1. Configure Zero-Loc, Inc. - INSULATED PANEL SYSTEMS:
MATERIALS
Panel General Requirements
Panel Thickness:
Interior Wall And Ceiling Panel Finish:
Exterior Insulated Panel Finish:
Panel Protection (Fiberglass Reinforced Plastic)
Insulated Freezer Floor
Insulated Doors
Door Type:
Door Leaf Finishes
28 gauge (0.378 mm) galvanized metal skins
26 gauge (0.455 mm) stainless steel finish
26 gauge (0.455 mm) prepainted white G90 galvanized steel
Door Leaf Perimeter Trimming
18 gauge (1.214 mm) stainless steel channel
18 gauge (1.214 mm) galvanized steel channel
26 gauge (0.455 mm) prepainted white channel to match door leaf
Doorframe Component
Faceplate Components Fabrication
14 gauge (1.897 mm) (minimum) stainless steel
14 gauge ( 1.897 mm) (minimum) galvanized steel
26 gauge (0.455 mm) prepainted white galvanized steel clad overtop plywood
Door Jamb Caps
18 gauge (1.214 mm) stainless steel to match stainless steel faceplate
18 gauge (1.214 mm) galvanized steel to match galvanized steel faceplate
26 gauge (0.455 mm) prepainted white steel to match white faceplate
Hinged Door Hardware
Sliding Door Hardware
Hanger Assembly Material
10 gauge (3.416 mm) stainless steel
G90 galvanized steel
Freezer Doors
FABRICATION
Corners
Corner panel connections shall be butt or mitered, flashed, and finished by installation crew on-site
Corner panel connections shall be a single unit corner panel with a continuous metal skin on the outer bend
  2. When you are finished making selections:
  Generate Spec: Word     WP   or   RTF