Decorative Finishes, Stains and Sealers

CONTACT INFO

13240 Barton Circle
Whittier, CA 90605-3254
Toll Free: 800-875-4596
Fax: 562-944-9958

COMPANY OVERVIEW

Kemiko is a complete line of concrete floor products that create a decorative interior or exterior floor space. This line offers durable, low maintenance and eco-friendly zero/low VOC products, and most products meet LEED guidelines.

Since 1930, Kemiko's versatile products have provided unlimited design possibilities for creating visually stunning, unique and personalized concrete floors. Our premium quality concrete products include reactive stains, water and solvent based waxes, dyes, low VOC sealers, epoxy coatings, polyaspartic coatings, cleaners, strippers, vapor barrier sealers, and cementitious micro-toppings. Interior and exterior applications include: residences, patios, driveways, garages, warehouses, shopping malls, restaurants, countertops, garden statuary and tilt & retaining walls. Made in the USA.

ALL PRODUCTS

{{this.show}} {{this.hide}} Decorative Products

Neutra Clean™ Neutralizer and Degreaser image

Neutra Clean™ Neutralizer and Degreaser

NEUTRA CLEAN™ NEUTRALIZER AND DEGREASER is a water base, water viscosity, sodium metasilicate cleaner. This interior/exterior concrete degreaser is low VOC, free of hazardous solvents and very user friendly to apply. Neutra Clean is formulated to remove grease, grime, soil, wall plaster and other construction related residue. It cleans prepared concrete surfaces for staining, sealing and re-coating with Kemiko products. The concentrated formula dilutes with water. NEUTRA CLEAN™ is also the recommended neutralizer to be used during the application process for Stone Tone™ Concrete Acid Stain. It will stop the chemical reaction between Stone Tone™ Concrete Acid Stain and a concrete/cementitious surface
Stone Tone™ Concrete Acid Stain image

Stone Tone™ Concrete Acid Stain

STONE TONE™ CONCRETE STAIN is an acid base, reactive stain. This interior/exterior reactive stain is zero VOC, UV resistant and will not chip, fade or peel. Stone Tone Concrete Stain is formulated to chemically bond with the concrete to create permanent, unique colors that simulate the look of natural stone and marble. Stain colors are concentrated and can be diluted with water to create variations in color intensity. Available in 10 colors.
Rembrandt™ Polymer Stain image

Rembrandt™ Polymer Stain

REMBRANDT™ POLYMER STAIN is an acrylic urethane polymer stain. This interior/exterior polymer stain is low VOC, low odor, high durability and can be applied using a variety of methods and techniques. Rembrandt is formulated for excellent adhesion and uses high quality pigments for color and UV stability. Stain colors are semi-transparent and can be intermixed to create unlimited custom colors. These concentrated stain colors are mixed with a polymer base for application. Available in 18 colors.
Stone Tone™ Sealer II image

Stone Tone™ Sealer II

KEMIKO® STONE TONE SEALER II is a water base, single component, acrylic sealer. This interior/exterior non yellowing concrete sealer is low VOC and very user friendly to apply. Stone Tone Sealer II is formulated to provide resistance against staining, water penetration, acids, alkali and UV light. It seals and protects Kemiko Stone Tone Stained and Rembrandt Polymer Stained concrete. Available finishes: gloss and satin
Clear-A-Thane™ Sealer image

Clear-A-Thane™ Sealer

CLEAR-A-THANE™ SEALER is a water base, water viscosity, single component, acrylic urethane. This interior/exterior, non-yellowing concrete sealer is low VOC and very user friendly to apply. Clear-A-Thane is formulated to provide resistance against staining, water penetration, acids, alkali and UV light. Available finishes: gloss and satin
Repels™ Sealer image

Repels™ Sealer

REPELS™ SEALER is a water base, single component, silane/siloxane emulsion sealer. This exterior sealer is zero VOC, very user friendly to apply and provides excellent wetting properties. Repels is formulated to provide resistance against water penetration, frost damage, efflorescence, high alkalinity exposure and UV light. It seals and protects Kemiko Stone Tone Stained concrete and other cementitious substrates, including bare concrete, stucco, fired clay brick and mortars. Repels absorbs into the substrate to produce a natural sheen finish.
Stone Tone™ Buff-On Wax image

Stone Tone™ Buff-On Wax

STONE TONE™ BUFF-ON WAX is a single component wax offered in water and solvent base versions. This interior wax offers high protection and durability. Stone Tone Buff-On Wax is formulated to repel water and reduce scuffing and marring. It protects and maintains unsealed concrete, including over Kemiko Stone Tone Concrete Acid Stain, and other unsealed substrates, such as tile, brick and masonry surfaces. Stone Tone Buff-On Wax is applied using floor buffing equipment and produces a low sheen finish that allows the substrate to breathe.
Stone Tone™ Buff-On Wax II image

Stone Tone™ Buff-On Wax II

STONE TONE BUFF ON WAX II is a single component, water base wax. This interior wax offers high protection and durability. Stone Tone Buff-On Wax II is formulated to repel water and reduce scuffing and marring. It protects and maintains unsealed concrete, including over Kemiko Stone Tone stain and other unsealed substrates, such as tile, brick and masonry surfaces. Stone Tone Buff-On Wax II is applied using floor buffing equipment and produces a low sheen finish that allows the substrate to breathe.
Easy Shine™ Mop On Wax image

Easy Shine™ Mop On Wax

EASY SHINE™ MOP ON WAX is a water base, single component, acrylic polymer wax. This interior wax is low-VOC, low odor and very user friendly to apply. Easy Shine is formulated to repel water and reduce scuffing and marring. It protects and maintains sealed concrete and many other finished substrates. Easy Shine produces a deep, rich shine. Available finishes: gloss and satin.
Easy Strip™ Wax Stripper image

Easy Strip™ Wax Stripper

EASY STRIP™ WAX STRIPPER is a water base, water viscosity, single component wax stripper. This interior wax stripper is high performance, low odor and free of hazardous solvents. Easy Strip is formulated to easily remove Easy Shine Mop On Wax build up over stained, sealed or top coated Kemiko floor systems. Its concentrated formula dilutes with water.
Kemiko® Buildable Overlay image

Kemiko® Buildable Overlay

KEMIKO® BUILDABLE OVERLAY is a single component, high performance cementitious overlay with superior adhesive properties. It provides a refreshed interior or exterior concrete surface in commercial and residential environments. Buildable Overlay can be dyed, acid stained, acrylic stained or integrally colored and used with various decorative finishes, including stenciling, texturing and broom finish. It provides outstanding impact resistance and compressive strength.
Kemiko® Solvent Base Acrylic Sealer image

Kemiko® Solvent Base Acrylic Sealer

KEMIKO® SOLVENT BASE ACRYLIC SEALER is a solvent base, single component, deep penetrating sealer. This interior/exterior sealer is color enhancing, non-yellowing and very user friendly to apply. Kemiko Solvent Base Acrylic Sealer is formulated to provide resistance against staining, weathering and UV light. It seals and protects Kemiko Stone Tone Stained concrete and other cementitious substrates, including decorative and architectural surfaces, while allowing the substrate to breathe. Available finish: gloss

{{this.show}} {{this.hide}} Industrial Products

Cured Epoxy image

Cured Epoxy - KEMIKO® SS1120

KEMIKO® SS1120, formerly known as TRU-KOTE 100, is a two component polyamide amine cured epoxy. It is used in waterproofing and sealing above-grade and below-grade walls and floors. KEMIKO® SS1120 can be applied to properly prepared concrete walls, floors, and masonry walls exposed to damp conditions.
Clear Epoxy Coating image

Clear Epoxy Coating - KEMIKO® SS1202

KEMIKO® SS1202 is a 100% solids, low viscosity, and water clear epoxy coating designed to be used with color quartz and selected aggregate. It cures overnight to a blush free, resilient high gloss film.
Water Clear Epoxy Coating image

Water Clear Epoxy Coating - KEMIKO® SS1202 UVR

Kemiko SS1202 UVR is a 100% solids offering excellent ultraviolet resistance, low viscosity, 0-VOC, water clear epoxy coating. Kemiko SS1202 UVR has excellent chemical resistance, is designed to be used with color quartz and selected aggregate, is user friendly, and cures to a blush free, resilient high gloss film. Kemiko SS1202 UVR can be applied as a primer/finish on most interior cement floor surfaces. This product cures overnight. According to United States Department of Agriculture guidelines, this coating has been determined to be chemically acceptable for application to structural surfaces where there is a possibility of incidental food contact in official establishments operating under the Federal Meat and Poultry Products Inspection Program.
Epoxy Patching Compound image

Epoxy Patching Compound - KEMIKO® SS1301

Kemiko® SS1301 is a white viscous, non-sag, fiber reinforced, chemical resistant 100% solids epoxy filler/surfacer that offers 0-VOC and has excellent adhesion. Kemiko SS1301 is user friendly and cures to a resilient high abrasion resistant surfacer. This product can be applied as patching compound on most interior cement surfaces and steel substrates and top coated with most Kemiko products.
100% Solids Epoxy Commercial & Show Aquaria Coating image

100% Solids Epoxy Commercial & Show Aquaria Coating - KEMIKO® (Sta Crete) SS1500

KEMIKO® (STA CRETE) SS1500, formerly known as 18R Flex is a 100% solids, 0-VOC epoxy coating that has been specially formulated to coat marine show aquaria. SS1500 is applied to properly prepared concrete, fiberglass, and steel surfaces subject to continuous abrasion service and salt and chlorinated water immersion. The coating cures to a resilient porcelain-like high gloss film and is self priming on most surfaces. KEMIKO® (STA CRETE) SS1500 has been an industry standard for over thirty years.
Primer/Finish Epoxy image

Primer/Finish Epoxy - KEMIKO® SS1600 Colors

KEMIKO® SS1600 is a two component, water extended epoxy that offers excellent film properties, a long pot life, and is designed to be used as a thin film resilient primer/finish. KEMIKO® SS1600 can be applied on cement floors, steel, wood, plaster and even damp surfaces. Applications include any surface that requires a cost-effective, surface tolerant general maintenance coating.
Waterborne Low-VOC Epoxy Primer/Topcoat  image

Waterborne Low-VOC Epoxy Primer/Topcoat - KEMIKO® SS3400

KEMIKO® SS3400 is a Waterborne Low-VOC Epoxy Primer/Topcoat (SS3400) is a gloss, amine cured water extended epoxy coating that offers excellent adhesion, abrasion resistance, low odor, and is designed to be used as a thin resilient primer/topcoat.
Pigmented Epoxy Coating image

Pigmented Epoxy Coating - KEMIKO® SS3500

KEMIKO® SS3500 is a pigmented epoxy coating that offers excellent adhesion to properly prepared concrete and steel. This product can be applied as a primer/finish on most interior surfaces.
Quick-Dry Epoxy Coating image

Quick-Dry Epoxy Coating - KEMIKO® SS3700

Kemiko SS3700 is a high gloss, quick dry, water extended epoxy coating that offers excellent adhesion, abrasion resistance, low odor, and is designed to be used as a thin film resilient primer/finish. This product can be applied to cement, steel, wood and plaster surfaces. Kemiko SS3700 is USDA acceptable in food processing facilities, cures in 1-2 hours and is available in various colors.
Quick-Dry Epoxy Coating image

Quick-Dry Epoxy Coating - SS3700 CF

Kemiko SS3700 CF is a satin gloss, quick dry, water extended epoxy coating that offers excellent adhesion, abrasion resistance, low odor, and is designed to be used as a thin film resilient primer/finish. This product can be applied to cement, steel, wood and plaster surfaces. Kemiko SS3700 facilities, cures in 1-2 hours and is available in various colors.
UV Floor & Countertop Coatings image

UV Floor & Countertop Coatings

Our high-performance UV-curable floor coating system offers an advanced approach to floor protection and maintenance. UV Floor & Countertop Coatings are safer than traditional methods, are non flammable, have low odor, and contain no solvents or isocyanates. Not only does this product comply with VOC and HAP environmental mandates, it is also the most cost-effective method for protecting and maintaining your concrete floors. UV Floor & Countertop Coatings offer a comprehensive approach - a single component formulation and a mobile curing unit.

{{this.show}} {{this.hide}} Kemiko Colors

Kemiko Colors image

Kemiko Colors

Rembrandt Polymer Stain Colors Stone Tone Acid Stain Colors Kemiko Industrial colors

{{this.show}} {{this.hide}} Photo Gallery



password:  
Last Update: 2018-06-08