar 200 Zero VOC Latex Low Sheen Enamel, B24-2600 Series.

3rd Coat: S-W ProMar 200 Zero VOC Latex Low Sheen Enamel, B24-2600 Series (4 mils wet, 1.7 mils dry per coat).

Flat Finish:

1st Coat: S-W PrepRite Block Filler, B25W25 (75-125 sq ft/gal).

2nd Coat: S-W ProMar 200 Latex Flat, B30-200 Series.

3rd Coat: S-W ProMar 200 Latex Flat, B30-200 Series (4 mils wet, 1.4 mils dry per coat).

Flat Finish (Low Odor - Low VOC):

1st Coat: S-W PrepRite Block Filler, B25W25 (75-125 sq ft/gal).

2nd Coat: S-W ProGreen 200 Interior Latex Flat, B30-600 Series.

3rd Coat: S-W ProGreen 200 Interior Latex Flat, B30-600 Series (4 mils wet, 1.8 mils dry per coat).

Flat Finish (Low Odor - Zero VOC Finish):

1st Coat: S-W PrepRite Block Filler, B25W25 (75-125 sq ft/gal).

2nd Coat: S-W ProMar 200 Zero VOC Latex Flat, B30-2600 Series.

3rd Coat: S-W ProMar 200 Zero VOC Latex Flat, B30-2600 Series (4 mils wet, 1.6 mils dry per coat).

Alkyd Systems:

Concrete Stain (Water Base):

METAL: Aluminum, Galvanized.

Note: For Higher Performance Systems refer to 09960.

Latex Systems:

Gloss Finish:

1st Coat: S-W Pro Industrial Pro-Cryl Primer, B66-310 Series (2-4 mils dry).

2nd Coat: S-W ProMar 200 Latex Gloss Enamel, B21-200 Series.

3rd Coat: S-W ProMar 200 Latex Gloss Enamel, B21-200 Series (4 mils wet, 1.5 mils dry per coat).

Semi-Gloss Finish:

1st Coat: S-W Pro Industrial Pro-Cryl Primer, B66-310 Series (2-4 mils dry).

2nd Coat: S-W ProMar 200 Latex Semi-Gloss, B31-2200 Series.

3rd Coat: S-W ProMar 200 Latex Semi-Gloss, B31-2200 Series (4 mils wet, 1.3 mils dry per coat).

Semi-Gloss Block Resistant Finish:

1st Coat: S-W Pro Industrial Pro-Cryl Primer, B66-310 Series (2-4 mils dry).

2nd Coat: S-W ProClassic Waterborne Acrylic Semi-Gloss Enamel, B31 Series.

3rd Coat: S-W ProClassic Waterborne Acrylic Semi-Gloss Enamel, B31 Series (4 mils wet, 1.3 mils dry per coat).

Semi-Gloss (Low Odor/Lower VOC):

1st Coat: S-W Pro Industrial Pro-Cryl Primer, B66-310 Series (2-4 mils dry).

2nd Coat: S-W ProGreen 200 Interior Latex Semi-Gloss, B31-600 Series.

3rd Coat: S-W ProGreen 200 Interior Latex Semi-Gloss, B31-600 Series (4 mils wet, 1.6 mils dry per coat).

Semi-Gloss (Low Odor - Zero VOC Finish):

1st Coat: S-W Pro Industrial Pro-Cryl Primer, B66-310 Series (2-4 mils dry).

2nd Coat: S-W ProMar 200 Zero VOC Latex Semi-Gloss, B31-2600 Series.

3rd Coat: S-W ProMar 200 Zero VOC Latex Semi-Gloss, B31-2600 Series (4 mils wet, 1.7 mils dry per coat).

Eg-Shel / Satin Finish:

1st Coat: S-W Pro Industrial Pro-Cryl Primer, B66-310 Series (2-4 mils dry).

2nd Coat: S-W ProMar 200 Latex Eg-Shel, B20-2200 Series.

3rd Coat: S-W ProMar 200 Latex Eg-Shel, B20-2200 Series (4 mils wet, 1.5 mils dry per coat).

Eg-Shel / Satin Finish (Low Odor/Lower VOC):

1st Coat: S-W Pro Industrial Pro-Cryl Primer, B66-310 Series (2-4 mils dry).

2nd Coat: S-W ProGreen 200 Interior Latex Eg-Shel, B20W651.

3rd Coat: S-W ProGreen 200 Interior Latex Eg-Shel, B20W65 (4 mils wet, 1.6 mils dry per coat).

Eg-Shel / Satin Finish (Low Odor - Zero VOC Finish):

1st Coat: S-W Pro Industrial Pro-Cryl Primer, B66-310 Series (2-4 mils dry).

2nd Coat: S-W ProMar 200 Zero VOC Latex Eg-Shel, B20-2600 Series.

3rd Coat: S-W ProMar 200 Zero VOC Latex Eg-Shel, B20-2600 Series (4 mils wet, 1.6 mils dry per coat).

Low Sheen Finish:

1st Coat: S-W Pro Industrial Pro-Cryl Primer, B66-310 Series (2-4 mils dry).

2nd Coat: S-W ProMar 200 Zero VOC Latex Low Sheen Enamel, B24-2600 Series.

3rd Coat: S-W ProMar 200 Zero VOC Latex Low Sheen Enamel, B24-2600 Series (4 mils wet, 1.7 mils dry per coat).

Flat Finish:

1st Coat: S-W Pro Industrial Pro-Cryl Primer, B66-310 Series (2-4 mils dry).

2nd Coat: S-W ProMar 200 Latex Flat, B30-200 Series.

3rd Coat: S-W ProMar 200 Latex Flat, B30-200 Series (4 mils wet, 1.4 mils dry per coat).

Flat Finish (Low Odor/Lower VOC):

1st Coat: S-W Pro Industrial Pro-Cryl Primer, B66-310 Series (2-4 mils dry).

2nd Coat: S-W ProGreen 200 Interior Latex Flat, B30W651.

3rd Coat: S-W ProGreen 200 Interior Latex Flat, B30W651 (4 mils wet, 1.8 mils dry per coat).

Flat Finish (Low Odor - Zero VOC Finish):

1st Coat: S-W Pro Industrial Pro-Cryl Primer, B66-310 Series (2-4 mils dry).

2nd Coat: S-W ProMar 200 Zero VOC Latex Flat, B30-2600 Series.

3rd Coat: S-W ProMar 200 Zero VOC Latex Flat, B30-2600 Series (4 mils wet, 1.6 mils dry per coat).

Alkyd Systems:

Dryfall Waterborne Topcoats:

METAL, Steel: (Structural Steel Columns, Joists, Trusses, Beams, Miscellaneous and Ornamental Iron, Structural Iron, Ferrous Metal).

Note: For Hi Performance Pro Industrial Systems refer to 09960.

Latex Systems:

Gloss Finish:

1st Coat: S-W Pro Industrial Pro-Cryl Primer, B66-310 Series (2-4 mils dry).

2nd Coat: S-W ProMar 200 Latex Gloss, B21-200 Series.

3rd Coat: S-W ProMar 200 Latex Gloss, B21-200 Series (4 mils wet, 1.5 mils dry per coat).

Semi-Gloss Finish:

1st Coat: S-W Pro Industrial Pro-Cryl Primer, B66-310 Series (2-4 mils dry).

2nd Coat: S-W ProMar 200 Latex Semi-Gloss, B31-2200 Series.

3rd Coat: S-W ProMar 200 Latex Semi-Gloss, B31-2200 Series (4 mils wet, 1.3 mils dry per coat).

Semi-Gloss Block Resistant Finish:

1st Coat: S-W Pro Industrial Pro-Cryl Primer, B66-310 Series (2-4 mils dry).

2nd Coat: S-W ProClassic Waterborne Acrylic Semi-Gloss Enamel, B31 Series.

3rd Coat: S-W ProClassic Waterborne Acrylic Semi-Gloss Enamel, B31 Series (4 mils wet, 1.3 mils dry per coat).

Semi-Gloss Finish (Low Odor/Lower VOC):

1st Coat: S-W Pro Industrial Pro-Cryl Primer, B66-310 Series (2-4 mils dry).

2nd Coat: S-W ProGreen 200 Interior Latex Semi-Gloss, B31-600 Series.

3rd Coat: S-W ProGreen 200 Interior Latex Semi-Gloss, B31-600 Series (4 mils wet, 1.6 mils dry per coat).

Semi-Gloss Finish (Low Odor - Zero VOC Finish):

1st Coat: S-W Pro Industrial Pro-Cryl Primer, B66-310 Series (2-4 mils dry).

2nd Coat: S-W ProMar 200 Zero VOC Latex Semi-Gloss, B31-2600 Series.

3rd Coat: S-W ProMar 200 Zero VOC Latex Semi-Gloss, B31-2600 Series (4 mils wet, 1.7 mils dry per coat).

Eg-Shel / Satin Finish:

1st Coat: S-W Pro Industrial Pro-Cryl Primer, B66-310 Series (2-4 mils dry).

2nd Coat: S-W ProMar 200 Latex Eg-Shel, B20-2200 Series.

3rd Coat: S-W ProMar 200 Latex Eg-Shel, B20-2200 Series (4 mils wet, 1.5 mils dry per coat).

Eg-Shel / Satin Finish (Low Odor/Lower VOC):

1st Coat: S-W Pro Industrial Pro-Cryl Primer, B66-310 Series (2-4 mils dry).

2nd Coat: S-W ProGreen 200 Interior Latex Eg-Shel, B20W651.

3rd Coat: S-W ProGreen 200 Interior Latex Eg-Shel, B20W651 (4 mils wet, 1.6 mils dry per coat).

Eg-Shel / Satin Finish (Low Odor - Zero VOC Finish):

1st Coat: S-W Pro Industrial Pro-Cryl Primer, B66-310 Series (2-4 mils dry).

2nd Coat: S-W ProMar 200 Zero VOC Latex Eg-Shel, B20-2600 Series.

3rd Coat: S-W ProMar 200 Zero VOC Latex Eg-Shel, B20-2600 Series (4 mils wet, 1.6 mils dry per coat).

Low Sheen Finish:

1st Coat: S-W Pro Industrial Pro-Cryl Primer, B66-310 Series (2-4 mils dry).

2nd Coat: S-W ProMar 200 Zero VOC Latex Low Sheen Enamel, B24-2600 Series.

3rd Coat: S-W ProMar 200 Zero VOC Latex Low Sheen Enamel, B24-2600 Series (4 mils wet, 1.7 mils dry per coat).

Flat Finish:

1st Coat: S-W Pro Industrial Pro-Cryl Primer, B66-310 Series (2-4 mils dry).

2nd Coat: S-W ProMar 200 Latex Flat, B30-200 Series.

3rd Coat: S-W ProMar 200 Latex Flat, B30-200 Series (4 mils wet, 1.4 mils dry).

Flat Finish (Low Odor/Lower VOC):

1st Coat: S-W Pro Industrial Pro-Cryl Primer, B66-310 Series (2-4 mils dry).

2nd Coat: S-W ProGreen 200 Interior Latex Flat, B30W651.

3rd Coat: S-W ProGreen 200 Interior Latex Flat, B30W651 (4 mils wet, 1.8 mils dry per coat).

Flat Finish (Low Odor - Zero VOC Finish):

1st Coat: S-W Pro Industrial Pro-Cryl Primer, B66-310 Series (2-4 mils dry).

2nd Coat: S-W ProMar 200 Zero VOC Latex Flat, B30-2600 Series.

3rd Coat: S-W ProMar 200 Zero VOC Latex Flat, B30-2600 Series (4 mils wet, 1.6 mils dry per coat).

Alkyd Systems:

Dryfall Waterborne Topcoats:

WOOD: Walls, Ceilings, Doors, Trim.

Latex Systems:

High Gloss Finish:

1st Coat: S-W Premium Wall and Wood Primer, B28W8111 (4 mils wet, 1.8 mils dry).

2nd Coat: S-W ProClassic Waterborne Acrylic High Gloss Enamel, B21W351 Series.

3rd Coat: S-W ProClassic Waterborne Acrylic High Gloss Enamel, B21W351 Series (4 mils wet, 1.5 mils dry per coat).

Gloss Finish:

1st Coat: S-W PrepRite ProBlock Latex. B51 Series (4 mils wet, 1.4 mils dry).

2nd Coat: S-W ProMar 200 Latex Gloss, B21-200 Series.

3rd Coat: S-W ProMar 200 Latex Gloss, B21-200 Series (4 mils wet, 1.5 mils dry per coat).

Gloss Finish - Alternate:

1st Coat: S-W Premium Wall and Wood Primer, B28W8111 (4 mils wet, 1.8 mils dry).

2nd Coat: S-W ProClassic Waterborne Acrylic Gloss Enamel, B21 Series.

3rd Coat: S-W ProClassic Waterborne Acrylic Gloss Enamel, B21 Series (4 mils wet, 1.3 mils dry per coat).

Semi-Gloss Finish:

1st Coat: S-W PrepRite ProBlock Latex. B51 Series (4 mils wet, 1.4 mils dry).

2nd Coat: S-W ProMar 200 Latex Semi-Gloss, B31-2200 Series.

3rd Coat: S-W ProMar 200 Latex Semi-Gloss, B31-2200 Series (4 mils wet, 1.3 mils dry per coat).

Semi-Gloss Block Resistant Finish:

1st Coat: S-W Premium Wall and Wood Primer, B28W8111 (4 mils wet, 1.8 mils dry).

2nd Coat: S-W ProClassic Waterborne Acrylic Semi-Gloss Enamel, B31 Series.

3rd Coat: S-W ProClassic Waterborne Acrylic Semi-Gloss Enamel, B31 Series (4 mils wet, 1.3 mils dry per coat).

Semi-Gloss (Low Odor - Low VOC):

1st Coat: S-W PrepRite ProBlock Latex. B51 Series (4 mils wet, 1.4 mils dry).

2nd Coat: S-W ProGreen 200 Interior Latex Semi-Gloss, B31-600 Series.

3rd Coat: S-W ProGreen 200 Interior Latex Semi-Gloss, B31-600 Series (4 mils wet, 1.6 mils dry per coat).

Semi-Gloss (Low Odor - Zero VOC Finish):

1st Coat: S-W Premium Wall and Wood Primer, B28W8111 (4 mils wet, 1.8 mils dry).

2nd Coat: S-W ProMar 200 Zero VOC Latex Semi-Gloss, B31-2600 Series.

3rd Coat: S-W ProMar 200 Zero VOC Latex Semi-Gloss, B31-2600 Series (4 mils wet, 1.7 mils dry per coat).

Eg-Shel / Satin Finish:

1st Coat: S-W PrepRite ProBlock Latex. B51 Series (4 mils wet, 1.4 mils dry).

2nd Coat: S-W ProMar 200 Latex Eg-Shel, B20-2200 Series.

3rd Coat: S-W ProMar 200 Latex Eg-Shel, B20-2200 Series (4 mils wet, 1.5 mils dry per coat).

Eg-Shel / Satin Finish - Alternate:

1st Coat: S-W Premium Wall and Wood Primer, B28W8111 (4 mils wet, 1.8 mils dry).

2nd Coat: S-W ProClassic Waterborne Satin, B20 Series.

3rd Coat: S-W ProClassic Waterborne Satin, B20 Series (4 mils wet, 1.3 mils dry per coat).

Eg-Shel / Satin Finish (Low Odor - Low VOC):

1st Coat: S-W PrepRite ProBlock Latex. B51 Series (4 mils wet, 1.4 mils dry).

2nd Coat: S-W ProGreen 200 Interior Latex Eg-Shel, B20W651.

3rd Coat: S-W ProGreen 200 Interior Latex Eg-Shel, B20W651 (4 mils wet, 1.6 mils dry per coat).

Eg-Shel / Satin Finish (Low Odor - Zero VOC Finish):

1st Coat: S-W Premium Wall and Wood Primer, B28W8111 (4 mils wet, 1.8 mils dry).

2nd Coat: S-W ProMar 200 Zero VOC Latex Eg-Shel, B20-2600 Series.

3rd Coat: S-W ProMar 200 Zero VOC Latex Eg-Shel, B20-2600 Series (4 mils wet, 1.6 mils dry per coat).

Eg-Shel / Satin Finish (Low Odor - Zero VOC Finish):

1st Coat: S-W Premium Wall and Wood Primer, B28W8111 (4 mils wet, 1.8 mils dry).

2nd Coat: S-W ProMar 200 Zero VOC Latex Low Sheen Enamel, B24-2600 Series.

3rd Coat: S-W ProMar 200 Zero VOC Latex Low Sheen Enamel, B24-2600 Series (4 mils wet, 1.7 mils dry per coat).

Flat Finish:

1st Coat: S-W PrepRite ProBlock Latex. B51 Series (4 mils wet, 1.4 mils dry).

2nd Coat: S-W ProMar 200 Latex Flat, B30-200 Series.

3rd Coat: S-W ProMar 200 Latex Flat, B30-200 Series (4 mils wet, 1.4 mils dry per coat).

Flat Finish (Low Odor - Low VOC):

1st Coat: S-W PrepRite ProBlock Latex. B51 Series (4 mils wet, 1.4 mils dry).

2nd Coat: S-W ProGreen 200 Interior Latex Flat, B30W651.

3rd Coat: S-W ProGreen 200 Interior Latex Flat, B30W651 (4 mils wet, 1.8 mils dry per coat).

Flat Finish (Low Odor - Zero VOC Finish):

1st Coat: S-W Premium Wall and Wood Primer, B28W8111 (4 mils wet, 1.8 mils dry).

2nd Coat: S-W ProMar 200 Zero VOC Latex Flat, B30-2600 Series.

3rd Coat: S-W ProMar 200 Zero VOC Latex Flat, B30-2600 Series (4 mils wet, 1.6 mils dry per coat).

Alkyd Systems:

Stain and Varnish:

WOOD: Floors-Painted or Stained and Varnished.

DRYWALL: (Walls, Ceilings, Gypsum Board, Plaster Board and similar items).

Note: For Hi Performance Pro Industrial Floor systems refer to 09670.

Latex Systems:

Gloss Finish:

1st Coat: S-W ProMar 200 Latex Primer, B28W8200 (4 mils wet, 1.2 mils dry).

2nd Coat: S-W ProMar 200 Latex Gloss, B21-200 Series.

3rd Coat: S-W ProMar 200 Latex Gloss, B21-200 Series (4 mils wet, 1.5 mils dry per coat).

Semi-Gloss Finish:

1st Coat: S-W ProMar 200 Latex Primer, B28W8200 (4 mils wet, 1.2 mils dry).

2nd Coat: S-W ProMar 200 Latex Semi-Gloss, B31-2200 Series.

3rd Coat: S-W ProMar 200 Latex Semi-Gloss, B31-2200 Series (4 mils wet, 1.3 mils dry per coat).

Semi-Gloss Finish (Low Odor - Low VOC):

1st Coat: S-W ProGreen 200 Interior Latex Primer, B28W600 Series (4 mils wet, 1.5 mils dry).

2nd Coat: S-W ProGreen 200 Interior Latex Semi-Gloss, B31-600 Series.

3rd Coat: S-W ProGreen 200 Interior Latex Semi-Gloss, B31-600 Series (4 mils wet, 1.6 mils dry per coat).

Semi-Gloss Finish (Low Odor - Zero VOC):

1st Coat: S-W Harmony Low Odor Interior Latex Primer, B11 (4 mils wet, 1.3 mils dry per coat).

2nd Coat: S-W Harmony Low Odor Interior Latex Semi-Gloss, B10 Series.

3rd Coat: S-W Harmony Low Odor Interior Latex Semi-Gloss, B10 Series (4 mils wet, 1.6 mils dry per coat).

Semi-Gloss Finish (Low Odor - Zero VOC Finish):

1st Coat: S-W ProGreen 200 Interior Latex Primer, B28W600 Series (4 mils wet, 1.5 mils dry).

2nd Coat: S-W ProMar 200 Zero VOC Latex Semi-Gloss, B31-2600 Series.

3rd Coat: S-W ProMar 200 Zero VOC Latex Semi-Gloss, B31-2600 Series (4 mils wet, 1.7 mils dry per coat).

Eg-Shel / Satin Finish:

1st Coat: S-W ProMar 200 Latex Primer, B28W8200 (4 mils wet, 1.2 mils dry).

2nd Coat: S-W ProMar 200 Latex Eg-Shel, B20-2200 Series.

3rd Coat: S-W ProMar 200 Latex Eg-Shel, B20-2200 Series (4 mils wet, 1.6 mils dry per coat).

Eg-Shel / Satin Finish (Low Odor - Low VOC):

1st Coat: S-W ProGreen 200 Interior Latex Primer, B28W600 Series (4 mils wet, 1.5 mils dry).

2nd Coat: S-W ProGreen 200 Interior Latex Eg-shel, B20W651.

3rd Coat: S-W ProGreen 200 Interior Latex Eg-shel, B20W651 (4 mils wet, 1.6 mils dry per coat).

Eg-Shel / Satin Finish (Low Odor - Zero VOC):

1st Coat: S-W Harmony Low Odor Interior Latex Primer, B11 (4 mils wet, 1.3 mils dry per coat).

2nd Coat: S-W Harmony Low Odor Interior Latex Eg-Shel, B9 Series.

3rd Coat: S-W Harmony Low Odor Interior Latex Eg-Shel, B9 Series (4 mils wet, 1.8 mils dry per coat).

Eg-Shel / Satin Finish (Low Odor - Zero VOC Finish):

1st Coat: S-W ProGreen 200 Interior Latex Primer, B28W600 Series (4 mils wet, 1.5 mils dry).

2nd Coat: S-W ProMar 200 Zero VOC Latex Eg-Shel, B20-2600 Series.

3rd Coat: S-W ProMar 200 Zero VOC Latex Eg-Shel, B20-2600 Series (4 mils wet, 1.6 mils dry per coat).

Low Sheen Finish (Low Odor - Zero VOC Finish):

1st Coat: S-W ProGreen 200 Interior Latex Primer, B28W600 Series (4 mils wet, 1.5 mils dry).

2nd Coat: S-W ProMar 200 Zero VOC Latex Low Sheen Enamel, B24-2600 Series.

3rd Coat: S-W ProMar 200 Zero VOC Latex Low Sheen Enamel, B24-2600 Series (4 mils wet, 1.7 mils dry per coat).

Flat Finish:

1st Coat: S-W ProMar 200 Latex Primer, B28W8200 (4 mils wet, 1.2 mils dry).

2nd Coat: S-W ProMar 200 Latex Flat, B30-200 Series.

3rd Coat: S-W ProMar 200 Latex Flat, B30-200 Series (4 mils wet, 1.4 mils dry per coat).

Flat Finish (Low Odor - Low VOC):

1st Coat: S-W ProGreen 200 Interior Latex Primer, B28W600 Series (4 mils wet, 1.5 mils dry).

2nd Coat: S-W ProGreen 200 Interior Latex Flat, B30W651.

3rd Coat: S-W ProGreen 200 Interior Latex Flat, B30W651 (4 mils wet, 1.8 mils dry per coat).

Flat Finish (Low Odor - Zero VOC):

1st Coat: S-W Harmony Low Odor Interior Latex Primer, B11 (4 mils wet, 1.3 mils dry per coat).

2nd Coat: S-W Harmony Low Odor Interior Latex Flat, B5 Series.

3rd Coat: S-W Harmony Low Odor Interior Latex Flat, B5 Series (4 mils wet, 1.8 mils dry per coat).

Flat Finish (Low Odor - Zero VOC Finish):

1st Coat: S-W ProGreen 200 Interior Latex Primer, B28W600 Series (4 mils wet, 1.5 mils dry).

2nd Coat: S-W ProMar 200 Zero VOC Latex Flat, B30-2600 Series.

3rd Coat: S-W ProMar 200 Zero VOC Latex Flat, B30-2600 Series (4 mils wet, 1.6 mils dry per coat).

Alkyd Systems:

HIGH PERFORMANCE INTERIOR PAINT SYSTEMS

CONCRETE: Smooth (Walls and Ceilings, Poured Concrete, Precast Concrete, Unglazed Brick, Cement Board, Tilt-Up, Cast-In-Place).

Latex Systems:

Alkyd System (Water Base).

Alkyd System (Solvent Base Finish):

Epoxy Systems (Water Base):

Epoxy Systems (Solvent Base):

Urethane System (Water Base):

CONCRETE: (Ceilings).

MASONRY: (CMU - Concrete, Split Face, Scored, Smooth, High Density, Low Density, Fluted, Stucco).

Note: For a harder, more moisture resistant epoxy or urethane finish or forareas under heavier
moisture conditions, use Sherwin-Williams Kem Cati-Coat HS epoxy filler/sealer B42W400 Series.

Latex Systems:

Alkyd System (Water Base):

Alkyd System (Solvent Base Finish):

Epoxy System (Water Base):

Epoxy Systems (Solvent Base Finish):

Urethane Systems (Water Base):

Urethane Systems (Solvent Base Finish):

NON-FERROUS: (Galvanized and Aluminum).

Latex Systems:

Alkyd System (Water Base):

Alkyd System (Solvent Base Finish):

Epoxy Systems (Water Base):

Epoxy Systems (Solvent Base):

Urethane Systems (Water Base):

Urethane Systems (Solvent Base):

MultiSurface Acrylic Coating:

Dryfall Waterborne Systems:

Dryfall Alkyd Topcoats:

METAL: (Structural Steel Columns, Joists, Trusses, Beams, Miscellaneous and Ornamental Iron, Structural Iron, Ferrous Metal).

Latex Systems:

Alkyd System (Water Base):

Alkyd System (Solvent Base Finish):

Epoxy Systems (Water Base):

Epoxy System (Solvent Base):

Urethane System (Water Base):

Urethane System (Solvent Base):

METAL: (Ceilings - Structural Steel, Joists, Trusses, Beams).

WOOD: (Doors, Trim, Partitions, Frames).

Latex Systems:

Alkyd System (Water Based):

Alkyd System (Solvent Base Finish):

Epoxy System (Water Base):

Epoxy System (Solvent Base):

DRYWALL: (Walls, Ceilings, Gypsum Board).

Latex Systems:

Alkyd System (Water Base):

Epoxy Systems (Water Base):

Epoxy System (Solvent Base):

PLASTER: (Walls, Ceilings).

Latex Systems:

Epoxy Systems (Water Base):

EXTERIOR PAINT SYSTEMS

CONCRETE: (Cementitious Siding, Flexboard, Transite Board, Shingles (Non-Roof), Common Brick, Stucco, Tilt-up, Precast, and Poured-in-place Cement).

Latex Systems:

Elastomeric System: Not including cementitious siding, Flexboard, Transite board or shingles.

Textured Elastomeric System:

Textured and Smooth Systems:

Stain System:

Clear Water Repellant:

MASONRY: Concrete Masonry Units (CMU)- Cinder or Concrete Block.

Latex Systems:

Elastomeric System:

Textured Elastomeric System:

Textured Masonry System:

Stain System:

Clear Water Repellant:

CONCRETE: Concrete Floors, Patios, Porches, Steps and Platforms.

METAL: Aluminum, Galvanized

METAL: Misc. Iron, Ornamental Iron, Structural Iron and Steel, Ferrous Metal.

WOOD: Decks, Exterior including pressure treated lumber, Floors, Platforms.

WOOD: Siding, Trim, Shutters, Sashes, Hardboard-Bare/Primed.

Latex Systems:

Stain: Water Reducible Systems:

ARCHITECTURAL PVC, PLASTIC, FIBERGLASS

DRYWALL: Gypsum Board, Exterior Drywall.

VINYL SIDING EIFS, SYNTHETIC STUCCO:

LEED NC/CI/CS PAINT SYSTEMS

CONCRETE: (Walls and Ceilings, Poured Concrete, Precast Concrete, Unglazed Brick, Cement Board, Tilt-Up, Cast-In-Place) including PLASTER - (Walls, Ceilings).

Latex Systems:

Gloss Finish:

1st Coat: S-W Loxon Acrylic Masonry Primer, A24W8300 (8 mils wet, 3.2 mils dry).

2nd Coat: S-W ProMar 200 Latex Gloss B21-200 Series.

3rd Coat: S-W ProMar 200 Latex Gloss B21-200 Series (4 mils wet, 1.5 mils dry per coat).

Gloss Finish HI-Performance (Zero VOC):

1st Coat: S-W Loxon Acrylic Masonry Primer, A24W8300 (8 mils wet, 3.2 mils dry).

2nd Coat: S-W Pro Industrial Zero VOC Gloss Acrylic, B66-600 Series.

3rd Coat: S-W Pro Industrial Zero VOC Gloss Acrylic, B66-600 Series (2.5-4 mils dry per coat).

Semi-Gloss Finish (Low Odor - Zero VOC Finish):

1st Coat: S-W Loxon Acrylic Masonry Primer, A24W8300 (8 mils wet, 3.2 mils dry).

2nd Coat: S-W ProMar 200 Zero VOC Latex Semi-Gloss, B31-2600 Series.

3rd Coat: S-W ProMar 200 Zero VOC Latex Semi-Gloss, B31-2600 Series (4 mils wet, 1.7 mils dry per coat).

Semi-Gloss Finish (Low Odor - Zero VOC Finish):

1st Coat: S-W Loxon Acrylic Masonry Primer, A24W8300 (8 mils wet, 3.2 mils dry).

2nd Coat: S-W Harmony Low Odor Interior Latex Semi-Gloss, B10 Series.

3rd Coat: S-W Harmony Low Odor Interior Latex Semi-Gloss, B10 Series (4 mils wet, 1.6 mils dry per coat).

Semi-Gloss Finish (Low Odor - Low VOC):

1st Coat: S-W Loxon Acrylic Masonry Primer, A24W8300 (8 mils wet, 3.2 mils dry).

2nd Coat: S-W ProGreen 200 Semi-Gloss, B31-600 Series.

3rd Coat: S-W ProGreen 200 Semi-Gloss, B31-600 Series (4 mils wet, 1.6 mils dry per coat).

Semi-Gloss Finish HI-Performance (Zero VOC Finish):

1st Coat: S-W Loxon Acrylic Masonry Primer, A24W8300 (8 mils wet, 3.2 mils dry).

2nd Coat: S-W Pro Industrial Zero VOC Semi-Gloss Acrylic, B66-650 Series.

3rd Coat: S-W Pro Industrial Zero VOC Semi-Gloss Acrylic, B66-650 Series (2.5-4 mils dry per coat).

Eg-Shel / Satin Finish (Low Odor - Zero VOC Finish):

1st Coat: S-W Loxon Acrylic Masonry Primer, A24W8300 (8 mils wet, 3.2 mils dry).

2nd Coat: S-W ProMar 200 Zero VOC Latex Eg-Shel, B20-2600 Series.

3rd Coat: S-W ProMar 200 Zero VOC Latex Eg-Shel, B20-2600 Series (4 mils wet, 1.6 mils dry per coat).

Eg-Shel / Satin Finish (Low Odor - Zero VOC Finish):

1st Coat: S-W Loxon Acrylic Masonry Primer, A24W8300 (8 mils wet, 3.2 mils dry).

2nd Coat: S-W Harmony Low Odor Interior Latex Eg-Shel, B9 Series.

3rd Coat: S-W Harmony Low Odor Interior Latex Eg-Shel, B9 Series (4 mils wet, 1.8 mils dry per coat).

Eg-Shel / Satin Finish (Low Odor - Low VOC):

1st Coat: S-W Loxon Acrylic Masonry Primer, A24W8300 (8 mils wet, 3.2 mils dry).

2nd Coat: S-W ProGreen 200 Eg-Shel, B20-650 Series.

3rd Coat: S-W ProGreen 200 Eg-Shel, B20-650 series (4 mils wet, 1.6 mils dry per coat).

Low Sheen Finish (Low Odor - Zero VOC Finish):

1st Coat: S-W Loxon Acrylic Masonry Primer, A24W8300 (8 mils wet, 3.2 mils dry).

2nd Coat: S-W ProMar 200 Zero VOC Latex Low Sheen Enamel, B24-2600 Series.

3rd Coat: S-W ProMar 200 Zero VOC Latex Low Sheen Enamel, B24-2600 Series (4 mils wet, 1.7 mils dry per coat).

Flat Finish (Low Odor - Zero VOC Finish):

1st Coat: S-W Loxon Acrylic Masonry Primer, A24W8300 (8 mils wet, 3.2 mils dry).

2nd Coat: S-W ProMar 200 Zero VOC Latex Flat, B30-2600 Series.

3rd Coat: S-W ProMar 200 Zero VOC Latex Flat, B30-2600 Series (4 mils wet, 1.6 mils dry per coat).

Flat Finish (Low Odor - Zero VOC Finish):

1st Coat: S-W Loxon Acrylic Masonry Primer, A24W8300 (8 mils wet, 3.2 mils dry).

2nd Coat: S-W Harmony Low Odor Interior Latex Flat, B5 Series.

3rd Coat: S-W Harmony Low Odor Interior Latex Flat, B5 Series (4 mils wet, 1.8 mils dry per coat).

Flat Finish (Low Odor - Low VOC):

1st Coat: S-W Loxon Acrylic Masonry Primer, A24W8300 (8 mils wet, 3.2 mils dry).

2nd Coat: S-W ProGreen 200 Flat, B30-600 Series.

3rd Coat: S-W ProGreen 200 Flat, B30-600 Series (4 mils wet, 1.8 mils dry per coat).

Alkyd System:

Epoxy Systems (Water Base):

CONCRETE: Ceilings.

MASONRY, CMU: Concrete, Split Face, Scored, Smooth, High Density, Low Density, Fluted.

Latex Systems:

Gloss Finish:

1st Coat: S-W PrepRite Block Filler, B25W25 (75-125 sq ft/gal).

2nd Coat: S-W ProMar 200 Latex Gloss B21-200 Series.

3rd Coat: S-W ProMar 200 Latex Gloss B21-200 Series (4 mils wet, 1.5 mils dry per coat).

Gloss Finish HI-Performance (Zero VOC Finish):

1st Coat: S-W PrepRite Block Filler, B25W25 (75-125 sq ft/gal).

2nd Coat: S-W Pro Industrial Zero VOC Gloss Acrylic, B66-600 Series.

3rd Coat: S-W Pro Industrial Zero VOC Gloss Acrylic, B66-600 Series (2.5-4 mils dry per coat).

Semi-Gloss Finish (Low Odor - Zero VOC Finish):

1st Coat: S-W PrepRite Block Filler, B25W25 (75-125 sq ft/gal).

2nd Coat: S-W ProMar 200 Zero VOC Latex Semi-Gloss, B31-2600 Series.

3rd Coat: S-W ProMar 200 Zero VOC Latex Semi-Gloss, B31-2600 Series (4 mils wet, 1.7 mils dry per coat).

Semi-Gloss Finish (Low Odor - Zero VOC Finish):

1st Coat: S-W PrepRite Block Filler, B25W25 (75-125 sq ft/gal).

2nd Coat: S-W Harmony Low Odor Interior Latex Semi-Gloss, B10 Series.

3rd Coat: S-W Harmony Low Odor Interior Latex Semi-Gloss, B10 Series (4 mils wet, 1.6 mils dry per coat).

Semi-Gloss Finish (Low Odor - Low VOC):

1st Coat: S-W PrepRite Block Filler, B25W25 (75-125 sq ft/gal).

2nd Coat: S-W ProGreen 200 Semi-Gloss, B31-600 Series.

3rd Coat: S-W ProGreen 200 Semi-Gloss, B31-600 Series (4 mils wet, 1.6 mils dry per coat).

Semi-Gloss Finish HI-Performance (Zero VOC Finish):

1st Coat: S-W PrepRite Block Filler, B25W25 (75-125 sq ft/gal).

2nd Coat: S-W Pro Industrial Zero VOC Semi-Gloss Acrylic, B66-650 Series.

3rd Coat: S-W Pro Industrial Zero VOC Semi-Gloss Acrylic, B66-650 Series (2.5-4 mils dry per coat).

Eg-Shel / Satin Finish (Low Odor - Zero VOC Finish):

1st Coat: S-W PrepRite Block Filler, B25W25 (75-125 sq ft/gal).

2nd Coat: S-W ProMar 200 Zero VOC Latex Eg-Shel, B20-2600 Series.

3rd Coat: S-W ProMar 200 Zero VOC Latex Eg-Shel, B20-2600 Series (4 mils wet, 1.6 mils dry per coat).

Eg-Shel / Satin Finish (Low Odor - Zero VOC Finish):

1st Coat: S-W PrepRite Block Filler, B25W25 (75-125 sq ft/gal).

2nd Coat: S-W Harmony Low Odor Interior Latex Eg-Shel, B9 Series.

3rd Coat: S-W Harmony Low Odor Interior Latex Eg-Shel, B9 Series (4 mils wet, 1.6 mils dry per coat).

Eg-Shel / Satin Finish (Low Odor - Low VOC):

1st Coat: S-W PrepRite Block Filler, B25W25 (75-125 sq ft/gal).

2nd Coat: S-W ProGreen 200 Eg-Shel, B20-650 Series.

3rd Coat: S-W ProGreen 200 Eg-Shel, B20-650 Series (4 mils wet, 1.6 mils dry per coat).

Low Sheen Finish: (Low Odor - Zero VOC Finish):

1st Coat: S-W PrepRite Block Filler, B25W25 (75-125 sq ft/gal).

2nd Coat: S-W ProMar 200 Zero VOC Latex Low Sheen Enamel, B24-2600 Series.

3rd Coat: S-W ProMar 200 Zero VOC Latex Low Sheen Enamel, B24-2600 Series (4 mils wet, 1.7 mils dry per coat).

Flat Finish (Low Odor - Zero VOC Finish):

1st Coat: S-W PrepRite Block Filler, B25W25 (75-125 sq ft/gal).

2nd Coat: S-W ProMar 200 Zero VOC Latex Flat, B30-2600 Series.

3rd Coat: S-W ProMar 200 Zero VOC Latex Flat, B30-2600 Series (4 mils wet, 1.6 mils dry per coat).

Flat Finish (Low Odor - Zero VOC Finish):

1st Coat: S-W PrepRite Block Filler, B25W25 (75-125 sq ft/gal).

2nd Coat: S-W Harmony Low Odor Interior Latex Flat, B5 Series.

3rd Coat: S-W Harmony Low Odor Interior Latex Flat, B5 Series (4 mils wet, 1.6 mils dry per coat).

Flat Finish (Low Odor - Low VOC):

1st Coat: S-W PrepRite Block Filler, B25W25 (75-125 sq ft/gal).

2nd Coat: S-W ProGreen 200 Flat, B30-600 Series.

3rd Coat: S-W ProGreen 200 Flat, B30-600 Series (4 mils wet, 1.8 mils dry per coat).

Alkyd System:

Epoxy System (Water Base):

METAL: Aluminum, Galvanized.

Latex Systems:

Gloss Finish:

1st Coat: S-W Pro Industrial Pro-Cryl Universal Primer, B66-310 Series (5-10 mils wet, 2-4 mils dry).

2nd Coat: S-W ProMar 200 Latex Gloss Enamel, B21-200 Series.

3rd Coat: S-W ProMar 200 Latex Gloss Enamel, B21-200 Series (4 mils wet, 1.5 mils dry per coat).

Gloss Finish HI-Performance (Zero VOC Finish):

1st Coat: S-W Pro Industrial Pro-Cryl Universal Primer, B66-310 Series (5-10 mils wet, 2-4 mils dry).

2nd Coat: S-W Pro Industrial Zero VOC Gloss Acrylic, B66-600 Series.

3rd Coat: S-W Pro Industrial Zero VOC Gloss Acrylic, B66-600 Series (2.5-4 mils dry per coat).

Semi-Gloss Finish:

1st Coat: S-W Pro Industrial Pro-Cryl Universal Primer, B66-310 Series (5-10 mils wet, 2-4 mils dry).

2nd Coat: S-W ProClassic Waterborne Acrylic Semi-Gloss, B31 Series.

3rd Coat: S-W ProClassic Waterborne Acrylic Semi-Gloss, B31 Series (4 mils wet, 1.4 mils dry per coat).

Semi-Gloss Finish (Low Odor - Zero VOC Finish):

1st Coat: S-W Pro Industrial Pro-Cryl Universal Primer, B66-310 Series (5-10 mils wet, 2-4 mils dry).

2nd Coat: S-W ProMar 200 Zero VOC Latex Semi-Gloss, B31-2600 Series.

3rd Coat: S-W ProMar 200 Zero VOC Latex Semi-Gloss, B31-2600 Series (4 mils wet, 1.7 mils dry per coat).

Semi-Gloss Finish HI-Performance (Zero VOC Finish):

1st Coat: S-W Pro Industrial Pro-Cryl Universal Primer, B66-310 Series (5-10 mils wet, 2-4 mils dry).

2nd Coat: S-W Pro Industrial Zero VOC Semi-Gloss Acrylic, B66-650 Series.

3rd Coat: S-W Pro Industrial Zero VOC Semi-Gloss Acrylic, B66-650 Series (2.5-4 mils dry per coat).

Eg-Shel / Satin Finish:

1st Coat: S-W Pro Industrial Pro-Cryl Universal Primer, B66-310 Series (5-10 mils wet, 2-4 mils dry).

2nd Coat: S-W ProClassic Waterborne Acrylic Satin, B20 Series.

3rd Coat: S-W ProClassic Waterborne Acrylic Satin, B20 Series (4 mils wet, 1.4 mils dry per coat).

Eg-Shel / Satin Finish (Low Odor - Zero VOC Finish):

1st Coat: S-W Pro Industrial Pro-Cryl Universal Primer, B66-310 Series (5-10 mils wet, 2-4 mils dry).

2nd Coat: S-W ProMar 200 Zero VOC Latex Eg-Shel, B20-2600 Series.

3rd Coat: S-W ProMar 200 Zero VOC Latex Eg-Shel, B20-2600 Series (4 mils wet, 1.6 mils dry per coat).

Low Sheen Finish (Low Odor - Zero VOC Finish):

1st Coat: S-W Pro Industrial Pro-Cryl Universal Primer, B66-310 Series (5-10 mils wet, 2-4 mils dry).

2nd Coat: S-W ProMar 200 Zero VOC Latex Low Sheen Enamel, B24-2600 Series.

3rd Coat: S-W ProMar 200 Zero VOC Latex Low Sheen Enamel, B24-2600 Series (4 mils wet, 1.7 mils dry per coat).

Flat Finish (Low Odor - Zero VOC):

1st Coat: S-W Pro Industrial Pro-Cryl Universal Primer, B66-310 Series (5-10 mils wet, 2-4 mils dry).

2nd Coat: S-W ProMar 200 Zero VOC Latex Flat, B30-2600 Series.

3rd Coat: S-W ProMar 200 Zero VOC Latex Flat, B30-2600 Series (4 mils wet, 1.6 mils dry per coat).

Flat Finish (Low Odor - Zero VOC Finish):

1st Coat: S-W Pro Industrial Pro-Cryl Universal Primer, B66-310 Series (5-10 mils wet, 2-4 mils dry).

2nd Coat: S-W Harmony Low Odor Interior Latex Flat, B5 Series.

3rd Coat: S-W Harmony Low Odor Interior Latex Flat, B5 Series (4 mils wet, 1.6 mils dry per coat).

Flat Finish (Low Odor - Low VOC):

1st Coat: S-W Pro Industrial Pro-Cryl Universal Primer, B66-310 Series (5-10 mils wet, 2-4 mils dry).

2nd Coat: S-W ProGreen 200 Flat, B30-600 Series.

3rd Coat: S-W ProGreen 200 Flat, B30-600 Series (4 mils wet, 1.8 mils dry per coat).

Alkyd System:

Epoxy System (Water Base):

Urethane System (Water Base):

METAL: Galvanized; Ceilings, Duct work.

METAL: (Structural Steel Columns, Joists, Trusses, Beams, Miscellaneous and Ornamental Iron, Structural Iron, Ferrous Metal).

Note: Primers in this case are optional if the Ceilings - Structural Steel, Joists, Trusses, Beams are already primed. Check for
adhesion and compatibility prior to painting. Spot prime any bare areas with Pro Industrial Pro-Cryl Universal Primer, B66-310 Series.

Latex Systems:

Gloss Finish:

1st Coat: S-W Pro Industrial Pro-Cryl Universal Primer, B66-310 Series (5-10 mils wet, 2-4 mils dry).

2nd Coat: S-W ProClassic Waterborne Acrylic Gloss, B21-51 Series.

3rd Coat: S-W ProClassic Waterborne Acrylic Gloss, B21-51 Series (4 mils wet, 1.6 mils dry per coat).

HI-Performance - Zero VOC Finish:

1st Coat: S-W Pro Industrial Pro-Cryl Universal Primer, B66-310 Series (5-10 mils wet, 2-4 mils dry).

2nd Coat: S-W Pro Industrial Zero VOC Gloss Acrylic, B66-600 Series.

3rd Coat: S-W Pro Industrial Zero VOC Gloss Acrylic, B66-600 Series (2.5-4 mils dry per coat).

Semi-Gloss Finish:

1st Coat: S-W Pro Industrial Pro-Cryl Universal Primer, B66-310 Series (5-10 mils wet, 2-4 mils dry).

2nd Coat: S-W ProClassic Waterborne Acrylic Semi-Gloss, B31 Series.

3rd Coat: S-W ProClassic Waterborne Acrylic Semi-Gloss, B31 Series (4 mils wet, 1.4 mils dry per coat).

Semi-Gloss Finish (Low Odor - Zero VOC Finish):

1st Coat: S-W Pro Industrial Pro-Cryl Universal Primer, B66-310 Series (5-10 mils wet, 2-4 mils dry).

2nd Coat: S-W ProMar 200 Zero VOC Latex Semi-Gloss, B31-2600 Series.

3rd Coat: S-W ProMar 200 Zero VOC Latex Semi-Gloss, B31-2600 Series (4 mils wet, 1.7 mils dry per coat).

Semi-Gloss Finish HI-Performance (Zero VOC Finish):

1st Coat: S-W Pro Industrial Pro-Cryl Universal Primer, B66-310 Series (5-10 mils wet, 2-4 mils dry).

2nd Coat: S-W Pro Industrial Zero VOC Semi-Gloss Acrylic, B66-650 Series.

3rd Coat: S-W Pro Industrial Zero VOC Semi-Gloss Acrylic, B66-650 Series (2.5-4 mils dry per coat).

Eg-Shel / Satin Finish:

1st Coat: S-W Pro Industrial Pro-Cryl Universal Primer, B66-310 Series (5-10 mils wet, 2-4 mils dry).

2nd Coat: S-W ProClassic Waterborne Acrylic Satin, B20 Series.

3rd Coat: S-W ProClassic Waterborne Acrylic Satin, B20 Series (4 mils wet, 1.4 mils dry per coat).

Eg-Shel / Satin Finish (Low Odor - Zero VOC Finish):

1st Coat: S-W Pro Industrial Pro-Cryl Universal Primer, B66-310 Series (5-10 mils wet, 2-4 mils dry).

2nd Coat: S-W ProMar 200 Zero VOC Latex Eg-Shel, B20-2600 Series.

3rd Coat: S-W ProMar 200 Zero VOC Latex Eg-Shel, B20-2600 Series (4 mils wet, 1.6 mils dry per coat).

Eg-Shel / Satin Finish (Low Odor - Low VOC):

1st Coat: S-W Pro Industrial Pro-Cryl Universal Primer, B66-310 Series (5-10 mils wet, 2-4 mils dry).

2nd Coat: S-W ProGreen 200 Eg-Shel, B20-650 Series.

3rd Coat: S-W ProGreen 200 Eg-Shel, B20-650 Series (4 mils wet, 1.6 mils dry per coat).

Eg-Shel / Satin Finish HI-Performance (Zero VOC Finish).

1st Coat: S-W Pro Industrial Pro-Cryl Universal Primer, B66-310 Series (5-10 mils wet, 2-4 mils dry).

2nd Coat: S-W Pro Industrial Zero VOC Satin Acrylic B66-660 Series.

3rd Coat: S-W Pro Industrial Zero VOC Satin Acrylic B66-660 Series (2.5 - 4.0 mils dry per coat).

Low Sheen Finish(Low Odor - Zero VOC Finish):

1st Coat: S-W Pro Industrial Pro-Cryl Primer, B66-310 Series (2-4 mils dry).

2nd Coat: S-W ProMar 200 Zero VOC Latex Low Sheen Enamel, B24-2600 Series.

3rd Coat: S-W ProMar 200 Zero VOC Latex Low Sheen Enamel, B24-2600 Series (4 mils wet, 1.7 mils dry per coat).

Flat Finish (Low Odor - Zero VOC Finish):

1st Coat: S-W Pro Industrial Pro-Cryl Primer, B66-310 Series (2-4 mils dry).

2nd Coat: S-W ProMar 200 Zero VOC Latex Flat, B30-2600 Series.

3rd Coat: S-W ProMar 200 Zero VOC Latex Flat, B30-2600 Series (4 mils wet, 1.6 mils dry per coat).

Flat Finish (Low Odor - Zero VOC Finish):

1st Coat: S-W Pro Industrial Pro-Cryl Universal Primer, B66-310 Series (5-10 mils wet, 2-4 mils dry).

2nd Coat: S-W Harmony Low Odor Interior Latex Flat, B5 Series.

3rd Coat: S-W Harmony Low Odor Interior Latex Flat, B5 Series (4 mils wet, 1.6 mils dry per coat).

Flat Finish (Low Odor - Low VOC):

1st Coat: S-W Pro Industrial Pro-Cryl Universal Primer, B66-310 Series (5-10 mils wet, 2-4 mils dry).

2nd Coat: S-W ProGreen 200 Flat, B30-600 Series.

3rd Coat: S-W ProGreen 200 Flat, B30-600 Series (4 mils wet, 1.8 mils dry per coat).

Alkyd System:

Epoxy System (Water Base):

Urethane System (Water Base):

Dryfall Waterborne Topcoats:

WOOD: (Walls, Ceilings, Doors, Trim).

Latex Systems:

Alkyd System:

Stain and Varnish System:

DRYWALL: (Walls, Ceilings, Gypsum Board and similar items).

Latex Systems:

Semi-Gloss Finish (Low Odor - Zero VOC Finish):

1st Coat: S-W ProGreen 200 Interior Latex Primer, B28W600 Series (4 mils wet, 1.5 mils dry).

2nd Coat: S-W ProMar 200 Zero VOC Latex Semi-Gloss, B31-2600 Series.

3rd Coat: S-W ProMar 200 Zero VOC Latex Semi-Gloss, B31-2600 Series (4 mils wet, 1.7 mils dry per coat).

Semi-Gloss Finish (Low Odor - Zero VOC):

1st Coat: S-W Harmony Low Odor Interior Latex Primer, B11 (4 mils wet, 1.3 mils dry).

2nd Coat: S-W Harmony Low Odor Interior Latex Semi-Gloss, B10 Series.

3rd Coat: S-W Harmony Low Odor Interior Latex Semi-Gloss, B10 Series (4 mils wet, 1.6 mils dry per coat).

Semi-Gloss Finish (Low Odor - Low VOC):

1st Coat: S-W ProGreen 200 Interior Latex Primer, B28W600 (4 mils wet, 1.5 mils dry).

2nd Coat: S-W ProGreen 200 Semi-Gloss, B31-600 Series.

3rd Coat: S-W ProGreen 200 Semi-Gloss, B31-600 Series (4 mils wet, 1.6 mils dry per coat).

Eg-Shel / Satin Finish (Low Odor - Zero VOC Finish):

1st Coat: S-W ProGreen 200 Interior Latex Primer, B28W600 Series (4 mils wet, 1.5 mils dry).

2nd Coat: S-W ProMar 200 Zero VOC Latex Eg-Shel, B20-2600 Series.

3rd Coat: S-W ProMar 200 Zero VOC Latex Eg-Shel, B20-2600 Series (4 mils wet, 1.6 mils dry per coat).

Eg-Shel / Satin Finish (Low Odor - Zero VOC):

1st Coat: S-W Harmony Low Odor Interior Latex Primer, B11 (4 mils wet, 1.3 mils dry).

2nd Coat: S-W Harmony Low Odor Interior Latex Eg-Shel, B9 Series.

3rd Coat: S-W Harmony Low Odor Interior Latex Eg-Shel, B9 Series (4 mils wet, 1.6 mils dry per coat).

Eg-Shel / Satin Finish (Low Odor - Low VOC):

1st Coat: S-W ProGreen 200 Interior Latex Primer, B28W600 (4 mils wet, 1.5 mils dry).

2nd Coat: S-W ProGreen 200 Eg-Shel, B20-650 Series.

3rd Coat: S-W ProGreen 200 Eg-Shel, B20-650 Series (4 mils wet, 1.6 mils dry per coat).

Low Sheen Finish (Low Odor - Zero VOC Finish):

1st Coat: S-W ProGreen 200 Interior Latex Primer, B28W600 Series (4 mils wet, 1.5 mils dry).

2nd Coat: S-W ProMar 200 Zero VOC Latex Low Sheen Enamel, B24-2600 Series.

3rd Coat: S-W ProMar 200 Zero VOC Latex Low Sheen Enamel, B24-2600 Series (4 mils wet, 1.7 mils dry per coat).

Flat Finish (Low Odor - Zero VOC Finish):

1st Coat: S-W ProGreen 200 Interior Latex Primer, B28W600 Series (4 mils wet, 1.5 mils dry).

2nd Coat: S-W ProMar 200 Zero VOC Latex Flat, B30-2600 Series.

3rd Coat: S-W ProMar 200 Zero VOC Latex Flat, B30-2600 Series (4 mils wet, 1.6 mils dry per coat).

Flat Finish (Low Odor - Zero VOC):

1st Coat: S-W Harmony Low Odor Interior Latex Primer, B11 (4 mils wet, 1.3 mils dry).

2nd Coat: S-W Harmony Low Odor Interior Latex Flat, B5 Series.

3rd Coat: S-W Harmony Low Odor Interior Latex Flat, B5 Series (4 mils wet, 1.6 mils dry per coat).

Flat Finish (Low Odor - Low VOC):

1st Coat: S-W ProGreen 200 Interior Latex Primer, B28W600 (4 mils wet, 1.5 mils dry).

2nd Coat: S-W ProGreen 200 Flat, B30-600 Series.

3rd Coat: S-W ProGreen 200 Flat, B30-600 Series (4 mils wet, 1.8 mils dry per coat).

Epoxy System (Water Base):

CONCRETE: (Floors).

2. When you are finished making selections:

Generate Spec:

Word

WP or

RTF