Commercial Roofing

CONTACT INFO

CONTENT

COMPANY OVERVIEW

IKO is a global leader in the manufacture and supply of asphaltic and bituminous waterproofing products, with over 30 strategically located production facilities throughout North America and Europe. And we continue to grow.

IKO doesn't just manufacture innovative products. We're also innovative in how our products are manufactured. Unlike competitive companies that rely on outside suppliers and producers, IKO is vertically integrated from top to bottom.

All the key components used in IKO roofing products are manufactured in-house, under our own stringent quality controls. This provides us with superior quality control over the finished products.

NOTHING TOPS IKO QUALITY
The commercial roofing products offered by IKO are manufactured by us, in our state-of-the-art facilities which are certified ISO 9001-2008 registered facilities. That allows us to maintain the highest quality control standards, and our people are committed to maintaining this calibre of excellence. That means you can rely on IKO for all your commercial roofing application needs-from the deck up.

WE STAND BEHIND OUR PRODUCTS
IKO offers a wide range of warranty programs to suit your individual needs, including Material Only, Limited Labour & Material, and our Diamond Shield Limited Warranty. Ask your IKO Representative which warranty program is right for you!

ALL PRODUCTS

{{this.show}} {{this.hide}} Asphalt Roofing Systems

Heat Welded Roofing System image

Heat Welded Roofing System - Torchflex™

IKO Industries' Heat Welded Roofing Systems include both base sheets and cap sheets that are heat welded. A wide variety of these systems are offered, including the rmourplast™ line of APP heat welded cap sheets, the PrevENt™ line of fire rated cap sheetsand the Torchflex™ line of SBS membranes in both base and cap sheets.

Fully Adhered Roofing Systems image

Fully Adhered Roofing Systems - Modiflex™

IKO Fully Adhered Roofing Systems include those that are adhered with hot mopped asphalt to allow joining of the membrane to the substrate. From PrevENt™ Fire Rated, Premium Heavy Duty Cap Sheets to Modiflex™ Cap and Base Sheets, these durable products will add strength and life to your roofing system.

Mechanically Attached Roofing Systems image

Mechanically Attached Roofing Systems - Torchflex™ Fast-N-Stick™

IKO mechanically attached roofing systems are known for consistency and durability, and include those that are secured with a fastener system. From Torchflex Cap Sheets to Fast-N-Stick™ Base Sheets, these proven products ensure a secure and reliable roofing system that contractors can rely on.

Fire Rated Roofing Systems image

Fire Rated Roofing Systems - PrevENt™

IKO Fire Rated Roofing Systems include those designed to handle extreme temperatures and to mitigate fire. The PrevENt™ line of polyester reinforced or composite fire rated cap sheets provide an extra protective coating and line of defense to IKO's premium asphalt based roofing systems.

Reflective Roofing Systems image

Reflective Roofing Systems - Carrara™ ArmourCool™ HD

IKO Reflective Roofing Systems include a full line of products with reflective properties designed to provide protection from the damaging effects of the sun and ultraviolet radiation. From ArmourCool™ to the new fire resistant Carrara™ ArmourCool HD, these membrane roofing systems are reinforced and built to last, providing peace of mind for and cost savings to the building owner.

Premium Heavy-Duty Composite Roofing Systems image

Premium Heavy-Duty Composite Roofing Systems - Torchflex™

IKO Premium Heavy-Duty (HD) Composite Roofing Systems include a tough composite reinforcement of non-woven polyester strengthened with a glass fiber scrim in both machine and cross directions. These HD membrane products are offered throughout the full line of asphalt systems. They include Fast-N-Stick™, Torchflex and PrevENt™ membranes, as well as the new eco friendly Carrara™ ArmourCool HD. These membrane roofing systems are built extra tough to last longer.

Cold-Applied Roofing Systems image

Cold-Applied Roofing Systems - Modiflex™

IKO Cold-Applied Roofing Systems include cold process adhesives that are suitable for use with Vapour Retarders and Modiflex™ Base and Cap Sheets. These cold-applied systems are also designed to adhere IKO Modiflex™ modified bitumen membranes
to steep and vertical surfaces.

Built-up Roofing Systems (BUR) image

Built-up Roofing Systems (BUR)

IKO Built-Up Roofing (BUR) Systems are composed of layers of roofing asphalt and asphalt felts which are installed so that the multiple interwoven plies form a roofing membrane. The key to this system is the repetitive layers. IKO Type IV and Type 6 Glass Ply Sheets and No. 15 Perforated Felt-Imperial stand out as durable built-up roofing membranes that contractors can rely on.

Self-Adhered Roofing Systems image

Self-Adhered Roofing Systems - Armourbond™, Armourvent™

IKO Self-Adhered Roofing Systems include the Armourbond and Armourvent line of membranes, which serve as an excellent base for the application of a heat-welded cap sheet or as a flashing detail designed for use in flame-sensitive areas. IKO S.A.M. Adhesive and Adhesive LVC products provide a quick-drying surface preparation for installing these membranes.

APP Modified Bitumen Roofing Systems image

APP Modified Bitumen Roofing Systems - Armourplast™

IKO APP Modified Bitumen Roofing Systems are asphalt based and constructed of a tough non-woven reinforced polyester mat strengthened with select glass fiber strands treated with Atactic Polypropylene (APP) polymers to impart “plastic" type qualities. IKO Armourplast™ Classic and Armourplast Granular APP modified bitumen membranes may be used as either a cap sheet or a base sheet, depending on the application.

{{this.show}} {{this.hide}} Roof Insulation & Cover Boards

Polyiso Insulation image

Polyiso Insulation - IKOTherm™

IKOTherm™ polyisocyanurate roofing insulation is constructed from a closed cell polyisocyanurate foam core bonded on each side to glass fiber reinforced kraft facers during the manufacturing process. IKOTherm III is coated with fiberglass facers during manufacturing. Strong and durable, IKO's polyiso thermal insulation adds to the R value of a roofing system, offers excellent compressive strength and performs well in fire tests. IKO AccuCut™ is our new service of custom-cutting polyisocyanurate insulation sheathing at the plant to specified sizes, while creating straight and clean edges that make installation easier.

Asphaltic Cover Board image

Asphaltic Cover Board - Protectoboard™

IKO offers Protectoboard™, which is composed of a mineral-fortified asphaltic core between two non-woven glass fiber mats. Ideal for re-roof applications or as a new substrate for a modified bitumen or BUR roofing membrane, asphaltic cover boards are dimensionally stable, providing strength and durability.

Specialty Cover Board image

Specialty Cover Board - ShieldBase™ 180


IKO's specialty cover boards are composite boards heat welded to a base sheet, with 100% adhesion of the membrane to the board in a factory controlled environment. They feature a self-adhering dual selvage technology and a competitive fastening pattern, providing an efficient system requiring minimal accessory products.

Polyiso HD Cover Board image

Polyiso HD Cover Board - IKOTherm™ CoverShield™

IKO's polyiso HD cover boards are constructed from a rigid, closed cell polyisocyanurate foam core bonded on each side to coated glass fiber facers during manufacturing. The product's inherently high thermal properties and compressive strength make it perfect for use as a cover board. IKO AccuCut™ is our new service of custom-cutting polyisocyanurate insulation sheathing at the plant to specified sizes, while creating straight and clean edges that make installation easier.

{{this.show}} {{this.hide}} Asphalt Products

Asphalt Type 1 image

Asphalt Type 1

IKO Asphalt Type 1
is a proven waterproofing material and is suitable for use in selected damp proofing or waterproofing applications. Processed under strict quality control standards in IKO's own oxidizing vessels, the product is available in bulk liquid. IKO's Type 1 Asphalt is an oxidized bitumen intended for use with organic felts, insulation and cover boards with slopes of 0-3/4:12 (0-6.25%).

Asphalt Type 2 image

Asphalt Type 2

IKO Asphalt Type 2
is a proven waterproofing material and is suitable for use in selected damp proofing and waterproofing applications. The product is an oxidized bitumen intended for use with organic felts, glass felts, modified membranes, insulation and cover boards with slopes of 0-1:12 (0-8%). Processed under strict quality control standards in IKO's own oxidizing vessels, Asphalt Type 2 is available in bulk liquid and 100 lb. kegs.

Asphalt Type 3 image

Asphalt Type 3

IKO Asphalt Type 3
is a proven waterproofing material and is suitable for use in selected damp proofing and waterproofing applications. The product is oxidized bitumen intended for use with glass felts, modified rolls, insulation and cover boards with a slope of 0-3:12 (0-25%). Processed under strict quality control standards in IKO's own oxidizing vessels, Asphalt Type 3 is available in bulk liquid and 100 lb. kegs.

Asphalt image

Asphalt - Easy-Melt™ 200

IKO Easy-Melt 200 Asphalt is an oxidized bitumen intended for use with glass felts, modified rolls, insulation, cover boards and flashing systems with slopes of 0 - 3:12 (0-25%). Easy-Melt 200 Asphalt combines top-of-the-line characteristics of standard Type III Asphalt with a proven waterproofing material suitable for use in selected damp proofing and waterproofing applications. Half the weight of asphalt kegs, Easy-Melt 200 Asphalt is wrapped in 50 lb. (22.7 kg) rectangular, polyethylene bags and is easily stored. Eliminating unnecessary waste, the product's packaging goes straight into the kettle, melting the asphalt with greater efficiency and leaving no residue.

Rubberized Bitumen Asphalt image

Rubberized Bitumen Asphalt - Modi-Melt™ SEBS

IKO Modi-Melt SEBS Rubberized Bitumen is intended for use with glass felts, modified membranes, insulation and cover boards with slopes of 0:12 to 3:12 (0-25%). A premium modified asphalt product, Modi-Melt SEBS combines standard Type III Asphalt with a proven waterproofing material suitable for use in selected damp proofing and waterproofing applications. Processed under strict quality control standards, Modi-Melt SEBS is a blend of select asphalt and SEBS rubbers, offering excellent elasticity, flexibility and strength over a large temperature range. Modi-Melt SEBS is sold in a convenient 50 lb. (22.7 kg) keg.

{{this.show}} {{this.hide}} Roofing Vapour Barriers

Vapour Barriers image

Vapour Barriers - IKO MVP (Modified Vapour Protector)

IKO MVP Modified Vapour Protector is a self-adhering membrane used over various types of roof decks such as steel, concrete or wood. This vapour retardant is composed of modified SBS asphalt with a top surface of high density cross laminated polyethylene film. This product is designed as a vapour retarder before the installation of the roof system and is not designed as a temporary waterproofing membrane. MVP should not be applied at temperatures below -10 degrees C. IKO MVP is available in either a film top (IKO MVP) or sand top surface (IKO MVP SAND) to suit a variety of cap sheet installation techniques.

Vapour Barriers image

Vapour Barriers - Torchflex™ TP-180-SF-Base (3.0 mm)

Torchflex TP-180-SF-Base (3.0) Heat Welded Base Sheet
consists of a tough non-woven reinforced polyester mat strengthened with select glass fiber strands that is coated with SBS polymers and premium quality asphalt both top and bottom to a thickness of approximately 3.0 mm (118 mils). The product's top surface is sanded to prevent sticking in the roll during application and the underside is covered with a thin micro-perforated film surface that conveniently disappears upon heat welding to the substrate. Torchflex TP-180-SF-Base (3.0) can also be used as a vapour retarder.

Vapor Barrier image

Vapor Barrier - Torchflex™ TF-95-SF-Base

Torchflex TF-95-SF-Base Heat Welded Base Sheet is constructed of an inorganic reinforcing mat of high strength non-woven glass fibers, which is coated with SBS polymers and premium quality asphalt both top and bottom. The surface of the product is sanded to prevent sticking in the roll during application and to allow cap sheets to be installed via mopping asphalt or an IKO-approved cold process adhesive. The underside is covered with a thin micro-perforated film surface that conveniently disappears upon heat welding to the substrate. Torchflex TF-95-SF-Base can be used as the “lay-flat" base sheet in a layered membrane construction system, and also as a vapour retarder.

Vapour Barriers image

Vapour Barriers - Armourbond™ Flash Sand

Armourbond Flash Sand Self-Adhering Base Sheet Flashing incorporates a tough non-woven reinforced polyester mat strengthened with select glass fiber strands that is coated with select SBS polymers and premium asphalt to a thickness of approximately 2.5 mm (98 mils). The top surface of the product is covered with sand, while the self-adhering underside is covered by a removable silicone treated release film. Armourbond Flash Sand may be placed in flame-sensitive areas for flashing details.

{{this.show}} {{this.hide}} Roofing Accessories

Roofing Adhesives, Mastics & Sealants image

Roofing Adhesives, Mastics & Sealants - IKO Cold Gold™ Field Adhesive

IKO's adhesives, mastics and sealants come in a wide range of options to meet the varying needs of today's contractor. From Cold Gold™ Field Adhesive and Flashing Adhesive to the Millennium™ Adhesive, these products are conveniently packaged for contractors.

Roofing Primers & Coatings image

Roofing Primers & Coatings - IKO S.A.M.™ Adhesive

IKO's primers and coatings are designed to prepare surfaces prior to the installation of membranes. These products are conveniently packaged in pails or aerosol cans.

Roof Tapes image

Roof Tapes - TorchTape™

IKO's TorchTape™ is constructed using tough non-woven reinforced polyester mat strengthened with select glass fiber strands coated with select SBS polymers and premium asphalt. Modiflex™ Tapes are constructed using an inorganic reinforcing mat of high strength non-woven glass fibers. These accessories are used primarily as fire tapes to prevent the penetration of open flames into joints, voids or gaps in any new combustible substrates.

Vegetative Roofing image

Vegetative Roofing

For information regarding vegetative roofing systems, please contact:
IKO Technical Services Ph: 1-888-766-2468

{{this.show}} {{this.hide}} Building Envelope Products

Weather Resistive Barriers image

Weather Resistive Barriers - AquaBarrier™ Tapes

IKO 2-IN-1 Insulated Weather-Resistive Barrier (WRB) system eliminates the need for a separate membrane system to control air and vapour. When IKO Enerfoil®
or IKO Ener-Air™ are used with IKO AquaBarrier™ Tapes they create a system that is designed to effectively control air and vapour on exterior walls, as well as act as an effective drainage plane. Additionally, this system reduces energy loss by diminishing thermal bridging via the formation of a continuous layer of insulation across the exterior face of the building.

Permeable Air/Vapour Barrier Systems image

Permeable Air/Vapour Barrier Systems - AquaBarrier™

IKO Ener-Air™ high performing polyisocyanurate rigid foam insulation sheathing system is an effective all-in-one product when joined together on a building exterior using IKO's AquaBarrier™ VP Tapes. The exterior then becomes an air barrier, a vapour barrier and wall insulation.

Non-Permeable Polyiso Wall Insulation image

Non-Permeable Polyiso Wall Insulation - AquaBarrier™

IKO's Non-Permeable Air/Vapour Barrier Systems include the AquaBarrier™ line of products and accessories. Engineered to meet or exceed industry standards for high performance, the line also includes self-adhering and torch-on wall membranes, through wall flashing membrane, foundation protection and flashing tapes.

{{this.show}} {{this.hide}} Wall Insulation

Non-Permeable Polyiso Wall Insulation image

Non-Permeable Polyiso Wall Insulation - IKO Enerfoil™

IKO's innovative building envelope insulation systems are at the forefront of wall design. IKO Enerfoil™ high performing polyisocyanurate rigid foam insulation
sheathing system is an effective all-in-one product when joined together on a building exterior using IKO's AquaBarrier™ Tapes. The exterior then becomes an air barrier, a vapour barrier and wall insulation. These non-permeable products are suitable for either new construction or retrofit applications. IKO AccuCut™ is our new service of custom-cutting polyisocyanurate insulation sheathing at the plant to specified sizes, while creating straight and clean edges that make installation easier.

Permeable Polyiso Wall Insulation image

Permeable Polyiso Wall Insulation - IKO Ener-Air™ Sheathing

IKO's innovative building envelope insulation systems are at the forefront of wall design. IKO Ener-Air™ high performing polyisocyanurate rigid foam insulation sheathing system is an effective all-in-one product when joined together on a building exterior using IKO's AquaBarrier™ VP Tapes. The permeable insulation is suitable for either new construction or retrofit applications.

{{this.show}} {{this.hide}} Building Envelope Accessories

Building Envelope Adhesives, Mastics & Sealants image

Building Envelope Adhesives, Mastics & Sealants

IKO's adhesives, mastics and sealants for the building envelope are compatible with IKO AquaBarrier™ line. These products are manufactured from asphalt, synthetic rubber, SBS modified, water based or VOC free polyurethane. They include AquaBarrier Mastic in pails and tubes and IKO S.A.M. Adhesive available in solvent based or low VOC as well as an aerosol can for small detail areas.

Primers & Coatings image

Primers & Coatings - IKO S.A.M.™


IKO's Primers and Coatings for the building envelope are designed to prepare surfaces prior to heat welding membranes. These products are conveniently packaged in pails or aerosol cans and are available in solvent-based, water-based and asphalt-based forms.

Backfill Protection image

Backfill Protection - Protectoboard™

IKO's Backfill Protection for the building envelope includes the Protectoboard™ line of mineral surfaced fiberglass reinforced asphaltic panels. The product is dimensionally stable and can be applied as a protective layer over the waterproofing membrane in a vertical wall. Protectoboard is available in a variety of lengths and widths.

{{this.show}} {{this.hide}} Bridge Deck Waterproofing

Waterproofing Membranes image

Waterproofing Membranes - ArmourBridge™ 45

ArmourBridge 45 Bridge, Deck and Waterproofing Membrane
is composed of a tough non-woven reinforced polyester mat strengthened with select glass fiber strands. It is then coated with select SBS polymers and premium asphalt to a superior thickness of approximately 4.5 mm (177 mils). Ceramic coated mineral granules are embedded in the product's surface to provide protection against abrasion and work traffic. A light micro-perforated film bonded to the underside of the product disappears after heat welding. ArmourBridge 45 Membrane is specifically designed for bridge and deck waterproofing, but also can be used in any heat welded waterproofing application where a rugged, premium membrane is required.

Waterproofing Membranes image

Waterproofing Membranes - AquaBarrier™ FP Foundation Protection

IKO AquaBarrier FP Foundation Protection is a self-adhering, cold-applied SBS modified composite sheet membrane designed to provide long-lasting and dependable primary waterproofing and foundation protection from the damaging effects of water. The product offers superior performance below grade and in other critical areas where waterproofing is required. It also may be used in balconies, parking decks, tunnels and foundation walls and can be applied to all common building substrates including concrete, gypsum, CMU and OSB. AquaBarrier FP is made by integrally bonding high-density, cross-laminated polyethylene to SBS modified rubberized asphalt. The back surfacing is a silicone treated paper, which is easily removed. AquaBarrier FP provides an effective barrier to moisture vapour transmission and air leakage when installed according to IKO specifications and used with S.A.M. or S.A.M. LVC Adhesive.

Waterproofing Membranes image

Waterproofing Membranes - AquaBarrier™ TG Torch Grade

IKO AquaBarrier TG 0.5 m and 1 m Air and Vapour Barriers are used in wall membrane assemblies and waterproofing applications, with proven results of air/vapour resistance. AquaBarrier TG is manufactured from an inorganic reinforcing mat of high strength non-woven glass fibers that is coated with select SBS polymers and premium asphalt. The product can be applied to a variety of substrates such as concrete, gypsum and CMU. When installed according to specifications and used with IKO Spray or Mod Bit primers, AquaBarrier TG provides an effective barrier to moisture vapour transmission and air leakage. Micro-perforated film is bonded to both sides of AquaBarrier TG, on the top side to provide superior lap adhesion and on the heat welded side, where it completely disappears during installation.

{{this.show}} {{this.hide}} Asphaltic Cover Board

Asphaltic Cover Boards image

Asphaltic Cover Boards - Protectoboard™

Protectoboard is a versatile asphaltic cover board composed of a mineral-fortified asphalt core between two layers of high-strength reinforcing fiberglass mat. While Protectoboard can be used as an overlay board in a conventional roof system, it also can be applied as a protection board in the waterproofing of bridge and podium decks, vertical walls and parking garages. The product is available in a wide variety of lengths and thicknesses, including 3 mm (1/8″), 4.8 mm (3/16″), 6 mm (1/4") and 12.7 mm (1/2").

{{this.show}} {{this.hide}} Bridge Deck Waterproofing Accessories

Bridge Deck Waterproofing Accessories image

Bridge Deck Waterproofing Accessories - IKO S.A.M.™ Adhesive

IKO S.A.M. Adhesive is a quick-drying, solvent-based surface preparation for use with IKO self-adhering roofing membranes or IKO AquaBarrier™ self-adhering wall membranes. IKO S.A.M Adhesive is suitable for use on most substrates including wood, glass mat/gypsum sheathing, masonry, concrete and metal. This product dries to a high tack, providing excellent adhesion properties during the application process, and is effective on both horizontal and vertical surfaces. Actual drying time depends on the ambient temperature and humidity during application. All substrates should be clean, dry and free from dust, dirt, oil and grease prior to application. IKO S.A.M. Adhesive may be applied by using a brush, roller, or by mechanically spraying and may be easily cleaned with mineral spirits or Xylene.

Bridge Deck Waterproofing Accessories image

Bridge Deck Waterproofing Accessories - IKO S.A.M.™ Adhesive LVC

IKO S.A.M. Adhesive LVC is a low Volatile Organic Compound (VOC) solvent-based primer for use with IKO self-adhering roofing membranes or IKO AquaBarrier™ self-adhering wall membranes. IKO S.A.M. Adhesive LVC is suitable for use on most substrates including wood, glass mat/gypsum sheathing, masonry, concrete and metal. All substrates should be clean, dry and free from dust, dirt, oil and grease. S.A.M. Adhesive LVC dries to a high tack, providing excellent adhesion properties during the application process, and is effective on both horizontal and vertical surfaces. Actual drying time depends on the ambient temperature and humidity during application. IKO S.A.M. Adhesive LVC may be applied by using a brush, roller or by mechanically spraying and may be easily cleaned with mineral spirits.

Bridge Deck Waterproofing Accessories image

Bridge Deck Waterproofing Accessories - AquaBarrier™ Mastic

IKO AquaBarrier Mastic is a unique, modified asphalt sealant that is formulated with synthetic rubbers for longevity and glass fibers for extra strength. AquaBarrier Mastic is fully compatible with IKO waterproofing, air and vapour barrier and roofing system products. It can be applied on damp or dry surfaces and will not slump or pull away from the substrate. AquaBarrier Mastic may be used in simple applications to repair loose shingles, flashings, chimneys and vents. Additional areas of use include sealing terminations, membrane edges and around penetrations. The product is available in a 10 kg pail or in convenient 300 ml and 825 ml tubes.

Bridge Deck Waterproofing Accessories image

Bridge Deck Waterproofing Accessories - IKO MS Detail

IKO MS Detail is a solvent-free, liquid-applied membrane coating that serves as an excellent waterproofing option for hard to flash-in areas. IKO MS Detail cures as a result of a chemical reaction with the ambient humidity and becomes a tough, monolithic waterproof membrane. This product was designed to coat and protect complex details such as flashings, mechanical equipment and roof/wall penetrations which would normally require intricate labor.

IKO Spray Primer image

IKO Spray Primer

IKO Spray Primer is a high-quality asphalt-based primer in an aerosol can. It may be used as a single coat when fast drying is needed to accelerate the roof system installation process. IKO Spray Primer is excellent for priming and sealing porous surfaces to improve the bonding of asphalt-based materials and also can be used as a corrosion resistant coating for metal. IKO Spray Primer is a versatile, one-coat application product and may be used to prime and/or seal gypsum, masonry, metal, wood, concrete, asphalt and other similar substrates in small detail areas.

IKO Mod Bit Primer image

IKO Mod Bit Primer

IKO Mod Bit Primer is solvent-based and intended to prepare roofing and wall surfaces prior to applying heat welded membranes. IKO Mod Bit Primer is formulated with a rubber modified bitumen and fast-evapourating solvents for quick drying. The modified bitumen enhances membrane adhesion to a variety of substrates such as gypsum, masonry, metal or concrete and improves membrane performance over a wide range of temperatures and conditions. IKO Mod Bit Primer can be applied with a brush, roller or sprayer.

IKO Water Based Adhesive image

IKO Water Based Adhesive

IKO Water Based Adhesive is a solvent-free primer intended for use with IKO self-adhering roof membranes, IKO AquaBarrier™ self-adhering membranes or IKO heat welded membrane products. IKO Water Based Adhesive is suitable for application on most substrates including wood, glass mat/gypsum sheathing, masonry, concrete and metal. IKO Water Based Adhesive dries to a high tack, providing excellent adhesion properties during the application process. The product is effective on both horizontal and vertical surfaces. Actual drying time depends on the ambient temperature and humidity level during application. IKO Water Based Primer may be applied using a brush, a roller or by mechanically spraying. All substrates should be clean, dry and free from dust, dirt, oil and grease. IKO Water Based Adhesive cleans up easily with mineral spirits.



password:  
Last Update: 2019-03-14