KOMBI Step Bridges
The KATTCLIMB aluminum step bridge systems allow for safe and easy access over pipes and other obstructions on the rooftop. These stair systems are typically at a 65 degree angle and are 24" in width. Non-penetrating options are available.
For Technical Support - Click Here
Architects Corner - Click Here
KATTCLIMB RL34
KATTCLIMB RL34 Fixed Ladder with Retractable Stiles for Roof Hatch Access
For Technical Support - Click Here
Architects Corner - Click Here
KATTCLIMB Fixed Ladder System
Made of high tensile, light-weight aluminum, the KATTCLIMB fixed ladders provide access between ground and roof, lower to upper roof levels, or to internal mezzanines and platforms.
These fixed ladders are ergonomically designed to provide user comfort as well as maximum safety. And as always, they are designed and manufactured to meet or exceed requirements for OSHA and ANSI compliance as applicable.
For Technical Support - Click Here
Architects Corner - Click Here
KATTCLIMB RL22
KATTCLIMB RL23
KATTCLIMB RL25
KATTCLIMB RL25 Angled Access Ladder with 3ft Walkway
For Technical Support - Click Here
Architects Corner - Click Here
KATTCLIMB RL31
KATTCLIMB RL32
KATTCLIMB RL33
KATTCLIMB RL21
KATTCLIMB RL35
KATTCLIMB RL35 Vertical Fixed Ladder with 3ft Walkway
For Technical Support - Click Here
Architects Corner - Click Here
KATTCLIMB RL41
KATTCLIMB RL42
KATTCLIMB RL43
KATTCLIMB RL43 Caged Fixed Ladder with Walkway
For Technical Support - Click Here
Architects Corner - Click Here
KATTCLIMB RL44
KATTCLIMB RL44 Caged Fixed Ladder with Retractable stiles for roof hatch access
For Technical Support - Click Here
Architects Corner - Click Here
KATTCLIMB RL45
KATTCLIMB RL62
Also designed for heights of 7 feet to 10 feet, the Commercial Fold Down Fixed Ladders series feature a ceiling cut-out of 48 inches by 31 inches. Commercial Suspension Kits also are available in various sizes - 39 inches, 68 inches and 118 inches. Ladder kits are available to span the distance between the fold down ladder frame and the roof hatch.
KATTCLIMB RL63
The Maxi series, which is designed for heights of 7 feet to 14 feet and a ceiling cut-out of 64 inches by 31 inches, is suitable for higher suspended ceiling construction. For this ladder series, Maxi Suspension Kits are available in three sizes - 39 inches, 68 inches and 118 inches. Ladder kits are available to span the distance between the fold down ladder frame and the roof hatch.
For Technical Support - Click Here
Architects Corner - Click Here
KATTGUARD GR31 Modular Rail Systems
The KATTGUARD GR31 aluminum permanent guardrail system provides the highest level of safety for maintenance personnel when working on rooftops and other fall risk areas. The GR31 guardrail is available for either internal side mount, external side mount or top mount applications.
For Technical Support - Click Here
Architects Corner - Click Here
KATTGUARD GR32 Modular Rail Systems
The KATTGUARD GR32 aluminum permanent guardrail system provides the highest level of safety for maintenance personnel when working on rooftops and other fall risk areas. The GR32 guardrail system is designed for profiled metal deck applications and can either be fastened down with self-sealing rivets to the metal deck or with non-penetrating clamps to suit the standing seam profile.
For Technical Support - Click Here
Architects Corner - Click Here
KATTGUARD GR33 External Wall Mount Guardrail
The KATTGUARD GR33 External Wall Mount Guardrail provides the highest level of passive safety for external wall mounted applications. KATTGUARD GR33 posts are positioned a maximum of 8ft on center. This system is sold in kit form to ensure all components are included for a seamless installation. Roof guardrail systems can be purchased by simply selecting the kit length(s) required, number of corner kits, wall termination kits, and ladder connection kits. KATTGUARD GR33 guardrail is simple and quick to install. This system can be easily customized on-site to suit specific site requirements.
KATTGUARD GR34 Free-Standing Modular Rail Systems
The KATTGUARD GR34 non-penetrating permanent guardrail system provides the highest level of safety for maintenance personnel when working at heights and other fall risk areas. The GR34 guardrail features a galvanized steel weighted base that is completely non- penetrating and sits on top of the roofing membrane.
KATTGUARD™ GR36 Surface Mount Aluminum Guardrail
The KATTGUARD™ GR36 Surface Mount Aluminum Guardrail is designed for sloped roof projects and applications where higher wind loads, ice build-up and snow loads are typical. The KATTGUARD™ GR36 system can be fastened down with the KATTPOINT™ Anchor System. The KATTPOINT™ Anchor is supplied with the project specific roof membrane pre-attached to ensure a waterproof connection and maintain the warranty. The KATTPOINT's are approved by all major manufacturers. This system can be easily customized on-site to suit specific site requirements.
For Technical Support - Click Here
Architects Corner - Click Here
FIXFAST USA
KATTGUARD Loading Gate -
The KATTGUARD Pallet Loading Gate provides safe and controlled access whilst loading palletized items onto elevated mezzanine areas using a forklift or other lifting device.
The pallet loading gate protects the fall edge during mezzanine loading operations ensuring the safety of workmen whilst in the danger area.
For Technical Support - Click Here
Architects Corner - Click Here
KATTGUARD Roof Hatch Guardrail System
The KATTGUARD Aluminum Roof Hatch Railing System is designed to meet OSHA requirements for safe entry through rooftop openings. This fixed railing system provides permanent fall protection for hatch openings including skylights and fire vents. The innovative clamping system eliminates the need to drill holes into the hatch or roof surface jeopardizing the roof warranty. This system installs in minutes with basic tools and does not require special training or certification for proper installation.
For Technical Support - Click Here
Architects Corner - Click Here
KATTWALK Roof Walkway Systems
The KATTWALK permanent walkway is a lightweight, non-corrosive aluminum walkway system which provides safe, designated access around the rooftop environment.
- Eliminates damage to roof surfaces
- Non penetration fastening option
- Simple, quick installation
- Advanced, multi directional non-slip surface
- Can be combined with the KATTSAFE guardrail to provide fall protection
For Technical Support - Click Here
Architects Corner - Click Here
DukMat Rooftop Walkway Systems -
DukMat Linear walkways provide safe, all-weather access for maintenance of rooftop services and frequently accessed areas, whilst protecting the roof membrane below from damage. DukMat is primarily designed for built-up and membrane roof applications.
KOMBI Ramps
The KATTCLIMB aluminum ramp systems allow for safe and easy access for carts and workers over pipes and other obstructions on the rooftop. Non-penetrating options are available.
For Technical Support - Click Here
Architects Corner - Click Here
KOMBI Ship Ladders
KOMBI® Aluminum Ship Ladders provide safe and easy access to varying height applications including service platforms, expansion joints, machinery, pipes, roof decks and other maintenance areas where frequent access is required by personnel. These ship ladders are manufactured at a 65 degree angle as standard and the width is 24 inches.
KOMBI® Aluminum Ship Ladders incorporate handrails and knee rails for added protection and stability. KOMBI® Systems are typically supplied in modules and therefore can simply be connected in field with ease.
For Technical Support - Click Here
Architects Corner - Click Here
KOMBI Step Bridges
The KATTCLIMB aluminum step bridge systems allow for safe and easy access over pipes and other obstructions on the rooftop. These stair systems are typically at a 65 degree angle and are 24" in width. Non-penetrating options are available.
For Technical Support - Click Here
Architects Corner - Click Here
KOMBI Stair Bridges
The KATTCLIMB aluminum stair bridge systems allow for safe and easy access over pipes and other obstructions on the rooftop. These stair systems are typically at a 45 degree angle. Non-penetrating options are available.
For Technical Support - Click Here
Architects Corner - Click Here
KOMBI Stair Systems
KOMBI® systems are made of three primary modules, namely the support module, the platform module and the stair module. Each module is available in a variety of sizes which can then be adjusted. Designed for easy customization, on-site assembly and with re-usable components, KOMBI® saves design costs and reduces delivery lead times.