doors and frames
CONTACT INFO
5224 FM 802
P. O. Box 4560
P. O. Box 4560
Brownsville, TX 78523
WARRANTY
COMPANY OVERVIEW
In 1974, Chem-Pruf founder William V. Pitt designed, engineered and built the first successful industrial fiberglass door that would not bow, rack or warp. This remarkable door was made possible by a unique, now patented, one-piece fiberglass stile and rail system. Tough, corrosion-resistant fiberglass door plates which form the faces of the door were permanently bonded to the stile and rail to create the finished corrosion resistant door. With an idea, a feat of engineering and a wealth of manufacturing know-how, Bill Pitt founded not only Chem-Pruf Door Company but an entire industry.
Chem-Pruf continues to set the standards with industry "firsts":
|
ALL PRODUCTS
{{this.show}} {{this.hide}} Fiberglass Doors
Standard Doors
Chem-Pruf fiberglass doors systems are engineered and manufactured to withstand the most corrosive environments from saltwater, chemicals, detergents, chlorine, acid, to humidity and more. Every fiberglass door is custom manufactured to your exact requirements. Plus, with Chem-Pruf's Total Opening Solution, installation is a snap, the FRP doors ship pre-assembled in individual crates ready to be hung.
Fire Rated Doors
Chem-Pruf fiberglass fire rated doors systems have been tested, approved and labeled for both neutral and positive pressure by Warnock-Hersey (WHI).
Neutral Pressure Fire Doors - Chem-Pruf Fiberglass Door Systems are approved for neutral/negative pressure and tested for 45 minutes, 60 minutes and 90 minutes. Chem-Pruf FRP door systems (door and frame) are labeled by Warnock-Hersey (WHI).
Positive Pressure Fire Doors - Chem-Pruf Fiberglass Door Systems are also approved for positive pressure and are tested for 45 minutes, 60 minutes and 90 minutes with UBC 7-2-1997 and are labeled like our negative pressure doors. In addition, Chem-Pruf FRP door systems meet UL 10c NFPA 252.
Door Panel - The FRP fire rated doors are 1-3/4" thick with flush, seamless construction and are manufactured using chemically proven fire retardant resins. Every Chem-Pruf product is custom manufactured to the highest manufacturing standards and strict quality control and are guaranteed for life against failure due to corrosion.
Neutral Pressure Fire Doors - Chem-Pruf Fiberglass Door Systems are approved for neutral/negative pressure and tested for 45 minutes, 60 minutes and 90 minutes. Chem-Pruf FRP door systems (door and frame) are labeled by Warnock-Hersey (WHI).
Positive Pressure Fire Doors - Chem-Pruf Fiberglass Door Systems are also approved for positive pressure and are tested for 45 minutes, 60 minutes and 90 minutes with UBC 7-2-1997 and are labeled like our negative pressure doors. In addition, Chem-Pruf FRP door systems meet UL 10c NFPA 252.
Door Panel - The FRP fire rated doors are 1-3/4" thick with flush, seamless construction and are manufactured using chemically proven fire retardant resins. Every Chem-Pruf product is custom manufactured to the highest manufacturing standards and strict quality control and are guaranteed for life against failure due to corrosion.
FDA/USDA Doors
Chem-Pruf fiberglass FDA/USDA door systems are perfect for applications that must endure repeated washdowns and rigorous cleanings with corrosive compounds such as acids, disinfectants, cleaning solutions, spermicides and scaling acid and bleach. Chem-Pruf's FDA/USDA accepted doors also comply with NIH Standards and when desired are available with up to 90 minute UL label for fire rating.
Door Panel - The FDA/USDA doors are 1-3/4" thick and are manufactured using a specifically tailored resin that resists contaminants typically found in food processing applications. The seamless construction eliminates crevices, gaps, seams and other areas where potential bacteria buildup can occur.
Door Panel - The FDA/USDA doors are 1-3/4" thick and are manufactured using a specifically tailored resin that resists contaminants typically found in food processing applications. The seamless construction eliminates crevices, gaps, seams and other areas where potential bacteria buildup can occur.
Pharmaceutical Doors
Chem-Pruf's FRP Pharmaceutical Door is a smart addition to any facility requiring a sterile environment. This tough, hygienic door is completely seamless, eliminating cracks, seams and gaps where bacteria can hide. The smooth glossy gelcoat finish, one piece construction and molded in pharmaceutical window makes the Chem-Pruf FRP door the ideal choice for Pharmaceutical Manufacturing Facilities. Plus, Chem-Pruf's FRP doors comply with NIH Standards and when desired are available with up to 90 minute UL label for fire rating.
Door Panel - The Pharmaceutical Doors are 1-3/4" thick and are manufactured using a specifically tailored resin that resists contaminants typically found in pharmaceutical/clean room environments. The seamless construction eliminates crevices, gaps, seams and other areas where potential bacteria buildup can occur. The FRP door can stand up to daily washdowns and rigorous cleaning with harsh chemicals.
Door Panel - The Pharmaceutical Doors are 1-3/4" thick and are manufactured using a specifically tailored resin that resists contaminants typically found in pharmaceutical/clean room environments. The seamless construction eliminates crevices, gaps, seams and other areas where potential bacteria buildup can occur. The FRP door can stand up to daily washdowns and rigorous cleaning with harsh chemicals.
Hurricane/FBC Rated Doors
Chem-Pruf Storm Doors have received Florida Building Code (FBC), IBC and Texas Dept. of Insurance (TDI) approval for installation in high wind coastal conditions. All Storm Door models meet or exceed the standards set for large missile impact (ASTM-E1886/1996 missile level D), both positive and negative cycle pressure and wind load. From hotels along the beach to offshore oil platform to public facilities to marine transportation manufacturing Chem-Pruf has a fiberglass door that is designed to withstand the harsh weather that storms can bring. When required 90 minute UL label for fire rating is available.
Ballistic Doors
Chem-Pruf Ballistic Doors have successfully completed the test protocols in accordance with UL 752 and conform to UL752 "Standard for Safety and Bullet Resisting Equipment". Chem-Pruf's ballistic door models meet and exceed the standards set for large missile impact (ASTM-E1886/1996 missile level D), ballistic resistant protective materials (NIJ-STD-0108.01), and heat transfer properites of materials (ASTM C 518), and mechanical properties of fasteners (ASTM D1761).
Blast Doors
Chem-Pruf Blast Doors are designed to protect personnel and property from explosions and explosion borne missiles. Some applications include chemical, paint or hazardous material storage rooms, pharmaceutical facilities, bioscience and nanotechnology research buildings, nuclear power stations, ammunition depots and arsenal storage facilities. Chem-Pruf Blast Doors meet and exceed industry standard for Blast Proof Doors including AAMA, 920-03 specification for operating cycle performance of side-hinged exterior door systems, ANSI A250.4-2001 test procedure and acceptance criteria for physical endurance for steel doors, frames, frame anchors and hardware reinforcements, and NWWDA TM-7 test method to determine the physical endurance of wood doors and associated hardware under accelerated operating conditions. Please see certifications for a complete list.
FEMA Doors
Tornadoes, hurricanes and other violent weather can produce winds in excess of 250mph, turning items like cars and trees into deadly projectiles. Chem-Pruf's FEMA door can withstand these forces and have been tested and labeled in accordance with FEMA 320 / ICC 500 requirements for above ground storm shelters for design and construction. FEMA 320 states that swinging door assemblies should resist a static pressure of 1.37-psi for a 5-second period. The tornado test criterion uses a 3 impacts of 15-lb. 2"x4" wood board traveling horizontally at 100-mph, which corresponds to a 250-mph wind. The ICC-500 requirement states that the pressure test load should include a safety factor of 1.2. This pressure relates to a 250 mph ground speed tornado and the door installed in Zones 4&5 per ASCE 7-05 for a corner zone with the negative pressures being greater than the positive pressures.
Custom Doors
Chem-Pruf fiberglass doors and frames are custom manufactured and made to order. Whatever configuration you need for your application we can provide. From arched doors, raised panels, monorail cut-outs, transoms, custom lites, custom colors and custom designs are no problem for Chem-Pruf's experienced craftsmen. Whatever the challenge, Chem-Pruf has the solution.
Our engineers and sales staff are eager to help create the exact door for your unique requirements. Call us today at 800-444-6924 and let us show you why we are #1 in the industry in designing and manufacturing custom fiberglass doors. Plus, like all our fiberglass doors, our custom doors are guaranteed not to fail due to corrosion for life.
Our engineers and sales staff are eager to help create the exact door for your unique requirements. Call us today at 800-444-6924 and let us show you why we are #1 in the industry in designing and manufacturing custom fiberglass doors. Plus, like all our fiberglass doors, our custom doors are guaranteed not to fail due to corrosion for life.
{{this.show}} {{this.hide}} FRP Door Frames
Style 4 - Standard Frame
Precision engineered, color-matched FRP frames are the perfect compliment to your Chem-Pruf door. All internal components are non-organic and completely encapsulated, leaving a frame that is free of cavities, exposed reinforcements and fasteners. Additional reinforcements can be placed in the mold cavity and electric components can be added to easily accommodate all specialty hardware. Chem-Pruf frames are perfect for existing wall conditions and single frames purchased with hinges are fully assembled, easy to install, repair and maintain, plus they require no painting or finishing.
STYLE 4 DOOR FRAME - STANDARD
Chem-Pruf's Style 4 equal rabbet frame has a profile of 2" x 5 3/4". This frame conforms to SDI standard dimensions and easily adapts to all types of wall construction with a thickness of 5 3/4" or greater. The header will be 2" unless otherwise specified (see below).
STYLE 4 DOOR FRAME - STANDARD
Chem-Pruf's Style 4 equal rabbet frame has a profile of 2" x 5 3/4". This frame conforms to SDI standard dimensions and easily adapts to all types of wall construction with a thickness of 5 3/4" or greater. The header will be 2" unless otherwise specified (see below).
Style 4.4 - Standard Frame
Chem-Pruf's Style 4.4 single rabbet frame has a profile of 2" x 4". This frame accommodates all types of wall construction with a thickness of 4" or greater. The header will be 2" unless otherwise specified
Style 1 Door Frame - Specialty
Chem-Pruf's Style 1 double rabbet frame has a profile of 3/4" x 5 3/4". This frame is solid fiberglass and its narrow profile is perfect for maximizing the size of the door opening. This frame can also be manufactured at depths of 3 1/2" and 4".
Style 2 Door Frame - Specialty
Chem-Pruf's Style 2 double rabbet frame has a profile of 3/4" x 5 3/4" with a fixed 2 5/8" return designed to trim the wall, concealing rough and unfinished wall surfaces. The fixed flange is always to the door side. 1/8" x 2 5/8" angle trim is available to completely trim an opening with a wall thickness up to 18". This frame is solid fiberglass and its narrow profile is perfect for maximizing the size of the door opening. Can also be manufactured at depths of 3 1/2" and 4".
Style 11 Door Frame - Specialty
Chem-Pruf's Style 11 single rabbet frame has a mold profile of 2" x 9", but can be manufactured in 1/4" increments from 4-1/4" in width to the maximum mold width of 9". This custom frame is ideal for varying wall thicknesses of 6" or greater. The header will be 2" unless otherwise specified.
{{this.show}} {{this.hide}} Door Accessories
Door Windows
The Chem-Pruf FRP (fiberglass) window frame systems are the finest in the industry. Our gelcoated, molded resin-transfer system produces a frame of unmatched quality and corrosion resistance. The 25 mil gelcoat finish molds the color into the frame. It never needs painting and is virtually maintenance-free. Frames can be manufactured to any specification and are available in a wide variety of styles.
Door Louvers
Chem-Pruf offers custom sized and colored inverted V louvers to be used in doors that best suit your application and air flow needs. Screens can be mounted to prevent bugs and other unwanted debris from entering. Chem-Pruf inverted V louvers are of flush construction. The gel coat layer is integrally molded as the part is made, and is the primary barrier against environmental and chemical attack. Pultruded glass products do not have the molded-in gel coat protective barrier. Resin transfer of the louver vanes ensures uniformity in color and size.
Astragals
Chem-pruf FRP accessories are designed and manufactured to complement all Chem-Pruf FRP doors and frames. FRP thresholds, astragals, and sweeps are also available in matching colors to complete your fiberglass door system for protection against corrosive environments.
Door Sweeps
hem-pruf FRP accessories are designed and manufactured to complement all Chem-Pruf FRP doors and frames. FRP thresholds, astragals, and sweeps are also available in matching colors to complete your fiberglass door system for protection against corrosive environments.
Thresholds
Chem-pruf FRP accessories are designed and manufactured to complement all Chem-Pruf FRP doors and frames. FRP thresholds, astragals, and sweeps are also available in matching colors to complete your fiberglass door system for protection against corrosive environments.
Weatherstrips & Gaskets
Chem-pruf FRP accessories are designed and manufactured to complement all Chem-Pruf FRP doors and frames. FRP thresholds, astragals, and sweeps are also available in matching colors to complete your fiberglass door system for protection against corrosive environments.
{{this.show}} {{this.hide}} Hardware
Closers
All standard closers offered by Chem-Pruf are heavy duty and have a complete range of separate control adjustments for sweep speed, latch speed, back check cushioning and back check positioning.
Passage Sets
All passage sets meet ANSI A 156.2 Grade 1 requirements and all are UL listed for a fire rating of up to 3 hours. They are designed for extra heavy duty residential, commercial and industrial applications.
Locksets
Many types of locksets are available. These locksets are designed for extra heavy duty residential, commercial and industrial applications where security is a major concern:
Panic Devices
Push bar type panic devices are standard with rim and mortise exit devices also available. The following functions are available
{{this.show}} {{this.hide}} FRP Wall Windows
Style 5 Wall Window - Standard
Chem-Pruf has numerous wall window frames to choose from that will enhance the look of a wall window. These frames were engineered to be as corrosion resistant as can be made, and strong enough to survive far beyond that of any wall window frame made today. Our frames have a 25-mils gel coat as the outer surface, which is molded in. This provides the maximum corrosion resistance possible. Chem-Pruf wall window frames use various types of inorganic cores to reduce weight and provide structural rigidity. Chem-Pruf wall window frames are manufactured by resin transfer molding in closed rigid molds assuring uniformity in color and size. The wall window units are assembled at Chem-Pruf to assure that the unit is ready for installation upon receipt. When it comes to choosing colors for wall window frames, architects and engineers can select any of Chem-Pruf's standard colors, or the color can be custom matched. This is an advantage over standard aluminum window frames, which come in only a few colors. Chem-Pruf's gel coat finish is molded in at the time of manufacture. It is permanent, and about half the cost of paint and field painting. The gel coat finish is the first line of defense against chemical attack and is very cost effective. In comparison to painted type windows, which can be high maintenance and expensive, Chem-Pruf®'s gel coated products require minimal maintenance, and will never need painting. Below are three types of Wall Windows we have available:
STYLE 5 WALL WINDOW - STANDARD
Chem-Pruf's Style 5 Wall Window is a 1 1/4 inch profile, 5 3/4 inch wide single rabbet fixed window frame with a drainable stop. The drainable stop prevents buildup of dirt or trash on the sill.
STYLE 5 WALL WINDOW - STANDARD
Chem-Pruf's Style 5 Wall Window is a 1 1/4 inch profile, 5 3/4 inch wide single rabbet fixed window frame with a drainable stop. The drainable stop prevents buildup of dirt or trash on the sill.
Style 6 Wall Window - Standard
Chem-Pruf's Style 6 Wall Window is a 4 inch single rabbet, 1 3/4 inch profile frame with a self-draining stop.
Style 7 Wall Window - Standard
Chem-Pruf's Style 7 Wall Window is a 7 1/4 inch single rabbet, 2 13/16 inch profile frame with a self-draining stop.
Style 4 Wall Window - Standard
Chem-Pruf's Style 4 Wall Window is a 2 inch profile 5 3/4" wide double rabbet fixed window frame.
{{this.show}} {{this.hide}} FRP Wall louvers
Wall louvers
Corrosion-Resistant FRP Louvers
The perfect solution to a corrosive environment, Chem-Pruf FRP wall louvers provide years of low-maintenance, corrosion-resistant service. All parts - jambs, headers, sills, slats and vanes - are manufactured from gel-coated, fiberglass-reinforced polymers (FRP). Resins are tailored for the exact conditions where the louvers will be installed.
Louers are of a flush constructions, with a gelcoated outer surface of approximately 25 mills (equal to 50-60 coats of paint). The gelcoat is molded into the laminate and utilizes the same resin chemistry used in the glass resin substrate. Gelcoat serves as the primary barrier against corrosive attack and can be formulated in a wide variety of colors.
In the fabrication process, following the gelcoating, an envelope consisting of 2 ounces of continuous-strand fiberglass is infused with resin to form a completely solid, corrosion -resistant part. Bosses for securing and positioning the slats or vanes are integrally molded at one time as the jambs are formed.
All reinforcing resins contain halogenated additive or coreactants plus anitomy trioxide. Resins yield a flame spread of 25 or less per ASTM E-84 and are self-extinguishing per ASTM D-635. The use of ATH (hydrated aluminum powder) to lower smoke propagation and suppress ignitability is frequently used.
The perfect solution to a corrosive environment, Chem-Pruf FRP wall louvers provide years of low-maintenance, corrosion-resistant service. All parts - jambs, headers, sills, slats and vanes - are manufactured from gel-coated, fiberglass-reinforced polymers (FRP). Resins are tailored for the exact conditions where the louvers will be installed.
Louers are of a flush constructions, with a gelcoated outer surface of approximately 25 mills (equal to 50-60 coats of paint). The gelcoat is molded into the laminate and utilizes the same resin chemistry used in the glass resin substrate. Gelcoat serves as the primary barrier against corrosive attack and can be formulated in a wide variety of colors.
In the fabrication process, following the gelcoating, an envelope consisting of 2 ounces of continuous-strand fiberglass is infused with resin to form a completely solid, corrosion -resistant part. Bosses for securing and positioning the slats or vanes are integrally molded at one time as the jambs are formed.
All reinforcing resins contain halogenated additive or coreactants plus anitomy trioxide. Resins yield a flame spread of 25 or less per ASTM E-84 and are self-extinguishing per ASTM D-635. The use of ATH (hydrated aluminum powder) to lower smoke propagation and suppress ignitability is frequently used.
{{this.show}} {{this.hide}} Color Information
Textures and Finishes
Chem-Pruf uses only the highest quality gelcoat in the manufacture of our fiberglass products with 25 mil of the specified color integrally molded in as the part is made. The gelcoat is cured within a temperature range of 120oF to 170oF creating an impermeable outer surface, uniform color throughout and a permanent homogeneous bond with the resin/fiberglass substrate beneath. This superior finish offers the first line of defense against environmental and chemical attack.
{{this.show}} {{this.hide}} Green Statement
Green Statement
Chem-Pruf Door Company Ltd is committed to protecting the environment and to preserving resources by producing products with long service lives and minimal or no upkeep requirements - and that includes no need ever to paint, eliminating possible adverse environmental impact from that activity. This longevity, of course, also results in less frequent replacement and consequent lower long-term manufacturing need for energy and other non-renewable materials. Many of our products are also designed and manufactured to protect people and property, providing security and health protection in specific applications such as banking, pharmaceuticals, amusement parks, food processing plants, and chemical plants and laboratories, as well as in homes, public building, condos, hotels, and apartments, especially in areas where impact, wind and water resistance, and security are major considerations. Our easy to maintain products resist corrosion and are built so that, with proper installation, use, and maintenance, they eliminate worries over mold, fungi or other opportunistic infestations. Chem-Pruf is the product of choice for those who think not only of today, but also of tomorrow.
{{this.show}} {{this.hide}} Photo Gallery
Last Update: 2019-04-25