 |  | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | | Glass available up to 13 feet (3962 mm) tall. |
| | | | | Glass Panel Construction and STC Rating: Nominal 4 inch (102 mm) thick in width and height as required. Horizontal and vertical framing members shall be fabricated from aluminum extrusions and mechanically fastened. Frame shall be designed to minimize exposure on face of panels. |
| | | | | Panel Faces: 5/16 inch (8 mm) glass on one face and 3/8-inch (10 mm) glass on the other face, mechanically fastened and sealed in frame. |
| | | | | | | Appearance: |
| | | | | | Blinds: |
| | | | | | Fabrication: Clear anodized aluminum slats suspended on nylon ladders. |
| | | | | | Installation: Install between panes of glass. |
| | | | | | Operation: Raising and tilt of slats shall be electrically operated. All blinds in an operable partition shall operate in unison. |
| | | | | | Control: Key switch. |
| | | | Non-glass available up to 29 feet- 5 inches (8966 mm) tall. |
| | | | | Solid (Non-Glass) Panels: Horizontal and vertical framing members shall be fabricated from aluminum extrusions and mechanically fastened. Frame shall be designed to minimize exposure on face of panels. |
| | | | | Panel Faces: 3/8-inch (10 mm) thick medium density fiberboard continuously bonded to aluminum panel frame. |
| | | | | | Panel Finish: |
| | | | | | | | High Pressure Plastic Laminate |
| | | | | | | | Flame Spread: |
| | | | | | | | Color and Pattern: |
| | | | | | | | Wood Veneer: |
| | | | | | | | Veneer Matching: |
| | | | | | | | Finish Application: |
| | | | Panel Size: |
| | | | | Thickness: Nominal 4-inch (100 mm). |
| | | | | Width: |
| | | | | Closure Panels: |
| | | | | Height: |
| | | | Panel Seals and Closures: |
| | | | | Vertical Seals: Extruded aluminum with interlocking convex/concave astragals with resilient quad-lip gaskets. Rigid plastic astragals or astragals with gaskets on only one panel edge are not acceptable. |
| | | | | | Horizontal Top and Bottom Seals: Modernfold ComforTronic. Seals shall operate electrically without tools or cranks. They shall extend when partition is in expanded position and exert adequate force to acoustically seal top and bottom of panels. Seals shall retract when partition is being closed to provide 7/8-inch (22.2 mm) operating clearance. |
| | | | | | Acoustical Gaskets: Polyurethane. |
| | | | | Locations: Provide on all panels and pass doors. |
| | | | | Jambs: Expanding Jambs |
| | | | | Motors: Low voltage, overall system UL listed. System wiring shall be plenum rated. |
| | | | | | Intersecting Partition Interface |
| | | | Suspension System and Soffits: |
| | | | | | Modernfold G-150 Suspension System |
| | | | | | Track: Extruded aluminum. Finish: Pre-painted off-white. Supported by adjustable steel hanger brackets, supporting the load-bearing surface of the track, connected to structural support by pairs of 3/8 inch(9.5 mm) diameter threaded rods. |
| | | | | | Exposed Track Soffit: Metal, removable for service and maintenance, attached without exposed fasteners and pre-painted off-white. |
| | | | | | Carriers: Two stainless-steel trolleys for each panel with vinyl tired ball-bearing wheels, with suspension system with automatic indexing of panels into stack area using pre-programmed switches and trolleys without electrical, pneumatic, or mechanical activation. |
| | | | | | Modernfold No. 14 "Smart Track" Suspension System |
| | | | | | Track: Minimum 0.18-inch (4.57 mm) thick formed steel track with adjustable steel hanger brackets supporting the load bearing surface of the track, connected to structural support by pairs of 1/2 inch (13 mm) diameter threaded rods. |
| | | | | | Soffit: MDF, removable for service and maintenance, attached to track bracket with exposed fasteners, and pre-painted off-white. |
| | | | | | Carriers: Metal trolleys with four steel tires. |
| | | | | | Suspension system shall provide automatic indexing of panels into stack area using pre -programmed switches and trolleys without electrical, pneumatic, or mechanical activation. |
| | | | Special Components |
| | | | | | Single Pass Door |
| | | | | | Lockable Doors: Provide lever handles both sides and deadbolt operated from |
| | | | | | Double Pass Door |
| | | | | | Exit Sign: |
| | | | | | Acousti-Seal 900 Series Pocket Door |