1. Configure Thomas and Betts Corp - Raceways and Boxes:

FLUSH SERVICE FLOOR BOXES

General: Flush service floor boxes for multiple services shall deliver power and communications cable, from the same device

When hinged cover is closed and no services in place, device shall have no obstructions above surface of floor

Cover assembly shall protect against the ingress of water and foreign material with a gasket and shall meet UL scrubwater exclusion requirements

Device plates, faceplates and trims as scheduled or as required as manufactured by Thomas and Betts Corp. Refer to Materials Finish Schedule

Round Flush Service Floor Box Series shall deliver power or communications cable

68 Series Round Floor Boxes stamped steel with a zinc plating minimum 0.0005 inch (0.0127 mm) thick

600 Series Round Floor Boxes with cast iron fully adjustable watertight body

68P Series Round Floor Box fabricated of PVC plastic

Rectangular Flush Service Floor Box shall deliver power or communications cable

640 Series Rectangular Floor Boxes with cast iron fully adjustable watertight body (deep)

840 Series Rectangular Floor Boxes with cast iron semi-adjustable watertight body (shallow)

740 Series Series Rectangular Floor Boxes stamped steel with a zinc plating minimum 0.0005 inch (0.0127 mm) thick (shallow & deep)

640P Series Rectangular Floor Box fabricated of Noryl plastic

Cover Type: SELECT TYPE-------Refer to Drawing General Notes for cover type application requiredPlug cover for N.P.S size as scheduled or requiredDuplex Lift LidHinged Lift LidsGFCI Lift Lid

RECESSED SERVICE FLOOR BOXES

General: Recessed service boxes for multiple services shall deliver power and communications cable, from the same device

When hinged cover is closed and no services in place, device shall have no obstructions above surface of floor

Cover assembly shall protect against the ingress of water and foreign material with a gasket and shall meet UL scrubwater exclusion requirements

Device plates, faceplates and trims as scheduled or as required as manufactured by Thomas and Betts Corp. Refer to the Materials Finish Schedule

2 Compartment Recessed Service Floor Boxes with Round Covers:

Cover and Carpet Plate: SELECT MATERIAL-------Refer to Material Finish ScheduleShall be constructed of brassShall be constructed of aluminumPolycarbonate Cover Color: CharcoalPolycarbonate Cover Color: BrownPolycarbonate Cover Color: Gold

2 Compartment Recessed Service Floor Boxes with Rectangular Covers

664-SC Recessed Service Floor Box, stamped steel, standard depth

664-S Recessed Service Floor Box, stamped steel, shallow

664-CI Recessed Service Floor Box, cast iron

Covers: SELECT COLOR-------Refer to Materials Finish ScheduleBLK (black)GRY (gray)BRN (brown)BGE (beige)

4 Compartment Recessed Service Floor Boxes - Galvanized Steel

4 Compartment Recessed Service Floor Boxes - Cast Iron

4 Compartment Recessed Service Floor Boxes - Ultra-Shallow

4 Compartment Recessed Service Floor Boxes: Each compartment shall accept up to 2 power devices as required

Covers: SELECT COLOR-------Refer to Materials Finish ScheduleBLK (black)GRY (gray)BRN (brown)BGE (beige)

Round Recessed Service Covers for Floor Box Applications

Concrete Applications: The 68R covers shall be used with a Steel City 68P round PVC floor box

Wood Sub-Floor Applications: The 68R covers shall be used with an appropriate Steel City 3 inches by 2 inches (76 mm by 51 mm) metal switch box with mounting ears

Raised Floor Applications: The 68R covers shall be used with an appropriate Steel City 3 inches by 2 inches (76 mm by 51 mm) metal switch box with mounting ears

Covers: SELECT COLOR-------Refer to Material Finish ScheduleCovers shall be grayCovers shall be black. Black covers shall have optional brass or aluminum carpet flangesCovers shall be brownCovers shall be beige

ABOVE-FLOOR SERVICE FITTINGS

Shall be sized as indicated on drawings or as required by code for size and quantity of conductors

Shall be brushed aluminum service fitting heads

Shall deliver electrical power from receptacles as designated on the plans

Shall deliver telephone/data through precut bushed opening

Shall be furnished standard with required receptacles

Shall be furnished standard with conduit nipple for direct screw threading into cover assembly

Shall be UL listed

FIRE-RATED POKE THROUGH SYSTEMS

Fire Rating Application:

Provide City of Chicago approved base units where scheduled or required for poke through style specified

1-Hour Rated Floor: SELECT TYPE-------2-1/4 inches (57 mm) minimum concrete over steel decking required3 inches (76 mm) minimum concrete for reinforced slab required7-1/2 inches (191 mm) maximum concrete thickness required

2-Hour Rated Floor: SELECT TYPE-------3-1/4 inches (86 mm) minimum concrete over steel decking4 inches (102 mm) minimum concrete for reinforced slab7-1/2 inches (191 mm) maximum concrete thickness

Provide a flush power and communications poke through for use in a 4 inch (102 mm) hole

Cover: SELECT MATERIAL-------Solid Brass with brushed finishAluminum brushed finishAluminum, powder-coated black finishAluminum, powder-coated brown finishAluminum, powder-coated biege finishAluminum, gray finish

FPT4-4P-4C Flush Poke Through Series as manufactured by Thomas and Betts Corp

FPT4-2P-6C Flush Poke Through Series as manufactured by Thomas and Betts Corp

FPT4-8C Flush Poke Through Series as manufactured by Thomas and Betts Corp

FPT4-1TL-2C Flush Poke Through Series as manufactured by Thomas and Betts Corp

Communication Device Plates

Junction Box

Provide a flush power and/or communications poke through for use in a 3 inch (76 mm) hole

FPT3 Series Flush Poke Through as manufactured by Thomas and Betts Corp

Cover: SELECT TYPE-------Solid brass with brushed finishAluminum, brushed finishAluminum, powder-coated black finishAluminum, powder-coated brown finishAluminum, powder-coated biege finishAluminum, gray finish

FPT Series Furniture Feed Poke Through as manufactured by Thomas and Betts Corp

Metallic Cover: Solid brass or aluminum with brushed finish

Cover: SELECT TYPE-------Nonmetallic, black colorNonmetallic, brown colorNonmetallic, biege colorNonmetallic, gray color

Provide furniture feed poke through service fitting for use in a 4 inch (102 mm) hole

FFPT4 Series Furniture Feed Poke Through as manufactured by Thomas and Betts Corp

Cover: SELECT TYPE-------Shall include a concentric 2 inch (51 mm) and 1-1/4 inch (32 mm) threaded hub for conduit connectionsSolid brass with brushed finishAluminum brushed finishAluminum, powder-coated black finishAluminum, powder-coated brown finishAluminum, powder-coated biege finishAluminum, gray finish

Provide furniture feed poke through service fitting for use in a 3 inch (76 mm) hole

FFPT3 Series Furniture Feed Poke Through as manufactured by Thomas and Betts Corp

Cover: SELECT TYPE-------Shall include a concentric 2 inch (51 mm) and 1-1/4 inch (32 mm) threaded hub for conduit connectionSolid brass with brushed finishAluminum brushed finishAluminum, powder-coated black finishAluminum, powder-coated brown finishAluminum, powder-coated biege finishAluminum, gray finish

FPT Series Furniture Feed Poke Through as manufactured by Thomas and Betts Corp

Cover: SELECT TYPE-------Cover: Shall include two 1/2 inch (12 mm) threaded hubs and one 3/4 inch (19 mm) threaded hubs for conduit connectionCover: Nonmetallic black colorCover: Nonmetallic, brown colorCover: Nonmetallic, beige colorCover: Nonmetallic, gray color

Provide an above floor pedestal power and communications poke through service fitting for use in a 3 inches (76 mm) hole

FPT3 Series as manufactured by Thomas and Betts Corp

ACCESS FLOOR MODULES

Accepts up to 2 power receptacles

AFM-2 as manufactured by Thomas and Betts, Corp

Accepts up to 3 power receptacles

AFM-4 as manufactured by Thomas and Betts, Corp

Accepts up to 6 power receptacles

AFM-6 as manufactured by Thomas and Betts, Corp

Accepts up to 2 power receptacles

AFM-6S as manufactured by Thomas and Betts, Corp

Accepts up to 6 power receptacles

AFM-6V as manufactured by Thomas and Betts, Corp

Accepts up to 10 power receptacles

AFM-8 as manufactured by Thomas and Betts, Corp

3-compartment floor box for raised access floors

AFM-4R Access Floor Module as manufactured by Thomas and Betts, Corp

PRE-SET INSERT

Pre-Set shall be installed with conduit sizes as shown on the drawings

GAB-4 has standard 3/4 inch (19 mm) conduit thread on power side, in and out

GAB-6 has standard 3/4 inch (19 mm) conduit thread on power side, in and out

GAB-8-S has 3/4 inch (19 mm) KO on power side, in and out. 1-1/4 inches (32 mm) KO on data side, in and out

Pre-set: GAB-4

Pre-set: GAB-6

Pre-set: GAB-8-S

Activation Unit:

8 inches by 8 inches (203 mm by 203 mm) nominal size steel box (Refer to AFM-4)

8 inches by 10 inches (203 mm by 254 inches) nominal size steel box (Refer to AFM-6)

10 inches by 10 inches (254 mm by 254 mm) nominal size steel box (Refer to AFM-8)

2. When you are finished making selections:

Generate Spec: Word     WP   or   RTF