The COOLWALL® SUPER-COTE™ system is a superior heat reflective water based exterior coating. This highly breathable system has been formulated for superior salt spray, moisture, and mildew resistant properties. COOLWALL® SUPER-COTE™ uses solar reflective, heat and ultraviolet stable properties, yielding longer lasting cooler colors. The high reflectivity can lower energy usage by up to 21.9%. COOL

The COOLWALL® with KYNAR® system is an infrared heat-reflective water based exterior coating that incorporates industry-leading KYNAR Aquatec™ technology. This highly breathable system has been formulated to have superior salt spray, moisture, mold, mildew, and dirt resistant properties. Unlike conventional paints that rely only on mildewcides that leach out over time, COOLWALL® with KYNAR® combines mildewcides with the mildew resistant properties that are inherent in the KYNAR® resin and will last the life of the coating. COOLWALL® with KYNAR® uses infrared heat reflective properties to provide cooler surface temperatures, enhanced durability, and superior fade resistance. The high reflectivity can provide cooling cost energy savings of up to 21.9%*. COOLWALL® with KYNAR® is a low VOC, green building product. Available in satin finish.

COOLWALL® Classic Smooth Primer is a multifunctional low VOC acrylic copolymer pigmented latex system. Rheology modifiers are used to provide nonsag, leveling and film build when freshly applied. This primer is formulated for surfaces where excessive amounts of alkali are present in the substrate.

COOLWALL® Textured Primer is a multifunctional, low VOC acrylic latex system. Rheology modifiers are used to provide non-sag, leveling and film build when freshly applied. This primer is formulated for surfaces where excessive amounts of alkali are present in the substrate, and where a textured appearance is desired.

COOLWALL® Textured Primer HD is a multi-functional low VOC acrylic latex system designed to dry to a hard, durable textured finish. Rheology modifiers are used to provide non-sag, leveling and film build when freshly applied. This primer is formulated for difficult surfaces such as metal, where good adhesion is essential and a textured appearance is desired. This product also assures optimum adhesion of a variety of topcoats

COOLWALL® RE-COTE™ PRIMER is a low VOC 100% acrylic primer. The primer offers excellent adhesion to chalky and previously painted surfaces. Due to its 100% acrylic composition, the primer offers good exterior durability and excellent Alkali and Efflorescence Resistance. COOLWALL® RE-COTE™ PRIMER is low in odor, non-flammable, and is safe and easy to use.

REFLECT-TEC® is a high-performance roof and wall coating system formulated to withstand the harshest climates while offering high solar reflectivity and emissivity so that surfaces stay cooler. This water based Kynar Aquatec® / acrylic coating is breathable, yet offers superior resistance to UV, rain, wind, dirt, mold and mildew. REFLECTTEC® reduces the amount of heat transfer into buildings by reflecting away the sun's infrared energy. This highly reflective coating can reduce peak cooling loads by as much as 25%, even in darker colors. Available in satin and semi-gloss finishes.

TEX-COTE® Tex-Bond™ Primer is a water-based, ready-to-use primer specifically formulated to act as a bonding coat over difficult to adhere surfaces. Tex-Bond Primer utilizes state-of-the-art acrylic polymer technology designed for maximum adhesion to many hard, slick surfaces while assuring optimum adhesion to many topcoats applied over it.

TEX-COTE® Metal-Prime™ is a waterbased, ready-to-use primer specifically formulated to offer good corrosion protection and adhesion to metal surfaces. It utilizes state-of-the art acrylic polymer technology designed for maximum adhesion to metal surfaces and also assures optimum adhesion of a variety of topcoats applied over it.

Heat reflective roof coating standard colors.

TEX-COTE® XL 70® "W" Textured Coating is a water-based high-build, advanced epoxy-acrylate resin system specially formulated to provide a weatherproof coating over cured or uncured concrete masonry surfaces. The ability to go over damp or high alkaline surfaces is a key feature. Available in smooth, sand, fine and coarse textures.

TEX-COTE® XL 70® Textured Coating is a high-build, plasticized, vinyl toluene acrylic resin system specially formulated to provide a weatherproof coating over cured or green concrete masonry surfaces. The ability to go over damp or highly alkaline surfaces is a key feature. Available in smooth, sand, fine, and coarse textures.

TEX-COTE® XL 70® "W" Smooth Airless Coating is a water-based high-build, advanced epoxy-acrylate resin system specially formulated to provide a weatherproof coating over cured or uncured concrete masonry surfaces. The ability to go over damp or high alkaline surfaces is a key feature. Available as a smooth airless applied finish

TEX-COTE® XL 70® Smooth Airless Concrete / Masonry Protective Coating is a high-build, plasticized, vinyl toluene acrylic resin system specially formulated to provide a weatherproof coating over cured or uncured concrete masonry surfaces. Ability to go over damp or highly alkaline surface is a key feature. This coating is recommended for use over properly prepared new pre-cast, tilt-up, or poured concrete, and previously painted substrates such as concrete, dense CMUs, brick or other manufacturer approved surfaces

TEX-COTE® TC600 is a high build, 100% acrylic terpolymer, water based coating with elastomeric properties, featuring rapid drying and adhesion. TC600 is a high performance coating, formulated to protect exterior surfaces from the elements - wind, rain, snow and ultraviolet rays. Protects substrates over a wide temperature range. TC600 is available in a variety of textures and colors. Available in smooth, sand, fine and coarse textures.

TEX-COTE® 400 Textured Coating is a high-build, efflorescence blocking, water based coating with elastomeric properties featuring rapid drying and superior adhesion. This styrene acrylic coating is recommended for use over concrete, cement plaster, block, brick, metal and other manufacturer approved surfaces. TEX-COTE® 400 has shown superior performance over highly alkaline surfaces, stopping efflorescence from migrating through the coating film. The result is a coating with excellent color retention and resistance to fade. Available in smooth, sand, fine and coarse textures.

TEX-COTE® 400 Smooth Airless Coating is a high-build, efflorescence blocking, water base coating with elastomeric properties featuring rapid drying and superior adhesion. This styrene acrylic coating is recommended for use over concrete, cement plaster, block, brick, metal and other manufacturer approved surfaces. TEX-COTE®400 Smooth Airless has shown superior performance over highly alkaline surfaces, stopping efflorescence from migrating through the coating film. The result is a coating with excellent color retention and resistance to fade.

TEX-COTE® 300 is a high-build, latex/acrylic copolymer coating formulated for use on concrete / masonry surfaces. TEX-COTE® 300 features rapid drying, good adhesion, moisture resistance and flexibility. These features help compensate for temperature variations experienced in various climates. This textured coating is available in brush, spray and roller grades. Available in smooth, sand, fine and coarse textures

TEX-COTE® TC-300 SMOOTH AIRLESS is a high-build latex/acrylic copolymer coating formulated for use on concrete / masonry surfaces. TEX-COTE™ TC-300 SMOOTH AIRLESS features rapid drying, good adhesion, moisture resistance and flexibility. These features help compensate for temperature variations experienced in various climates.This textured coating is available in brush, spray and roller grades. Available in smooth airless texture

TEX-GARD® is a high build latex ( water base ) coating which features good adhesion, rapid dry and flexibility. This coating may be used over concrete, cement plaster, block, cement and fiber board, metaland other approved surfaces. Note: masonry must cure a minimum of 28 days prior to coating.

TEX-COTE® STRETCH is a high performance terpolymer elastomeric coating with a 100% acrylic latex base elastomeric resin providing up to 400% longation.

TEX-COTE® STONE-TEX™ SYSTEM is a 100% acrylic terpolymer. TEX-COTE® STONE-TEX™ SYSTEM is recommended over selected TEX-COTE™ exterior textured coating base coats to provide a variety of simulated appearances such as granite, marble, sandstone or stone. Finish coat available in smooth or fine texture.

TEX-COTE® Elastomeric Roof Coating is a high solids latex acrylic coating formulated to impart superior resistance to ponding water conditions. It has excellent adhesion to fresh urethane foam, galvanized metal, aluminum, concrete, cementitious and clay tile. Titanium dioxide and zinc oxide have been compounded into the fillers to insure protection from ultraviolet and infrared sun rays. For mildew protection, a nonmercurial system is included. Dry film permeability permits breathing of the membrane which allows moisture vapor pressure from the substrate to escape through the coating. TEX-COTE® Elastomeric Roof Coating has long-term durability and long lasting flexibility even at low temperatures. 100% water based.

TEX-COTE® CLEAR-GARD™ is an advanced, very low VOC water-based polyurethane coating system that provides superior performance and wear characteristics for previously coated surfaces that are prone to dirt pickup, chemical exposure, staining, or other high-traffic areas such as hand rails and doors. TEX-COTE® CLEAR-GARD™ combines the latest in water based polyurethane chemistry technology to provide a tough medium to high gloss finish surface for added beauty and protection. TEX-COTE® CLEAR-GARD™ is both aesthetically pleasing and functional, as it protects the surface, increasing the life of the underlying coating. TEX-COTE® CLEAR-GARD™ is designed to resist chipping, flaking and peeling, providing years of trouble-free service. TEX-COTE® CLEAR-GARD™ must be applied to previously coated surfaces and other manufacturer approved substrates. It can be applied as one coat, semi-gloss finish or two coat, high gloss finish resulting in a durable, virtually maintenance-free coating that protects as well as it looks. Caution should be used when walking on any coated surface when it gets wet.

CLEAR-SEAL™ is a water-based, 100% acrylic, penetrating sealer designed to produce a clear surface film. It is manufactured from non-yellowing, advanced acrylic resins to form a durable finish that provides long-term water-repellency, increased dirt pick-up resistance and weather protection.. Available in Satin finish only. When a clear semi-gloss finish or enhanced chemical resistance is desired, TEX-COTE's CLEAR-GARD two component urethane product is recommended.

TEX-COTE® COLOR-COTE was developed as a superior coating to be compatible with and have excellent adhesion to the different types of TEX-COTE® Textured Coatings. COLOR-COTE is salt spray, moisture, and mildew resistant. COLOR-COTE can be used for color changes, banding, to revive older TEX-COTE® projects, or by itself with an appropriate priming system over manufacturer approved substrates.

TEX-COTE® D.F. COLOR-COTE is a 100% acrylic latex exterior finish formulated as a high quality finish to be applied over TEX-COTE® Textured Primer. TEX-COTE® D.F. COLOR-COTE is weather, moisture and mildew resistant. This coating is recommended over TEX-COTE® Textured Primers and over approved water base and oil base textured coatings

TEX-COTE® EIFS and Stucco Spray or Trowel Applied Textured Coating is a water-based high-build, advanced acrylic resin system with heat reflective properties. This material is used for the protection and beautification of EIFS, stucco, vertical metal surfaces, and other approved surfaces where a thick concrete appearance is desired. This coating's solar reflective, heat and ultraviolet stable properties, yield longer lasting cooler colors. This coating dries quickly to a hard, durable finish and its texture is ideal for masking surface imperfections. Also available in non-IR heat reflective formula.

EIFS PRIMER is a low VOC 100% acrylic primer. The primer offers excellent adhesion to chalky and previously painted surfaces. Due to its 100% acrylic composition, the primer offers good exterior durability and excellent Alkali and Efflorescence Resistance. EIFS PRIMER is low in odor, non-flammable, and is safe and easy to use.

TEX-COTE® XL 70® C "W" BRIDGE COTE® ( CURE AND COTE) is a waterbased high-build, advanced epoxyacrylate resin system. This material is specially formulated to function both as a concrete curing compound and as a concrete protective coating for use over newly formed/poured concrete surfaces. It is used for the protection and beautification of bridges and above-grade surfaces such as concrete barrier walls, bridge parapets, columns, piers, retaining walls, etc.TEX-COTE® XL 70® C "W" BRIDGE COTE® ( CURE AND COTE ) reduces the application time and cost of rubbing, grouting and sacking of concrete. Specially formulated for bridge systems, factory mixed and ready to use. Available in smooth, sand, fine, and coarse textures.

TEX-COTE® XL 70® BRIDGE COTE® is a one-component, ready to use concrete / masonry protective coating. This material is utilized for the protection and beautification of bridges, above-grade exterior surfaces such as concrete walls, columns, spandrels, median dividers, curbs, retaining walls, etc. TEX-COTE® XL 70® BRIDGE COTE® reduces the cost of rubbing, grouting and sacking of concrete. It helps minimize surface irregularities and will not internally support fungus or mildew. Available in smooth, sand, fine, and coarse textures.

TEX-COTE® 300 BRIDGE COTE® is a high build latex acrylic copolymer coating featuring rapid drying and good adhesion. This coating is recommended for use over concrete, cement plaster and other Manufacturer approved surfaces. Masonry surfaces must cure a minimum of 28 days prior to coating. Available in smooth, sand, fine, and coarse textures

XL 70® C BRIDGE COTE®, is a heavy-bodied, heavyduty, fine textured coating formulated with interlocking pigments and aggregates dispersed in a high polymeric based organic resin system. XL 70™ C BRIDGE COTE® is specifically formulated to function both as a concrete coating and a concrete curing compound for use over concrete substrates that require curing. For the protection and beautification of bridges and above-grade exterior surfaces such as concrete walls, columns, spandrels, median dividers, curbs, retaining walls, etc. XL 70® C BRIDGE COTE® reduces the cost of rubbing, grouting and sacking of concrete. Specifically formulated for bridge systems, factory mixed and ready to use.

TEX-COTE® XL 70® C "W" BRIDGE COTE® ( CURE AND COAT) is a waterbased high-build, advanced epoxyacrylate resin system. This material is specially formulated to function both as a concrete curing compound and as a concrete protective coating for use over newly cast concrete substrates. It is used for the protection and beautification of bridges and above-grade surfaces such as concrete barrier walls, bridge parapets, columns, piers, retaining walls, etc. TEX-COTE® XL 70® C "W" BRIDGE COTE® ( CURE AND COAT ) reduces the application time and cost of rubbing, grouting and sacking of concrete. Specially formulated for bridge systems, factory mixed and ready to use. Available in smooth, sand, fine, and coarse textures.

TEX-COTE® XL 70® "W" BRIDGE COTE® Textured Coating is a waterbased high-build, advanced epoxyacrylate resin system. This material is used for the protection and beautification of bridges, above-grade surfaces such as concrete walls, median dividers, curbs, retaining walls, etc. Available in smooth, sand, fine, and coarse textures.

TEX-COTE® LATEX TRAFFIC PAINT is a fast drying paint to be used for markings on road ways, parking lots and airports and other areas where such markings are required. Traffic beads may be dropped into the coating while still wet to provide a light reflective marking.

RAINSTOPPER® 110, 120, and 140 Silanes are chemical treatments which cause concrete, masonry, limestone or mineral substrates to become repellent to salt and water. Available in two commercial grades, RAINSTOPPER® 120 or 140, for concrete, masonry and limestone; with a third grade, RAINSTOPPER® 110 available for brick, synthetic stone, flagstone and other residential applications.

RAINSTOPPER® 110, 120, and 140 Silanes are chemical treatments which cause concrete, masonry, limestone or mineral substrates to become repellent to salt and water. Available in two commercial grades, RAINSTOPPER® 120 or 140, for concrete, masonry and limestone; with a third grade, RAINSTOPPER® 110 available for brick, synthetic stone, flagstone and other residential applications.

TEX-COTE® RAINSTOPPER® 120W AND RAINSTOPPER® 140W are single component ready-to-use water-based silane clear penetrating sealers which make concrete, masonry, and other mineral substrates repellent to water and dissolved salt

RAINSTOPPER® 110, 120, and 140 Silanes are chemical treatments which cause concrete, masonry, limestone or mineral substrates to become repellent to salt and water. Available in two commercial grades, RAINSTOPPER® 120 or 140, for concrete, masonry and limestone; with a third grade, RAINSTOPPER® 110 available for brick, synthetic stone, flagstone and other residential applications.

TEX-COTE® RAINSTOPPER® 120W AND RAINSTOPPER® 140W are single component ready-to-use water-based silane clear penetrating sealers which make concrete, masonry, and other mineral substrates repellent to water and dissolved salt

RAINSTOPPER® 1750W Clear is a microemulsifiable concentrate based on silanes and alkoxysilanes. When mixed with water, a micro-emulsion is produced. This diluted form will impart water repellency to absorbent mineral surfaces.

RAINSTOPPER® 2000W Clear is a combination of a silicone emulsion with a reactive silane producing a penetrating concrete and masonry sealer and water repellant.

Rainstopper® Ultra Silicone Acrylic Concrete Stain is a water based modified acrylic resin, designed to provide an opaque, long lasting, color toning deep satin finish to concrete and masonry surfaces. Rainstopper® Ultra Silicone Acrylic Concrete Stain provides aesthetic opaque staining, water repellency, chloride ion intrusion, and greater depth of color while allowing moisture and vapor transmission. It is specially formulated to provide resistance to alkali, mildew, calcium chloride, and ultraviolet degradation.

Rainstopper® Silicone Acrylic Concrete Stain (Semi-Transparent/ Opaque ) is a water based modified acrylic resin designed to provide an opaque, satin finish, long lasting, color toning finish to concrete and masonry surfaces. Rainstopper® Silicone Acrylic Concrete Stain provides aesthetic staining, water repellency, chloride ion intrusion, and greater depth of color while allowing moisture and vapor transmission. It is specially formulated to provide resistance to alkali, mildew, calcium chloride, and ultraviolet degradation

TEX-COTE® BRIDGE AND HIGHWAY PAINT & HEAVY STAIN an acrylic polymer stain formulated for use on concrete / masonry surfaces. TEX-COTE® BRIDGE AND HIGHWAY STAIN features rapid drying, good adhesion, moisture resistance and flexibility. These features help compensate for temperature variations experienced in various climates.

Rainstopper® 250 Silicone Acrylic Concrete Stain is a water based modified acrylic resin designed to provide a long lasting, color toning finish to concrete and masonry surfaces. Rainstopper® 250 Silicone Acrylic Concrete Stain provides aesthetic staining, water repellency, chloride ion intrusion, and greater depth of color while allowing moisture and vapor transmission. It is specially formulated to provide resistance to alkali, mildew, calcium chloride, and ultraviolet degradation.

TEX-COTE® BRIDGE AND HIGHWAY STAIN is an acrylic polymer stain formulated for use on concrete / masonry surfaces.

TEX-COTE® BRIDGE AND HIGHWAY STAIN features rapid drying, good adhesion, moisture resistance and flexibility. These features help compensate for temperature variations experienced in various climates.

TEX-COTE® GRAFFITI-GARD® IV is a non-sacrificial, two component, water based high performance clear aliphatic urethane coating that resists graffiti from a variety of materials including spray paints and marking pens. In many cases, freshly applied wet spray paint/ ink will actually crawl back on to itself, frustrating the would-be tagger into stopping and moving on to another target. The slick surface is easy to clean with TEX-COTE® GRAFFITI-GARD IV BIODEGRADABLE CLEANER followed by power washing.

TEX-COTE® GRAFFITI-GARD® IV LOW LUSTER is a non-sacrificial, twocomponent, water-based, high performance clear aliphatic urethane coating that resists graffiti from a variety of materials including spray paints and marking pens. In many cases, freshly applied wet spray paint or ink will actually crawl back on to itself, frustrating the would-be tagger into stopping and moving on to another target. The slick surface is easy to clean with TEX-COTE® GRAFFITI-GARD IV BIODEGRADABLE CLEANER followed by power washing.

TEX-COTE® GRAFFITI-GARD® S is a non-sacrificial, one-component, ready-to-use high performance polysiloxane hybrid coating that resists graffiti from a variety of materials including spray paints and marking pens. In many cases, freshly applied wet spray paint/ ink will actually crawl back on to itself, frustrating the would-be tagger into stopping and moving on to another target. The surface is easy to clean by power-washing or graffiti removing cleansers such as TEX-COTE® GRAFFITI PASTE CLEANER

SACRIFICIAL GRAFFITI GARD® System is a specially formulated and blended water based resin for optimum performance as a protective sacrificial system over new or previously painted substrates.

TY-COTE CLEAR, an aliphatic polyurethane dispersion, acts as a Fill Coat for the substrate and maintains clarity of the substrate. A continuous, pinhole-free film must be created before application of the GRAFFITI GARD® IV or Sacrificial GRAFFITI GARD® System. TY-COTE CLEAR is the natural choice for a sealer for murals, natural stones, architectural block or brick, and other decorative surfaces that need protection from graffiti.

TY-COTE PIGMENTED protects old paint from solvents in the TEX-COTE® GRAFFITI GARD® IV FINISH COAT and can match customer's specified color. ( Must create a continuous pinhole free film. )

TEX-COTE® GRAFFITI-GARD® IV BIODEGRADABLE CLEANER is a proprietary, state-of-the-art, environmentally friendly, GREEN cleaner used to clean graffiti off surfaces that have been protected with TEX-COTE® GRAFFITI GARD® IV GLOSS and LOW LUSTER. GRAFFITI GARD IV BIODEGRADABLE CLEANER is a non-regulated, nearly 0 VOC ( <1 ) cleaner that effectively removes graffiti safely in a short period of time without pungent odors or fumes leaving the GRAFFITI GARD IV film intact to continue protecting against graffiti.

The WASH-GUARD™ COOLWALL® system is a waterborne, smooth finish high-performance coating system specifically designed to withstand the harsh conditions of commercial car-washes. This is a three-coat, high-build, concrete coating system offering the ultimate in protection from water, soaps, acids, alkali, oil, grease, and salt spray. The WASH-GUARD™ coating system uses the patented heat-reflective and fade resistant technology only offered through TEX-COTE®. The recommended sys-tem is comprised of WASH-GUARD™ CLASSIC or TEX-BOND™ PRIMER as the base-coat, WASH-GUARD™ COOLWALL® SUPER-COTE™ heat reflective finish as the intermediate coat, and WASH-GUARD™ CLEAR-GARD as the final coat.

WASH-GUARD™ Classic Primer is a multifunctional low VOC acrylic copolymer pigmented latex system. Rheology modifiers are used to provide nonsag, leveling and film build when freshly applied. This primer is formulated for surfaces where excessive amounts of alkali are present in the substrate.

WASH-GUARD™ Tex-Bond™ Primer is a water-based, ready-to-use prime specifically formulated to act as a bonding coat over difficult to adhere surfaces. WASH-GUARD™ Tex-Bond Primer utilizes state-of-the-art acrylic polymer technology designed for maximum adhesion to many hard, slick surfaces while assuring optimum adhesion of many of topcoats applied over it.

WASH-GUARD™ CLEAR-GARD is an advanced, very low VOC water-based polyurethane coating system that provides superior performance and wear characteristics for surfaces previously coated with compatible TEX-COTE® products. WASH-GUARD™ CLEARGARD combines the latest in water based polyurethane chemistry technology to provide a tough medium-to-high gloss finish surface for added beauty to a coated surface. WASH-GUARD™ CLEAR-GARD is both aesthetically pleasing and functional, as it protects the coated surface, increasing the life of the coating. WASH-GUARD™ CLEARGARD is designed to resist chipping, flaking and peeling, providing years of trouble-free service. WASH-GUARD™ CLEAR-GARD must be applied over compatible TEX-COTE® products. It can be applied as one coat for a semi-gloss finish or two coats for a high gloss finish resulting in a durable, virtually maintenance-free coating that protects as well as it looks. Caution should be used when walking on any coated surface when it gets wet.

The COOL-TEC&® system is a superior heat reflective water based exterior coating designed to bring new life to aged concrete and wood. COOL-TEC® uses solar reflective, heat and ultraviolet stable pigments. Specially formulated to reflect the sun's heat, they can lower exterior surface temperatures by as much as 40 degrees when compared to traditional paints in many colors. Yielding longer lasting cooler colors making a more comfortable walking surface.

COOL-TEX® concrete floor and deck coating is an advanced, very low VOC water-based epoxy coating system that provides superior performance and wear characteristics for garage floors, patios, and walkways. COOL-TEX® base coat is followed with COOL-TEX® CLEARCOTE. COOL-TEX® combines the latest in epoxy chemistry with heat-reflective* technology to provide a tough surface with cooler, longer lasting colors. COOLTEX® is both aesthetically pleasing and functional, as it lowers surface temperatures* while it protects the surface, increasing the life of the deck. COOLTEX® is designed to resist chipping, flaking and peeling, providing years of trouble-free service. COOL-TEX® can be applied to achieve many different appearances. It can be left as a single color, splattered with additional colors for a multi-color finish, or knocked-down for a textured lace finish. The creative possibilities are endless, resulting in a durable, virtually maintenance-free coatings that protects as well as it looks. Caution should be used when walking on any coated surface when it gets wet. Splatter or lace finishes, not the smooth roll-on finish, should be used for all applications where water is present. *Heat-reflectivity only applicable for exterior applications.

COOL-TEX® CLEAR-COTE is an advanced, very low VOC water-based polyurethane coating system that provides superior performance and wear characteristics for COOL-TEX™ coated floors, driveways, patios, and walkways. COOLTEX® CLEAR-COTE combines the latest in water based polyurethane chemistry technology to provide a tough medium to high gloss finish surface for added beauty to floors. COOL-TEX® CLEARCOTE is both aesthetically pleasing and functional, as it protects the floor surface, increasing the life of the floor. COOLTEX® CLEAR-COTE is designed to resist chipping, flaking and peeling, providing years of trouble-free service. COOLTEX® CLEAR-COTE must be applied over COOL-TEX® base coat. It can be applied as one coat for a semi-gloss finish or two coats for a high gloss finish resulting in a durable, virtually maintenance-free coating that protects as well as it looks. Caution should be used when walking on any coated surface when it gets wet. Splatter or lace finishes, not the smooth roll-on finish, should be used for all application where water is present.

TEX-COTE® ERASER-COTE®is an advanced, very low VOC, ultra low odor, two part water-based polyurethane white or clear coating that creates a high performance seamless dry-erase writing surface for use with industry standard dry-erase markers and erasers. ERASER-COTE® can turn almost any smooth surface, even entire walls into a long-lasting dry-erase writing surface. It may also be used to restore old dry-erase boards and chalk boards. For interior or exterior.

TEX-COTE® ERASER-COTE®is an advanced, very low VOC, ultra low odor, two part water-based polyurethane white or clear coating that creates a high performance seamless dry-erase writing surface for use with industry standard dry-erase markers and erasers. ERASER-COTE® can turn almost any smooth surface, even entire walls into a long-lasting dry-erase writing surface. It may also be used to restore old dry-erase boards and chalk boards. For interior or exterior.

COLOR-TEX® is a pigmented, textured interior/exterior seamless wall finish. For use on a wide range of wall surfaces, such as drywall, concrete, concrete block, brick, stucco, wood, glass, plaster, metal, and plastic. Durable, flexible, low odor, with rapid drying properties. System has long term adhesion qualities, excellent breathability, and is fungus and mildew resistant. Environmentally safe, fully compliant with all existing Volatile Organic Contents ( V.O.C.) regulations. Designed for spray application, a variety of textures are possible. These include various grades of TEX-TURA®; lace and sandstone lace; venetian lace; fresco lace; bark; cypress; and other customized patterns

TEX-TURA® is a pigmented, textured seamless wall finish. It is used for new or renovation projects to provide a multicolor and texture coordinated wall finish. The system is designed for quick installation and is typically spray applied using standard equipment.

COLOR-TEX® Clear-Cote™is a clear acrylic sealer with added protection against mildew, algae and fungal growth. COLOR-TEX® Clear-Cote™ (satin finish) provides an excellent top coat for areas of high dirt, or added protection from yellowing, scuffing or wear of the coating system

COOLWALL® Classic Smooth Primer is a multifunctional low VOC acrylic copolymer pigmented latex system. Rheology modifiers are used to provide nonsag, leveling and film build when freshly applied. This primer is formulated for surfaces where excessive amounts of alkali are present in the substrate.

COOLWALL® Textured Primer is a multifunctional, low VOC acrylic latex system. Rheology modifiers are used to provide non-sag, leveling and film build when freshly applied. This primer is formulated for surfaces where excessive amounts of alkali are present in the substrate, and where a textured appearance is desired.

TEX-COTE® Metal-Prime™ is a waterbased, ready-to-use primer specifically formulated to offer good corrosion protection and adhesion to metal surfaces. It utilizes state-of-the art acrylic polymer technology designed for maximum adhesion to metal surfaces and also assures optimum adhesion of a variety of topcoats applied over it.

COOLWALL® RE-COTE™ PRIMER is a low VOC 100% acrylic primer. The primer offers excellent adhesion to chalky and previously painted surfaces. Due to its 100% acrylic composition, the primer offers good exterior durability and excellent Alkali and Efflorescence Resistance. COOLWALL® RE-COTE™ PRIMER is low in odor, non flammable, and is safe and easy to use.

XL-70 "W" Primer complies with California Air Resource Board ( C.A.R.B. ) Rule 1113 and also United States EPA regulations. This unique primer is a water-based, epoxy acrylic hybrid for use under water based topcoats. XL-70 "W". Primer is low in odor, non-flammable, and is safe and easy to use.

XL 70® Primer is ready to use where damp, uncured cementitious surfaces are common, or where excessive amounts of alkali are present in the substrate. XL 70™ Primer provides the proper surface for TCA Coatings such as TC600, TC100, TC300, XL 70® Textured Coating or TEX-COTE® Stretch. This product line is a solvent based vinyl toluene acrylic ( VTAC ) material.

PRIMER 27 "W" complies with California Air Resource Board ( C.A.R.B. ) Rule 1113 and also United States EPA regulations. This unique primer is an advanced water based acrylic system for use under water based interior or exterior topcoats. PRIMER 27 "W" is low in odor, non-flammable, and is safe and easy to use.

TEX-COTE® TEX-BOND™ Primer is a water-based, ready-to-use primer specifically formulated to act as a bonding coat over difficult to adhere surfaces. TEX-BOND™ Primer utilizes state-of-the-art acrylic polymer technology designed for maximum adhesion to many hard, slick surfaces while assuring optimum adhesion to many topcoats applied over it.

TEX-COTE® CONCRETE & MASONRY PRIMER is a low VOC 100% acrylic primer. The primer offers excellent adhesion to concrete & masonry surfaces. Due to its 100% acrylic composition, the primer offers good exterior durability and excellent Alkali and Efflorescence Resistance. TEX-COTE® CONCRETE & MASONRY PRIMER is low in odor, nonflammable, and is safe and easy to use.

TEX-TITE Caulk Primer is a low V.O.C. Acrylic copolymer pigmented latex system used for improving adhesion over urethane and other caulks. The primer is used prior to application of other TEX-COTE® products, improving the adhesion of the topcoat caulk joints.

TEX-COTE® Block Filler is a pigmented, styreneacrylic base resin system formulated to provide filling and dampproofing properties to masonry block systems. Meets most parameters of Federal Specification 1098D

FLEX-PATCH® is a water based, ready to use patching compound available in both knife (texture) and butter (smooth) grades. It is applied to a maximum of 1/32".

TEX-COTE® SKIM COTE is a trowel grade waterbased acrylic skim coat, used for filling block lines as well as a skim coat or block filler for a masonry wall. The product can be troweled in place and coated with TEX-COTE® water based products (such as TEX-STOP®, Classic or Textured Primer) within 2 - 3 days. XL 70™ can be applied after the SKIM COTE has cured, typically 10 to 14 days.

The 1030 FC is our highest production sprayer for applying smooth and aggregate textures, elastomeric and acrylic materials on large concrete buildings.

The 10:1 President is a time-tested, air-operated texture sprayer that pumps directly from your material drum.

The all new TexSpray HTX 2030 is Graco's most powerful and versatile texture sprayer to date. Designed for today's demanding exterior aggregate and smooth coatings, the HTX 2030 offers extreme durability and simple operation. Capable of applying exterior smooth and aggregate textures, elastomerics, and acrylic materials, it can also spray drywall mud in an orange peel, splatter or knockdown finish. Combine this with the available MaxLife' Endurance' High Pressure Pump and you can spray a wide variety of interior and exterior smooth materials including primers and paints.

The TexSpray 5900 HD Convertible is our most versatile airless/texture sprayer to date. This gas/electric sprayer gives the contractor indoor/outdoor flexibility to get the job done. Its job-proven capabilities enable it to spray skim coat in a Level 5 finish, and drywall mud in an orange peel, splatter or knockdown finish. It can even apply the whole range of primers and paints.