1. Configure Meggitt Defense Systems - Caswell - LAW ENFORCEMENT AND COMMERCIAL RANGE EQUIPMENT
BULLET TRAPS
Pistol Rated/Rubber
Model LE6500P Vertical GranTrap
Rifle Rated/Rubber Systems The overall height and depth of the bullet trap shall be as indicated on the Drawings.
Model LE7500 Reclining GranTrap
Model LE7500OTR Reclining GranTrap with Overtrap Rubber Covered
Model LE3500 Rubber Composite Elastic Belting Type
Model LE6500R Vertical GranTrap
Pistol Rated/Steel
Model LE2200 Escalator Bullet Trap
Model LE2400 Venetian Blind Bullet Trap
Rifle Rated/Steel
Model LE4000 Escalator Bullet Trap
Model LE9C Leadalator Escalator Bullet Trap
CLEARING TRAPS
Pistol
Model LE1213 Handgun Clearing Trap
Rifle
Model LE1216 Rifle Clearing Trap
SHOOTING STALLS
Pistol Rated Shooting Stalls
Model BP10B Bastion Pylon Type Shooting Stall with Barricade
Model BP10E Bastion Pylon Type Shooting Stall with Blast Shield
The light terminal for the signal light system shall be built into the left stall surface as high and far forward as internal
construction permits.
Model BP10U Bastion Pylon Type Shooting Stall with Blast Shield
Model BV10B Phoenix Clear View Shooting Stall with Barricade
Model BV10EB Phoenix Clear View Shooting Stall with Blast Shield and Gate Barrier
Rifle Rated Shooting Stalls
Model BP16B Bastion Pylon Type Shooting Stall with Barricade
Provide with removable spent brass receptacle, steel approximately 8 in (203 mm) wide by 6 in (152 mm) high, and 3 in
(76 mm) deep.
Build light terminal for the signal light system shall be built into the left stall surface as high and far forward as internal
construction permits.
Model BP16ES Bastion Pylon Type Shooting Stall with Extended Blast Shield and Gate Barricade
Provide with removable spent brass receptacle, steel approximately 8 in (203 mm) wide by 6 in (152 mm) high, and 3 in
(76 mm) deep.
The light terminal for the signal light system into the left stall surface as high and far forward as internal construction permits.
Model BV10REB Phoenix Clear View Shooting Stall with Blast Shield and Gate Barrier
SAFETY CEILINGS
Pistol Rated Safety Ceilings
Model JG12
Model JG12B
Rifle Rated Safety Ceilings
Model JG12C
Model JG12D
BAFFLES
Pistol Rated Baffles
Model JA4
Model JA4B
Model JA2
Model JA2B
Acoustical Surfacing After erection and alignment, the panels shall be surfaced with acouostical material consisting of 2 in
(51 mm) sculptured foam, Model No. AAF-8.
Model JA8
Model JA8B
Rifle Rated Baffles
Model JA4C
Model JA4D
Model JA2C
Model JA8C
Model JA8D
REDIRECTIVE GUARDS
Pistol Rated Redirective Guards
Model JR5B
Rifle Rated Redirective Coves
Model JR5C
Model JR5D
SPECIALTY GUARDS
Pistol Rated Specialty Guards
Model JR7
Model JR3
Rifle Rated Specialty Guards
Model JR7C
Model JR3C
BALLISTIC FLOOR AND WALL TREATMENTS
Pistol Rated Ballistic Floor and Wall Treatments
Model BWA
Model BWB Ballistic Combat Wall System
Rifle Rated Ballistic Floor and Wall Treatments
Model SRP
Size
Color
Model BWC Ballistic Wall System
Model BWD Ballistic Wall System
Note The following is a finished second side panel for use with Models BWC and BWD above.
Model MCW-2 Finished Second Side for BWC or BWD
Absorption Acoustical Foam
Model No. AAF-Class1
Color
TARGET SYSTEMS
Model RTS 360 degree Target Oscillation
Model RTSL 360 degree Target Oscillation
Model ATO-3000 Monorail Target System
Model CEE, Cas-Rail Econoline Monorail Target Retrival System
Provide wide target holders for full-size police silhouette targets.
Model CEB, Electric Target Retrival System (Trolley wire type, electrically powered.)
Note The following are optional features.
Provide intermediate stops with the same stopping features of the terminal stops.
Provide drive units with an entrance box with knockouts for connection to the 115 vac electrical power.
Provide system with puller cord consisting of 1/8 inch (3 mm), nylon cord.
Provide prone adapters to suspend the targets so their top edges are approximately 24 inches (610 mm) above the floor.
Provide wide target adapters with clips 18 inches (457 m) apart to carry all law enforcement targets up to the full-size B21 and B27
silhouette targets without backers.
Model CTC-A, Target Carrier System
Note The following are optional features.
Provide intermediate stops with the same stopping features of the terminal stops.
A prone target holder shall be provided for each system to suspend targets so their top edge will be approximately 18 inches (457 mm)
above the floor for prone shooting and rifle targets.
Provide wide target holders for full-size police silhouette targets consisting of two target-holding clips located 18 inches (457 mm)
apart and connected to a common descender.
Model CTC-D, Target Carrier System
Note The following are optional features.
Provide intermediate stops with the same stopping features of the terminal stops.
A prone target holder shall be provided for each system to suspend targets so their top edge will be approximately 18 inches (457 mm)
above the floor for prone shooting and rifle targets.
Provide wide target holders for full-size police silhouette targets consisting of two target-holding clips located 18 inches (457 mm)
apart and connected to a common descender.
Model DP65V, Portable Ground Mounted Pursuit Target System with Variable Speed Control
AUDIO/VISUAL COMMUNCIATION SYSTEMS
Model BL2 Slight Light Illuminator
Model MC65 Beta Sight Lights Slight Light Illuminator
Model EM15 Signal Light System
Model EM30, Firing Line Security System
Model EG58 Audio Communications System (Two-Way Speaker Type - Ten Channel Master System)
Model EG60 Audio Communications System (Two-Way Speaker Type - Twenty Channel Master System)
Model EG66, Speakers Stations for use Master Communications System
Model EG55, Stereo Ear Protector System
CONTROL SYSTEMS
Model RM9000 Master Control
Model RM9000-LT Master Control
Model ATC Controls Master Control
Model EC16, Portable/Fixed Multi-Cycle Timer Console Control
Model EF 5, Individual Control Unit
Model E4P, Local Control Unit
MOBILE RANGES
Road Range 3 Fully equipped firearms training facility in a trailer.
Note The following are optional features.
Rifle ballistics on walls, ceiling and floor, protection up to (3500 FPS/3000 Ft-Lb).
Storage box under trailer, 36 in by 30 in by 100 in (914 mm by 762 mm by 2540 mm) storage box with lockable doors on both sides.
Travel-Vac system Built-in HEPA range cleanup vacuum system.
Fuel Generator 20 KW Power source sized to meet the needs of the systems selected and mounted on the front of the trailer.
Additional 50 gallon fuel tank.
Gun safe built into rangemaster's room.
Two infrared heaters over the firing line as an added comfort.
Split-level front jacks for range leveling.
Spare tire and rack for trailer with a mounting rack under the trailer unit.
MILITARY COMBINED ARMS TRAINING EQUIPMENT
INFANTRY TARGET SYSTEMS
SIT (Stationary Infantry Target)
Model AA8, Pop-Up Target Mechanism, Radio Control, Portable
Note The following are optional features.
Accessories. Provide the following accessories.
5-unit battery charging system.
12-unit battery charging system.
30-unit battery charging system.
60-unit battery charging system.
Solar charging kit.
Muzzle flash simulator.
Double target arm.
Sound effects simulator.
Model AA9, Pop-Up Target Mechanism, Radio Control, AC Power
Note The following are optional features.
Accessories. Provide the following accessories.
Muzzle flash simulator.
Double target arm.
Sound effects simulator.
Model AA10, Pop-Up Target Mechanism, Cable Control, AC Power
Note The following are optional features.
Accessories. Provide the following accessories.
Muzzle flash simulator.
Double target arm.
Sound effects simulator.
MIT (Moving Infantry Target)
Model DP26, Moving Infantry Target, Cable-Driven
Note The following are optional features.
Accessories. Provide the following accessories.
Solar charging kit.
Muzzle flash simulator.
Interface to GFM MILES detector/LTDS.
Double target arm.
Sound effects simulator.
Model DP28, Moving Infantry Target, Self Powered
Note The following are optional features.
Accessories. Provide the following accessories.
Solar charging kit.
AC charging kit.
ARMOR TARGET SYSTEMS
SAT (Stationary Armor Target)
Model AA25, Tank Target Mechanism, Stationary, Frontal
Control
Control through a supplier furnished Computer Control System.
Control using hand-held programmable Range Controller.
Radio control from an existing RETS Range Control Station.
Control as indicated on the Drawings.
Note The following are optional features.
Accessories. Provide the following accessories.
Internal Battery Charger.
Battery Eliminator.
Interface to GFM MILES detector/LTDS.
Solar Charging Kit.
Stacking/Carrying Handles.
Telescoping Stabilizers.
Model AA28, Tank Target Mechanism, Stationary, Flank
Control
Control through a supplier furnished Computer Control System.
Control using hand-held programmable Range Controller.
Radio control from an existing RETS Range Control Station.
Control as indicated on the Drawings.
Note The following are optional features.
Accessories. Provide the following accessories.
Internal Battery Charger.
Interface to GFM MILES detector/LTDS.
Solar Charging Kit.
Telescoping Stabilizers.
Armored Moving Target System (AMTS) self-propelled
Note The following are optional features.
Accessories. Provide with the following accessories.
Moonlight simulator that can be remotely controlled by the operator.
On-board generator and battery charger to assure continuous range operation.
Computer control system, a hand held controller and an optional interface device to allow control by an existing
ERETS computer system.
Electrification kit to allow the on-board battery charger to be powered from the existing RETS AMTC bus bars.