engineered wood


323 Terrane Ridge
Peachtree City, GA 30269
Fax: 770-486-3588

USA reps       Canadian reps      



Lamco Forest Products patented Tongue & Grove Edge and Finger Joint technology optimizes the natural strength of Northern Quebec slow growing trees. It allows us to offer a full line of structural & architectural solid engineered wood products, all with superior physical properties, strength & stability. Our waste free process recycles all wood residues, making it the greenest in the industry.


{{}} {{this.hide}} LAMCO LFL® : Laminated Finger-Jointed Lumber

Floor & Ceiling Joists, Rim image

Floor & Ceiling Joists, Rim

  • Available in 4 grades: 1.6E, 1.7E, 1.9E & 2.1E.
  • Match any dimensional lumber or Engineered wood depth to 16".
  • Custom Depths and Precision End Trimmed (PET) available.
  • Easy installation using standard framing techniques.
  • Inexpensive common framing fasteners.
  • Cut & Notch like dimensional lumber according to Codes.
  • Available in the best design software: MITEK®, ITW ALPINE, CSD iStruct®, RISA® and RISA 3D®, Woodworks® and BlueLinx Doma Studio®, Simpson Strong-Tie.
Truss, Panel & Tall Wall image

Truss, Panel & Tall Wall

THICKNESS: LAMCO LFL® match well with 1 1/2" conventional lumber.

LENGTH: For long truss chords & large Tall Walls, our maximum 32' length products are integrated seamlessly into any factory environment, minimizing cutting & joints. For sizeable orders, LAMCO can precision trim your order & LAMCO LFL® can be installed directly without any cutting needed, saving on labor and time.

DENSITY: The Black Spruce in LAMCO LFL® is ideal for truss & wall panel production. Your truss chords & wall studs are installed without any special details or additional air or hydraulic pressure requirements, even with our LAMCO LFL® 2.1E.

STRENGTH: LAMCO LFL® comes in 4 grades with 1.6E & 1.7E replacing mostly MSR & LSL and 1.9E & 2.1E replacing mostly LVL.

STABILITY: LAMCO LFL® has been dried longer than standard truss & stud grades. Our unique composition prevents issues like "cupping", "swelling" or no. 1&2 MSR/MEL "cracking or checking".

DEPTH MATCH: Use LAMCO LFL® bottom chord in exact conventional lumber or I-Joist depths in your attic trusses to eliminate any stacking or on-site adjustments. Custom depths up to 16" are available for sizeable orders too.

ELITMINATE THE FLOOR TRUSS: You can get rid of that expensive 16" deep floor truss in the bottom chord of your bonus room trusses. With lengths up to 32', you can run one continuous piece. Keep 20' and 24' lengths in-stock & take them right to the truss jig when needed!

BEST CHOICE FOR TALL WALLS: You can save by replacing LSL in site built tall walls or in wall panel manufacturing. Reduce wood volume by spacing LAMCO LFL® TALL STUDS up to 24" & save up to 60% in panel assembly time.

SOFTWARE: Available in the best design software: MITEK, ITW ALPINE, iStruct, RISA and RISA 3D, Woodworks and BlueLinx's Doma StudioTM and Simpson Strong-Tie.

Plus, its better than other EWP Visual Appearencegives your clients the confidence they seek in a strong structural finished truss.
Beam & Header image

Beam & Header

  • STRONGER: LAMCO LFL® makes a great beam or header, often eliminating a ply.

  • SINGLE MEMBER: Because of its stability, LAMCO LFL® can be used as a single member up to 16".

  • THINNER: Our 1-7/16" width means you use less material than 1-3/4" LVL or LSL to do the same job saving you money.

  • ADVANCED FRAMING: Using LAMCO LFL® as a structural rimboard in multi-stage buildings, this Advanced Framing Technique allows builders to eliminate window headers completely in under stories and increase energy efficiency creating an ultimate wall opening detail.

    MULTIPLE PLY'S: LAMCO LFL® can be easily bolted or screwed from 3-ply to 5 ply without additional engineering required. ( Reference TER 1211-01 and TER 1401-01, page 6, chapter

    LAMCO LFL® HEADER: Easy Installation, Single-ply is often enough.
Rafters & Roof Framing image

Rafters & Roof Framing

  • You can frame with Ridge Board and Collar-Tie.
  • Engineered for 24"o.c optimized design spacing.
  • Every piece is "Straight and True": no more "wavy" roof.
  • Save time not having to "Crown or Valley" your pieces.
  • Save money knowing you'll use every piece.
  • Use conventional framing methods to cut your bevels and compound miter profiles.
  • For hangers and fasteners, use inexpensive & easy to find framing hardware.
  • Use our deeper depths to achieve insulating requirements of new building codes.
  • No bevel plates or stiffeners required because you can frame like dimensional lumber.

{{}} {{this.hide}} Finger Jointed Studs SPS-3

Finger Jointed Studs SPS-3 image

Finger Jointed Studs SPS-3


Strict raw materials selection
  • Lamco carefully sorts & selects raw material for each production (LAMCO LFL®,LAMFLOOR® & SPS-3 STUD)
Recycling from one production into another
  • After each production, raw materials that did not meet the quality requirements are cut to shorter lengths, defects are removed, the wood is reclassified (NLGA standards) and those short pieces are finger jointed into Lamco studs. In the end, any unused fiber is recycled into wood pellets.

Higher strength raw material: contains high volume of MSR lumber.

More joints per piece: always 3 or more.

Finger joints: 7/8" structural male/ female joints.

Available in 2x3, 2x4 & 2x6 Sizes: Depths: 2-7/16", 3-7/16" ,5-7/16", Thickness 1-7/16", Lengths up to 12'.

Glue: HEXION HRA series AG 5600(Heat Resistant Adhesive). Meets ASTM D-2559 & CSA O112.7-M1977 standards. Accepted in LEED projects.

Less wane, big knots, holes & fiber deviation than other studs on the market. No rot.

{{}} {{this.hide}} LAMFLOOR®

Structural Roof Decking & Wide Board Loft Flooring image

Structural Roof Decking & Wide Board Loft Flooring

Northeastern Jack Pine or Spruce Engineered Wood

  • Wide Board Flooring (Flat side covers 10 1/2" per board)
  • V-Groove Ceiling profile ( 2x6 T&G look )
  • Beautiful installed directly on joists or rafters
  • Easy to finish
  • * * NEW : ROUGH SAWN * *

Per popular demand, we are now offering ROUGH SAWN finish roof decking, available on the Wide Plank or V-joint side. Both are ideal to create the reclaimed barn wood look.

{{}} {{this.hide}} Lamfloor + Creativity = Endless Possibilities

Lamfloor Creativity  image

Lamfloor Creativity

A Log Home builder has found new ways to use LAMFLOOR, giving it its full potential. See it for yourself in his:
  • Studless Lamfloor walls
  • Lamfloor doors
  • Lamfloor kitchen & bathroom cabinets

{{}} {{this.hide}} Lamco Process & Sustainability

Lamco Process & Sustainability image

Lamco Process & Sustainability

THE PROCESS for both Structural & Architectural products uses patented Tongue & Grove Edge and Finger-Joint Technology.

Last Update: 2018-06-07