Steel Framing and Metal Lath Systems


13191 Crossroads Pkwy. N.
Suite 325
City of Industry, CA 91746
Toll Free: 800-775-2362
Fax: 626-330-7598


Founded in 1974, CEMCO is recognized as one of the largest manufacturers of steel framing and metal lath systems in the United States. CEMCO has built its reputation on the finest in quality material, using only mill certified PRIME steel. With over 60 state-of-the-art roll formers, CEMCO is able to handle any small and large construction projects. CEMCO distributes our products throughout the United States, Canada, Mexico, and the Pacific Rim.


{{}} {{this.hide}} Steel Framing Products

Exterior Structural & Curtain wall image

Exterior Structural & Curtain wall

These studs and track are manufactured from mill certified galvanized prime steel, and are designed for use in curtain-wall and load bearing applications. Thicknesses range from 33 mils (20 ga.) to 118 mils (10 ga.). Flange or leg sizes for both studs and track range from 1 1/4" all the way up to 3-1/2". These products are produced with a standard G-60 coating, but are also available with a G-90 upon special request.
Rated 5 based on 1 product reviews
Sure-Span® Floor Joist System image

Sure-Span® Floor Joist System

Sure-Span® is a revolutionary floor joist system specifically developed by CEMCO for both commercial and residential construction projects. The trapezoidal punch-outs enable several trades, such as plumbing, HVAC, technology, and electrical to take advantage of access route for various services while sturdy, long floor spans are maintained. Sure-Span® SSCJ joists are produced in depths ranging from 7 1/4 inches up to 14 inches. The corresponding SSRT Rim Tracks are produced with pre-spaced clips at 12, 16, 19.2 or 24 inch on-center configurations for ease of installation. All Sure-Span® components are manufactured from the same high-quality mill certified prime steel galvanized by the hot-dipped process in both G-60 and G-90.
Rated 5 based on 1 product reviews
Accessories image


These critical components are often combined with our stud and track systems to provide for extra bracing, furring, backing, and sound-dampening requirements. The available products in this group include, resilient channels, furring/hat Channels, backing Plate/flat strapping cold-Rolled/u-Channel and various angles, clips, and brake shapes. 

Furring Channels 

Trims and Finishes

Sound Channels

Rated 5 based on 1 product reviews
Drywall Framing System image

Drywall Framing System - ViperStud®

CEMCO's solution for interior non-load bearing steel framing is the ViperStud® Drywall Framing System. ViperStud® is a lighter, stronger, and much better option than other products available on the market. Made from high-strength steel, and formed with ViperRib technology, ViperStud® is the flat-steel alternative that is sweeping the industry from coast to coast.
Rated 5 based on 1 product reviews
FAS® Track 1000 and DDA™ Head-of-Wall Systems image

FAS® Track 1000 and DDA™ Head-of-Wall Systems

The contractors and architects have spoken and CEMCO has responded by introducing the latest iteration of the FAS Track product line A"FAS Track 1000A". FAS Track 1000 is the most efficient way to provide superior fire, smoke and sound protection within a composite deflection track according to UL-2079 without the use of fire caulking.
Rated 5 based on 1 product reviews
Slotted Track image

Slotted Track

"CST" and "SLP-TRK®" brand slotted slip tracks are fabricated in standard web depths and thicknesses. All CEMCO CST brand and Brady SLP-TRK® brand slotted slip tracks are produced from G40 coated steel for 18 and 33 mil products. All others are manufactured with G60 coating. G90 is available upon request.
Rated 5 based on 1 product reviews
Sure-Board® For Shear image

Sure-Board® For Shear

Sure-Board® is a patented revolutionary product designed for todayA's ever changing construction industry. Developed out of the need for a stronger, longer lasting and more reliable shear wall panel, Sure-Board® is the best choice for Engineers, Architects, and Contractors alike.

By combining the strength of steel with a myriad of gypsum-based and substrate panels, Sure-BoardA's composite characteristics provide unsurpassed resistance against loads imposed by seismic activity, hurricane force winds, fire, mold, impact and blast while actively reducing sound transmission.
Rated 5 based on 1 product reviews
Rough Openings image

Rough Openings - ProXHeader

The unique shape of ProXHeader is engineered to carry higher load values with less steel.

Most wall openings can be supported with a single piece header and for wider openings an insert member is added for additional strength. The patented system utilizes an internal clip that fastens to the vertical Jamb stud(s). The ProXHeader member snaps into place and leaves a flush surface for the application of drywall. Material and labor costs are sharply reduced and construction productivity is increased. Installation is simplified and can be accomplished with a single framer. As with a traditional built-up box header the need to measure, cut and fit several stud and track components is eliminated. Additionally there is no welding and much less screwing when using ProXHeader.
Rated 5 based on 1 product reviews
Shaftwall / Area Separation Walls image

Shaftwall / Area Separation Walls

The United States Gypsum Co. in partnership with CEMCO, presents the construction industryA's best performing shaftwall, fire wall, and party wall components; The SHEETROCK Brand Shaft Wall System. CEMCO is the licensed manufacturer of these products, which include the CH-Stud, J-Track, H-Stud, and C-Runner components. A successful history of quality and productivity are the basis for this long-standing partnership between USG, the largest gypsum wallboard producer in the world, and CEMCO, the premier manufacturer of cold-formed steel framing products in the Western United States.
Rated 5 based on 1 product reviews

{{}} {{this.hide}} Metal Lath Products

Expanded Metal Lath image

Expanded Metal Lath

CEMCO's versatile metal lath is ideal as a plaster base and reinforcement for all types of construction in walls, ceilings, and fireproofing of steel beams and columns. Easy to cut and form to ornamental plaster work. Provides ample keying for scratch coat and is commonly used for plaster machine application. The expanded metal lath is available in 1.75, 2.5, and 3.4 pounds per square yard. All three of these are available in either flat, self-furred (dimpled of grooved), or in combination with paper-backing with D, Double-D, or K paper.
Rated 5 based on 1 product reviews

{{}} {{this.hide}} Metal Lath Accessories

Expansion Joint image

Expansion Joint

As the premier provider of metal lath products to the construction industry, CEMCO offers expansion joints and expanded corner beads manufactured by Niles Building Products, Inc. These expanded metal trims and expansion joints are produced from hot-dipped galvanized steel that comply with ASTM C1063 and C841. Some products are also available in pure zinc on a special order basis. Corner trims are available in 1-A or 2-A Reinforced configurations in 8', 9', 10', and 12' lengths carefully packaged in heavy-duty cardboard boxes for easy shipment and storage.
Rated 5 based on 1 product reviews
Corner Accessories image

Corner Accessories

CEMCO provides along with its extensive metal lath and accessory product line, corner accessories for every application used by today's contractors. CEMCOCORNER, a welded wire product is available in standard lengths to accommodate just about every situation seen in the field. CEMCO also provides expanded corners for exterior plaster systems in both 1A and reinforced 2A configurations, also available in various lengths.
Rated 5 based on 1 product reviews
Screeds, Casings, Weeps image

Screeds, Casings, Weeps

CEMCO manufactures several types of weeps, screeds, and casing beads for the exterior plaster industry. All are manufactured to tight tolerances using hot dipped galvanized steel that meets ASTM, Federal Specification, and FHA specifications.
Rated 5 based on 1 product reviews
Patches image


Patches are a recent development by CEMCO based on a timeless use of 2.5 diamond lath, but manufactured in strips or A'patchesA' to be used over door and window corners to greatly reduce cracking, by reinforcing stress areas. Patches can also be used as grout stop in masonry applications.
Rated 5 based on 1 product reviews

{{}} {{this.hide}} CEMCO Project Profiles

Gables Cherry Creek image

Gables Cherry Creek

The Gables Cherry Creek Apartment project is an 8 story/297 unit apartment community offering incredible amenities that include concierge services, electric vehicle charging stations, several fitness studios, a resident lounge and other luxury-type conveniences. Owned by Smith/Jones partners Gables is considered one of the premier apartment communities in the metropolitan Denver area. Constructed using sustainable and locally sourced building materials, Gables has integrated into the community several "green" options such as Energy Star appliances, low VOC finishes, and on-site recycling services. Located in Denver Colorado, this new community offers views of both Cherry Creek and the Rocky Mountains.
Rated 5 based on 1 product reviews
International Marketplace in Honolulu, HI image

International Marketplace in Honolulu, HI

In the heart of Waikiki, the International Market Place was known for 60-years as an outdoor bazaar, lined with kiosks selling kitschy jewelry and cheap souvenirs and for having a 150 year-old banyan tree as its centerpiece. The banyan tree still remains but the property has undergone a complete makeover since August 2014, when Taubman Centers Inc began their development of the upscale International Market Place retail center.
Rated 5 based on 1 product reviews

Last Update: 2019-12-20