Loading Dock Equipment, Lift Tables and Positioning Equipment
Pentalift Equipment Corporation was established in 1983. During the last 25 + years Pentalift has grown to become one of North America's largest manufacturers of loading dock equipment, lift tables and positioning equipment.
The simple business philosophy of manufacturing a quality product with a high level of Customer Service continues to be our approach in the marketplace.
Pentalift's continuing success in designing, engineering and manufacturing Lift Tables has gained Pentalift a "world-class" reputation within the Materials Handling Industry. In its relatively short history, Pentalift's workforce has grown to over 100 employees; our modern, fully equipped manufacturing facilities represent a total of more than 120,000 square feet.
Available in 3,000 lb -15,000 lb capacities. All models feature a 12" lowered height, 7' long platforms provide 50" of vertical travel, 8' and longer platforms provide 59" of vertical travel. Platform sizes from 4'wide x 7' long up to 8' wide x 12' long. Bevel toe guards suitable for pit installation, 42" high guard rails and mid rail as standard.
Available in 4,000 lb - 8,000 lb capacities. All models feature a 12" lowered height, 7' long platforms provide 50" of vertical travel, 8' and longer platforms provide 59" of vertical travel. Platform sizes from 4' wide x 7' long up to 8' wide x 12' long. Bevel toe guards suitable for pit installation, 42" high guard rails and mid rail as standard.
Available in 5,000 lb or 6,000 lb capacity. All models feature an 8" lowered height with 59" of vertical travel. Platform sizes from 6' wide x 8' long up to 8' wide x 10' long. Bevel toe guards suitable for pit installation, 42" high guard rails and mid rail as standard. This model of dock lift provides a cost value alternative for limited applications
The Pentalift HDV series vertical storing hydraulic dock leveler is designed and built for use in facilities where cleanliness and temperature conditions are maintained and controlled at a high level. Convenient push button activation and proven hydraulic technology increase the efficiency and safety of the loading/ unloading process. The Pentalift HDV series vertical storing hydraulic dock leveler provides superior performance while allowing easy cleaning of the loading dock area. All Pentalift dock levelers are factory tested before shipping.
The Pentalift LPR35 vehicle restraint safety system is designed to accommodate vehicles fitted with very low rear impact guards. The operating range of the LPR35 is 8 3/4" low and 26" high. The stepped hook design provides dual locking positions and features a 35,000 lb restraining capacity. The rugged structural steel guard protects the vehicle restraint from accidental impact caused by trucks and yard cleaning equipment. A high visibility two way communication system provides communication between the dock attendant and the vehicle operator.
The RVR32 vehicle restraint safety system is a raised, face mounted off the ground design. The front extension bar provides an operating range of 9" low to 25" high, the rotating steel hook design provides a 32,000 lb restraining capacity with a slip clutch to protect the drive components from impact and shock loads. The spring loaded carriage automatically adjusts to trailer movement "float" maintaining contact with the vehicle rear impact guard. A high visibility two way communication system provides communication between the dock attendant and the truck driver.
The MFRAL32 mechanical vehicle restraint provides the combination of a cost effective vehicle restraint with a complete communication system. The MFRAL32 offers a rugged structural design, 32,000 lb restraining capacity and a high visibility two way communication system providing clear communication between the dock attendant and the truck driver. The MFRAL utilizes a NEMA 6 watertight and corrosive duty limit switch to automatically switch the communication lights (inside lights and outside lights) when the restraint is released to the engaged position.
E Series lift tables are available in 500 lb or 1,000 lb capacity, 24" x 48" platform size and both models are available for quick delivery.
With a closed height of only 4.3" one of the industries lowest profile hydraulic lift tables. 1,500 lb and 4,000 lb capacity.
Ruggedly designed and built to suit demanding industrial applications, available in capacities ranging from 3,000 lb - 20,000 lb. 59" of lift is standard.
Design engineered to suit specific lifting applications with load capacities requirements ranging from 25,000 lb - 120,000 lb as standard.
Designed to provide increased lift with reduced frame and platform size in comparison to a conventional lift table design. 500 lb-6,000 lb capacity, up to 90" of lift as standard.
Designed to further provide increased lift with reduced frame and platform size in comparison to a conventional lift table design. 2,500 lb-4,000 lb-6,000 lb capacity, up to 180" of lift as standard.
Used most often as ergonomically correct work positioner. Available in 1,000 lb-1,500 lb and 2,000 lb capacity.
Pneumatic operated lift and tilt functions operate independently permitting various height operators to select the most comfortable work position. 2,000 lb-4,000 lb-6,000 lb capacity.
Electro hydraulic unique lift and tilt design. As the bin is simultaneously lifted and tilted the design does not force the operator back during the tilting operation. 2,500 lb-4,000 lb-6,000 lb capacity.
Drive on design lift and tilt table is often used with pallet trucks or where a recessed pit is not an option. 2,500 lb-4,000 lb-6,000 lb capacity.
Automatically lowers as weight is added, automatically rises as weight is removed during the palletizing/de-palletizing process. Shipped complete with 48" square rotating top. 4,500 lb capacity, 4 Models available.
Tandem designed to increase stability and safely support longer loads during lifting and lowering. Platform lengths of 10' long-14' long. 5,000 lb-8,000 lb-12,000 lb capacity.
Tandem designed to increase stability and safely support even longer loads during lifting and lowering. Platform lengths of 15' long-20' long. Available in 10,000 lb-40,000 lb capacity.
Used to transfer product into a 90 degree orientation. Counter balanced hydraulic valves to prevent potential load runaway during the 90 degree tilting operation. Standard platform sizes up to 60" x 60" x 60". 2,500 lb-4,000 lb-6,000 lb capacity.
20,000 lb capacity designed to safely elevate and support a Fork Lift Truck during maintenance or repair procedures. A safety ratchet system secures the Fork Truck at the desired elevation. Two rear and one front (full width) load support pick up bars are provided as standard.
Pentalift engineering capabilities offer custom designed and engineered lifts (including dock lifts) to suit a wide range of unique applications. Click the link to go to case study / photo gallery of application designed lift and positioning equipment (including dock lifts).
Last Update: 2019-12-02