coatings and sealants
CONTACT INFO
3735 Green Rd.
Beachwood, OH 44122
Toll Free: 800-321-7906
Phone: 216-292-5000
Fax: 216-766-5543
220 Wicksteed Ave.
Toronto, ON
Canada
M4H1G7
(800) 363-3213
1451 Jacobson Ave.
Ashland, OH 44805
(800)321-6357
Toronto, ON
Canada
M4H1G7
(800) 363-3213
1451 Jacobson Ave.
Ashland, OH 44805
(800)321-6357
CONTENT
SPECIFICATIONS
GREEN DATAWARRANTY
COMPANY OVERVIEW
Tremco Commercial Sealants & Waterproofing (CS&W) is North America's foremost supplier of sealant, weatherproofing, and passive fire control solutions for commercial and residential construction and industrial applications. For generations, Tremco CS&W has successfully provided products and services to architects, engineers, home builders, contractors and building owners worldwide. When it comes to protecting and weatherproofing the entire building envelope, Tremco CS&W is uniquely positioned to provide single-source products, services and solutions.
ALL PRODUCTS
{{this.show}} {{this.hide}} Air Barrier Systems
Air Barrier Systems - ExoAir®
Tremco's ExoAir® Air Barrier Systems offer comprehensive vapor-retarding and vapor-permeable systems including sealants, mastics and transition assemblies, backed by a performance warranty ensuring protection against air and moisture infiltration.
Vapor-Permeable Air Barrier
ExoAir Vapor-Permeable Air Barrier Systems are designed to seal walls from air infiltration and exfiltration, while allowing vapor molecules to pass through so they do not get trapped within the wall. Trapped moisture vapor could cause condensation to occur within the wall cavity which can lead to structural deterioration and shortened structure life.
Fluid-Applied, Asphaltic Air & Vapor Permeable Membrane - ExoAir® 220
ExoAir® 220 Fluid-Applied Permeable Air Barrier Membrane is a monolithic, elastomeric membrane designed to be rolled or sprayed onto exterior above-grade wall assemblies to mitigate air infiltration/exfiltration and water penetration while remaining permeable to the passage of water vapor.
Fluid-Applied, Synthetic Air & Vapor Permeable Membrane - ExoAir® 230
ExoAir® 230 Fluid-Applied Synthetic Permeable Air Barrier Membrane is a monolithic, elastomeric membrane designed to be rolled or sprayed onto exterior above-grade wall assemblies to mitigate air infiltration/exfiltration and water penetration while remaining permeable to the passage of water vapor. It may also be used as a liquid-applied flashing, enabling the contractor to address both the membrane and flashing needs with a single material.
{{this.show}} {{this.hide}} Air & Vapor Barriers
Fluid-Applied, Asphaltic Air & Vapor Barrier Membrane - ExoAir® 120
ExoAir® 120 Fluid-Applied Air and Vapor Barrier Membrane is a monolithic, elastomeric membrane designed to seal exterior above-grade wall assemblies and mitigate air infiltration/exfiltration, vapor transmission and water penetration. It is available in two grades: ExoAir 120 SP (spray grade) and ExoAir 120 R (roller grade).
Fluid-Applied, Synthetic Air and Vapor Retarder Membrane - ExoAir® 130
ExoAir® 130 Fluid-Applied Synthetic Air and Vapor Barrier Membrane is a monolithic, elastomeric membrane designed to seal exterior above-grade wall assemblies and mitigate air infiltration/exfiltration, vapor transmission and water penetration. It is available in a single grade that can be roller or spray applied using the appropriate spraying equipment.
Self-Adhered Air & Vapor Barrier Membrane - ExoAir® 110
ExoAir® 110 is a composite 40-mil sheet designed for use as the membrane or as a component of an air barrier system. ExoAir 110 is 36 mils of self-adhering SBS rubberized asphalt laminated to 4 mils of white, cross-laminated, high-density polyethylene film and a siliconized release liner.
Self-Adhered Air and Vapor Barrier Membrane - ExoAir® 110AT
ExoAir® 110AT is a 22-mil composite impermeable membrane that is comprised of 16 mils of butyl and 6 mils of HDPP facer. It can be used as the membrane or as a detailing accessory of an air barrier system. ExoAir 110AT when installed properly as a system will provide the requirements of an air barrier: air impermeable, continuity, structural integrity and durability.
Self-Adhered Air & Vapor Barrier Membranes - ExoAir® 111
ExoAir® 111 is a composite 24-mil sheet designed for use as the membrane or as a component of an air barrier system. ExoAir 111 is 20 mils of high-performance butyl laminated to 4 mils of metalized highdensity polypropylene film and a siliconized release liner.
{{this.show}} {{this.hide}} Expanding Foam
Flexible, Low-Expansion Polyurethane Foam - ExoAir®
ExoAir® Flex is a single-component, high performance, gun-grade polyurethane flexible foam that performs as a thermal barrier. With an industry leading movement range of +/-15% (Movement Accommodation Factor of 30%), ExoAir Flex, part of the T3 Building Solutions System, protects against thermal expansion and contraction. ExoAir Flex is CFC-free and can be applied over a wide temperature range, making it a reliable, fourseason solution.
Low-Expanding Polyurethane Foam - ExoAir® LEF
ExoAir® LEF is a single-component, CFC-free, all-season, high performance, gun-grade polyurethane foam that performs as a thermal barrier. ExoAir LEF is part of the Tremco T3 building envelope transition toolbox.
{{this.show}} {{this.hide}} Transition Assemblies
Transition Assemblies
Transition Assemblies assure that tie-ins or transitions from air barriers to window or curtain wall systems will not be a source of problems from air and moisture infiltration into a structure. Tremco provides PROVEN solutions from a single source to simplify the installation of transitions from window systems to wall assemblies.
Proglaze ETA Assemblies
Patented engineered transition assemblies for connections from the air barrier system to the window system.
ExoAir T3 Solutions
Tremco's T3 Building Enclosure Solutions seal out weather around windows and doors while sealing in comfort and energy savings. The T3 approach employs three layers that work in unison: an outer layer that provides weather protection while allowing for vapor diffusion; a middle layer that provides a thermal barrier; and an airtight, vapor-resistant inner seal.
Proglaze ETA Assemblies
Patented engineered transition assemblies for connections from the air barrier system to the window system.
ExoAir T3 Solutions
Tremco's T3 Building Enclosure Solutions seal out weather around windows and doors while sealing in comfort and energy savings. The T3 approach employs three layers that work in unison: an outer layer that provides weather protection while allowing for vapor diffusion; a middle layer that provides a thermal barrier; and an airtight, vapor-resistant inner seal.
Engineered Transition Assembly - Proglaze® ETA
Proglaze® ETA Connections are pre-engineered silicone materials used as a transition assembly between the window or wall system and adjacent air and vapor barrier materials. The assembly is comprised of a flat single or double ribbed silicone extrusion of varying widths, which is adhered to the building faade with Spectrem 1 Silicone Sealant to ensure a durable connection and positive seal. The opposite edge of the ribbed silicone extrusion will span unsupported onto the wall and/or window system, which is adhered with Spectrem 1 Silicone Sealant. This connection will provide a long-term durable flexible connection between the two components.
3-D Molded Corners - Proglaze® ETA
Proglaze® ETA 3-D Molded Corner Connections are engineered from 40 Durometer Dense Translucent Silicone used for making connections to our ExoAir Air Barrier Membrane systems with Spectrem 1 Silicone Sealant. The 3-D molded corners have been designed in such a way so that they may be used to overlap one another or used in conjunction with other Proglaze ETA components to accommodate complex transitions.
Pre-Engineered Connections - Proglaze® ETA
Proglaze® ETA Connections are pre-engineered silicone materials used as a transition assembly between the window or wall system and adjacent air and vapor barrier materials. The assembly is comprised of a flat single or double ribbed silicone extrusion of varying widths, which are adhered to the building facade with Spectrem 1 Silicone Sealant to ensure a durable connection and positive seal. The opposite end of the ribbed silicone extrusion will span unsupported onto the wall and/ or window system, which is adhered with Spectrem 1 Silicone Sealant. This connection will provide a long-term durable flexible connection between the two components.
Multi-Purpose Transition Membrane - ExoAir® Duo
ExoAir® Duo Membrane is comprised of a tear-resistant fabric embedded into a polyethylene copolymer. The unique design provides a reactive membrane that changes its water vapor permeability depending on temperature and relative humidity. This allows the product to perform as an intelligent seal for airtight and weathertight internal and/or external joints.
Impregnated Pre-Compressed Tape for Sealing Joints - ExoAir® Eco
ExoAir® Eco is a UV-stable, pre-compressed, self-expanding, flexible joint seal. It is a polyurethane foam that is impregnated with a modified acrylic resin and treated with a pressure-sensitive adhesive on one side for ease of installation. ExoAir Eco self-expands to fill the joint creating an elastic, vapor permeable, weather tight seal.
Flexible, Low-Expansion Polyurethane Foam - ExoAir® Flex
ExoAir® Flex is a single-component, high performance, gun-grade polyurethane flexible foam that performs as a thermal barrier. With an industry leading movement range of +/-15% (Movement Accommodation Factor of 30%), ExoAir Flex, part of the T3 Building Solutions System, protects against thermal expansion and contraction. ExoAir Flex is CFC-free and can be applied over a wide temperature range, making it a reliable, fourseason solution.
Low-Expanding Polyurethane Foam - ExoAirŽ LEF
ExoAir LEF is a single-component, CFC-free, all-season, high performance, gun-grade polyurethane foam that performs as a thermal barrier. ExoAir LEF is part of the Tremco T3 building envelope transition toolbox.
Impregnated, Pre-Compressed Tape for Sealing Joints - ExoAir® Trio
ExoAir Trio is a UV-stable, pre-compressed, self-expanding, flexible joint seal. It is a polyurethane foam that is impregnated with a modified acrylic resin and treated with a pressure-sensitive adhesive on one side for ease of installation. ExoAir Trio also includes an additional layer acting as a vapor retarder. When installed, ExoAir Trio expands into the joint to create a seal that is airtight, thermally efficient and vapor permeable.
{{this.show}} {{this.hide}} Commercial Glazing Systems
Commercial Glazing Systems
With over 80 years of experience, Tremco's Glazing Solutions Group takes the guesswork out of glazing system design and assures the adhesion, weatherability and durability of the system. Our dedicated Design Engineering team will create a custom solution for your project and can draw from a library of over 20,000 gasket profiles. Our Ashland Facility is one of the top 5 specialty rubber and gasket extruders, producing over 250 million feet a year.
Insulating Glass Sealant, Two-Part Silicone - Tremco JS 562
Tremco JS 562 Silicone Insulating Glass Sealant is a two-part, high modulus, silicone sealant.
Single-Component, Moisture-Cure, Acetoxy Silicone Sealant for Glazing - Proglaze®
Proglaze® is a single-component, moisture-cure, acetoxy, silicone sealant for a variety of in-field and in-plant glazing applications.
Multi-Component, Neutral-Cure, Silicone Sealant for Structural Glazing - Proglaze® II
Proglaze II is a multi-component, high-modulus silicone sealant consisting of a white base and a black curing agent that, when mixed through a pump, cures to a tough, flexible rubber.
Single-Component, Neutral-Cure, Silicone Sealant for Structural Glazing - Proglaze® SSG
Proglaze® SSG is a single-component, neutral-cure, high-modulus silicone sealant ideal for a wide variety of glazing applications. Proglaze SSG offers fast through-cure and exceptional tensile strength.
Single-Component, Moisture-Cure Silicone Sealant - Spectrem® 1
Spectrem® 1 is a high-performance, single-component, moisture-cure, ultralow modulus silicone sealant.
Single-Component, Neutral-Cure Silicone Sealant for 2-Sided Structural Glazing - Spectrem® 2
Spectrem® 2 is a high-performance, single-component, neutral-cure, medium-modulus silicone sealant.
Single-Component, Neutral-Cure, Non-Staining Silicone Sealant - Spectrem® 3
Spectrem® 3 is a single-component, neutral-cure, low-modulus, construction grade silicone sealant that is non-staining and has low polar attraction to dirt.
Multi-Component, Neutral-Cure, Non-Staining Silicone Sealant - Spectrem® 4-TS
Spectrem® 4-TS is a multi-component, neutral-cure, low-modulus silicone sealant that is non-staining and has low polar attraction to dirt. Spectrem 4- TS offers color flexibility with the opportunity to tint the material on site.
Single-Component, Acetoxy Silicone Sealant - Tremsil® 200
Tremsil® 200 is a single-component, acetoxy silicone sealant. Tremsil 200 cures to a flexible rubber when exposed to moisture present in the air.
Single-Component, Neutral-Cure Silicone Sealant for Glazing - Tremsil® 600
Tremsil® 600 is a single-component, neutral-cure, fast-skinning, medium modulus silicone sealant. The sealant cures to a flexible rubber when exposed to moisture present in the air.
High-Performance Glazing Tape - POLYshim® II
POLYshim® II Tape is a 100% solids, highly adhesive and elastic, cross-linked butyl preformed tape with a continuous integral EPDM shim.
Structural Glazing Tapes - Tremco SGT-900 Series
Tremco SGT-900 Series Structural Glazing Tapes are open-cell, high density polyurethane foam tapes with a micro-cellular structure.
Extruded Flow-Resistant Tape - Tremco ET 675
Tremco ET 675 is a 100% solid, cross-linked preformed (extruded) butyl tape. Tremco ET675 is non-oxidizing, non-film forming, and provides exceptional flow resistance when subjected to vibration
Butyl Sealant Tape - Tremco® 440
Tremco® 440 Tape is a 100% solid Polyisobutylene cross-linked butyl, preformed sealant.
Precision-Extruded Glazing Seal - VISIONstrip®
VISIONstrip® is a precision-extruded glazing seal consisting of an EPDM rubber extrusion positioned at the sightline with a 100% solids, highly adhesive, cross-linked performed butyl sealant bonded below the rubber extrusion. A single component profile achieving a positive-wet seal between the metal and glass surfaces while providing a clean gasket appearance at the sightline.
Continuous Spacer Shims - Arrow-Shim Gaskets
Arrow-Shim Extrusions are used recessed between sash and glass or plastic sheet in conjunction with a sealant cap bead. Arrow-Shim Extrusions are designed to control and provide proper face clearance cap bead spacing while providing a uniform cushion along the entire perimeter of the glass. Easier to install than round shims.
Cellular Rubber Extrusions
Tremco Cellular Rubber Extrusions are fabricated into gaskets and accessories for use in sealing and glazing applications in building construction. Rubber Extrusions are generally custom manufactured but many standard designs are available. Many profiles are available depending upon existing metal requirements.
EPDM Dense Rubber Extrusions
Tremco EPDM Dense Rubber Extrusions are extruded and fabricated into gaskets and accessories (such as setting blocks, spacers and shims) for use in sealing and glazing applications in building construction.
Flame-Retardant Dense Rubber Extrusions - Neoprene
Tremco Flame Retardant Dense Neoprene Rubber Extrusions are extruded and fabricated into gaskets and accessories (such as setting blocks, spacers and shims) for use in sealing and glazing applications in building construction.
Rubber Extrusions - Peroxide EPDM Extrusions
Tremco Peroxide EPDM Rubber Extrusions are extruded and fabricated into gaskets and accessories (such as wedges, pre-set spacers, weatherstripping and shims) for use in glazing applications and other building joint applications.
Poly-Wej Gaskets
Tremco Poly-Wej Gaskets are designed for use in compression glazing systems. They are available as a standard in EPDM. When used in combination with Tremco POLYshim' II Tape and gunnable sealants, the Poly-Wej Glazing System is formed. This system is proven and "clean and easy" to install, affording many years of excellent performance.
Thermoplastic Rubber Extrusions - SCR-820
SCR-820 Thermoplastic Rubber Extrusions are fabricated into gaskets and accessories (such as setting blocks, spacers and shims) for use in sealing and glazing applications in building construction. Custom color matching is available.
Silicone Compatible Rubber Extrusions - SCR-880
SCR-880 Silicone Compatible Rubber Extrusions are fabricated into gaskets and accessories (such as setting blocks, spacers and shims) for use in sealing and glazing applications in building construction. Custom color matching is available.
Silicone Compatible Rubber Extrusions - SCR-900
SCR-900 Silicone Compatible Rubber Extrusions are fabricated into gaskets and accessories (such as wedges, pre-set spacers, weatherstripping, setting blocks and shims) for use in glazing applications and other building joint applications.
Silicone Extruded Sheet - Dense Rubber Extrusions
Tremco Silicone Dense Rubber Extrusions are extruded and fabricated into gaskets and accessories (such as setting blocks, spacers and shims) for use in sealing and glazing applications in building construction. Custom color matching is available.
Silicone Extrusions - Dense Rubber Extrusions
Tremco Silicone Dense Rubber Extrusions are extruded and fabricated into gaskets and accessories (such as setting blocks, spacers and shims) for use in sealing and glazing applications in building construction. Custom color matching is available.
Restoration Overlay - Spectrem®
Spectrem® Restoration Overlays are dense rubber extrusions used for restoration applications. The patented, innovative design solution provides long-lasting performance and aesthetics. These overlays are typically bonded with Spectrem 1 Silicone Sealant to provide a watertight seal.
Extruded Silicone Bridge - Spectrem® Simple Seal
Spectrem® Simple Seal is an ultra-low modulus, preformed silicone extrusion specifically designed to have high elongation properties. Simple Seal is typically bonded with Spectrem 1 Silicone Sealant to a wide range of substrates to provide a watertight seal.
{{this.show}} {{this.hide}} Vegetated Roofs
Green Roofs - VR Lite
VR Lite is a thin, lightweight, extensive built-up system that is ideal for the growth of sedum plantings that require 2" to 4" growing media depth.
Green Roofs - VR Mod
VR Mod is an "instant vegetated roof". This system is a pre-vegetated, hybrid, modular system in which the plants are grown in 4" growing media depth prior to roof installation.
Green Roofs - VR Max
VR Max is a high-performance built-up system for intensive and semi-intensive vegetated roofs. Unrivalled in storm water management capacity and cooling benefits, VR Max systems will support virtually any rooftop landscape that requires 4" + of growth media depth.
Green Roofs - VR HydraMax
VR HydraMax can be customized for either extensive or intensive configurations. Start with a complementary waterproofing assembly, select your desired drainage, filtration, and retention layers, and then pair with your desired vegetation option with corresponding growth media type.
Green Roofs - VR UltraLite
VR UltraLite is an extensive, extra lightweight built-up system and the lightest of Tremco's VR pre-vegetated green roof systems. VR UltraLite will provide the lightest, easiest-to-install, and fastest green roof available on the market. The system boasts the same low maintenance requirements as Tremco's VR Lite extensive green roof systems, however with no loose growing media, good water retention and stormwater management capabilities. With instant greening effects, this system is a strong contender for retrofit projects with weight and cost limitations.
Green Roofs - VR UltraLite Plus
VR UltraLite Plus is an extensive, extra lightweight built-up vegetated roof assembly. VR UltraLite Plus is an upgraded option to our lightest pre-vegetated green roof system available. For projects where both structural limitations and water retention capacity are competing concerns, this system will shine as a happy medium. VR Plus provides one of the lightest, easiest-to-install, and fastest green roof systems available on the market.
{{this.show}} {{this.hide}} Residential Window and Door
Residential Window and Door
Over the years, windows have become larger, higher-performing glass is available, and performance standards have increased, placing a greater demand on the glazing materials used to seal and support the glass.
Tremco's knowledgeable and highly experienced sales staff, technical service representatives, and R&D groups have been devoted to providing the best residential sealant technology and innovation.
We recently introduced EnerEDGE®, a pre-desiccated, ready-to-apply, cellular silicone warm-edge spacer that is suitable for a wide range of insulating glass construction in fenestration applications
Tremco's knowledgeable and highly experienced sales staff, technical service representatives, and R&D groups have been devoted to providing the best residential sealant technology and innovation.
We recently introduced EnerEDGE®, a pre-desiccated, ready-to-apply, cellular silicone warm-edge spacer that is suitable for a wide range of insulating glass construction in fenestration applications
{{this.show}} {{this.hide}} Traffic Coatings
Traffic Coatings
Tremco's high-performance Vulkem® line of liquid applied membranes offer superior, single source, long-term protection against some of the most extreme conditions with chemistries created to address speed of application, durability and of course budget. Tremco offers a broad selection of coatings for vehicular, pedestrian and specialty applications.
{{this.show}} {{this.hide}} Architectural Wall Coatings
Architectural Wall Coatings
Our Architectural Wall Coatings are designed to meet performance, application or budget requirements. Protective wall coatings can restore aesthetic appeal and extend the life of a building's exterior. They are generally the first line of defense in correcting problems and preventing moisture infiltration. The faade surface being restored and its condition, as well as the daily conditions it will be exposed to, will determine the wall coating recommended for use with the appropriate ability to accommodate movement or bridge cracks, dirt resistance, ultraviolet stability and resistance to hydrolysis.
{{this.show}} {{this.hide}} Firestopping
Firestopping
Containing a fire to an area of origin once it starts allows occupants to find safe passages to emergency exits and first responders to assist with evacuation before working to extinguish the fire. Buildings are constructed with fire-rated walls and floors to allow these compartments to be created, but joints between assemblies or penetrations in assemblies can negate the protection they were designed to create. Tremco's firestopping products are designed and engineered as integral components to critical high-performance UL rated systems.
{{this.show}} {{this.hide}} Primers
Primers
Tremco Primers promote the adhesion of Silicone and Polyurethane Sealants, Membranes and Coatings to porous and non-porous substrates.
{{this.show}} {{this.hide}} Sealants
Sealants
Tremco's broad offering of sealants include high-performance multi-component and one-part urethane, hybrid urethane and silicone sealants, and application-specific materials to solve construction
{{this.show}} {{this.hide}} Waterproofing Systems
Waterproofing Systems
Tremco's waterproofing systems offer a comprehensive range of products and systems that are designed to meet job-specific needs and requirements of the architects, owners, engineers and contractors. We offer a series of cold, hot and bentonite sheet waterproofing membranes for vertical, horizontal and lagging applications.
{{this.show}} {{this.hide}} Sustainability
Sustainability
At Tremco Commercial Sealants & Waterproofing, we understand the critical impact that Sustainable Design and Green Building can have on our world. We also realize that for us to have an impact as a supplier to the construction industry, we must make it part of our company's vision to provide sustainable building design solutions which achieve social and environmental objectives while providing economic balance. It is, therefore, our mission to develop sustainable solutions that create value for our customers through product/system performance, increased application efficiencies and life-cycle operational savings.
Sustainability is at the very core of our business. In fact, to demonstrate our commitment to sustainability, we transformed our 40-year-old headquarters building into a showcase for sustainability incorporating our innovative technologies, best practices and integrated design approach to the renovation. In February, 2012, the U.S. Green Building Council certified the Tremco headquarters as LEED Gold.
Sustainability is at the very core of our business. In fact, to demonstrate our commitment to sustainability, we transformed our 40-year-old headquarters building into a showcase for sustainability incorporating our innovative technologies, best practices and integrated design approach to the renovation. In February, 2012, the U.S. Green Building Council certified the Tremco headquarters as LEED Gold.
Last Update: 2018-03-22