Keeps running when AC power has been lost. A solar power version is ideal where AC power is unavailable. Powerful Quadra Drive DC Motor provides extremely quiet, long lasting operation.

Keeps running when AC power has been lost. A solar power version is ideal where AC power is unavailable. Powerful Quadra Drive DC Motor provides extremely quiet, long lasting operation.

The 1175 overhead gate operator is designed to operate overhead type vehicular gates mounted on jamb track or jamb type hardware. Overhead gates are typically used in underground parking applications where headroom is minimal. The low profile design and quiet operation of the 1175 makes it ideal for these applications.

Actuator offers convenience and reliability in a compact design. The actuator mounts directly on your gate and pilaster, simplifying installation and eliminating the need for concrete pads.

This operator offers convenience and reliability in a compact design. The Model 6004 is ideal to operate swing gates that are mounted on large columns.

These operators are designed so that they can be either pad or post mounted without any costly and time consuming field modifications.

The DKS 6002, 6003, 6004 and 6400 swing gate operators can be Solar Powered by using any of our Solar Control Box options. Our new 0.0 Amp SBPD (Pat Pend) circuit* insures that battery power is used only when the gate operator is activated.

The 6300 series operators are designed to operate vehicular swing gates in residential, commercial and industrial applications. These operators are designed so that they can be either pad or post mounted without any costly and time consuming field modifications.

The Model 6400 installs underground making it virtually invisible and satisfies the most sophisticated automation needs without being detrimental to the original gate design.

These operators offer convenience, reliability and quiet operation in an aesthetically pleasing design. Operators are designed to operate vehicular swing gates in residential, commercial and industrial applications for both single and bi-parting gates.

The 6550 operator is designed to operate very large vehicular swing gates in commercial and industrial applications. Secondary operators are used in bi‐parting (dual) gate applications , and cannot be used as a stand-alone device.

These operators offer convenience, reliability and safe operation in a small, compact design. These operators are ideally used in residential, commercial or industrial high-use applications.

Designed to operate vehicular slide gates in residential and light-duty commercial applications only. This operator designed so it can easily be mounted in the front, center, or rear of the gate without costly and time-consuming field modifications.

The 9100 is designed so that it can easily be mounted in the front, center or rear of the gate without any costly and time consuming field modifications. In addition, the operator can be pad or post mounted to meet any installation requirements.

Designed to operate vehicular slide gates in residential, commercial and industrial applications.

These operators are designed to operate very heavy vehicular slide gates in limited (Class III) and restricted (Class IV) applications only. These operators should never be used in applications serving the general public.

These systems are designed to provide backup power for your vehicular gate and access control system when primary (AC) power fails. The Model 1000 is designed for a single gate and access control system.>

DKS DoorKing offers a variety of V-Wheels and V-Wheel assemblies used in slide gate applications that utilize an inverted "V" type track. The weight and usage of the gate is critical in determining the size and type of V-Wheel that is right for your gate.

Fire and postal lock boxes, guide rollers, Flange Beaing Hinges, Photo Beam, loop wire, reversing edge, plug in loop detectors, endless idler assembly, tandem wheel assembly, 3 button control, prefabricated ground control.

A complete telephone entry and access control system that is suited for apartment and gated community applications as well as office buildings and industrial sites.

An ideal telephone entry system suited for apartment and gated community applications as well as office buildings and industrial sites that have a separate access control system, or require telephone entry only.

The single-line LCD display features big 1/2-inch characters for easy viewing and your personalized message scrolls across the screen from right to left when the system is not in use.

An ideal telephone entry and access control system that is suited for applications that do not require a directory or in applications where a separate directory exists.

The Access Plus line combines essential features of our most versatile solutions with the ease and accessibility of computer programming and control. After installing the Access Plus Account Manager software on your PC, you can connect to the Access Plus system via a direct connection, LAN or the internet and begin to customize the system immediately.

The Access Plus line combines essential features of our most versatile solutions with the ease and accessibility of computer programming and control. After installing the Access Plus Account Manager software on your PC, you can connect to the Access Plus system via a direct connection, LAN or the internet and begin to customize the system immediately.

This is our top-of-the-line access control and communication system for residential applications. The 1812 Access Plus is PC Programmable and IP Addressable. The 1812 Access Plus controls a main door or gate and can easily be expanded to control up to six additional access points.

Ideal for single-family homes, the DKS wireless adapter reaches up to 1000 feet '- no wires, no trenching. Complete Plug-and-Play functionality. DKS Wireless Kits work with all 1812 models, just connect the router and phone to the wireless adapter, connect to power... and you're ready to go!

Expands the '"No Phone Line'" telephone intercom interface on 1810 and 1812 Access Plus systems from a single phone line up to 11 phone lines. This is not a stand alone system; it must be interfaced with an Access Plus controller, which then provides a '"No Phone Line'" system with all of the programming and control features of the Access Plus systems.

This line combines essential features of our most versatile solutions with the ease and accessibility of computer programming and control. This model is ideally suited for small businesses, mixed use buildings or college residence halls where visitor voice communication and access control is not a requirement.

A unique communication and access control device that provides voice communication and control of a door (or gate) via the residents own telephone without the need of a dedicated central office (C.O.) phone line.

A unique communication and access control device that provides two-way voice communication and control of a main entry door through the resident's own telephone without the need of a dedicated Central Office (C.O.) phone line.

A unique telephone intercom system that allows homeowners to use their telephone as an intercom to speak to a guest at a front door or gate without the necessity to pay for an additional telephone line at their home.

An updated version of the 1812 Classic that features an upgraded processor, new high fidelity digital voice circuit, better volume control, lighted push-button, and additional call out telephone numbers (up to 27).

A complete self-contained telephone entry system that is ideal for small to medium sized apartment buildings, gated communities, condominiums, office buildings, factories and industrial sites.

A small compact telephone entry system that is loaded with features. The distinctive styling of the 1808 makes it ideal for small residential or commercial applications.

An ideal telephone entry system that is loaded with features and is suited for applications that do not require a directory or in applications where a separate directory exists.

An ideal telephone entry system that is loaded with features and is suited for applications that do not require a directory, or in applications where a separate directory exist.

This controller is ideal for small businesses, office buildings, factories, industrial sites, apartment complexes, or for any application that requires access control and reporting capabilities.

System provides complete elevator security that is typically used in high-rise condominium, apartment, or office building applications. The system will restrict which floor a visitor has access to via the elevator after they have been granted access by a building resident.

Wireless tracker expansion boards are used with DKS Models 1833, 1835, 1837 and 1838 to expand these access controllers from two (2) up to 16 entry points. Now you can connect card readers and keypads to the 1830 Series controller without the need to run wiring from each unit to the controller.

This is an information telephone that is suited for applications that require only a single phone number to be called. Visitors needing assistance simply press the CALL button to establish communication with the management office, security office or to any phone number (including long distance numbers) of your choice.

Model 1520 is available as a stand-alone card access system or as a wiegand controller (add your own 26-bit wiegand device). Program the Model 1524 with a hand held programmer or programming cards.

Mounting Posts, Directories/Light Kits, Miscellaneous.

The 1601 operator is designed for single lane (14 ft. max) vehicular traffic control in high traffic commercial and industrial applications. The 1601 operator is designed so that it can be mounted on either the left or right hand side of the roadway.

Designed for traffic lanes up to 20-feet wide in low use commercial and industrial applications.

Designed as a modular system allowing for easy flexibility in different applications and easy installation.

Warning signs and traffic signals are used with traffic control spikes and auto-spikes to inform drivers that a one way lane condition exist and that proceeding in the wrong direction, or before the spikes are fully retracted, will result in severe tire damage. Warning signs and/or traffic signals should always be used in any traffic control application utilizing traffic control spikes.

Traffic control products are ideal for controlling traffic direction and speed through a controlled entry location.

These systems are designed to provide backup power for your vehicular gate and access control system when primary (AC) power fails. The Model 1000 is designed for a single gate and access control system.

DoorKing carries a full line of AWID and HID proximity card readers and cards. These readers output the card data to the access controller (1833, 1835, 1837 or 1838) where the decision to grant or deny access is made. These readers are ideal for both pedestrian and vehicular access control.

Single or two door (gate) stand-alone access control for apartment buildings, gated communities, condominiums, office buildings, factories and industrial sites.

Model 1520 is available as a stand-alone card access system or as a wiegand controller (add your own 26-bit wiegand device). Program the Model 1524 with a hand held programmer or programming cards.

The Model 1838 access controller is ideal for small businesses, office buildings, industrial sites or in any application that requires access control and reporting capabilities.

Key Switches, Lock Boxes, Interior Access Devices.