Next-Generation TPO Engineered For Extreme Applications. EverGuard Extreme® TPO 50-mil Membrane is the best performing TPO in accelerated aging.  After accelerated heat aging at 275°F (135°C) for 196 days, EverGuard Extreme® TPO showed no cracking - while every one of the competitors' samples failed! Guarantees are available up to 25 years and it's easier to install due to the large welding window. High 3-year aged reflectance of 0.72 can help reduce energy costs and it comes with the most complete line of accessories.

Next-Generation TPO Engineered For Extreme Applications. EverGuard Extreme® TPO 60-mil Membrane is the best performing TPO in accelerated aging.

After accelerated heat aging at 275°F (135°C) for 196 days, EverGuard Extreme® TPO showed no cracking - while every one of the competitors' samples failed! Guarantees are available up to 30 years and it's easier to install due to the large welding window. High 3-year aged reflectance of 0.72 can help reduce energy costs and it comes with the most complete line of accessories. 

Next-Generation TPO Engineered For Extreme Applications. EverGuard Extreme TPO is the best performing TPO in heat-aging and UV tests – the best predictors of TPO performance.

After accelerated heat aging at 275°F (135°C) for 196 days, EverGuard Extreme® 50-mil and 60-mil TPO showed no cracking - while every one of the competitors' samples had failed! Guarantees are available up to 30 years and it's easier to install due to the large welding window. High 3-year aged reflectance of 0.72 can help reduce energy costs and it comes with the most complete line of accessories. 

Next-Generation TPO Engineered For Extreme Applications. EverGuard Extreme® TPO is the best performing TPO in heat-aging and UV tests - the best predictors of TPO performance. 

After accelerated heat aging at 275°F (135°C) for 196 days, EverGuard Extreme® 50- and 60-mil TPO showed no cracking - while every one of the competitors' samples failed! Guarantees are available up to 35 years and it's easier to install due to the large welding window. High 3-year aged reflectance of 0.72 can help reduce energy costs and it comes with the most complete line of accessories. 

The perfect choice if you're looking to avoid the expense of removing an existing roofing system before installing a new one. EverGuard Extreme® TPO is the best performing TPO in accelerated aging. After accelerated heat aging at 275°F (135°C) for 190 days, EverGuard Extreme® TPO showed no cracking - while every one of the competitors' samples failed.

Factory-applied polyester fleece provides additional protection to the membrane and means you won't need a slip sheet when re-covering over a variety of roofs. The fleece back also provides enhanced puncture resistance, especially in areas more prone to hail. It increases installation efficiency 2-3 times when installing fleece-back TPO with GAF 2-Part Roofing Adhesive (compared to standard TPO adhesives) and gives you the performance beyond a 60-mil standard TPO in a 50-mil product. Guarantees are available up to 25 years1 and it's easier to install due to the large welding window.

The perfect choice if you're looking to avoid the expense of removing an existing roofing system before installing a new one EverGuard Extreme® TPO is the best performing TPO in accelerated aging. After accelerated heat aging at 275°F (135°C) for 190 days, EverGuard Extreme® TPO showed no cracking - while every one of the competitors' samples failed.

Factory-applied polyester fleece provides additional protection to the membrane and means you won't need a slip sheet when re-covering over a variety of roofs. The fleece-back also provides enhanced puncture resistance, especially in areas more prone to hail. It increases installation efficiency 2-3 times when installing fleece-back TPO with GAF Two-Part Roofing Adhesive (compared to standard TPO adhesives). Guarantees are available up to 30 years1 and it's easier to install due to the large welding window.

The perfect choice if you're looking to avoid the expense of removing an existing roofing system before installing a new one.. EverGuard Extreme® TPO is the best performing TPO in accelerated aging. After accelerated heat aging at 275°F (135°C) for 190 days, EverGuard Extreme® 50-mil and 60-mil TPO showed no cracking - while every one of the competitors' samples failed.

Factory-applied polyester fleece provides additional protection to the membrane and means you won't need a slip sheet when re-covering over a variety of roofs. The fleece-back also provides enhanced puncture resistance, especially in areas more prone to hail. It increases installation efficiency 2-3 times when installing fleece-back TPO with GAF Two-Part Roofing Adhesive (compared to standard TPO adhesives). Guarantees are available up to 30 years and it's easier to install due to the large welding window.

The perfect choice if you're looking to avoid the expense of removing an existing roofing system before installing a new one. EverGuard Extreme® TPO is the best performing TPO in accelerated aging. After accelerated heat aging at 275°F (135°C) for 190 days, EverGuard Extreme® 50- and 60-mil TPO showed no cracking - while every one of the competitors' samples failed.

Factory-applied polyester fleece provides additional protection to the membrane and means you won't need a slip sheet when re-covering over a variety of roofs. The fleece back also provides enhanced puncture resistance, especially in areas more prone to hail. It increases installation efficiency 2-3 times when installing fleece-back TPO with GAF Two-Part Roofing Adhesive (compared to standard TPO adhesives). Guarantees are available up to 35 years and it's easier to install due to the large welding window.

The perfect choice if you're looking to avoid the expense of removing an existing roofing system before installing a new one. After accelerated heat aging at 275°F (135°C) for 105 days, an independent study proved EverGuard® 60-mil TPO showed no cracking—while almost every one of the competitors' samples failed! Guarantees are available up to 20 years when using EverGuard® TPO 45 mil Fleece-Back Membrane.1 The large welding window makes it easy to install and it is complemented by the most complete line of accessories.

The perfect choice if you're looking to avoid the expense of removing an existing roofing system before installing a new one. After accelerated heat aging at 275°F (135°C) for 105 days, an independent study proved EverGuard® 60-mil TPO showed no cracking - while almost every one of the competitors' samples failed!  Guarantees are available up to 25 years when using EverGuard® TPO 60-mil Fleece-Back Membrane.1 The large welding window makes it easy to install and it is complemented by the most complete line of accessories.

The perfect choice if you're looking to avoid the expense of removing an existing roofing system before installing a new one. After accelerated heat aging at 275°F (135°C) for 105 days, an independent study proved EverGuard® 60-mil TPO showed no cracking - while almost every one of the competitors' samples failed! Guarantees are available up to 30 years when using EverGuard® TPO Ultra 80-mil Fleece-Back Membrane.1 The large welding window makes it easy to install and it is complemented by the most complete line of accessories.

Great performance in a value-priced TPO roofing system. A recent study of EverGuard TPO roofs installed between 8 and 16 years ago found they all performed above ASTM standards for newly manufactured TPO. GAF analyzed membrane samples from roofs across the US and studied thickness over scrim, surface cracking, and the ability to repair aging TPO membranes.

Great performance in a value-priced TPO roofing system. A recent study of EverGuard TPO roofs installed between 8 and 16 years ago found they all performed above ASTM standards for newly manufactured TPO. GAF analyzed membrane samples from roofs across the US and studied thickness over scrim, surface cracking, and the ability to repair aging TPO membranes.

Great performance in a value-priced TPO roofing system. A recent study of EverGuard TPO roofs installed between 8 and 16 years ago found they all performed above ASTM standards for newly manufactured TPO. GAF analyzed membrane samples from roofs across the US and studied thickness over scrim, surface cracking, and the ability to repair aging TPO membranes.

GAF EverGuard® SA TPO Self-Adhered Roof Membrane is ready to install direct from the factory.

DATA SHEET

The TPO that can transform a traditional roof into an aesthetic attribute. EverGuard® TPO Single-Ply membrane is available in a wide range of pre-formulated colors. Matching accessories are also available as custom order items.

A primer designed for use with EverGuard® TPO membrane and EverGuard® Freedom™ self-adhered TPO products. Low VOC (<240 g/L) compliant primer for preparing metal and membrane for application of cover tape, and preparing membrane and pourable sealer pockets to apply EverGuard®One-Part Pourable Sealant.

EverGuard® TPO Primer is designed for use with EverGuard® TPO membranes and EverGuard® self-adhered TPO products.

A one-part, moisture-cure, self-leveling sealant designed for use in pitch pans on single-ply roof systems. Since moisture-cure sealants cure with moisture in the air, it is suitable for application in damp and cold climates, as well as in dry. EverGuard® One-Part Pourable Sealant is solvent free (less than 25 g/L VOC), contains no isocyanates, and because it is 100% solids, will not shrink upon curing. It is self-leveling, leaving a smooth, professional finished look with good color stability. It does not “outgas" or bubble on damp surfaces as urethane sealants often do.

EverGuard® One-Part Pourable Sealant is elastomeric and has excellent adhesion to most construction materials, has a 20-minute skin-over time, and is paintable within 24 hours. It has a low durometer, which accommodates greater movement in penetration seals than typical urethane sealants. No special tools or mixing is required and can be applied at temperatures as low as 30°F (-1°C).

Designed to seal the edges of the non-factory edges (cut edges) of the TPO membrane as a final step to reinforce membrane installation and inhibit water from traveling through the center scrim area.  

A one-part, butyl-based high-viscosity sealant, suitable for sealing between flashing membrane and substrate surfaces, behind exposed termination bars, and between roofing membrane and drain flanges.

A white solvent-based synthetic elastomeric sealant. FlexSeal™ Caulk Grade Sealant is an extremely flexible, durable, and UV resistant sealant. It will not chalk, crack, or peel and is ideal for termination bar, railing, step flashings, or edge metal.

A seam cleaner used to clean exposed or contaminated seams prior to heat welding to remove any residual soap or to revitalize aged membranes.

An extremely flexible and durable white solvent-based synthetic elastomeric sealant.

RepairPro Sealant is a solvent-based synthetic, self-leveling, elastomeric sealant. It is flexible, durable, and can be used on a variety of substrates.

45-mil Utility Flashing Strip is a thick reinforced membrane used for stripping in coated metal flanges.  

The 6" x 100' 45-mil reinforced TPO membrane with pressure-sensitive adhesive is installed on horizontal surfaces, using plates and fasteners as a base attachment in fully adhered and EverGuard® Freedom™ RapidSeam™ systems.

45-mil reinforced TPO with a 3" self adhered area and a 3" heat-weldable area.

UN-55 Detailing Membrane, a 55-mil thick unreinforced membrane used as an alternative flashing/reinforcement material for penetrations and corners, is required wherever preformed accessories can't be used.

EverGuard® Flexible TPO Detailing Membrane comes standard in White. The membrane is unreinforced, so it's easier to work with at difficult flashing details. 

GAF EverGuard® TPO 6" Cover Tape is a 6"-wide, non-reinforced TPO membrane backed with a butyl tape adhesive for use in stripping-in primed galvanized edge metal and to install RapidSeam™ end laps.

Made up of 30-mil unreinforced TPO and used to provide a warning to take caution around potential roof hazards. Easy to install, built to last for years, and requires little maintenance.

The EverGuard® TPO Walkway Roll is designed to protect the membrane in areas exposed to rooftop traffic for maintenance access or other uses, including HVAC, roof hatches, access doors, etc. The EverGuard® TPO Walkway Roll is required on a GAF-warranted roofing system.

In addition to a standard Gray TPO Walkway Roll, GAF has recently introduced Yellow Walkway Rolls to the market. These “safety" Yellow Walkway Rolls are great for sensitive areas of a roof such as perimeters, around skylights, or in areas of low clearance.

Conforming 55-mil thick unreinforced membrane seal for use over T-joints in 60-mil and greater thickness membrane applications.

Manufactured out of TPO-coated metal and 55-mil un-reinforced membrane for use in waterproofing wall scuppers, eliminating unnecessary flashing to waterproof the wall opening.

Metal sheets constructed with TPO membrane laminated to galvanized sheet metal. 24-gauge steel with a 25-mil thick membrane film that cuts and forms like standard sheet metal. 

Manufactured out of reinforced 45-mil TPO membrane and galvanized steel for use in venting low-slope mechanically attached roofs. Limited to one-way flow to avoid moisture buildup within the roofing structure and material. Also available in two-way vents.

EverGuard® Flexible T-Joint Cover Patches are created from a proprietary TPO formulation engineered to work with EverGuard® TPO single-ply membranes. EverGuard® TPO T-Joint Cover Patches create a membrane seal over T-joints that arise when installing a 60- or 80-mil EverGuard® TPO system.

One standard size of the 65-mil molded membrane Vent Boot accommodates 1"- 6" (25.4 mm - 152 mm) pipes and conduits. Vent Boots come with stainless steel clamping rings for the top of the penetration. 

Split pipe boots have an opening that can wrap around pipes and conduits and come in three standard sizes (see product properties below). Split pipe boots come with stainless steel clamping rings for the top of the penetration.

Fabricated from 45-mil thick reinforced TPO membrane, these tubes are fast, efficient alternatives to field fabrication. Split with a designed overlap so they can be wrapped around square or rectangular penetrations, square tube wraps come in three sizes (see product properties below) with stainless steel clamping rings for the top of the penetration.

Fabricated from 45-mil thick reinforced TPO membrane, these tubes are fast, efficient alternatives to field fabrication. Split with a designed overlap so they can be wrapped around square or rectangular penetrations, square tube wraps come in three sizes (see product properties below) with stainless steel clamping rings for the top of the penetration.

EverGuard® Flexible Split Pipe Boots are constructed from EverGuard® reinforced 45-mil membranes. Three standard sizes of Split Pipe Boots are available. Since they are split, they can be wrapped around pipes and conduits where closed boots cannot be used.

Molded with TPO compound to a nominal 70-mil thickness, it's perfect for irregular roof penetrations. Fill with EverGuard® One-Part Pourable Sealant or EverGuard® Two-Part Pourable Sealant for the perfect finish.

One standard size, 70-mil thick molded membrane that can be cut to accommodate use as either an inside or outside corner reinforcement.

8" diameter nominal 50-mil non-reinforced TPO membrane manufactured to accommodate imperfect corners and designed for ease of welding in tight areas.

EverGuard Extreme® Inside Corners are molded from a proprietary TPO formulation engineered to work with EverGuard Extreme® TPO single-ply membranes. Inside corners allow for fast flashing of base and curb corners. 

EverGuard® Flexible Fluted Corners are molded from a proprietary TPO formulation engineered to work with EverGuard® TPO single-ply membranes. Fluted Corners allow for easy flashing of non-uniform corners.

EverGuard® Flexible Inside Corners are molded from a proprietary TPO formulation engineered to work with EverGuard® TPO single-ply membranes. Inside Corners allow for fast flashing of base and curb corners.

Heat weldable drain that can be made watertight in seconds without using any tools.

One-piece seamless body manufactured from 0.125" 11-gauge spun aluminum used for depressed sump area for improved flow and to facilitate drainage. Incorporates U-Flow® Seal technology, a trademark of OMG Roofing Products, providing a mechanical watertight connection to PVC or cast iron pipes. TPO-coated flange for direct hot-air welding of TPO roof membranes.

EverGuard® TPO Quick Spray Adhesive is a sprayable, solvent-based contact adhesive useful for bonding smooth TPO membranes to various substrates. 

EverGuard® TPO Quick Spray Adhesive LV50 is a low VOC, solvent-based, sprayable, contact adhesive useful for bonding smooth TPO membranes to various substrates.

GAF LRF Adhesive XF is a two-component, construction-grade, low-rise polyurethane foam roofing adhesive.

TPO LRF Adhesive M Low Temp is a two-component, VOC-free, lowrise polyurethane foam adhesive that contains no solvents and can be used to adhere both insulation boards and TPO fleece-back membrane.

EverGuard® TPO Low VOC Bonding Adhesive is a contact-type bonding adhesive specially designed for bonding smooth back TPO single-ply roofing membranes and flashings to various roofing substrates. 

EverGuard® TPO 3 Square Low VOC Bonding Adhesive is a contact-type bonding adhesive specially designed for bonding TPO single-ply roofing membranes and flashings to various roofing substrates.

A fast-drying, solvent-based rubberized adhesive designed for use with smooth back TPO-based membranes. Easily applied using a roller, brush, or spray.

EverGuard® WB 181 Bonding Adhesive is compatible with concrete, masonry, metal, and wood flashing substrates. When installing with fleece-back TPO, EverGuard® WB 181 Bonding Adhesive has an up to 50% faster installation time than traditional smooth, fully-adhered systems. Its low VOC content with little-to-no odor reduces the disruption to building occupants.

OlyBond500® Equipment-Free Canister System is a two-component, low-rise polyurethane foam adhesive designed to adhere a variety of board stocks to most roof substrates in both new and re-roof applications, including jobs that require multiple insulation layers. The canisters have all of the same Factory Mutual approval ratings* as our other OlyBond500® options, and can be used for securing both insulation and fleece-back membranes.

Drill-Tec™ XHD® #15 Fasteners have an over-sized heavy shank and thread diameters for enhanced pull-out resistance in steel and aluminum roof decks to secure insulation and single-ply membrane to steel, O.S.B., or aluminum roof decks.

Drill-Tec™ SXHD Fasteners (#21) have over-sized heavy shank and thread diameters for enhanced pull-out resistance in light-gauge metal roof decks to secure single-ply membrane to 22 gauge or higher metal decks.

Drill-Tec™ CD-10 Fasteners have a diamond point that allows for easier installation and less chance of hole damage when securing insulation and single-ply membranes to structural concrete.

Drill-Tec™ RhinoBond® TPO XHD Plate are made of specially coated Galvalume® and have a round design that provides an even distribution of loads and eliminates sharp corners that can damage the membrane.

Drill-Tec™ RhinoBond® TPO SXHD Plate are made of specially coated Galvalume® and have a round design that provides an even distribution of loads and eliminates sharp corners that can damage the membrane.

EverGuard Coping is an FM-approved and ES-1-tested coping system with 20-gauge cleat designed to channel water to the roof, eliminating the need for caulking.

Two-piece system consisting of coping clips and coping cap helps prevent leaks and save on installation costs.

M-Weld™ Snap-on Coping is an FM-approved and ES-1-tested coping system with 20-gauge cleat designed to channel water to the roof, eliminating the need for caulking.

M-Weld™ Snap-on Coping is an FM-approved and ES-1-tested coping system with 20-gauge cleat designed to channel water to the roof, eliminating the need for caulking.

EverGuard® EdgeBox RI  is a perimeter edge metal blocking system made of engineered metal replacement system for roof nailers.

EverGuard® WR Box Gutters are 1-in. wide extruded internal gutter brackets for strength and support. Custom sized to meet your special requirements and designed with internal straps for smooth, clean lines and ease of installation.

EverGuard® WR Offset Box Gutters are 1" wide extruded internal gutter brackets for strength and support. Custom sized to meet your special requirements and designed with internal straps for smooth, clean lines and ease of installation.

WR Chamfer Box Gutters have a 1-in. wide extruded internal gutter bracket for strength and support. Custom sized to meet your special requirements and designed with internal straps for smooth, clean lines and ease of installation.

FM-approved and ES-1-tested snap-on fascia system that is an economical solution for single-ply membranes that are less than 60-mil thick.

Large 26-gauge metal perforations ensure strong membrane-to-membrane adhesion.

Everguard® Pro Extended Fascia clamps membrane like a termination bar and prevents wind & water from blowing under membrane.

Tested per ANSI/SPRI/FM 4435/ES-1 and easy to install.

EverGuard® EZ Fascia is made of formed galvanized steel, formed aluminum, or heavy-duty extruded aluminum for use with single-ply, Mod Bit, or BUR roofing systems.

Economically prefabricated metal edge for use with single-ply, modified, or BUR roof systems.

A two-piece snap-on fascia system with heavy-duty aluminum retainer to improve contractor productivity and enhance roof system performance.

This 24-gauge galvanized cleat clamps single-ply roof membrane against building like a termination bar to help prevent leaks.

Free-floating aluminum fascia for use with single-ply, Mod Bit, or BUR roofing systems. 

Eliminate the need to start with a brown roof and farm it for years, hoping and waiting for it to become a green roof. GAF is partnering with LiveRoof® to combine the proven performance of EverGuard® TPO and PVC membranes with the LiveRoof® patented, proven hybrid green roof system.

Installation

Each module arrives to the jobsite fully grown and is simply set in place on the rooftop.
During installation, the unique, patent-pending Soil Elevator™ is easily removed to allow for a seamless fit, which provides the look of a "built-in" system without the extensive, ongoing costs of maturation.

Systems offer a variety of plant options, with four system depths:

LiveRoof® Lite: For retrofit projects where load limitations exist

LiveRoof® Standard: Maximizes storm water management and integrates perfectly with both new construction and existing buildings

LiveRoof® Deep: Irrigated to expand plant biodiversity to an array of drought-resistant, conventional, and native perennials, grasses, and vegetables

LiveRoof® MAXX: Meets municipal codes in locales with 8-inch soil depth requirement; perimeter ballast supports drought-resistant perennials, grasses, and vegetables and can be used to optimize biodiversity

A tough, non-breathable synthetic anchor sheet designed and manufactured to meet industry and code requirements for self-adhered low-slope roofing applications. StormSafe™ Anchor Sheet's woven fabric creates a tough, durable reinforcement and its polypropylene coating makes it suitable for many applications. 

StormSafe™ Anchor Sheet is alkaline resistant, making it suitable for use over lightweight insulating concrete systems. The tough woven fabric makes it extremely tear resistant. In addition, the polypropylene coating ensures a good bond with both the butyl-adhesive of Freedom™ membranes and the SBS modified adhesive of LIBERTY™ SA Base/Ply and LIBERTY™ Cap membranes.  

A unique, patent-pending, fire-resistant slip sheet for installation within roofing assemblies where an increased fire rating is desired. t delivers superior protection against flame penetration and, in some cases, flame spread when installed in accordance with GAF Roofing System Specifications. It offers the highest fire ratings. One layer of VersaShield® Solo™ Fire-Resistant Slip Sheet qualifies for UL Class A Fire Ratings over combustible decks with no incline limitations. Our proprietary fire-resistant coating is applied to a heavy weight, dimensionally-stable fiberglass mat to ensure VersaShield® Solo™ Fire-Resistant Slip Sheet will roll out smoothly and lay flat.

Self-Adhered vapor retarder providing six (6) squares of coverage.

GAF SA Vapor Retarder XL is a self-adhered membrane used as a vapor retarder on insulated roof systems. It can be installed on most substrates, such as steel, concrete, plywood, gypsum or cement boards,and asphaltic panels.

An insulation board made of glass fiber-reinforced cellulosic felt facers bonded to a core of isocyanurate foam.

A roof insulation systems that virtually eliminates ponding water. EnergyGuard™ Tapered Polyiso Insulation provides a logical and economical answer for roofs that do not permit adequate positive drainage, like low-slope roofs.

When correctly installed, tapered insulation helps eliminate problems due to ponding water and can extend the longevity of your low-slope roofing system. It is readily available in the two most popular and efficient tapers, 1/8" (3.18 mm) per foot (305 mm) (1%) and 1/4" (6.35 mm) per foot (3.18 mm) (2%).

EnergyGuard™ Ultra Polyiso Insulation consists of coated glass-fiber mat facer laminated to a closed-cell polyisocyanurate foam core. EnergyGuard™ Ultra Polyiso Insulation manufactured in our plants uses the latest technology in manufacturing to provide a product of the highest quality

A roof insulation system that virtually eliminates ponding water. EnergyGuard™ Ultra Tapered Polyiso Insulation provides a logical and economical answer for roofs that do not permit adequate positive drainage, like low-slope roofs. When correctly installed, tapered insulation helps eliminate problems due to ponding water and can extend the longevity of your low-slope roofing system.  It is readily available in the two most popular and efficient tapers, 1/8" (3.18 mm) per foot (305 mm) (1%) and 1/4" (6.35 mm) per foot (3.18 mm) (2%).

EnergyGuard™ Barrier Polyiso Insulation is made of coated glass-fiber bonded to a core of isocyanurate foam and achieves an ANSI UL790 roof rating over combustible wood decks with a ½" board thickness.

A non-halogenated ultra polyiso insulation board that is better for the environment, since it does not contain potentially hazardous halogenated flame-retardant chemicals. EnergyGuard™ NH Polyiso Roof Insulation meets all the inherent properties and performance polyiso is known for, but does not contact any halogenated flame retardants – making it your best choice for a sustainable building design.

Economical answer for roofs that do not permit adequate positive drainage. EnergyGuard™ NH Polyiso Roof Insulation meets all the inherent properties and performance polyiso is known for, but does not contact any halogenated flame retardants – making it your best choice for a sustainable building design.

A non-halogenated polyiso insulation board can help contribute toward a sustainable building design. EnergyGuard™ NH Polyiso Roof Insulation maintains the same R-value when tested according to ASTM C1289 standard using the C518 test method at both a mean temperature of 40°F (4.4°C and 75°F (24°C) as well as improved R-values at 25°F (-3.9°C) over prior EnergyGuard™ NH Polyiso Roof Insulations.

A non-halogenated ultra polyiso insulation board that is better for the environment, since it does not contain potentially hazardous halogenated flame-retardant chemicals. EnergyGuard™ NH Ultra Polyiso Roof Insulation meets all the inherent properties and performance polyiso is known for, but does not contact any halogenated flame retardants – making it your best choice for a sustainable building design.

Durable coated glass fiber facer (CGF), bonded to a core of high-density polyiso, and designed to be used as a cover board for low-slope roof systems.

A new non-halogenated polyiso insulation board that's better for the environment, since it does not contain potentially hazardous halogenated flame-retardant chemicals. EnergyGuard™ NH HD Polyiso Roof Insulation meets all the inherent properties and performance polyiso is known for and has the highest R-value (2.5) of any cover board without any halogenated flame retardants – making it your best choice for a sustainable building design.

A new non-halogenated polyiso insulation board that's better for the environment, since it does not contain potentially hazardous halogenated flame-retardant chemicals. EnergyGuard™ NH HD Plus Polyiso Roof Insulation meets all the inherent properties and performance polyiso is known for and has the highest R-value (2.5) of any cover board without any halogenated flame retardants – making it your best choice for a sustainable building design.

EnergyGuard™ HD Barrier Achieves an ANSI UL790 roof rating over combustible wood decks without the use of a slip sheet and provides a sturdy substrate and protection for a roofing system. EnergyGuard™ HD Barrier has an R-value of 2.5, the highest of any non-Polyiso type of cover board, and also achieves an ANSI UL790 roof rating over combustible wood decks without the use of a slip sheet - and, at 11 lb. respectively per 4' x 8' board, it's a fraction of the weight of gypsum cover boards. With 80 psi compressive strength and a durable coated glass facer, EnergyGuard™ HD Barrier provides a sturdy substrate and protection for a roof  system.

An exceptional fire barrier, thermal barrier, and re-cover board used in various commercial roofing systems. The patented DensDeck® design employs glass mat facings front and back that are embedded into a water-resistant gypsum core providing excellent fire resistance, moisture resistance, and wind uplift properties.

The unique construction of DensDeck® provides excellent flute spanning that stiffens and provides increased foot traffic resistance to the roof deck. Additionally, DensDeck® has been shown to withstand de-lamination, deterioration, warping, and jobsite damage more effectively than other roofing membrane substrates such as paper-faced gypsum board, fiber board, and perlite insulation.

An exceptional fire barrier, thermal barrier, and re-cover board with a pre-primed surface to make the bond even stronger. The patented DensDeck® design employs glass mat facings front and back that are embedded into a water resistant and moisture resistant treated gypsum core, providing excellent fire resistance, moisture resistance, and wind uplift properties.

The unique construction of DensDeck® Prime Roof Boards provides excellent flute spanning and will help stiffen and stabilize the roof deck. Additionally, DensDeck® Prime has been shown to withstand de-lamination, deterioration, warping, and jobsite damage more effectively than roofing membrane substrates such as paper-faced gypsum board, fiberboard, and perlite insulation.

DensDeck® StormX™ Prime Roof Board is durable and is approved for use in assemblies meeting FM Very Severe Hail (VSH) Classification. DensDeck® StormX™ Prime Roof Board is a reinforced gypsum panel with an enhanced moisture-resistant core and coated glass mat facers and through use of GP's patented EONIC™ Technology maintains a high level of moisture resistance. 

DensDeck® StormX™ Prime Roof Board are classified by FM Global for VSH standards for impact resistance helping to reduce roof assembly storm damage.

USG Securock® Brand Gypsum-Fiber Roof Board is a high-performance roof board for use in low-slope roofing systems. Its unique fiber-reinforced, homogeneous composition gives the panel strength and water resistance through to the core.

1/2" (12.7 mm) UltraLight Glass-Mat Roof Board for mechanically attached low slope systems USG Securock® Brand UltraLight Glass-Mat Roof Board is a high-performance roof board for use in low-slope commercial roofing systems.  It enhances the durability of the entire roofing system when used as a cover board in single-ply mechanically attached systems. 

1/2" (12.7 mm) UltraLight Glass-Mat Roof Board for adhered attached low slope systems. USG Securock® Brand UltraLight Coated Glass-Mat Roof Board is a high-performance roof board for use in low-slop commercial roofing systems. It enhances the durability of the entire roofing system when used as a cover board in single-ply adhered systems.

A high-density fiberboard roof insulation with unique bonding characteristics that ultimately result in excellent adhesion capabilities. This product possesses unique bonding characteristics that ultimately result in excellent adhesion capabilities with the current membrane and other adhesive technology on the market today.

The unique Primed Red Coating allows for a solid membrane bond while still providing optimal square foot per gallon of adhesive coverage, ensuring a quality and cost-effective membrane installation.

Suitable for all types of single-ply systems including mechanically attached, ballasted, fully adhered, and RhinoBond®. PVC has excellent flexibility. It also has increased resistance to UV, ozone, chemicals, tears, and punctures. That along with heat-welded seams, a white reflective color, and how simple it is to repair and install makes it the right choice for your job.

Suitable for use in all types of single-ply systems including mechanically attached, ballasted, fully adhered, and RhinoBond®. PVC has excellent flexibility. It also has increased resistance to UV, ozone, chemicals, tears, and punctures. That along with heat-welded seams, a white reflective color, and how simple it is to repair and install makes it the right choice for your job.

Suitable for use in all types of single-ply systems including mechanically attached, ballasted, fully adhered, and RhinoBond®. PVC has excellent flexibility. It also has increased resistance to UV, ozone, chemicals, tears, and punctures. That along with heat-welded seams, a white reflective color, and how simple it is to repair and install makes it the right choice for your job. Guarantees are available up to 25 years when using EverGuard® PVC 80-mil Smooth Membrane.

Suitable for use in all types of single-ply systems including mechanically attached, ballasted, and fully adhered.. Guarantees are available up to 20 years when using EverGuard® PVC 50-mil Fleece-Back Membrane.1 The factory-applied polyester fleece provides additional protection to the membrane including no need for a slip sheet when re-covering over a variety of roofs and enhanced puncture resistance, especially in areas more prone to hail. Efficiency increases 2–3 times when installing fleece-back with Two-Part Canister Low Rise Foam Roofing Adhesive (compared to standard PVC adhesives). Those benefits along with heat-welded seams, a high reflectivity, and how simple it is to repair and install make it the right choice for your job.

Suitable for use in all types of single-ply systems including mechanically attached, ballasted, and fully adhered. Guarantees are available up to 20 years when using EverGuard® PVC 60-mil Fleece-Back Membrane.1 The factory-applied polyester fleece provides additional protection to the membrane including no need for a slip sheet when re-covering over a variety of roofs and enhanced puncture resistance, especially in areas more prone to hail. Efficiency increases 2–3 times when installing fleece-back with Two-Part Canister Low Rise Foam Roofing Adhesive (compared to standard PVC adhesives). Those benefits along with heat-welded seams, a high reflectivity, and how simple it is to repair and install make it the right choice for your job. 

Suitable for use in all types of single-ply systems including mechanically attached, ballasted, and fully adhered. Guarantees are available up to 25 years when using EverGuard® PVC 80-mil Fleece-Back Membrane.1 The factory-applied polyester fleece provides additional protection to the membrane including no need for a slip sheet when re-covering over a variety of roofs and enhanced puncture resistance, especially in areas more prone to hail. Efficiency increases 2–3 times when installing fleece-back with Two-Part Canister Low Rise Foam Roofing Adhesive (compared to standard PVC adhesives). Those benefits along with heat-welded seams, a high reflectivity, and how simple it is to repair and install make it the right choice for your job.   

Suitable for use in all types of single-ply systems including mechanically attached, ballasted, and fully adhered. PVC has excellent flexibility. It also has increased resistance to UV, ozone, chemicals, tears, and punctures. That along with heat-welded seams, a white reflective color, and how simple it is to repair and install makes it the right choice for your job. Guarantees are available up to 12 years when using EverGuard® PVC XK 50-mil Membrane.