The Protectosil® SC product range keeps facades clean.
Application Areas
Protectosil® Water Repellents
Protectosil® water repellent products penetrate deep into the substrate and keep water out.
Application Areas
LEED Product Information
A clear, penetrating, breathable VOC-compliant surface treatment for use on concrete. The unique 100% silane treatment (no solvent) penetrates the substrate and chemically bonds with silica to form a permanent attachment of the water repellent molecule. Creates a deep hydrophobic layer that prevents water and waterborne contaminants from entering the substrate and causing premature deterioration. By combining low surface tension with a tailored rate of reaction, Protectosil® BHN is able to move through the moisture boundary layer that lines the pore structure of the substrate. This permits the development of uniform gradient permeation - a consistent level of protection throughout the entire depth of penetration - allowing for longer treatment life, especially on wearing surfaces.
Technical Data Sheet
Health Product Declaration
LEED Product Information
A clear penetrating breathable VOC compliant surface treatment. The unique silane treatment penetrates into the substrate and chemically bonds with to form a permanent attachment of the water repellent molecule. In addition, an oil repellent additive resists the ingress of motor oil, transmission fluid, diesel fuel and other automotive fluids. This additive also repels food products such as mustard, ketchup, food grease, milk, wine, beer soft drinks. Creates a deep hydrophobic layer which prevents the ingress of water and waterborne contaminants entering the substrate and causing premature deterioration. By combining a low surface tension with a tailored of reaction the Protectosil® BHN Plus is able to move through the moisture boundary layer which lines the per of the substrate. This permits the development of uniform gradient permeation or a consistent level op protection the entire depth of penetration. This allows for a the treatment especially on wearing surfaces.
Technical Data Sheet
LEED Product Information
A clear, penetrating, breathable water repellent for use on exterior above-grade concrete masonry units, brick masonry and most natural stones. Provides resistance against water, alkali attack, acid rain and waterborne staining. Penetrates into the substrate and chemically bonds with silica to form a permanent attachment of the water repellent molecule. Protectosil® CHEM-TRETE® PB 100 is especially suited for making porous substrates such as split-face block water repellent. This water repellent effect stands up against wind-driven rain.
Technical Data Sheet
Health Product Declaration
LEED Product Information
A clear, penetrating, breathable water repellent for use on concrete, brick, concrete masonry units and some natural stones. Prevents water and waterborne contaminants from entering the substrate and causing premature deterioration. Penetrates into the substrate and chemically bonds with silica to form a permanent attachment of the water repellent molecule. Protectosil® CHEM-TRETE® PB VOC is especially suited for making porous substrates such as split-face block water repellent. This water repellent effect stands up against wind-driven rain.
Technical Data Sheet
LEED Product Information
Protectosil® 300 S is a solvent-free silane treatment that penetrates into the substrate and chemically bonds with silica to form a permanent attachment of the water repellent molecule. Creates a deep hydrophobic layer which prevents the ingress of water and water borne contaminants from entering the substrate and causing premature deterioration.
Technical Data Sheet
Protectosil® CHEM-TRETE® BSM 400 brings you the next generation in silane technology. Our chemists have developed a pure silane that yields a water repellent with the longest service life available, unsurpassed performance on brick masonry and the lowest possible levels of volatile organic compounds. Protectosil® CHEM-TRETE® BSM 400 can be applied in the most extreme temperature conditions without changing the surface appearance of the substrate.
Technical Data Sheet - BSM 400
Technical Data Sheet - BSM 400A
Health Product Declaration
LEED Product Information
A clear, penetrating, breathable water repellent for use on exterior above-grade concrete, brick masonry, concrete masonry units and some natural stones. Penetrates the surface and bonds chemically to the substrate, resulting in permanent attachment of the water repellent molecule. Protectosil® CHEM-TRETE® 40 VOC is not a coating and as a result will not discolor or change the surface appearance in anyway.
Technical Data Sheet
LEED Product Information
A clear, penetrating, breathable water repellent for use on brick, concrete masonry units and some natural stones.
Technical Data Sheet
A clear, penetrating, breathable water repellent and consolidant for use on exterior above-grade calcareous stone such as limestone and marble, brick masonry and natural stones. Penetrates the surface and bonds chemically to the substrate, resulting in permanent attachment of the water repellent molecule. Protectosil® CHEM-TRETE® 40 D is not a coating and as a result will not change the surface appearance of the substrate.
Technical Data Sheet
A clear, penetrating, waterborne, breathable water repellent for use on concrete. A ready-to-use, low-VOC silane emulsion. Reduces the ingress of water and waterborne contaminants that cause premature deterioration of the substrate. Penetrates the substrate and chemically bonds with silica to form a permanent attachment of the water repellent molecule. Protectosil® AQUA-TRETE® 40 water repellent is especially suited for application when solvent borne products are not acceptable, as in states that have VOC regulations for AIM coatings. Protectosil® AQUA-TRETE® 40 meets most national and state VOC regulations.
Technical Data Sheet
Health Product Declaration
LEED Product Information
A penetrating, waterborne, vapor-permeable water repellent for use on concrete, brick, concrete masonry units and some natural stones. A ready-to-use, low-VOC, silane/siloxane emulsion.
Technical Data Sheet
Protectosil® AQUA-TRETE® 340 is a clear, breathable, penetrating, aqueous water no repellent intended for use on concrete, brick, and masonry. This product reduces and prevents the ingress of water and waterborne contaminants by chemically bonding with silica within a substrate. This permanently bonds the water repellent to the surface, preventing water and waterborne contaminants from entering the surface.
Technical Data Sheet
Safety Data Sheet
Protectosil® Corrosion Control
Increase service life and reduce maintenance of steel reinforced concrete.
Application Areas
A surface-applied clear liquid that penetrates concrete and provides an organofunctional molecule to inhibit the electro chemical corrosion process between the rebar and the chloride ions, and oxygen and moisture within the concrete.
Technical Data Sheet
Protectosil® Graffiti Control
Protectosil ANTIGRAFFITI® ensures that the color can be easily removed.
Technical Data Sheet
Application Areas
LEED Product Information
Protectosil® ANTIGRAFFITI protects surfaces to allow easy removal of a wide variety of graffiti, including spray paint, permanent marker, ink, bituminous paints, asphalt sealers, and other solvent or waterborne paints. Because of Protectosil® ANTIGRAFFITI's superior performance, standard non hazardous cleaners and low-pressure water blasting are sufficient removal methods for most graffiti.
Technical Data Sheet
Health Product Declaration
LEED Product Information
Protectosil® Easy to Clean Surfaces
The Protectosil® SC product range keeps facades clean.
Application Areas
This product is a clear, breathable, zero-VOC treatment for concrete, brick, concrete masonry units, tiles, EFIS, pavers, natural stone, paint and other building materials. Protectosil® AQUA-TRETE® SG is a multifunctional system that provides superior water and stain resistance and also performs as a sacrificial antigraffiti coating. The primary function of Protectosil® AQUA-TRETE® SG is to repel water- and oilbased materials that cause staining, thereby making cleaning easier. The unique multifunctional chemistry makes the Protectosil® AQUA-TRETE® SG inherently UV stable. This feature allows longer surface repellency than is offered by competing technologies. Protectosil® AQUA-TRETE® SG decreases such problems as dirt buildup, staining and graffiti tagging.
Technical Data Sheet
Health Product Declaration
LEED Product Information
Protectosil® Crack Sealer
New Crack Sealer for Concrete
Protectosil® Degadeck® CSS is a two component, low viscosity methylmethacrylate (MMA) resin for use onhorizontal concrete surfaces. Protectosil® Degadeck" CSS is formulated to have excellent penetration into thecrack while maintaining high compressive and flexural strengths. In addition, the product cures quickly tominimize the time in which the traffic lanes or parking decks need to be shut down for repairs.
Technical Data Sheet
Project Presentation
Global Reference Objects 30 Years of Expertise
Hundreds of infrastructure buildings like bridges and tunnels as well as historical monuments have been durably protected with Protectosil® from deterioration by corrosion, harmful environmental influences and graffiti attacks.
Protectosil® - Innovative Building Protection
Several examples show how Protectosil® stops deterioration and extends the service life of buildings significantly.