1. Configure Thermmax Scientific Products - SYSTEM DESCRIPTION:

Control and Performance:

Temperature Range:

Cold Room: 2 degrees C to 10 degrees C.

Freezer Room: Minus 10 degrees C to minus 30 degrees C.

Incubator Room: 20 degrees C to 50 degrees C.

Stability Room: 0 degrees C to 60 degrees.

Ultra-Low Freezer Room: 0 degrees C to minus 40 degrees C.

Special Environmental Rooms: ___ degrees C to ___ degrees C.

Humidity Range:SELECT RANGE--------Not controlled.Ambient to 95 percent relative humidity as limited by 50 degrees C dewpoint.20 percent to 95 percent relative humidity as limited by 3 degrees C to 40 degrees C dewpoints.Chemical desiccant drier system for applications requiring a dew point below 4 degrees C.

MANUFACTURED UNITS:

Doors: General: In-fitting, flush mounted, constructed similar to wall panels.

Door Swing:SELECT SWING--------Right-hand.Left-hand.As required for installation convenience.

Door Opening:SELECT OPENING--------36 inches by 78 inches (914 mm 1981 by mm).48 inches by 84 inches (1292 mm by 2134 mm).Special:_______________________________

Heated Gasket: Low voltage heater built into perimeter of jamb to prevent door from accumulating ice and freezing temperatures.

Window: Multi-layer, heated thermal pane window mounted in door with the following minimum viewing area.

Window Size:SELECT SIZE--------12 inches by 12 inches (305 mm by 305 mm).14 inches by 14 inches (356 mm by 356 mm).14 inches by 23 inches (356 mm by 584 mm).Special size of __inches by __ inches (__ mm by __ mm).

Floors: Provide insulated floors with similar construction as wall and ceiling panels.

Where scheduled, apply non-skid coating to cover floor surface.

Floor Thickness:SELECT THICKNESS--------2 inches (51 mm).4 inches (102 mm).

Floor Covering: Removable, open tread floor covering in each environmental room complying with the following:

Thickness: 1/8 inch (3 mm).

Material: PVC rubber matting.

Pattern: Open diamond design for easy cleaning.

Color: As selected.

Floor Covering: Seamless inlaid sheet vinyl in each environmental room complying with the following:

Manufacturer: Medintech by Armstrong or equal.

Coving: Seamless corner coving, extending into the sidewalls a minimum height of 4 inches (102 mm). Coving shall be vinyl capped.

Color: As selected.

ROOM SURFACE FINISH:

Standard Finishes: Where scheduled, provide panel sections with the following surface finishes.

Special Aluminum Finishes: Provide panel sections with the following surface finishes.

Special Stainless Steel Finishes: Provide interior and exterior wall surfaces fabricated from stainless steel with No. 2B finish.

LIGHTING:

Low Temperature Electronic Ballasts: Provide low temperature for cold rooms operating below 10 degrees C (50 degrees F).

Incandescent Lights: Vapor proof lights provide for freezers operating below 0 degrees C (32 degrees F).

Light Cycle Timer: A 24 hour on/off cycle timer shall be provided on control panel for cycling interior lighting.

INSTRUMENTS AND CONTROL SYSTEMS:

Alarms:

Inside Panic Alarm: Red "mushroom head"-type push-button located inside room near door.

Humidity Controller: When relative humidity control is specified, a completely solid state, electronic humidity controller will be supplied.

Profile Programmer: Control system that includes microprocessor based set point instead of time profile programmer.

Computer Interface: Digital computer communication interfaces designed to enable user to monitor and record process variables.

CONDITIONING PLENUMS:

Steam Humidifier: Steam-generating-type humidifier designed to add water vapor into conditioning plenum and not directly into room area.

Uses demineralized, distilled or reverse osmosis water supply furnished by Owner.

Chemical Drier (Sub-Freezing Dew Point Capability): Chemical dehumidifier system for ultra low humidity range.

FORCED AIR VENTILATION SYSTEM:

Provide forced air exchange ventilation system for applications consisting of an independent exhaust blower and adjustable intake filter port.

Amount of Air Exchange:SELECT AMOUNT--------15 CFM.25 CFM.50 CFM.Other _____________ of indoor ambient air-conditioned air.

REFRIGERATION SYSTEMS:

Air-Cooled Condensing Unit: Provide system with air cooled condenser, low speed fans, and low noise with metal guard protection.

Water-Cooled Condenser: Provide system with water-cooled condenser. Include water saving pressure regulation valve for constant compressor head pressure regulation.

Redundant Refrigeration System: 100 percent backup refrigeration system with complete redundancy including all refrigeration components.

SHELVING:

Freestanding Shelving: Chrome-plated wire rod shelving units manufactured free of burrs, sharp edges, and protrusions.

Freestanding Shelving: Stainless steel wire rod shelving units manufactured free of burrs, sharp edges, and protrusions.

Wall-Mounted Shelving: Chrome-plated or stainless steel, wire rod shelving units manufactured free of burrs, sharp edges, and protrusions.

Protective Finish: Manufacturer's recommended MetroSeal or Eagle antimicrobial protective finish.

ACCESS PORTS:

Provide access ports for water, drain line, air line, or gas lines in size specified:SELECT PORT SIZE--------1 inch (25 mm).2 inch (51 mm).3 inch (76 mm).4 inch (102 mm)._______.

SCHEDULE OF ROOMS:

Equipment Designation: ER-1.

Condensing Unit:SELECT UNIT--------Water.Air.

Condensing Unit Location:SELECT LOCATION--------Local indoors.Remote indoors.Remote outdoors.

2. When you are finished making selections:

Generate Spec: Word     WP   or   RTF