1. Bullet Guard Corp. - COMPONENTS:

Level I Bullet Resistant Fiberglass Panels: Bullet Guard Architectural Armor (BGAA-01).

Thickness: 14 Inch (6 mm) maximum.

Weight: 2.8 pounds per square foot maximum.

Security Level: UL Listed and Tested for UL 752 Level I.

Fire Rating: One-hour fire rating per ASTM E 119.

Level II Bullet Resistant Fiberglass Panels: Bullet Guard Architectural Armor (BGAA-02).

Thickness: 5/16 Inch (7.9 mm) maximum.

Weight: 4.3 pounds per square foot maximum.

Fire Rating: One-hour fire rating per ASTM E 119.

Security Level: UL Listed and Tested for UL 752 Level II.

Level III Bullet Resistant Fiberglass Panels: Bullet Guard Architectural Armor (BGAA-03).

Thickness: 1/2 Inch (12.5 mm) maximum.

Weight: 4.5 pounds per square foot maximum.

Fire Rating: One-hour fire rating per ASTM E 119.

Security Level: UL Listed and Tested for UL 752 Level III.

Level IV Bullet Resistant Fiberglass Panels: Bullet Guard Architectural Armor (BGAA-04).

Thickness: 1-3/8 Inch (35 mm) maximum.

Weight: 14 pounds per square foot maximum.

Fire Rating: One-hour fire rating per ASTM E 119.

Security Level: UL Listed and Tested for UL 752 Level IV.

Level V Bullet Resistant Fiberglass Panels: Bullet Guard Architectural Armor (BGAA-05).

Thickness: 1-7/8 Inch (48 mm) maximum.

Weight: 15 pounds per square foot maximum.

Fire Rating: One-hour fire rating per ASTM E 119.

Security Level: UL Listed and Tested for UL 752 Level V.

Level VI Bullet Resistant Fiberglass Panels: Bullet Guard Architectural Armor (BGAA-06).

Thickness: 3/8 Inch (10 mm) maximum.

Weight: 3.9 pounds per square foot maximum.

Fire Rating: One-hour fire rating per ASTM E 119.

Security Level: UL Listed and Tested for UL 752 Level VI.

Level VII Bullet Resistant Fiberglass Panels: Bullet Guard Architectural Armor (BGAA-07).

Thickness: 1-1/8 Inch (29 mm) maximum.

Weight: 12 pounds per square foot maximum.

Fire Rating: One-hour fire rating per ASTM E 119.

Security Level: UL Listed and Tested for UL 752 Level VII.

Level VIII Bullet Resistant Fiberglass Panels: Bullet Guard Architectural Armor (BGAA-08).

Thickness: 1-7/16 Inch (37 mm) maximum.

Weight: 15 pounds per square foot maximum.

Fire Rating: One-hour fire rating per ASTM E 119.

Security Level: UL Listed and Tested for UL 752 Level VIII.

Bullet Resistant 3 Sided Transaction Window: Aluminum framed, factory glazed with deal tray and voice port.

Extruded 6063 Aluminum with a minimum wall thickness of .125 inch (3 mm).

Note that for security levels of IV and above Glassclad Polycabonate is required.

Glazing:SELECT GLAZING--------Polycarbonate.Glassclad Polycarbonate.

Opening Security Level:SELECT LEVEL--------UL 752 Level I.UL 752 Level II.UL 752 Level III.UL 752 Level IV.UL 752 Level V.UL 752 Level VIII.

Counter top:SELECT COUNTER--------Wood finished with plastic laminate as selected by the Architect.Stainless steel with a satin finish.

Voice port material:SELECT MATERIAL--------Fabricated with glazing material matching glazing and overlap the gap in glazing a minimum of 2 inches.Stainless steel voice ports of equal ballistic protection can be substituted.

Voice ports:SELECT PORT--------Horizontal.Vertical.Circular.Arched.Closeable cover for exterior use.

Ballistic Capture Window Frame System and Blast Retention Window and Frame:

Aluminum frame, factory glazed with deep capture of 1 inch on four sides and fasteners on the protected side of the frame.

Note that for security levels of IV and above Glassclad Polycabonate is required.

Glazing:SELECT GLAZING--------Polycarbonate.Glassclad Polycarbonate.

Opening Security Level:SELECT LEVEL--------UL 752 Level I.UL 752 Level II.UL 752 Level III.UL 752 Level IV.UL 752 Level V.UL 752 Level VIII.

Bullet Resistant Interlocking Package Exchange Window and Frame:

Aluminum frame with double interlocking doors.

Opening Security Level:SELECT LEVEL--------UL 752 Level I.UL 752 Level II.UL 752 Level III.

Bullet Resistant, Full Light, Aluminum Door and Frame Assembly:

Aluminum Door with welded corners. Mechanically fastened corners are not permitted.

Note that laminated Glass can be used for levels 1 thru 3 but for security levels of IV and above Glassclad Polycabonate is required.

Glazing:SELECT GLAZING--------Polycarbonate.Glassclad Polycarbonate.Laminated Glass.

Opening Security Level:SELECT LEVEL--------UL 752 Level I.UL 752 Level II.UL 752 Level III.UL 752 Level IV.UL 752 Level V.UL 752 Level VIII.

Bullet Resistant, Solid Core Wood Door and Aluminum Frame Assembly:

Bullet resistant solid core wood door of the "non-ricochet type" with a phenolic backer.

Facing:SELECT FACING--------Wood veneer as selected by the Architect.Plastic laminates as selected by the Architect.

Opening Security Level: SELECT LEVEL--------UL 752 Level I.UL 752 Level II.UL 752 Level III.UL 752 Level IV.UL 752 Level V.UL 752 Level VIII.

Bullet Resistant Steel Doors and Frames: Provide with factory primed finish.

Steel Doors:

Thickness:SELECT THICKNESS--------1-3/4 inches (44 mm) minimum.2 inches (50 mm) minimum.

Vertical Edges: SELECT EDGE--------Single acting swing doors: Bevel 1/8 inch in 2 inches (3.17 mm in 50 mm).Double acting swing doors: Radius 2-1/8 inches (54 mm).

Door Frames: Welded units with integral trim, of sizes and profiles indicated and as follows:

Frames for interior use: Steel sheet, minimum 14 gage thickness.

Frames for exterior use: Galvanized steel sheet, minimum 14 gage thickness.

Hardware preparation: Mortise, reinforce, drill, and tap frames at factory for fully templated mortised hardware.

Teller Window Frames: Welded units with integral trim, of sizes and profiles indicated and as follows:

Frames for interior use: Steel sheet, minimum 14 gage thickness.

Provide with integral stainless steel pass tray.

Provide appurtenance blocking to allow voice transference around glass perimeter.

2. When you are finished making selections:

Generate Spec: Word     WP   or   RTF