12494 - WINDOW SHADES ARCAT SpecWizard

STEP 1: Configure WINDOW SHADES:

MANUALLY OPERATED WINDOW SHADES

FlexShade: Manually operated, vertical roll-up, fabric window shade with components necessary for complete installation.

Bead chain and clutch operating mechanism:

Bead Chain Loop:

Crank and gear box:

Single Shade

Multiple shades:

Coupling system: Provide system to operate shades from single crank by coupling shade rollers together.

Number of Shades:

Crank Handle:

Size:

Mounting:

**NOTE**The Following Two Mounting Options Apply For Bead Chain And Clutch Operating Mechanism! Endcaps are required for
Crank Operated FlexShades and are automatically included when selecting the Crank and Gear Box option above.

Endcaps: Stamped steel with universal design suitable for mounting to ceiling, wall, and jamb.

Mounting brackets

Bracket Mounted to

Fascia with Endcaps

Finish:

Headbox Ceiling/Wall style with Endcaps

Finish:

Headbox, Pocket style with Endcaps

Finish:

Ceiling pocket

**NOTE** Type D FlexShade Pocket is for Bead Chain And Clutch Operating Mechanism ONLY!

Type D FlexShade Pocket: Rectangular pocket designed for recessed ceiling installation of window shades.

Closure panel: Removable closure panel clips to bottom of pocket to form 1 inch (25 mm) opening for passage of
shade fabric.

Corners: Welded one-piece aluminum sections connecting to and matching pockets to allow continuous shade recess
at ceiling corners.

Pocket ends: Welded one-piece aluminum sections connecting to and matching pockets.

Wall Clip with Closure panel: For site constructed ceiling recesses, provide removable closure panel to minimize slot for
shade passage but allowing access to shade for maintenance.

Closure Width:

Spring Roller Shade: Manually operated, vertical roll-up, fabric window shade.

Mounting:

Mounting brackets

Bracket Mounted to:

Fascia with Endcaps

Finish:

Headbox with Endcaps

Finish:

MOTORIZED WINDOW SHADES

Motorized FlexShade: Motorized vertical roll-up, fabric, window shade with motors and controls.

Shade Motor and Control System:

Standard Motor: 110 VAC, single phase, 60 HZ, instantly reversible, lifetime lubricated, & equipped w/internal thermal overload protector,
electric brake, & pre-set accessible limit switches.

Individual Control:

Group Control:

Individual and Group Control:

NOTE: Select one of the following low voltage input option paragraphs whenever an SC-1 Group or Individual Control is specified above.

Low Voltage Inputs:

Intelliflex Wall Switches

IR Remote Control

RF Remote Control

Sun Sensor

Timer

RS 232

LS-100 IP control

Quiet Standard Motor: 110 VAC motor operates at 44 Db measured 3 feet from the motor. Makes no audible clicks when motor stops
or starts. Tubular motor concealed inside each shade roller tube.

Individual Control:

Group Control:

Individual and Group Control:

NOTE: Select one of the following low voltage input option paragraphs whenever an SC-1 Group or Individual Control is specified above.

Low Voltage Inputs:

Intelliflex Wall Switches

IR Remote Control

RF Remote Control

Sun Sensor

Timer

RS 232

LS-100 IP control

Battery Motor with 12V Battery Pack: Battery powered motor w/built-in radio receiver. Includes 12V battery pack. No external wiring

required. Tubular motor concealed inside each shade roller tube.

Individual Control, Group Control and Individual and Group Control:

1-Channel Transmitter.

4-Channel Transmitter.

1-Channel Wall Switch.

4-Channel Wall Switch.

Sun Sensor.

Programmable Timer.

Dry Contact Interface.

5 channel multilink interface for IR, RS 232, and dry contact.

16 channel RS 232 to RF interface.

Radio Technology Motor: 110 VAC motor with built-in radio receiver. Operates at 44 Db measured 3 feet from the motor. Makes no

audible clicks when motor stops or starts. Tubular motor concealed inside each shade roller tube.

Individual Control, Group Control and Individual and Group Control:

Single channel wireless handheld transmitter.

Four channel wireless handheld transmitter.

Single channel wireless wall switch for radio motor control.

Four channel wireless wall switch for radio motor control.

RS-232/Dry Contact - Allows for full control of radio motor shade via RS-232/dry contact interface.

Wireless Sun Sensor - Allows operation of one group of radio motors per sensor.

Wireless Timer - Allows operation of one group of radio motors per timer.

Multi-Link Universal RTS Interface (5-channel).

Multi-Link RS232 to RTS Interface (16-channel).

Quiet Radio Technology Motor: 110 VAC motor with built-in radio receiver. Operates at 44 Db measured 3 feet from the motor.

Makes no audible clicks when motor stops or starts. Tubular motor concealed inside each shade roller tube.

Individual Control, Group Control and Individual and Group Control:

Single channel wireless handheld transmitter.

Four channel wireless handheld transmitter.

Single channel wireless wall switch for radio motor control.

Four channel wireless wall switch for radio motor control.

RS-232/Dry Contact - Allows for full control of radio motor shade via RS-232/dry contact interface.

Wireless Sun Sensor - Allows operation of one group of radio motors per sensor.

Wireless Timer - Allows operation of one group of radio motors per timer.

Multi-Link Universal RTS Interface (5-channel).

Multi-Link RS232 to RTS Interface (16-channel).

24V DC Quiet Motor: 24V DC quiet motor with built-in radio receiver. Operates at 44 Db measured 3 feet from the motor. Makes no

audible clicks when motor stops or starts. Tubular motor concealed inside each shade roller tube.

Individual Control, Group Control and Individual and Group Control:

Single channel wireless handheld transmitter.

Four channel wireless handheld transmitter.

Single channel wireless wall switch for radio motor control.

Four channel wireless wall switch for radio motor control.

RS-232/Dry Contact - Allows for full control of radio motor shade via RS-232/dry contact interface.

Wireless Sun Sensor - Allows operation of one group of radio motors per sensor.

Wireless Timer - Allows operation of one group of radio motors per timer.

Multi-Link Universal RTS Interface (5-channel).

Multi-Link RS232 to RTS Interface (16-channel).

Transformer (24V DC ONLY):

Plug-In:

Din-Rail Mount:

Intelligent Technology Motor: 110 VAC motor with built-in low voltage controller with 3-wire pig tail and data cable. No external motor

controls are required. Available with optional three prong plug. Tubular motor concealed inside each shade roller tube.

Individual Control, Group Control and Individual and Group Control:

Single Channel Handheld RF transmitter.

4-channel Handheld RF transmitter.

IP interface.

Single Channel IR transmitter.

Wireless Wall Switch - Wall switch for ILT motor control.

Quiet Intelligent Technology Motor: 110 VAC quiet motor with built-in low voltage controller with 3-wire pig tail and data cable. Motor operates

at 44 Db measured 3 feet from the motor. Makes no audible clicks when motor stops or starts. Available with optional three prong plug.

Individual Control, Group Control and Individual and Group Control:

Single Channel Handheld RF transmitter.

4-channel Handheld RF transmitter.

IP interface.

Single Channel IR transmitter.

Wireless Wall Switch - Wall switch for ILT motor control.

Mounting:

Mounting brackets

Bracket Mounted to

Fascia with Endcaps

Finish:

Headbox Ceiling/Wall Style with Endcaps

Finish:

Headbox, Pocket style with Endcaps

Finish:

Ceiling pocket

Type D FlexShade Pocket: Rectangular pocket designed for recessed ceiling installation of window shades.

Closure panel: Removable closure panel clips to bottom of pocket to form 1 inch (25 mm) opening for passage of
shade fabric.

Corners: Welded one-piece aluminum sections connecting to and matching pockets to allow continuous shade recess
at ceiling corners.

Pocket ends: Welded one-piece aluminum sections connecting to and matching pockets.

Wall Clip with Closure panel: For site constructed ceiling recesses, provide removable closure panel to minimize slot for
shade passage but allowing access to shade for maintenance.

Closure Width:

Crank operation override: Crank and gear box operate shades in event of power outage or motor failure.

Coupling system: Couplings to join motorized shade rollers to allow operation by single motor. FlexShade Coupling System.

Motorized Shade Rollers:

OPAQUE WINDOW SHADE SYSTEM