Office Locations
Buffalo, NY (Northeast) 100 Stradtman St. Buffalo, NY 14206 Toll-Free: 888-851-1947 Fax: 888-279-8778 |
Kee Safety, Ltd. (Canada) 40 N. Rivermede Units 6-7 Concord, Ontario L4K 2H3 Toll Free: 877-505-5003 Fax: 905-669-4347 |
KeeGuard® is the most trusted name in safety railing offering maximum flexibility for your rooftop configuration. Each installation is individually engineered using our modular KeeGuard® components to build a durable and safe Fall Protection System. Adaptable for bi-level or multi-level roofs, varying angles or circular configurations, our KeeGuard® Safety Railing System does not penetrate the roof membrane and always exceeds OSHA compliance.
KeeGuard® Contractor offers an innovative approach to portable and temporary railing systems. The system is free standing, eliminating the need for hardware connections to the rooftop or working surface. KeeGuard® Contractor is an easy to install, modular system and can be configured to meet all OSHA Standards for permanent railings. Solid, safe construction is assembled with basic tools and no penetration of the roof membrane.
The KeeGuard® Topfix system is specifically designed to provide perimeter protection for metal profile and standing seam roofs. Base plates for standing seam roofs are fixed using non-penetrative 2-part clamps. Metal profile roofs are fixed with minimal penetrations using rivets and butyl sealing strip to maintain the roof's integrity. KeeGuard® Topfix allows for fast installation using preassembled uprights and open-cup fittings that easily accommodates the complexities of metal roof protection.
Kee Dome® is a completely free-standing fall protection solution for use around skylights, roof lights and dome lights up to 2m x 2m in size. The modular Kee Dome design allows contractors and work crews to access rooftops for repair and maintenance without the risk of falling through the glazed areas of skylight opening. Kee Dome® is a quick assembly system providing a modular, reliable and permanent solution to mitigate the risk of falling through dangerous rooftop openings.
Fall Protection: Access Points
KeeHatch® perimeter safety railings provide protected access for egress and ingress at roof hatch openings. Designed to fit all standard hatch models, KeeHatch® corrosion resistant safety railings are available in galvanized finish and in Kee Lite® aluminum. KeeHatch® complies with all OSHA safety standards for railings and does not penetrate the roof membrane. Easily installed in less than 30 minutes, KeeHatch® features simple pre-built uprights and drop-in fittings for optimum strength and durability. KeeHatch® is comprised of Kee Klamp® fittings which are the most trusted name in safety railings and components.
Kee Gate® is a complete range of safety gates designed specifically to provide permanent hazard protection for internal or external applications. Kee Gate® provides permanent protection for openings, ladder/stair access points, roof hatches and restricted areas, where regular access for maintenance and inspection is required. Kee Gate® is specifically designed to provide a retro-fit solution for existing fixed structures where opening protection is required.
Fall Protection: Unprotected Edges
Kee Walk with integrated guardrail is a modular, OSHA compliant fall protection solution that stands up to inclement weather. Providing anon-penetrative, dedicated route on the rooftop surface with the added security of a single or dual-sided handrail system, Kee Walk with Guardrail is engineered for all roof types including pitched metal profile and standing seam roofs up to a 35 degrees slope.
KeeGuard® is the most trusted name in safety railing offering maximum flexibility for your rooftop configuration. Each installation is individually engineered using our modular KeeGuard® components to build a durable and safe Fall Protection System. Adaptable for bi-level or multi-level roofs, varying angles or circular configurations, our KeeGuard® Safety Railing System does not penetrate the roof membrane and always exceeds OSHA compliance.
KeeGuard® Contractor offers an innovative approach to portable and temporary railing systems. The system is free standing, eliminating the need for hardware connections to the rooftop or working surface. KeeGuard® Contractor is an easy to install, modular system and can be configured to meet all OSHA Standards for permanent railings. Solid, safe construction is assembled with basic tools and no penetration of the roof membrane.
The KeeGuard® Topfix system is specifically designed to provide perimeter protection for metal profile and standing seam roofs. Base plates for standing seam roofs are fixed using non-penetrative 2-part clamps. Metal profile roofs are fixed with minimal penetrations using rivets and butyl sealing strip to maintain the roof's integrity. KeeGuard® Topfix allows for fast installation using preassembled uprights and open-cup fittings that easily accommodates the complexities of metal roof protection.
KeeGuard® Foldshield provides an ideal solution when safety railings are required but not acceptable to be permanently visible on the roofline. KeeGuard® Foldshield offers all the flexibility of dependable KeeGuard® with the added benefit of folding flat - quickly and simply - when not in use. A galvanized locking pin removed from the fitting allows KeeGuard® Foldshield to pivot and fold flat.
Kee® Mark is a sturdy, freestanding and cost effective portable warning line solution for indoors and out. The simple, modular design incorporates durable galvanized Kee Klamp® components and galvanized uprights that stay in place.Heavy-duty nylon mesh flags are available in safety orange or safety yellow for greater visibility. Stainless steel wire cable is vinyl coated in safety yellow for long-term, outdoor use. Stainless steel shackles connect the cables for easy setup and adjustment. Removable bases are made of solid, heavy duty recycled rubber, engineered to stand its ground, job site after job site. Meets all OSHA standard for warning lines.
Fall Protection: Rooftop Openings
Kee Dome® is a completely free-standing fall protection solution for use around skylights, roof lights and dome lights up to 2m x 2m in size. The modular Kee Dome design allows contractors and work crews to access rooftops for repair and maintenance without the risk of falling through the glazed areas of skylight opening. Kee Dome® is a quick assembly system providing a modular, reliable and permanent solution to mitigate the risk of falling through dangerous rooftop openings.
The unique construction and mounting design of the KeeGuard® Skylight Screen attaches without penetration of the roof or piercing the skylight frame,maintaining the integrity of both surfaces.Skylight Screens are available in galvanized or stainless steel for Curb Style skylight installations, Standing Seam metal roof skylights, and for Rib/Corrugated metal roof skylights. KeeGuard® Skylight Screens exceed OSHA standards (able to withstand a load of at least 200 pounds applied perpendicularly at any one area on the screen).
Fall Protection: Obstacles
When access to an area on the roof is hampered by obstacles or changes in level, our Safe Access Platforms can be customized to meet your specific site requirements. Constructed from Kee Klamp® galvanized or Kee Lite® aluminum railings and components, our Rooftop Crossovers provide a robust and durable access solution to safely transverse rooftop areas without the hazard of climbing over obstructions. Modular in design for ease and speed of installation, SAPs are engineered to comply with current OSHA regulations and standards.
Kee Walk® is a slip-resistant walkway for workers accessing a roof to perform maintenance. The KeeWalk® system provides a safe, level rooftop walking surface with anti-slip features and protects the roof from unnecessary damage as it uniformly distributes the pedestrian load across the surface. Easy to install with pre-assembled standard lengths, this flexible, modular system can be adjusted on-site. For changes in elevation, Kee Walk Steps and a traverse option are also available for virtually any roof configuration from 0 to 35 degrees.
Safety Railing Systems
Invented by Kee Safety, Kee Klamp® modular railing systems use slip-on components to create strong and versatile safety barriers and structures. The flexible Kee Klamp® principle has been developed and refined over 75 years resulting in a versatile range of components suited for any safety requirement.Although steel pipe is an inherently efficient structural component, the difficulty in using steel pipe to form structures arises when joining segments to create a barrier. Threaded pipe must be supplied in specific, set lengths offering zero flexibility for installation. Welding is labor intensive, requires a highly skilled workforce, often special permits and specialized equipment. Kee Klamp® is the most trusted - and longest lasting - safety railing system in the fall prevention industry.
Kee Lite® safety railing is made from high grade Aluminum Silicon Magnesium Alloy (A356-T6) for a lightweight, corrosion resistant, and strong alternative for the fabrication of safety barriers and structures. Due to its superior corrosion resistance, the Kee Lite® system is extremely low maintenance - even in the harshest environments such as wastewater treatment facilities or outdoor applications. At only one-third the weight of our cast iron fittings, and 75% of comparable tensile strength, Kee Lite® is a cost-effective solution to welded railing and offers a smooth aesthetic look and design to handrail and safety rail
Kee Lite® Smooth is our light weight and beautifully engineered aluminum railing system. Aesthetically pleasing and sleek, our matte smooth aluminum railing system is sold pre-assembled so there is limited time and cost required when installing on-site. Kee Lite® Smooth is designed to satisfy the guardrail requirements of the US Water Industry and complies with OSHA standards for safety and reliability. Exceptionally strong, Kee Lite® Smooth Guardrails and Handrails are designed to withstand a 200lb concentrated load applied in any direction and at any point on the top rail.
Kee® Access Railing System is engineered to equip architects, engineers, specifiers, builders, and contractors with the components necessary to easily construct and retrofit commercial and public structures to satisfy the requirements of the Americans with Disabilities Act(ADA), as well as state and local building codes. Easy to assemble and cost-effective, Kee® Access components are galvanized for low long-term maintenance and can be powder coated to any RAL System color.
Everything you need for the Kwik Kit assembly is included in one box. Railing Uprights are pre-assembled to save you even more time and eliminate the guesswork of installation. Kwik Kit railing kits are quick to assemble using a hex key to tighten the large, easy to use set screws. The pre-packaged kit comes with 6-foot post spacing for straight sections, corner sections or extension sections. By using a combination of Straight, Corner, or Extension Kits, most any basic railing requirement can be accomplished.
Safe Access Solutions
Kee® Pallet Gates provide permanent hazard protection when moving goods between different working levels in the manufacturing or warehouse environment. Our Pallet Gate can provide protection for any opening up to 8-feet wide and 9-foot in depth where materials, goods and pallet access is required. Designed to provide a retro-fit solution ensures that the pallet gate works in conjunction with your existing railing rather than an expensive full replacement. The bearings along the pallet gate rails allow for a smooth pivot action securing a balanced and safe open-close movement.
Mobile Work Platforms allow safe access to elevated work areas that are difficult to reach such as machinery, warehouse racking, welding or plastering at height or maintenance of tall vehicles and trains. Our platforms can be designed to suit virtually any requirement where off-the-shelf fabricated options, ladders or towers are not appropriate. Multi-purpose platforms are custom engineered and can be designed up to 3 meters in height. When higher access is required, the platform is constructed with an extra support arm.
Kee Safety mobile platforms are modular in design and utilize either Kee Lite® aluminum or Kee Klamp® galvanized railing and components to provide a secure, robust, corrosion resistant platform. Our exclusive modular design allows the platforms to be delivered and constructed quickly and easily, with minimal on-site disruption.
Static Work Platforms are stationary, customized solutions that provide safe access to perform tasks at height. These corrosion-resistant access solutions are tailored to your specific on-site application or requirements. Available in light-weight aluminum or galvanized steel (Kee Lite® aluminum or Kee Klamp® cast iron), each platform is engineered to exceed OSHA safety standards. Static Platforms are flexible, durable, can be pre-assembled and effectively protect workers from hazards.
Fall Protection: Lifelines and Anchors
KeeLine® Pre-Engineered Horizontal Lifeline systems provide continuous fall protection when working at heights. Our 39-foot system supports up to three users and can be mounted either onto the roof surface or directly onto the building structure. The OSHA compliant KeeLine® fall protection system has been rigorously third-party tested and engineered with increased safety features including enhanced toggle fixings, a slimline corner design, stronger rivets, improved swage and reduced height intermediate uprights. Our unique,cost-effective horizontal life line system is designed for quick and efficient
Weightanka is a mobile, dead weight anchor system for use on roofs up to 5-degree pitch. The quick-to-assemble system features a central pedestal for attachment of a safety harness and lanyard which reduces the distance of travel in a fall arrest event. Weightanka is a mobile safety system and is available for use on many roof surfaces in wet or dry conditions including asphalt, mineral felt, concrete, single-ply membrane and stone chippings (brushed) roofs.
Wireanka is a system of dead weight anchor devices that supports a flexible safety line at each anchor. Intended for use on flat roofs, in temporary situations, or where penetration of the roof surface must be avoided, KeeAnchor® Wireanka is ideal for use on larger roof areas where fall protection needs are greatest. The Wireanka system can be used on many roof surfaces in wet or dry conditions including asphalt, mineral felt, concrete, single-ply membrane and stone chippings (brushed) roofs.
Anchor Solutions for Safe Building Maintenance and Fall Protection
The Kee Post tie-off point acts as a roof anchor for the personal protection of workers carrying out roof-level maintenance operations. Tie-off points are designed for use on roofs where there are no permanent guardrails or other anchor devices.