1. Configure Knauf Fiber Glass GmbH MECHANICAL INSULATION:

A. Pipe Insulation

Primary Application: Use the specified molded pipe insulation on all piping unless otherwise indicated.

R-Value SELECT R-VALUE------------As indicated on the drawing.R-Value: _____________.

Finish insulation located indoors with ASJ jacket, unless otherwise indicated

Finish insulation exposed outdoors, in mechanical rooms, & high traffic areas with following jacketing:

Jacket: PVC jacketing and fitting covers

Where PVC jacketing can't be used, use specified metal jacketing & fitting covers

NOTE:Don't use PVC jacketing where exposed to direct sunlight & insulation is more than 20 in outside diameter

or where insulation thickness is not adequate to ensure that the surface temp. of PVC doesn't exceed 125 degree F

Molded Self-Wicking Pipe Insulation: Knauf PermaWick Insulation

Semi-Rigid Board Insulation: Knauf Pipe & Tank Insulation

Fitting Insulation: Where molded PVC fitting covers are not used.;

Fitting Insulation material made of: SELECT MATERIAL--------------------Molded or mitered fiber glass boardMolded or mitered perlite board.Calcium Silicate

B. Equipment Insulation

Primary Application: Use the specified rigid insulation on all equipment indicated to be insulated, unless otherwise indicated.

R-Value: SELECT R-VALUE-------------------As indicated on the drawings.R-Value: _____________.

Where equipment shape doesn't accomodate rigid boards, use elevated temperature insulation, either semi-rigid or flexible

Finish insulation exposed in mechanical rooms or subject to mechanical abuse with one of the following, unless otherwise indicated:

Finish: SELECT FINISH----------------PVC JacketingMetal as indicated on the drawings.

Finish insulation exposed outdoors with one of the following, unless otherwise indicated:

Finish: SELECT FINISH----------------PVC JacketingMetal as indicated on the drawings

Finish other insulation with one of the following, unless otherwise indicated:

Finish: SELECT FINISH----------------ASJ FacingFSK Facing

High Temperature Application: Use one of the following materials, for surface temperatures between 450 - 850 degrees F:

Elevated temperature rigid insulation

Elevated temperature semi-rigid insulation

High-density elevated temperature flexible insulation

Elevated temperature flexible insulation

R-Value: SELECT R-VALUE------------------------As indicated on the drawings.R-Value:___________.

Finish: SELECT FINISH-------------------------PVC JacketingMetal Jacketing

High Temperature Application: Use one of the following materials, for surface temperatures between 850 - 1000 degrees F:

Elevated temperature semi-rigid board insulation

Elevated temperature flexible blanket insulation

R-Value: SELECT R-VALUE------------------------As indicated on the drawingsR-Value:___________.

Finish: SELECT FINISH-------------------------PVC JacketingMetal Jacketing

C. Duct Insulation

Primary Application: Flexible Insulation:

R-Value: SELECT R-VALUE--------------------Comply with ASHRAE 90.1, installedAs indicated on the drawings.R-Value: ___________.

Finish Insulation located indoors, facing:

None

FSK

PSK or ASJ

Vinyl vapor retarder or ASJ

Finish Insulation exposed outdoors, facing: SELECT FACING--------------Aluminum JacketingPVC Jacketing

Primary Application: Rigid Insulation:

R-Value: SELECT R-VALUE-----------------Comply with ASHRAE 90.1, installedAs indicated on the drawings.R-Value: ___________.

Medium Density: Facing; SELECT FACING--------------------Vapor retarder all service jacket (ASJ)Vapor retarder foil scrim kraft (FSK)

High Density: Facing; SELECT FACING--------------Vapor retarder all service jacket (ASJ)Vapor retarder foil scrim kraft (FSK)

Finish Insulation located indoors, facing:

None

FSK

PSK or ASJ

Vinyl vapor retarder or ASJ

Finish Insulation exposed outdoors, facing: SELECT FACING--------------Aluminum JacketingPVC Jacketing

High Temperature Application:

Use same insulation as specified for high temperature equipment on ducts operating over 350 degree F

Duct Liner Application: Use duct liner on interior of ducts, unless otherwise indicated

Duct Liner: Knauf Duct Liner E-M

D. Accessory Materials

Joint Tape: Proto Corporation Indoor/Outdoor, UV resistant

2. When you are finished making selections:

Generate Spec: Word     WP   or   RTF